summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/cpu/amd/model_lx/cache_as_ram.inc40
-rw-r--r--src/mainboard/amd/db800/cache_as_ram_auto.c60
2 files changed, 48 insertions, 52 deletions
diff --git a/src/cpu/amd/model_lx/cache_as_ram.inc b/src/cpu/amd/model_lx/cache_as_ram.inc
index ee4902a269..1abfd8168a 100644
--- a/src/cpu/amd/model_lx/cache_as_ram.inc
+++ b/src/cpu/amd/model_lx/cache_as_ram.inc
@@ -178,31 +178,28 @@ DCacheSetupGood:
call cache_as_ram_main
done_cache_as_ram_main:
- /* If you wanted to maintain the stack in memory you would need to set the tags as dirty
- so the wbinvd would push out the old stack contents to memory */
- /* Clear the cache, the following code from crt0.S.lb will setup a new stack*/
+ /* We now run over the stack-in-cache, copying it back to itself to invalidate the cache */
+
+ push %edi
+ mov $(CONFIG_DCACHE_RAM_SIZE/4),%ecx
+ push %esi
+ mov $(CONFIG_DCACHE_RAM_BASE),%edi
+ mov %edi,%esi
+ cld
+ rep movsl %ds:(%esi),%es:(%edi)
+ pop %esi
+ pop %edi
+
+ /* Clear the cache out to ram */
wbinvd
-
-/* the following code is from crt0.S.lb */
-/* This takes the place of the post-CAR funtions that the K8 uses to setup the stack and copy LB low.*/
-
-#ifndef CONSOLE_DEBUG_TX_STRING
- /* uses: esp, ebx, ax, dx */
-# define __CRT_CONSOLE_TX_STRING(string) \
- mov string, %ebx ; \
- CALLSP(crt_console_tx_string)
-
-# if defined(CONFIG_TTYS0_BASE) && (ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG)
-# define CONSOLE_DEBUG_TX_STRING(string) __CRT_CONSOLE_TX_STRING(string)
-# else
-# define CONSOLE_DEBUG_TX_STRING(string)
-# endif
-#endif
+ /* re-enable the cache */
+ movl %cr0, %eax
+ xorl $(CR0_CD + CR0_NW), %eax /* clear the CD and NW bits */
+ movl %eax, %cr0
/* clear boot_complete flag */
xorl %ebp, %ebp
__main:
- CONSOLE_DEBUG_TX_STRING($str_copying_to_ram)
/*
* Copy data into RAM and clear the BSS. Since these segments
@@ -218,9 +215,6 @@ __main:
* Normally this is copying from FLASH ROM to RAM.
*/
movl %ebp, %esi
- /* FIXME: look for a proper place for the stack */
- movl $0x4000000, %esp
- movl %esp, %ebp
pushl %esi
pushl $str_coreboot_ram_name
call cbfs_and_run_core
diff --git a/src/mainboard/amd/db800/cache_as_ram_auto.c b/src/mainboard/amd/db800/cache_as_ram_auto.c
index 5ee6dbb748..c18b0bb154 100644
--- a/src/mainboard/amd/db800/cache_as_ram_auto.c
+++ b/src/mainboard/amd/db800/cache_as_ram_auto.c
@@ -35,6 +35,7 @@
#include <cpu/amd/geode_post_code.h>
#include "southbridge/amd/cs5536/cs5536.h"
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
#define POST_CODE(x) outb(x, 0x80)
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -60,37 +61,38 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
+struct msrinit {
+ u32 msrnum;
+ msr_t msr;
+ };
+
+static const struct msrinit msr_table[] =
+{
+ {CPU_RCONF_DEFAULT, {.hi = 0x24fffc02,.lo = 0x1000A000}}, /* Setup access to cache under 1MB.
+ * Rom Properties: Write Serialize, WriteProtect.
+ * RomBase: 0xFFFC0
+ * SysTop to RomBase Properties: Write Serialize, Cache Disable.
+ * SysTop: 0x000A0
+ * System Memory Properties: (Write Back) */
+ {CPU_RCONF_A0_BF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xA0000-0xBFFFF : (Write Back) */
+ {CPU_RCONF_C0_DF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xC0000-0xDFFFF : (Write Back) */
+ {CPU_RCONF_E0_FF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xE0000-0xFFFFF : (Write Back) */
+
+ /* Setup access to memory under 1MB. Note: VGA hole at 0xA0000-0xBFFFF */
+ {MSR_GLIU0_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
+ {MSR_GLIU0_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
+ {MSR_GLIU0_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
+ {MSR_GLIU1_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
+ {MSR_GLIU1_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
+ {MSR_GLIU1_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
+};
+
+
static void msr_init(void)
{
- msr_t msr;
-
- /* Setup access to the cache for under 1MB. */
- msr.hi = 0x24fffc02;
- msr.lo = 0x1000A000; /* 0-A0000 write back */
- wrmsr(CPU_RCONF_DEFAULT, msr);
-
- msr.hi = 0x0; /* Write back */
- msr.lo = 0x0;
- wrmsr(CPU_RCONF_A0_BF, msr);
- wrmsr(CPU_RCONF_C0_DF, msr);
- wrmsr(CPU_RCONF_E0_FF, msr);
-
- /* Setup access to the cache for under 640K. Note MC not setup yet. */
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU0 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU0 + 0x21, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU1 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU1 + 0x21, msr);
+ int i;
+ for (i = 0; i < ARRAY_SIZE(msr_table); i++)
+ wrmsr(msr_table[i].msrnum, msr_table[i].msr);
}
static void mb_gpio_init(void)