diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/intel/meteorlake/chip.h | 71 |
1 files changed, 37 insertions, 34 deletions
diff --git a/src/soc/intel/meteorlake/chip.h b/src/soc/intel/meteorlake/chip.h index b75cbbaa65..e76f169ca9 100644 --- a/src/soc/intel/meteorlake/chip.h +++ b/src/soc/intel/meteorlake/chip.h @@ -16,6 +16,7 @@ #include <soc/pmc.h> #include <soc/serialio.h> #include <soc/usb.h> +#include <stdbool.h> #include <stdint.h> /* Define config parameters for In-Band ECC (IBECC). */ @@ -165,17 +166,17 @@ struct soc_intel_meteorlake_config { uint32_t gen4_dec; /* Enable S0iX support */ - int s0ix_enable; + bool s0ix_enable; /* Support for TCSS xhci, xdci, TBT PCIe root ports and DMA controllers */ - uint8_t tcss_d3_hot_disable; + bool tcss_d3_hot_disable; /* Enable DPTF support */ - int dptf_enable; + bool dptf_enable; /* Deep SX enable for both AC and DC */ - int deep_s3_enable_ac; - int deep_s3_enable_dc; - int deep_s5_enable_ac; - int deep_s5_enable_dc; + bool deep_s3_enable_ac; + bool deep_s3_enable_dc; + bool deep_s5_enable_ac; + bool deep_s5_enable_dc; /* Deep Sx Configuration * DSX_EN_WAKE_PIN - Enable WAKE# pin @@ -208,8 +209,8 @@ struct soc_intel_meteorlake_config { SAGV_POINTS_0_1_2_3 = 0x0f, } sagv_wp_bitmap; - /* Rank Margin Tool. 1:Enable, 0:Disable */ - uint8_t rmt; + /* Rank Margin Tool. true:Enable, false:Disable */ + bool rmt; /* USB related */ struct usb2_port_config usb2_ports[CONFIG_SOC_INTEL_USB2_DEV_MAX]; @@ -225,21 +226,21 @@ struct soc_intel_meteorlake_config { /* SATA related */ uint8_t sata_mode; - uint8_t sata_salp_support; - uint8_t sata_ports_enable[8]; - uint8_t sata_ports_dev_slp[8]; + bool sata_salp_support; + bool sata_ports_enable[8]; + bool sata_ports_dev_slp[8]; /* - * Enable(0)/Disable(1) SATA Power Optimizer on PCH side. - * Default 0. Setting this to 1 disables the SATA Power Optimizer. + * Enable(false)/Disable(true) SATA Power Optimizer on PCH side. + * Default false. Setting this to true disables the SATA Power Optimizer. */ - uint8_t sata_pwr_optimize_disable; + bool sata_pwr_optimize_disable; /* * SATA Port Enable Dito Config. * Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). */ - uint8_t sata_ports_enable_dito_config[8]; + bool sata_ports_enable_dito_config[8]; /* SataPortsDmVal is the DITO multiplier. Default is 15. */ uint8_t sata_ports_dm_val[8]; @@ -247,8 +248,8 @@ struct soc_intel_meteorlake_config { uint16_t sata_ports_dito_val[8]; /* Audio related */ - uint8_t pch_hda_audio_link_hda_enable; - uint8_t pch_hda_dsp_enable; + bool pch_hda_audio_link_hda_enable; + bool pch_hda_dsp_enable; bool pch_hda_sdi_enable[MAX_HD_AUDIO_SDI_LINKS]; @@ -294,10 +295,11 @@ struct soc_intel_meteorlake_config { IGD_SM_56MB = 0xFD, IGD_SM_60MB = 0xFE, } igd_dvmt50_pre_alloc; - uint8_t skip_ext_gfx_scan; - /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ - uint8_t eist_enable; + bool skip_ext_gfx_scan; + + /* Enable/Disable EIST. true:Enabled, false:Disabled */ + bool eist_enable; /* * When enabled, this feature makes the SoC throttle when the power @@ -445,16 +447,16 @@ struct soc_intel_meteorlake_config { uint8_t cpu_ratio_override; /* - * Enable(0)/Disable(1) DMI Power Optimizer on PCH side. - * Default 0. Setting this to 1 disables the DMI Power Optimizer. + * Enable(true)/Disable(false) DMI Power Optimizer on PCH side. + * Default false. Setting this to true disables the DMI Power Optimizer. */ - uint8_t dmi_pwr_optimize_disable; + bool dmi_pwr_optimize_disable; /* - * Enable(1)/Disable(0) CPU Replacement check. - * Default 0. Setting this to 1 to check CPU replacement. + * Enable(true)/Disable(false) CPU Replacement check. + * Default false. Setting this to true to check CPU replacement. */ - uint8_t cpu_replacement_check; + bool cpu_replacement_check; /* ISA Serial Base selection. */ enum { @@ -472,7 +474,8 @@ struct soc_intel_meteorlake_config { * Enable or Disable C1 C-state Auto Demotion & un-demotion * The algorithm looks at the behavior of the wake up tracker, how * often it is waking up, and based on that it demote the c-state. - * Default 0. Set this to 1 in order to disable C1-state auto demotion. + * Default false. Set this to true in order to disable C1-state auto + * demotion. * NOTE: Un-Demotion from Demoted C1 needs to be disabled when * C1 C-state Auto Demotion is disabled. */ @@ -480,8 +483,8 @@ struct soc_intel_meteorlake_config { /* * Enable or Disable Package C-state Demotion. - * Default is set to 0. - * Set this to 1 in order to disable Package C-state demotion. + * Default is set to false. + * Set this to true in order to disable Package C-state demotion. * NOTE: Un-Demotion from demoted Package C-state needs to be disabled * when auto demotion is disabled. */ @@ -507,8 +510,8 @@ struct soc_intel_meteorlake_config { /* * Enable or Disable Reduced BasicMemoryTest size. - * Default is set to 0. - * Set this to 1 in order to reduce BasicMemoryTest size + * Default is set to false. + * Set this to true in order to reduce BasicMemoryTest size */ bool lower_basic_mem_test_size; @@ -519,9 +522,9 @@ struct soc_intel_meteorlake_config { uint16_t psys_pl2_watts; /* Enable or Disable Acoustic Noise Mitigation feature */ - uint8_t enable_acoustic_noise_mitigation; + bool enable_acoustic_noise_mitigation; /* Disable Fast Slew Rate for Deep Package C States for VR domains */ - uint8_t disable_fast_pkgc_ramp[NUM_VR_DOMAINS]; + bool disable_fast_pkgc_ramp[NUM_VR_DOMAINS]; /* * Slew Rate configuration for Deep Package C States for VR domains * as per `enum slew_rate` data type. |