diff options
Diffstat (limited to 'src')
11 files changed, 84 insertions, 96 deletions
diff --git a/src/mainboard/google/dedede/variants/baseboard/Makefile.inc b/src/mainboard/google/dedede/variants/baseboard/Makefile.inc index a79e163b38..4f87de9c41 100644 --- a/src/mainboard/google/dedede/variants/baseboard/Makefile.inc +++ b/src/mainboard/google/dedede/variants/baseboard/Makefile.inc @@ -3,6 +3,5 @@ bootblock-y += gpio.c romstage-y += memory.c ramstage-y += gpio.c -ramstage-y += ramstage.c smm-y += gpio.c diff --git a/src/mainboard/google/dedede/variants/baseboard/ramstage.c b/src/mainboard/google/dedede/variants/baseboard/ramstage.c deleted file mode 100644 index aedaa3f656..0000000000 --- a/src/mainboard/google/dedede/variants/baseboard/ramstage.c +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - -#include <acpi/acpi_device.h> -#include <baseboard/variants.h> -#include <console/console.h> -#include <drivers/usb/acpi/chip.h> -#include <fw_config.h> -#include <gpio.h> -#include <soc/pci_devs.h> - -#define LTE_USB_PORT_ID 3 -#define LTE_USB_PORT_TYPE 2 - -void update_lte_device(struct acpi_gpio *lte_reset_gpio, struct acpi_gpio *lte_enable_gpio) -{ - struct device *xhci, *hub = NULL, *port = NULL; - struct drivers_usb_acpi_config *config; - - xhci = pcidev_path_on_root(PCH_DEVFN_XHCI); - if (!xhci) { - printk(BIOS_ERR, "%s: Could not locate XHCI device in DT\n", __func__); - return; - } - - while ((hub = dev_bus_each_child(xhci->link_list, hub)) != NULL) { - while ((port = dev_bus_each_child(hub->link_list, port)) != NULL) { - if (!port->chip_info || port->path.usb.port_id != LTE_USB_PORT_ID) - continue; - - if (fw_config_probe(FW_CONFIG(DB_PORTS, DB_PORTS_LTE_HDMI)) || - fw_config_probe(FW_CONFIG(DB_PORTS, DB_PORTS_1C_LTE)) || - fw_config_probe(FW_CONFIG(DB_PORTS, DB_PORTS_1A_HDMI_LTE))) { - - config = port->chip_info; - config->type = UPC_TYPE_INTERNAL; - if (port->path.usb.port_type == LTE_USB_PORT_TYPE) { - config->has_power_resource = 1; - memcpy(&config->reset_gpio, lte_reset_gpio, - sizeof(config->reset_gpio)); - config->reset_off_delay_ms = 20; - memcpy(&config->enable_gpio, lte_enable_gpio, - sizeof(config->enable_gpio)); - config->enable_delay_ms = 20; - } - } - } - } -} diff --git a/src/mainboard/google/dedede/variants/boten/overridetree.cb b/src/mainboard/google/dedede/variants/boten/overridetree.cb index d310f91f02..03f2e66131 100644 --- a/src/mainboard/google/dedede/variants/boten/overridetree.cb +++ b/src/mainboard/google/dedede/variants/boten/overridetree.cb @@ -151,7 +151,7 @@ chip soc/intel/jasperlake register "reset_off_delay_ms" = "10" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" register "enable_delay_ms" = "20" - device usb 2.3 on end + device usb 2.3 alias usb2_lte on end end chip drivers/usb/acpi register "desc" = ""UFCamera"" diff --git a/src/mainboard/google/dedede/variants/drawcia/overridetree.cb b/src/mainboard/google/dedede/variants/drawcia/overridetree.cb index 93ed85813e..cb3ff48979 100644 --- a/src/mainboard/google/dedede/variants/drawcia/overridetree.cb +++ b/src/mainboard/google/dedede/variants/drawcia/overridetree.cb @@ -151,13 +151,25 @@ chip soc/intel/jasperlake chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi - register "desc" = ""Multi-use Port"" + register "desc" = ""LTE"" + register "type" = "UPC_TYPE_INTERNAL" + register "group" = "ACPI_PLD_GROUP(2, 2)" + register "has_power_resource" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" + register "reset_off_delay_ms" = "20" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" + register "enable_delay_ms" = "20" + device usb 2.3 alias lte_usb2 