diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/intel/baytrail/baytrail/gpio.h | 21 | ||||
| -rw-r--r-- | src/soc/intel/baytrail/gpio.c | 2 | ||||
| -rw-r--r-- | src/soc/intel/baytrail/romstage/uart.c | 7 |
3 files changed, 25 insertions, 5 deletions
diff --git a/src/soc/intel/baytrail/baytrail/gpio.h b/src/soc/intel/baytrail/baytrail/gpio.h index aae41a4bce..bdd36c104c 100644 --- a/src/soc/intel/baytrail/baytrail/gpio.h +++ b/src/soc/intel/baytrail/baytrail/gpio.h @@ -134,6 +134,10 @@ #define PAD_VAL_OUTPUT_DISABLE (1 << 1) #define PAD_VAL_OUTPUT_ENABLE (0 << 1) +/* pad_val[0] - Value */ +#define PAD_VAL_HIGH (1 << 0) +#define PAD_VAL_LOW (0 << 0) + /* pad_val reg power-on default varies by pad, and apparently can cause issues * if not set correctly, even if the pin isn't configured as GPIO. */ #define PAD_VAL_DEFAULT (PAD_VAL_INPUT_ENABLE | PAD_VAL_OUTPUT_DISABLE) @@ -247,6 +251,8 @@ struct soc_gpio_config* mainboard_get_gpios(void); /* Functions / defines for changing GPIOs in romstage */ /* SCORE Pad definitions. */ +#define UART_RXD_PAD 82 +#define UART_TXD_PAD 83 #define PCU_SMB_CLK_PAD 88 #define PCU_SMB_DATA_PAD 90 @@ -282,4 +288,19 @@ static inline void ssus_select_func(int pad, int func) write32(pconf0_addr, reg); } +/* These functions require that the input pad be configured as an input GPIO */ +static inline int score_get_gpio(int pad) +{ + uint32_t val_addr = score_pconf0(pad) + PAD_VAL_REG; + + return read32(val_addr) & PAD_VAL_HIGH; +} + +static inline int ssus_get_gpio(int pad) +{ + uint32_t val_addr = ssus_pconf0(pad) + PAD_VAL_REG; + + return read32(val_addr) & PAD_VAL_HIGH; +} + #endif /* _BAYTRAIL_GPIO_H_ */ diff --git a/src/soc/intel/baytrail/gpio.c b/src/soc/intel/baytrail/gpio.c index 8118aeb755..9ae79c9d4d 100644 --- a/src/soc/intel/baytrail/gpio.c +++ b/src/soc/intel/baytrail/gpio.c @@ -44,7 +44,7 @@ static const u8 gpssus_gpio_to_pad[GPSSUS_COUNT] = { 29, 33, 30, 31, 32, 34, 36, 35, 38, 37, 18, 7, 11, 20, 17, 1, 8, 10, 19, 12, 0, 2, 23, 39, 28, 27, 22, 21, 24, 25, - 26, 51, 56, 54, 49, 55, 48, 47, 50, 58, + 26, 51, 56, 54, 49, 55, 48, 57, 50, 58, 52, 53, 59, 40 }; /* GPIO bank descriptions */ diff --git a/src/soc/intel/baytrail/romstage/uart.c b/src/soc/intel/baytrail/romstage/uart.c index dee3be95c3..e46237ac1d 100644 --- a/src/soc/intel/baytrail/romstage/uart.c +++ b/src/soc/intel/baytrail/romstage/uart.c @@ -32,8 +32,7 @@ void byt_config_com1_and_enable(void) reg = 1; pci_write_config32(PCI_DEV(0, LPC_DEV, 0), UART_CONT, reg); - /* Set up the pads to select the UART function. RXD and TXD are - * 0x520 and 0x530, respectively. */ - write32(IO_BASE_ADDRESS + 0x520, read32(IO_BASE_ADDRESS + 0x520) | 1); - write32(IO_BASE_ADDRESS + 0x530, read32(IO_BASE_ADDRESS + 0x530) | 1); + /* Set up the pads to select the UART function */ + score_select_func(UART_RXD_PAD, 1); + score_select_func(UART_TXD_PAD, 1); } |