diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/snowridge/FspUpd.h | 48 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/snowridge/FspmUpd.h | 907 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/snowridge/FspsUpd.h | 337 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/snowridge/FsptUpd.h | 93 |
4 files changed, 1385 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/snowridge/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/snowridge/FspUpd.h new file mode 100644 index 0000000000..0aaa134a0e --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/snowridge/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2024, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F445055434F53 /* 'SOCUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F445055434F53 /* 'SOCUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F445055434F53 /* 'SOCUPD_S' */ + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/snowridge/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/snowridge/FspmUpd.h new file mode 100644 index 0000000000..715aa7317a --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/snowridge/FspmUpd.h @@ -0,0 +1,907 @@ +/** @file + +Copyright (c) 2024, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + +#define MAX_CHANNEL 2 /* Maximum Number of Memory Channels */ +#define MAX_DIMM 2 /* Maximum Number of DIMMs PER Memory Channel */ +#define MAX_SPD_BYTES 512 /* Maximum Number of SPD bytes */ +#define MAX_USB_PORTS 4 + +/* +* SMBIOS Memory Info structures. +*/ +typedef struct { + UINT8 DimmId; + UINT32 SizeInMb; + UINT16 MfgId; + UINT8 ModulePartNum[20]; /* Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes */ +} DIMM_INFO; + +typedef struct { + UINT8 ChannelId; + UINT8 DimmCount; + DIMM_INFO DimmInfo[MAX_DIMM]; +} CHANNEL_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT16 MemoryType; + UINT16 MemoryFrequencyInMHz; + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + UINT8 ChannelCount; + CHANNEL_INFO ChannelInfo[MAX_CHANNEL]; +} FSP_SMBIOS_MEMORY_INFO; + +typedef struct { + UINT32 PerfSig; + UINT16 PerfLen; + UINT16 Reserved4; + UINT32 PerfIdx; + UINT64 PerfData[32]; +} FSP_PERF_INFO; + +#define BL_MAX_FIA_LANES 24 +#define BL_FIA_LANE_OVERRIDE_DISABLED 0xff +#define BL_FIA_LANE_DISABLED 0x0 +#define BL_FIA_LANE_PCIE 0x1 +#define BL_FIA_LANE_SATA 0x2 +#define BL_FIA_LANE_XHCI 0x3 +#define BL_FIA_LANE_PCIE_ROOT_PORT_LINK_WIDTH_SET_BY_BICTRL 0x0 +#define BL_FIA_LANE_PCIE_ROOT_PORT_LINK_WIDTH_X1 0x1 + +typedef struct { + UINT8 FiaLaneConfig[BL_MAX_FIA_LANES]; + UINT8 FiaLaneLinkWidth[BL_MAX_FIA_LANES]; +} BL_HSIO_INFORMATION; + +/** + This structure holds the DLL configuration + register values that will be programmed by RC. + Those policies should be used by platform if default values + provided by RC are not sufficient to provide stable operation + at all supported speed modes. RC will blindly set the DLL values + as provided in this structure. + + For help with obtaining valid DLL values for your platform please + contact enabling support. +**/ +typedef struct { + UINT32 TxCmdDelayControl; // Offset 820h: Tx CMD Delay Control + UINT32 TxDataDelayControl1; // Offset 824h: Tx Data Delay Control 1 + UINT32 TxDataDelayControl2; // Offset 828h: Tx Data Delay Control 2 + UINT32 RxCmdDataDelayControl1; // Offset 82Ch: Rx CMD + Data Delay Control 1 + UINT32 RxCmdDataDelayControl2; // Offset 834h: Rx CMD + Data Delay Control 2 + UINT32 RxStrobeDelayControl; // Offset 830h: Rx Strobe Delay Control, valid only for eMMC +} BL_SCS_SD_DLL; + +/** + Definition of FIA OVERRIDE STATUS HOB + Get/Set Status are defined by their respective Get/Set MeFiaMuxConfig functions called in PeiFiaMuxConfigInitLib. + + FIA MUX configuration is based on platform design and generally set by soft straps. + FIA MUX configuration can change the generic lane assignment through the FSP UPDs to increase flexibility. + FIA_OVERRIDE_STATUS_HOB allows the FSP to provide the required feedback + on the update of the FIA MUX configuration to the customer's bootloader. +**/ +typedef struct { + UINT32 FiaMuxConfigGetStatus; // Status returned by MeFiaMuxConfigGet (MeFiaMuxLib) + UINT32 FiaMuxConfigSetStatus; // Status returned by MeFiaMuxConfigSet (MeFiaMuxLib) + BOOLEAN FiaMuxConfigSetRequired; // Indicates that a set was required in the FIA lane assignment. + // FALSE = the requested