on + probe DB_PORTS DB_PORTS_1A_HDMI_LTE + end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 2.3 on probe DB_PORTS DB_PORTS_1A_HDMI probe DB_PORTS DB_PORTS_1C_1A - probe DB_PORTS DB_PORTS_1A_HDMI_LTE end end chip drivers/usb/acpi @@ -166,13 +178,20 @@ chip soc/intel/jasperlake device usb 2.5 on end end chip drivers/usb/acpi - register "desc" = ""Multi-use Port"" + register "desc" = ""LTE"" + register "type" = "UPC_TYPE_INTERNAL" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 3.3 on + probe DB_PORTS DB_PORTS_1A_HDMI_LTE + end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" register "type" = "UPC_TYPE_USB3_A" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 3.3 on probe DB_PORTS DB_PORTS_1A_HDMI probe DB_PORTS DB_PORTS_1C_1A - probe DB_PORTS DB_PORTS_1A_HDMI_LTE end end end diff --git a/src/mainboard/google/dedede/variants/drawcia/ramstage.c b/src/mainboard/google/dedede/variants/drawcia/ramstage.c index 2500b96af7..26f1532274 100644 --- a/src/mainboard/google/dedede/variants/drawcia/ramstage.c +++ b/src/mainboard/google/dedede/variants/drawcia/ramstage.c @@ -2,19 +2,23 @@ #include <baseboard/variants.h> #include <boardid.h> - -static struct acpi_gpio lte_reset_gpio = ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H0); -static struct acpi_gpio lte_enable_gpio = ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10); -/* New lte reset for drapwer DVT*/ -static struct acpi_gpio lte_new_reset_gpio = ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17); +#include <device/device.h> +#include <drivers/usb/acpi/chip.h> void variant_devtree_update(void) { - uint32_t board_version = board_id(); + struct device *lte_usb2 = DEV_PTR(lte_usb2); + struct drivers_usb_acpi_config *config; + struct acpi_gpio lte_reset_gpio = ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H0); + + /* board version 9 is drawper EVT */ + if (board_version > 9) + return; + + if (lte_usb2 == NULL) + return; - if (board_version <= 9) /* board version 9 is drawper EVT */ - update_lte_device(<e_reset_gpio, <e_enable_gpio); - else - update_lte_device(<e_new_reset_gpio, <e_enable_gpio); + config = config_of(lte_usb2); + config->reset_gpio = lte_reset_gpio; } diff --git a/src/mainboard/google/dedede/variants/kracko/Makefile.inc b/src/mainboard/google/dedede/variants/kracko/Makefile.inc index 74121943dd..fd60a18b69 100644 --- a/src/mainboard/google/dedede/variants/kracko/Makefile.inc +++ b/src/mainboard/google/dedede/variants/kracko/Makefile.inc @@ -1,6 +1,5 @@ ## SPDX-License-Identifier: GPL-2.0-or-later ramstage-y += gpio.c -ramstage-y += ramstage.c smm-y += variant.c diff --git a/src/mainboard/google/dedede/variants/kracko/overridetree.cb b/src/mainboard/google/dedede/variants/kracko/overridetree.cb index 3561898b9b..36226de4b5 100644 --- a/src/mainboard/google/dedede/variants/kracko/overridetree.cb +++ b/src/mainboard/google/dedede/variants/kracko/overridetree.cb @@ -63,11 +63,23 @@ chip soc/intel/jasperlake chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi - register "desc" = ""Multi-use Port"" - register "type" = "UPC_TYPE_A" + register "desc" = ""LTE"" + register "type" = "UPC_TYPE_INTERNAL" register "group" = "ACPI_PLD_GROUP(2, 2)" + register "has_power_resource" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" + register "reset_off_delay_ms" = "20" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" + register "enable_delay_ms" = "20" device usb 2.3 on probe DB_PORTS DB_PORTS_1C_LTE + end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 2.3 on probe DB_PORTS DB_PORTS_1C_1A end end @@ -82,11 +94,18 @@ chip soc/intel/jasperlake device usb 