diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/northbridge/intel/sch/raminit.h | 148 |
1 files changed, 74 insertions, 74 deletions
diff --git a/src/northbridge/intel/sch/raminit.h b/src/northbridge/intel/sch/raminit.h index 179b87da0e..f139490236 100644 --- a/src/northbridge/intel/sch/raminit.h +++ b/src/northbridge/intel/sch/raminit.h @@ -25,51 +25,51 @@ **/ #define BIT(x) (1<<x) -#define EBP_TRP_MASK (BIT(1) | BIT(0)) -#define TRP_LOW 3h -#define TRP_HIGH 5h -#define EBP_TRP_OFFSET 0 /* Start of TRP field in EBP*/ -#define EBP_TRCD_MASK (BIT(3) | BIT(2)) -#define TRCD_LOW 3h -#define TRCD_HIGH 5h -#define EBP_TRCD_OFFSET 2 /* Start of TRCD field in EBP*/ -#define EBP_TCL_MASK (BIT(5) | BIT(4)) -#define TCL_LOW 3 /* Minimum supported CL*/ -#define TCL_HIGH 5 /* Maximum supported CL*/ -#define EBP_TCL_OFFSET 4 /* EBP bit( )for CL mask*/ -#define EBP_DDR2_CL_5_0 BIT(5) /* CL 5.0 = 10b*/ -#define EBP_DDR2_CL_4_0 BIT(4) /* CL 4.0 = 01b*/ -#define EBP_DDR2_CL_3_0 00h /* CL 3.0 = 00b*/ -#define EBP_FREQ_MASK (BIT(10)| BIT(9)) -#define EBP_FREQ_OFFSET 9 /* EBP bit( )for frequency mask*/ -#define EBP_FREQ_400 0 /* 400MHz EBP[10:9] = 00b*/ -#define EBP_FREQ_533 BIT(9) /* 533MHz EBP[10:9] = 01b*/ -#define EBP_REFRESH_MASK (BIT(12)| BIT(11)) -#define EBP_REFRESH_OFFSET 11 /* Bit offset of refresh field*/ -#define EBP_REF_DIS 00h /* Mask for refresh disabled*/ -#define EBP_REF_128CLK BIT(11) /* Mask for 128 clks referesh rate*/ -#define EBP_REF_3_9 BIT(12) /* Mask for 3.9us refresh rate*/ -#define EBP_REF_7_8 (BIT(12)| BIT(11))/* Mask for 7.8us refresh rate*/ -#define EBP_WIDTH_MASK BIT(15) -#define EBP_WIDTH_OFFSET 15 /* Bit offset of EBP width field*/ -#define EBP_SOCKET_X16 BIT(15) /* Bit mask of x8/x16 bit*/ -#define EBP_DENSITY_MASK (BIT(17)| BIT(16)) -#define EBP_DENSITY_OFFSET 16 -#define EBP_DENSITY_512 BIT(16) /* 512Mbit density*/ -#define EBP_DENSITY_1024 BIT(17) /* 1024Mbit density*/ -#define EBP_DENSITY_2048 (BIT(17)| BIT(16))/* 2048Mbit density*/ -#define EBP_RANKS_MASK BIT(18) -#define EBP_RANKS_OFFSET 18 -#define EBP_RANKS BIT(18) /* Bit offset of # of ranks bit*/ -#define EBP_PACKAGE_TYPE BIT(19) /* Package type (stacked or not)*/ -#define EBP_2X_MASK BIT(20) -#define EBP_2X_OFFSET 20 /* Bit offset of ebp 2x refresh field*/ -#define EBP_2X_AUTO_REFRESH BIT(20) /* Bit mask of 2x refresh field*/ -#define EBP_DRAM_PARM_MASK BIT(21) -#define EBP_DRAM_PARM_OFFSET 21 -#define EBP_DRAM_PARM_SPD 0 /* Use SPD to get DRAM parameters*/ -#define EBP_DRAM_PARM_CMC BIT(21) /* DRAM parameters in CMC binary*/ -#define EBP_BOOT_PATH BIT(31) +#define EBP_TRP_MASK (BIT(1) | BIT(0)) +#define TRP_LOW 3h +#define TRP_HIGH 5h +#define EBP_TRP_OFFSET 0 /* Start of TRP field in EBP*/ +#define EBP_TRCD_MASK (BIT(3) | BIT(2)) +#define TRCD_LOW 3h +#define TRCD_HIGH 5h +#define EBP_TRCD_OFFSET 2 /* Start of TRCD