config matched the existing one. + // TRUE = the requested config did not match the existing one. +} BL_FIA_OVERRIDE_STATUS_HOB; + + +// +// Data Types +// +#ifndef UINT64_STRUCT_T +#define UINT64_STRUCT_T +typedef union { + struct { + UINT32 Low; + UINT32 High; + } Data32; + UINT64 Data; +} BL_UINT64_STRUCT; +#endif // UINT64_STRUCT_T + +/// +/// RC version number structure. +/// +typedef struct { + UINT8 Major; + UINT8 Minor; + UINT8 Revision; + UINT16 BuildNumber; +} BL_RC_VERSION; + +#define BL_MAX_CHA_MAP 1 +#define BL_MAX_FW_KTI_PORTS 3 +#define BL_MAX_SOCKET 1 +#define BL_NUMBER_PORTS_PER_SOCKET 5 +#define BL_TYPE_MAX_MMIO_BAR 11 +#define BL_MAX_IMC 1 +#define BL_MAX_CH 2 +#define BL_MAX_LOGIC_IIO_STACK 8 +#define BL_MAX_IIO_STACK 6 +#define BL_MaxIIO BL_MAX_SOCKET +#define BL_MC_MAX_NODE (BL_MAX_SOCKET * BL_MAX_IMC) + + +typedef struct { + UINT8 Valid; // TRUE, if the link is valid (i.e reached normal operation) + UINT8 PeerSocId; // Socket ID + UINT8 PeerSocType; // Socket Type (0 - CPU; 1 - IIO) + UINT8 PeerPort; // Port of the peer socket +}BL_QPI_PEER_DATA; + +typedef struct { + UINT8 Valid; + UINT32 MmioBar[BL_TYPE_MAX_MMIO_BAR]; + UINT8 PcieSegment; + BL_UINT64_STRUCT SegMmcfgBase; + UINT16 stackPresentBitmap; + UINT16 M2PciePresentBitmap; + UINT8 TotM3Kti; + UINT8 TotCha; + UINT32 ChaList[BL_MAX_CHA_MAP]; + UINT32 SocId; + BL_QPI_PEER_DATA PeerInfo[BL_MAX_FW_KTI_PORTS]; // QPI LEP info +} BL_QPI_CPU_DATA; + +typedef struct { + UINT8 Valid; + UINT8 SocId; + BL_QPI_PEER_DATA PeerInfo[BL_MAX_SOCKET]; // QPI LEP info +} BL_QPI_IIO_DATA; + +typedef struct { + UINT8 Device; + UINT8 Function; +} BL_IIO_PORT_INFO; + +typedef struct { + BL_IIO_PORT_INFO PortInfo[BL_NUMBER_PORTS_PER_SOCKET]; +} BL_IIO_DMI_PCIE_INFO; + +typedef struct _BL_STACK_RES { + UINT8 Personality; // Refer to BL_STACK_TYPE for the meaning of this field. + UINT8 BusBase; + UINT8 BusLimit; + UINT16 PciResourceIoBase; + UINT16 PciResourceIoLimit; + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this stack in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this stack in memory map + UINT64 Mmio64Base; // Base of high MMIO configured for this stack in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this stack in memory map + UINT32 PciResourceMem32Base; // Base of low MMIO resource available for PCI devices + UINT32 PciResourceMem32Limit; // Limit of low MMIO resource available for PCI devices + UINT64 PciResourceMem64Base; // Base of high MMIO resource available for PCI devices + UINT64 PciResourceMem64Limit; // Limit of high MMIO resource available for PCI devices + UINT32 VtdBarAddress; + UINT32 Mmio32MinSize; // Minimum required size of MMIO32 resource needed for this stack +} BL_STACK_RES; + +typedef struct { + UINT8 Valid; + UINT8 SocketID; // Socket ID of the IIO (0..3) + UINT8 BusBase; + UINT8 BusLimit; + UINT16 PciResourceIoBase; + UINT16 PciResourceIoLimit; + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this socket in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this socket in memory map + UINT64 Mmio64Base; // Base of high MMIO configured for this socket in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this socket in memory map + BL_STACK_RES StackRes[BL_MAX_LOGIC_IIO_STACK]; + UINT32 RcBaseAddress; + BL_IIO_DMI_PCIE_INFO PcieInfo; + UINT8 DmaDeviceCount; +} BL_IIO_RESOURCE_INSTANCE; + +typedef struct { + UINT16 PlatGlobalIoBase; // Global IO Base + UINT16 PlatGlobalIoLimit; // Global IO Limit + UINT32 PlatGlobalMmio32Base; // Global Mmiol base + UINT32 PlatGlobalMmio32Limit; // Global Mmiol limit + UINT64 PlatGlobalMmio64Base; // Global Mmioh Base [43:0] + UINT64 PlatGlobalMmio64Limit; // Global Mmioh Limit [43:0] + BL_QPI_CPU_DATA CpuQpiInfo[BL_MAX_SOCKET]; // QPI related info per CPU + BL_QPI_IIO_DATA IioQpiInfo[BL_MAX_SOCKET]; // QPI related info per IIO + UINT32 MemTsegSize; + UINT32 MemIedSize; + UINT64 PciExpressBase; + UINT32 PciExpressSize; + UINT32 MemTolm; + BL_IIO_RESOURCE_INSTANCE IIO_resource[BL_MAX_SOCKET]; + UINT8 numofIIO; + UINT8 MaxBusNumber; + UINT32 packageBspApicID[BL_MAX_SOCKET]; // This data array is valid only for SBSP, not for non-SBSP CPUs. <AS> for CpuSv + UINT8 EVMode; + UINT8 Pci64BitResourceAllocation; + UINT8 SkuPersonality[BL_MAX_SOCKET]; + UINT8 VMDStackEnable[BL_MaxIIO][BL_MAX_IIO_STACK]; + UINT16 IoGranularity; + UINT32 