2.6 on end end chip drivers/usb/acpi - register "desc" = ""Multi-use Port"" - register "type" = "UPC_TYPE_USB3_A" + register "desc" = ""LTE"" + register "type" = "UPC_TYPE_INTERNAL" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 3.3 on probe DB_PORTS DB_PORTS_1C_LTE + end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 3.3 on probe DB_PORTS DB_PORTS_1C_1A end end diff --git a/src/mainboard/google/dedede/variants/kracko/ramstage.c b/src/mainboard/google/dedede/variants/kracko/ramstage.c deleted file mode 100644 index 0faaec140a..0000000000 --- a/src/mainboard/google/dedede/variants/kracko/ramstage.c +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - -#include <baseboard/variants.h> - -static struct acpi_gpio lte_reset_gpio = ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17); -static struct acpi_gpio lte_enable_gpio = ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10); - -void variant_devtree_update(void) -{ - update_lte_device(<e_reset_gpio, <e_enable_gpio); -} diff --git a/src/mainboard/google/dedede/variants/metaknight/Makefile.inc b/src/mainboard/google/dedede/variants/metaknight/Makefile.inc index 2479ae9e66..67a7ab235a 100644 --- a/src/mainboard/google/dedede/variants/metaknight/Makefile.inc +++ b/src/mainboard/google/dedede/variants/metaknight/Makefile.inc @@ -1,6 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only ramstage-y += gpio.c -ramstage-y += ramstage.c smm-y += variant.c diff --git a/src/mainboard/google/dedede/variants/metaknight/overridetree.cb b/src/mainboard/google/dedede/variants/metaknight/overridetree.cb index d4c9ecaf4d..725750b654 100644 --- a/src/mainboard/google/dedede/variants/metaknight/overridetree.cb +++ b/src/mainboard/google/dedede/variants/metaknight/overridetree.cb @@ -109,12 +109,24 @@ chip soc/intel/jasperlake chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi - register "desc" = ""Multi-use Port"" + register "desc" = ""LTE"" + register "type" = "UPC_TYPE_INTERNAL" + register "group" = "ACPI_PLD_GROUP(2, 2)" + register "has_power_resource" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" + register "reset_off_delay_ms" = "20" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" + register "enable_delay_ms" = "20" + device usb 2.3 on + probe DB_PORTS DB_PORTS_LTE_HDMI + end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 2.3 on probe DB_PORTS DB_PORTS_1A_HDMI - probe DB_PORTS DB_PORTS_LTE_HDMI end end chip drivers/usb/acpi @@ -128,12 +140,19 @@ chip soc/intel/jasperlake device usb 2.6 on end end chip drivers/usb/acpi - register "desc" = ""Multi-use Port"" + register "desc" = ""LTE"" + register "type" = "UPC_TYPE_INTERNAL" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 3.3 on + probe DB_PORTS DB_PORTS_LTE_HDMI + end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" register "type" = "UPC_TYPE_USB3_A" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 3.3 on probe DB_PORTS DB_PORTS_1A_HDMI - probe DB_PORTS DB_PORTS_LTE_HDMI end end end diff --git a/src/mainboard/google/dedede/variants/metaknight/ramstage.c b/src/mainboard/google/dedede/variants/metaknight/ramstage.c deleted file mode 100644 index 0faaec140a..0000000000 --- a/src/mainboard/google/dedede/variants/metaknight/ramstage.c +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - -#include <baseboard/variants.h> - -static struct acpi_gpio lte_reset_gpio = ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17); -static struct acpi_gpio lte_enable_gpio = ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10); - -void variant_devtree_update(void) -{ - update_lte_device(<e_reset_gpio, <e_enable_gpio); -} |