MmiolGranularity; + BL_UINT64_STRUCT MmiohGranularity; + UINT8 RemoteRequestThreshold; //5370389 + UINT32 UboxMmioSize; + UINT32 MaxAddressBits; +} BL_PLATFORM_DATA; + +typedef struct { + UINT8 CurrentUpiiLinkSpeed;// Current programmed UPI Link speed (Slow/Full speed mode) + UINT8 CurrentUpiLinkFrequency; // Current requested UPI Link frequency (in GT) + UINT8 OutKtiCpuSktHotPlugEn; // 0 - Disabled, 1 - Enabled for PM X2APIC + UINT32 OutKtiPerLinkL1En[BL_MAX_SOCKET]; // output kti link enabled status for PM + UINT8 IsocEnable; + UINT32 meRequestedSize; // Size of the memory range requested by ME FW, in MB + UINT32 ieRequestedSize; // Size of the memory range requested by IE FW, in MB + UINT8 DmiVc1; + UINT8 DmiVcm; + UINT32 CpuPCPSInfo; + UINT8 cpuSubType; + UINT8 SystemRasType; + UINT8 numCpus; // 1,..4. Total number of CPU packages installed and detected (1..4)by QPI RC + UINT16 tolmLimit; + UINT32 tohmLimit; + BL_RC_VERSION RcVersion; + BOOLEAN MsrTraceEnable; + UINT8 DdrXoverMode; // DDR 2.2 Mode + // For RAS + UINT8 bootMode; + UINT8 OutClusterOnDieEn; // Whether RC enabled COD support + UINT8 OutSncEn; + UINT8 OutNumOfCluster; + UINT8 imcEnabled[BL_MAX_SOCKET][BL_MAX_IMC]; + UINT16 LlcSizeReg; + UINT8 chEnabled[BL_MAX_SOCKET][BL_MAX_CH]; + UINT8 memNode[BL_MC_MAX_NODE]; + UINT8 IoDcMode; + UINT8 DfxRstCplBitsEn; +} BL_SYSTEM_STATUS; + +typedef struct { + BL_PLATFORM_DATA PlatformData; + BL_SYSTEM_STATUS SystemStatus; +} BL_IIO_UDS; + +//PCI MMIO and IO resource reconfiguration +typedef struct { + UINT16 IoBase; // Base of I/O range assigned to entity + UINT16 IoLimit; // Limit of I/O range assigned to entity + UINT32 LowMmioBase; // Base of low MMIO region for entity + UINT32 LowMmioLimit; // Limit of low MMIO region for entity + UINT64 HighMmioBase; // Base of high (64-bit) MMIO region for entity + UINT64 HighMmioLimit; // Limit of high (64-bit) MMIO region for entity +} BL_PCI_BASE_LIMITS; + +typedef struct { + BL_PCI_BASE_LIMITS StackLimits[BL_MAX_LOGIC_IIO_STACK]; // Base and Limit of all PCIe resources for each stack of the socket +} BL_SOCKET_PCI_BASE_LIMITS; + +typedef struct { + BL_SOCKET_PCI_BASE_LIMITS Socket[BL_MAX_SOCKET]; // Base and limit of all PCIe resources for each socket +} BL_SYSTEM_PCI_BASE_LIMITS; + +typedef enum { + BL_TYPE_UBOX = 0, + BL_TYPE_UBOX_IIO, + BL_TYPE_MCP, + BL_TYPE_FPGA, + BL_TYPE_HFI, + BL_TYPE_NAC, + BL_TYPE_GRAPHICS, + BL_TYPE_DINO, + BL_TYPE_RESERVED, + BL_TYPE_DISABLED, // This item must be prior to stack specific disable types + BL_TYPE_UBOX_IIO_DIS, + BL_TYPE_MCP_DIS, + BL_TYPE_FPGA_DIS, + BL_TYPE_HFI_DIS, + BL_TYPE_NAC_DIS, + BL_TYPE_GRAPHICS_DIS, + BL_TYPE_DINO_DIS, + BL_TYPE_RESERVED_DIS, + BL_TYPE_NONE +} BL_STACK_TYPE; // This enumeration defines the "Personality" of a given stack. + + +/** FSP-M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Enable BIOS SSA RMT + Enables/Disables SSA RMT. Please refer to the Integration guide for RMT details. + $EN_DIS +**/ + UINT8 PcdEnableBiosSsaRMT; + +/** Offset 0x0041 - Enable BIOS SSA RMT on Fast Cold Boot + Enables/Disables SSA RMT on a Fast Cold Boot + $EN_DIS +**/ + UINT8 PcdEnableBiosSsaRMTonFCB; + +/** Offset 0x0042 - Enable RMT per Bit Margining + Enables/Disables Per Bit Margining + $EN_DIS +**/ + UINT8 PcdBiosSsaPerBitMargining; + +/** Offset 0x0043 - Enable SSA Tables Display + Enables/Disables displaying results as tables + $EN_DIS +**/ + UINT8 PcdBiosSsaDisplayTables; + +/** Offset 0x0044 - Enable SSA Plot Display + Enables/Disables the display of per bit results as plots + $EN_DIS +**/ + UINT8 PcdBiosSsaPerDisplayPlots; + +/** Offset 0x0045 - Loop count for rank test + Exponential loop count for a single rank test +**/ + UINT8 PcdBiosSsaLoopCount; + +/** Offset 0x0046 - Enable Backside Margining + Enables/Disables margin test on the register or buffer backside + $EN_DIS +**/ + UINT8 PcdBiosSsaBacksideMargining; + +/** Offset 0x0047 - Enable Early Read ID Margining + Enables/Disables PMem Early Read Id Test + $EN_DIS +**/ + UINT8 PcdBiosSsaEarlyReadIdMargining; + +/** Offset 0x0048 - Enable Step Size Override + Enables/Disables overriding the default step sizes + $EN_DIS +**/ + UINT8 PcdBiosSsaStepSizeOverride; + +/** Offset 0x0049 - Step size RxDqs + Step size of RxDqs. Auto:1. Supported values : 1,2,4,8. This option is valid only + if 'Enable Step size override' is Enabled + 1:1, 2:2, 4:4, 8:8 +**/ + UINT8 PcdBiosSsaRxDqs; + +/** Offset 0x004A - Step size RxVrefs + Step size of RxVrefs. Auto:1. Supported values : 1,2,4,8. This option is valid only + if 'Enable Step size override' is Enabled + 1:1, 2:2, 4:4, 8:8 +**/ + UINT8 PcdBiosSsaRxVref; + +/** Offset 0x004B - Step size TxDqs + Step size of TxDqs. Auto:1. Supported values : 1,2,4,8. This option is valid only + if 'Enable Step size override' is Enabled + 1:1, 2:2, 4:4, 8:8 +**/ + UINT8 PcdBiosSsaTxDq; + +/** Offset 0x004C - Step size TxVrefs + Step size of TxVrefs. Auto:1. Supported values : 1,2,4,8. This option is valid only + if 'Enable Step size override' is Enabled + 1:1, 2:2, 4:4, 8:8 +**/ + UINT8 PcdBiosSsaTxVref; + +/** Offset 0x004D - Step size CmdAll + Step size of CmdAll. Auto:1. Supported values : 1,2,4,8. This option is valid only + if 'Enable Step size override' is Enabled + 1:1, 2:2, 4:4, 8:8 +**/ + UINT8 PcdBiosSsaCmdAll; + +/** Offset 0x004E - Step size CmdVref + Step size of CmdVref. Auto:1. Supported values : 1,2,4,8. This option is valid only + if 'Enable Step size override' is Enabled + 1:1, 2:2, 4:4, 8:8 +**/ + UINT8 PcdBiosSsaCmdVref; + +/** Offset 0x004F - Step size CtlAll + Step size of CtlAll. Auto:1. Supported values : 1,2,4,8. This option is valid only + if 'Enable Step size override' is Enabled + 1:1, 2:2, 4:4, 8:8 +**/ + UINT8 PcdBiosSsaCtlAll; + +/** Offset 0x0050 - Step size EridDelay + Step size of EridDelay. Auto:1. Supported values : 1,2,4,8. This option is valid + only if 'Enable Step size override' is Enabled + 1:1, 2:2, 4:4, 8:8 +**/ + UINT8 PcdBiosSsaEridDelay; + +/** Offset 0x0051 - Step size EridVref + Step size of EridVref. Auto:1. Supported values : 1,2,4,8. This option is valid + only if 'Enable Step size override' is Enabled + 1:1, 2:2, 4:4, 8:8 +**/ + UINT8 PcdBiosSsaEridVref; + +/** Offset 0x0052 - Enable SSA RMT Debug Message + Enables the BSSA RMT debug messages + 2:Disable, 5:Enable +**/ + UINT8 PcdBiosSsaDebugMessages; + +/** Offset 0x0053 +**/ + UINT8 UnusedUpdSpace0[13]; + +/** Offset 0x0060 - ECC Support + Enable/disable ECC Support. + $EN_DIS +**/ + UINT8 PcdEccSupport; + +/** Offset 0x0061 - Fast Boot + Enable/Disable Fast Boot. + 0:Disabled,1:Enabled +**/ + UINT8 PcdFastBoot; + +/** Offset 0x0062 - Memory Test + Enable/Disable Memory Test. + $EN_DIS +**/ + UINT8 PcdMemTest; + +/** Offset 0x0063 - Memory Turnaround Time Optimization + Enable/Disable Memory turnaround time optimization. + $EN_DIS +**/ + UINT8 PcdMemTurnaroundOpt; + +/** Offset 0x0064 - Memory Frequency + Set DDR Memory Frequency Limit + 0: AUTO, 4:1200, 5:1333, 6:1400, 7:1600, 8:1800, 9:1866, 11:2133, 12:2200, 13:2400, + 14:2600, 15:2666, 16:2800, 17: 2933 +**/ + UINT8 PcdDdrFreq; + +/** Offset 0x0065 - Memory Command Timing + Select the desired memory controller command timing + 0:Auto, 1:1N, 2:2N, 3:3N +**/ + UINT8 PcdCommandTiming; + +/** Offset 0x0066 - Memory Custom Refresh Rate + Set Desired rate in 0.1x units of the standard 7.8 usec interval. The valid range + is 20 - 80(i.e. 2x to 8x) +**/ + UINT8 PcdCustomRefreshRate; + +/** Offset 0x0067 - TSEG size + Configure TSEG size in MB. + 1:8M, 2:16M, 3:32M, 4:64M, 5:128M +**/ + UINT8 PcdTsegSize; + +/** Offset 0x0068 +**/ + UINT8 UnusedUpdSpace1[40]; + +/** Offset 0x0090 - HSUART Device + Select the PCI High Speed UART Device for Serial Port. + 0:HSUART0, 1:HSUART1, 2:HSUART2 +**/ + UINT8 PcdHsuartDevice; + +/** Offset 0x0091 - ME Heci Communication + Enable/Disable ME Heci Communication. + 0:Disabled,1:Enabled +**/ + UINT8 PcdHeciCommunication; + +/** Offset 0x0092 - Virtualization Technology for Directed I/O + Enable/Disable Virtualization Technology for Directed I/O. + $EN_DIS +**/ + UINT8 PcdVtdSupport; + +/** Offset 0x0093 - Enable USB3 Ports + Enable/Disable per USB3 Ports. One byte for each port, byte0 for port0, byte1 for + port1 and so on. +**/ + UINT32 PcdPchUsb3Port; + +/** Offset 0x0097 - Enable USB2 Ports + Enable/Disable per USB2 Ports. One byte for each port, byte0 for port0, byte1 for + port1 and so on. +**/ + UINT32 PcdPchUsb2Port; + +/** Offset 0x009B - Enable USB3 Port Over Current Configuration + Enable over current pin assignment per USB3 port. 0xFF mean skip over current pin. + One byte for each port, byte0 for port0, byte1 for port1 and so on +**/ + UINT32 PcdPchUsb3PortOc; + +/** Offset 0x009F - Enable USB2 Port Over Current Configuration + Enable over current pin assignment per USB2 port. 0xFF mean skip over current pin. + One byte for each port, byte0 for port0, byte1 for port1 and so on +**/ + UINT32 PcdPchUsb2PortOc; + +/** Offset 0x00A3 - USB2 Per Port HS Pre-emphasis Bias + USB2 Per Port HS Pre-emphasis Bias. 000b - 0mV, 001b - 11.25mV, 010b - 16.9mV, 011b + - 28.15mV, 100b - 28.15mV, 101b - 39.35mV, 110b - 45mV, 111b - 56.3mV. One byte + for each port. +**/ + UINT32 PcdUsb2PeTxiSet; + +/** Offset 0x00A7 - USB2 Per Port HS Transmitter Bias + USB2 Per Port HS Transmitter Bias. 000b - 0mV, 001b - 11.25mV, 010b - 16.9mV, 011b + - 28.15mV, 100b - 28.15mV, 101b - 39.35mV, 110b - 45mV, 111b - 56.3mV. One byte + for each port. +**/ + UINT32 PcdUsb2TxiSet; + +/** Offset 0x00AB - USB2 Per Port HS Transmitter Emphasis + USB2 Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT32 PcdUsb2PreDeEmp; + +/** Offset 0x00AF - USB2 Per Port Half Bit Pre-emphasis + USB2 Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT32 PcdUsb2PreEmpHalfBit; + +/** Offset 0x00B3 - IIO PCIe Port 1 Bifurcation + IIO PCI Express port bifurcation for selected slot(s). + 0xFF:Auto, 0:X4X4X4X4, 1:X4X4X8, 2:X8X4X4, 3:X8X8, 4:X16 +**/ + UINT8 PcdIIOPciePortBifurcation; + +/** Offset 0x00B4 - IIO PCIe R-Link DeEmphasis + Desired DeEmphasis level for IIO PCIe R-Link + 0:6dB, 1:3.5dB +**/ + UINT8 PcdIIoPcieRLinkDeEmphasis; + +/** Offset 0x00B5 - IIO PCIe Port 1A DeEmphasis + Desired DeEmphasis level for IIO PCIe Port 1A + 0:6dB, 1:3.5dB +**/ + UINT8 PcdIIoPciePort1ADeEmphasis; + +/** Offset 0x00B6 - IIO PCIe Port 1B DeEmphasis + Desired DeEmphasis level for IIO PCIe Port 1B + 0:6dB, 1:3.5dB +**/ + UINT8 PcdIIoPciePort1BDeEmphasis; + +/** Offset 0x00B7 - IIO PCIe Port 1C DeEmphasis + Desired DeEmphasis level for IIO PCIe Port 1C + 0:6dB, 1:3.5dB +**/ + UINT8 PcdIIoPciePort1CDeEmphasis; + +/** Offset 0x00B8 - IIO PCIe Port 1D DeEmphasis + Desired DeEmphasis level for IIO PCIe Port 1D + 0:6dB, 1:3.5dB +**/ + UINT8 PcdIIoPciePort1DDeEmphasis; + +/** Offset 0x00B9 - IIO PCIe R-Link Link Speed + Desired Link Speed for IIO PCIe R-Link + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdIIoPcieLinkSpeedRLink; + +/** Offset 0x00BA - IIO PCIe Port 1A Link Speed + Desired Link Speed for IIO PCIe Port 1A + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdIIoPciePort1ALinkSpeed; + +/** Offset 0x00BB - IIO PCIe Port 1B Link Speed + Desired Link Speed for IIO PCIe Port 1B + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdIIoPciePort1BLinkSpeed; + +/** Offset 0x00BC - IIO PCIe Port 1C Link Speed + Desired Link Speed for IIO PCIe Port 1C + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdIIoPciePort1CLinkSpeed; + +/** Offset 0x00BD - IIO PCIe Port 1D Link Speed + Desired Link Speed for IIO PCIe Port 1D + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdIIoPciePort1DLinkSpeed; + +/** Offset 0x00BE - IIO PCIe R-Link Aspm + Desired Active state power management settings for IIO PCIe R-Link + 0:Disabled,2:L1 +**/ + UINT8 PcdIIoPcieRLinkAspm; + +/** Offset 0x00BF - IIO PCIe Port 1A Aspm + Desired Active state power management settings for IIO PCIe Port 1A + 0:Disabled,2:L1 +**/ + UINT8 PcdIIoPciePort1AAspm; + +/** Offset 0x00C0 - IIO PCIe Port 1B Aspm + Desired Active state power management settings for IIO PCIe Port 1B + 0:Disabled,2:L1 +**/ + UINT8 PcdIIoPciePort1BAspm; + +/** Offset 0x00C1 - IIO PCIe Port 1C Aspm + Desired Active state power management settings for IIO PCIe Port 1C + 0:Disabled,2:L1 +**/ + UINT8 PcdIIoPciePort1CAspm; + +/** Offset 0x00C2 - IIO PCIe Port 1D Aspm + Desired Active state power management settings for IIO PCIe Port 1D + 0:Disabled,2:L1 +**/ + UINT8 PcdIIoPciePort1DAspm; + +/** Offset 0x00C3 - PCH PCIe Controller 0 Bifurcation + Configure PCI Express controller 0 bifurcation. + 0: Auto, 5:4x2, 6:1x4 2x2, 7:2x2 1x4, 8:2x4, 9:1x8 +**/ + UINT8 PcdBifurcationPcie0; + +/** Offset 0x00C4 - PCH PCIe Controller 2 Bifurcation + Configure PCI Express controller 2 bifurcation. + 0: Auto, 5:4x2, 6:1x4 2x2, 7:2x2 1x4, 8:2x4, 9:1x8 +**/ + UINT8 PcdBifurcationPcie2; + +/** Offset 0x00C5 +**/ + UINT8 UnusedUpdSpace2[107]; + +/** Offset 0x0130 - Customer Revision + The Customer can set this revision string for their own purpose. +**/ + UINT8 PcdCustomerRevision[32]; + +/** Offset 0x0150 - Memory Thermal Throttling + Enable/disable Memory Thermal Throttling + 0:Disabled,2:Enabled +**/ + UINT8 PcdMemoryThermalThrottling; + +/** Offset 0x0151 +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x0152 +**/ + UINT8 PcdFiaMuxOverride; + +/** Offset 0x0153 +**/ + UINT8 FiaMuxCfgInvalidate; + +/** Offset 0x0154 +**/ + UINT8 UnusedUpdSpace4[3]; + +/** Offset 0x0157 - PCH Trace Hub Enable Mode + Select Host or Target for Trace Hub debugger tool. Refer to Integration guide. + 0:Disable, 1:Target debugger, 2:Host debugger +**/ + UINT8 PcdPchTraceHubMode; + +/** Offset 0x0158 - PCH TH Mem Buffer Size 0 + Select size of memory region 0 buffer. Refer to Integration guide. + 0:None/OS, 1:1 MB, 2:8 MB, 3:64 MB, 4:128 MB, 5:256 MB, 6:512 MB +**/ + UINT8 PcdPchTraceHubMemReg0Size; + +/** Offset 0x0159 - PCH TH Mem Buffer Size 1 + Select size of memory region 1 buffer. Refer to Integration guide + 0:None/OS, 1:1 MB, 2:8 MB, 3:64 MB, 4:128 MB, 5:256 MB, 6:512 MB +**/ + UINT8 PcdPchTraceHubMemReg1Size; + +/** Offset 0x015A +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x015B - IMR3 Enable + Enable/Disable IMR3 .Default is Disabled .Refer to Integration guide + $EN_DIS +**/ + UINT8 PcdEnableIMR3; + +/** Offset 0x015C - Processor X2APIC Enable + Enable / Disable Processor X2APIC. Refer to Integration guide + $EN_DIS +**/ + UINT8 PcdProcessorX2Apic; + +/** Offset 0x015D - Hyper Threading Enable/Disable + Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PcdHyperThreading; + +/** Offset 0x015E - PCIe Hot Plug Enable + Enable / Disable PCIe Hot Plug. + $EN_DIS +**/ + UINT8 PcdPcieHotPlugEnable; + +/** Offset 0x015F - PCIe Acpi Hot Plug Enable + Enable / Disable PCIe Acpi Hot Plug. + $EN_DIS +**/ + UINT8 PcdPcieAcpiHotPlugEnable; + +/** Offset 0x0160 +**/ + UINT8 UnusedUpdSpace6; + +/** Offset 0x0161 - IIO PCIe Port 1A Hot Plug Capable + Hot Plug Capable for IIO PCIe Port 1A + 0:Disable, 1:Enable +**/ + UINT8 PcdIIoPciePort1AHPCapable; + +/** Offset 0x0162 - IIO PCIe Port 1B Hot Plug Capable + Hot Plug Capable for IIO PCIe Port 1B + 0:Disable, 1:Enable +**/ + UINT8 PcdIIoPciePort1BHPCapable; + +/** Offset 0x0163 - IIO PCIe Port 1C Hot Plug Capable + Hot Plug Capable for IIO PCIe Port 1C + 0:Disable, 1:Enable +**/ + UINT8 PcdIIoPciePort1CHPCapable; + +/** Offset 0x0164 - IIO PCIe Port 1D Hot Plug Capable + Hot Plug Capable for IIO PCIe Port 1D + 0:Disable, 1:Enable +**/ + UINT8 PcdIIoPciePort1DHPCapable; + +/** Offset 0x0165 +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x0166 - IIO PCIe Port 1A Hot Plug Surprise + Enable / Disable Hot Plug Capable Surprise for IIO PCIe Port 1A + $EN_DIS +**/ + UINT8 PcdIIoPciePort1AHPSurprise; + +/** Offset 0x0167 - IIO PCIe Port 1B Hot Plug Surprise + Enable / Disable Hot Plug Capable Surprise for IIO PCIe Port 1B + $EN_DIS +**/ + UINT8 PcdIIoPciePort1BHPSurprise; + +/** Offset 0x0168 - IIO PCIe Port 1C Hot Plug Surprise + Enable / Disable Hot Plug Capable Surprise for IIO PCIe Port 1C + $EN_DIS +**/ + UINT8 PcdIIoPciePort1CHPSurprise; + +/** Offset 0x0169 - IIO PCIe Port 1D Hot Plug Surprise + Enable / Disable Hot Plug Capable Surprise for IIO PCIe Port 1D + $EN_DIS +**/ + UINT8 PcdIIoPciePort1DHPSurprise; + +/** Offset 0x016A +**/ + UINT8 UnusedUpdSpace8[102]; + +/** Offset 0x01D0 +**/ + UINT32 PcdIioResConfigPtr; + +/** Offset 0x01D4 +**/ + UINT32 PcdFiaLaneConfigPtr; + +/** Offset 0x01D8 +**/ + UINT32 PcdKtiBufferPtr; + +/** Offset 0x01DC +**/ + UINT32 PcdMemSpdPtr; + +/** Offset 0x01E0 +**/ + UINT8 ReservedMemoryInitUpd[16]; +} FSP_M_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x01F0 +**/ + UINT8 UnusedUpdSpace9[14]; + +/** Offset 0x01FE +**/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/snowridge/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/snowridge/FspsUpd.h new file mode 100644 index 0000000000..509a4df293 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/snowridge/FspsUpd.h @@ -0,0 +1,337 @@ +/** @file + +Copyright (c) 2024, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** FSP-S Configuration +**/ +typedef struct { + +/** Offset 0x0020 +**/ + UINT32 PcdCpuMicrocodePatchBase; + +/** Offset 0x0024 +**/ + UINT32 PcdCpuMicrocodePatchSize; + +/** Offset 0x0028 - SATA Controllers + Enable/disable SATA Controller. Byte 0,2 is for SATA controller 0,2 respectively. + Byte1 and 4 are unused +**/ + UINT32 PcdEnableSATA; + +/** Offset 0x002C - SATA port Enable for Controller 0 + 0:Disabled , 1: Enabled . Each one of 8 ports are represented by a nibble . for + example : nibble 0 controls port 0 , nibble 1 controls port 1 +**/ + UINT32 PcdSATA0PortEnable; + +/** Offset 0x0030 - SATA port HotPlug capability for Controller 0 + 0:Disabled , 1: Enabled . Each one of 8 ports are represented by a nibble . for + example : nibble 0 controls port 0 , nibble 1 controls port 1 +**/ + UINT32 PcdSATA0PortHotplug; + +/** Offset 0x0034 - SATA port Enable for Controller 2 + 0:Disabled , 1: Enabled . Each one of 8 ports are represented by a nibble . for + example : nibble 0 controls port 0 , nibble 1 controls port 1 +**/ + UINT32 PcdSATA2PortEnable; + +/** Offset 0x0038 - SATA port HotPlug capability for Controller 2 + 0:Disabled , 1: Enabled . Each one of 8 ports are represented by a nibble . for + example : nibble 0 controls port 0 , nibble 1 controls port 1 +**/ + UINT32 PcdSATA2PortHotplug; + +/** Offset 0x003C - EMMC controller + Enable/Disable EMMC controller. + $EN_DIS +**/ + UINT8 PcdEmmc; + +/** Offset 0x003D - EMMC HS400 Support + Enable/Disable EMMC HS400 Support. + $EN_DIS +**/ + UINT8 PcdEmmcHS400Support; + +/** Offset 0x003E - PCH PCIe Root Port 0 Link Speed + Desired Link Speed level for PCIe Root Port 0 + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdPcieRootPort0LinkSpeed; + +/** Offset 0x003F - PCH PCIe Root Port 1 Link Speed + Desired Link Speed level for PCIe Root Port 1 + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdPcieRootPort1LinkSpeed; + +/** Offset 0x0040 - PCH PCIe Root Port 2 Link Speed + Desired Link Speed level for PCIe Root Port 0 + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdPcieRootPort2LinkSpeed; + +/** Offset 0x0041 - PCH PCIe Root Port 3 Link Speed + Desired Link Speed level for PCIe Root Port 3 + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdPcieRootPort3LinkSpeed; + +/** Offset 0x0042 - PCH PCIe Root Port 8 Link Speed + Desired Link Speed level for PCIe Root Port 8 + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdPcieRootPort8LinkSpeed; + +/** Offset 0x0043 - PCH PCIe Root Port 9 Link Speed + Desired Link Speed level for PCIe Root Port 9 + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdPcieRootPort9LinkSpeed; + +/** Offset 0x0044 - PCH PCIe Root Port 10 Link Speed + Desired Link Speed level for PCIe Root Port 10 + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdPcieRootPort10LinkSpeed; + +/** Offset 0x0045 - PCH PCIe Root Port 11 Link Speed + Desired Link Speed level for PCIe Root Port 11 + 1:GEN1, 2:GEN2, 3:GEN3 +**/ + UINT8 PcdPcieRootPort11LinkSpeed; + +/** Offset 0x0046 - PCH PCIe Root Port 0 Aspm + Desired Active state power management settings for PCIe Root Port 0 + 0:Disabled, 1:L0, 2:L1, 3:L0SL1 +**/ + UINT8 PcdPcieRootPort0Aspm; + +/** Offset 0x0047 - PCH PCIe Root Port 1 Aspm + Desired Active state power management settings for PCIe Root Port 1 + 0:Disabled, 1:L0, 2:L1, 3:L0SL1 +**/ + UINT8 PcdPcieRootPort1Aspm; + +/** Offset 0x0048 - PCH PCIe Root Port 2 Aspm + Desired Active state power management settings for PCIe Root Port 2 + 0:Disabled, 1:L0, 2:L1, 3:L0SL1 +**/ + UINT8 PcdPcieRootPort2Aspm; + +/** Offset 0x0049 - PCH PCIe Root Port 3 Aspm + Desired Active state power management settings for PCIe Root Port 3 + 0:Disabled, 1:L0, 2:L1, 3:L0SL1 +**/ + UINT8 PcdPcieRootPort3Aspm; + +/** Offset 0x004A - PCH PCIe Root Port 8 Aspm + Desired Active state power management settings for PCIe Root Port 8 + 0:Disabled, 1:L0, 2:L1, 3:L0SL1 +**/ + UINT8 PcdPcieRootPort8Aspm; + +/** Offset 0x004B - PCH PCIe Root Port 9 Aspm + Desired Active state power management settings for PCIe Root Port 9 + 0:Disabled, 1:L0, 2:L1, 3:L0SL1 +**/ + UINT8 PcdPcieRootPort9Aspm; + +/** Offset 0x004C - PCH PCIe Root Port 10 Aspm + Desired Active state power management settings for PCIe Root Port 10 + 0:Disabled, 1:L0, 2:L1, 3:L0SL1 +**/ + UINT8 PcdPcieRootPort10Aspm; + +/** Offset 0x004D - PCH PCIe Root Port 11 Aspm + Desired Active state power management settings for PCIe Root Port 11 + 0:Disabled, 1:L0, 2:L1, 3:L0SL1 +**/ + UINT8 PcdPcieRootPort11Aspm; + +/** Offset 0x004E - PCH PCIe Root Port 0 Connection Type + Set Connection Type for PCIe Root Port 0. PCIe Root Port 0 Hotplug enable forces + connection type to Slot. + 0:Built-In, 1:Slot +**/ + UINT8 PcdPcieRootPort0ConnectionType; + +/** Offset 0x004F - PCH PCIe Root Port 1 Connection Type + Set Connection Type for PCIe Root Port 1. PCIe Root Port 1 Hotplug enable forces + connection type to Slot. + 0:Built-In, 1:Slot +**/ + UINT8 PcdPcieRootPort1ConnectionType; + +/** Offset 0x0050 - PCH PCIe Root Port 2 Connection Type + Set Connection Type for PCIe Root Port 2. PCIe Root Port 2 Hotplug enable forces + connection type to Slot. + 0:Built-In, 1:Slot +**/ + UINT8 PcdPcieRootPort2ConnectionType; + +/** Offset 0x0051 - PCH PCIe Root Port 3 Connection Type + Set Connection Type for PCIe Root Port 3. PCIe Root Port 3 Hotplug enable forces + connection type to Slot. + 0:Built-In, 1:Slot +**/ + UINT8 PcdPcieRootPort3ConnectionType; + +/** Offset 0x0052 - PCH PCIe Root Port 8 Connection Type + Set Connection Type for PCIe Root Port 8. PCIe Root Port 8 Hotplug enable forces + connection type to Slot. + 0:Built-In, 1:Slot +**/ + UINT8 PcdPcieRootPort8ConnectionType; + +/** Offset 0x0053 - PCH PCIe Root Port 9 Connection Type + Set Connection Type for PCIe Root Port 9. PCIe Root Port 9 Hotplug enable forces + connection type to Slot. + 0:Built-In, 1:Slot +**/ + UINT8 PcdPcieRootPort9ConnectionType; + +/** Offset 0x0054 - PCH PCIe Root Port 10 Connection Type + Set Connection Type for PCIe Root Port 10. PCIe Root Port 10 Hotplug enable forces + connection type to Slot. + 0:Built-In, 1:Slot +**/ + UINT8 PcdPcieRootPort10ConnectionType; + +/** Offset 0x0055 - PCH PCIe Root Port 11 Connection Type + Set Connection Type for PCIe Root Port 11. PCIe Root Port 11 Hotplug enable forces + connection type to Slot. + 0:Built-In, 1:Slot +**/ + UINT8 PcdPcieRootPort11ConnectionType; + +/** Offset 0x0056 - PCH PCIe Root Port 0 HotPlug + Enable/Disable HotPlug for PCIe Root Port 0 + $EN_DIS +**/ + UINT8 PcdPcieRootPort0HotPlug; + +/** Offset 0x0057 - PCH PCIe Root Port 1 HotPlug + Enable/Disable HotPlug for PCIe Root Port 1 + $EN_DIS +**/ + UINT8 PcdPcieRootPort1HotPlug; + +/** Offset 0x0058 - PCH PCIe Root Port 2 HotPlug + Enable/Disable HotPlug for PCIe Root Port 2 + $EN_DIS +**/ + UINT8 PcdPcieRootPort2HotPlug; + +/** Offset 0x0059 - PCH PCIe Root Port 3 HotPlug + Enable/Disable HotPlug for PCIe Root Port 3 + $EN_DIS +**/ + UINT8 PcdPcieRootPort3HotPlug; + +/** Offset 0x005A - PCH PCIe Root Port 8 HotPlug + Enable/Disable HotPlug for PCIe Root Port 8 + $EN_DIS +**/ + UINT8 PcdPcieRootPort8HotPlug; + +/** Offset 0x005B - PCH PCIe Root Port 9 HotPlug + Enable/Disable HotPlug for PCIe Root Port 9 + $EN_DIS +**/ + UINT8 PcdPcieRootPort9HotPlug; + +/** Offset 0x005C - PCH PCIe Root Port 10 HotPlug + Enable/Disable HotPlug for PCIe Root Port 10 + $EN_DIS +**/ + UINT8 PcdPcieRootPort10HotPlug; + +/** Offset 0x005D - PCH PCIe Root Port 11 HotPlug + Enable/Disable HotPlug for PCIe Root Port 11 + $EN_DIS +**/ + UINT8 PcdPcieRootPort11HotPlug; + +/** Offset 0x005E - IO-APIC 24-119 RTE + Enable/Disable IO APIC entries 24-119 + $EN_DIS +**/ + UINT8 PcdPchIoApic24119Entries; + +/** Offset 0x005F +**/ + UINT8 UnusedUpdSpace0[125]; + +/** Offset 0x00DC +**/ + UINT32 PcdEMMCDLLConfigPtr; + +/** Offset 0x00E0 +**/ + UINT8 ReservedSiliconInitUpd[16]; +} FSP_S_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSP_S_CONFIG FspsConfig; + +/** Offset 0x00F0 +**/ + UINT8 UnusedUpdSpace1[14]; + +/** Offset 0x00FE +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/snowridge/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/snowridge/FsptUpd.h new file mode 100644 index 0000000000..047667a741 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/snowridge/FsptUpd.h @@ -0,0 +1,93 @@ +/** @file + +Copyright (c) 2024, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPTUPD_H__ +#define __FSPTUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** FSP-T Core UPD +**/ +typedef struct { + +/** Offset 0x0020 +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x0024 +**/ + UINT32 MicrocodeRegionLength; + +/** Offset 0x0028 +**/ + UINT32 CodeRegionBase; + +/** Offset 0x002C +**/ + UINT32 CodeRegionLength; + +/** Offset 0x0030 +**/ + UINT8 Reserved1[16]; +} FSPT_CORE_UPD; + +/** Fsp T UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPT_CORE_UPD FsptCoreUpd; + +/** Offset 0x0040 +**/ + UINT8 ReservedTempRamInitUpd[32]; + +/** Offset 0x0060 +**/ + UINT8 UnusedUpdSpace0[30]; + +/** Offset 0x007E +**/ + UINT16 UpdTerminator; +} FSPT_UPD; + +#pragma pack() + +#endif |