field in EBP*/ +#define EBP_TCL_MASK (BIT(5) | BIT(4)) +#define TCL_LOW 3 /* Minimum supported CL*/ +#define TCL_HIGH 5 /* Maximum supported CL*/ +#define EBP_TCL_OFFSET 4 /* EBP bit( )for CL mask*/ +#define EBP_DDR2_CL_5_0 BIT(5) /* CL 5.0 = 10b*/ +#define EBP_DDR2_CL_4_0 BIT(4) /* CL 4.0 = 01b*/ +#define EBP_DDR2_CL_3_0 00h /* CL 3.0 = 00b*/ +#define EBP_FREQ_MASK (BIT(10)| BIT(9)) +#define EBP_FREQ_OFFSET 9 /* EBP bit( )for frequency mask*/ +#define EBP_FREQ_400 0 /* 400MHz EBP[10:9] = 00b*/ +#define EBP_FREQ_533 BIT(9) /* 533MHz EBP[10:9] = 01b*/ +#define EBP_REFRESH_MASK (BIT(12)| BIT(11)) +#define EBP_REFRESH_OFFSET 11 /* Bit offset of refresh field*/ +#define EBP_REF_DIS 00h /* Mask for refresh disabled*/ +#define EBP_REF_128CLK BIT(11) /* Mask for 128 clks referesh rate*/ +#define EBP_REF_3_9 BIT(12) /* Mask for 3.9us refresh rate*/ +#define EBP_REF_7_8 (BIT(12)| BIT(11))/* Mask for 7.8us refresh rate*/ +#define EBP_WIDTH_MASK BIT(15) +#define EBP_WIDTH_OFFSET 15 /* Bit offset of EBP width field*/ +#define EBP_SOCKET_X16 BIT(15) /* Bit mask of x8/x16 bit*/ +#define EBP_DENSITY_MASK (BIT(17)| BIT(16)) +#define EBP_DENSITY_OFFSET 16 +#define EBP_DENSITY_512 BIT(16) /* 512Mbit density*/ +#define EBP_DENSITY_1024 BIT(17) /* 1024Mbit density*/ +#define EBP_DENSITY_2048 (BIT(17)| BIT(16))/* 2048Mbit density*/ +#define EBP_RANKS_MASK BIT(18) +#define EBP_RANKS_OFFSET 18 +#define EBP_RANKS BIT(18) /* Bit offset of # of ranks bit*/ +#define EBP_PACKAGE_TYPE BIT(19) /* Package type (stacked or not)*/ +#define EBP_2X_MASK BIT(20) +#define EBP_2X_OFFSET 20 /* Bit offset of ebp 2x refresh field*/ +#define EBP_2X_AUTO_REFRESH BIT(20) /* Bit mask of 2x refresh field*/ +#define EBP_DRAM_PARM_MASK BIT(21) +#define EBP_DRAM_PARM_OFFSET 21 +#define EBP_DRAM_PARM_SPD 0 /* Use SPD to get DRAM parameters*/ +#define EBP_DRAM_PARM_CMC BIT(21) /* DRAM parameters in CMC binary*/ +#define EBP_BOOT_PATH BIT(31) @@ -105,35 +105,35 @@ /* SCH Message Ports and Registers*/ -#define SCH_MSG_DUNIT_PORT 0x1 /* DRAM unit port */ -#define SCH_MSG_DUNIT_REG_DRP 0x0 /* DRAM Rank Population and Interface */ -#define DRP_FIELDS 0xFF /* Pertinent fields in DRP */ -#define DRP_RANK0_OFFSET 3 /* Rank 0 enable offset */ -#define DRP_RANK1_OFFSET 7 /* Rank 1 enable offset */ -#define DRP_DENSITY0_OFFSET 1 /* Density offset - Rank 0 */ -#define DRP_DENSITY1_OFFSET 5 /* Density offset - Rank 1 */ -#define DRP_WIDTH0_OFFSET 0 /* Width offset - Rank 0 */ -#define DRP_WIDTH1_OFFSET 4 /* Width offset - Rank 1 */ -#define DRP_CKE_DIS (BIT(14)| BIT(13)) /* CKE disable bits for both ranks */ -#define DRP_CKE_DIS0 BIT(13) /* CKE disable bit - Rank 0 */ -#define DRP_CKE_DIS1 BIT(14) /* CKE disable bit - Rank 1 */ -#define DRP_SCK_DIS (BIT(11)| BIT(10)) /* SCK/SCKB disable bits */ -#define DRP_SCK_DIS1 BIT(11) /* SCK[1]/SCKB[1] disable */ -#define DRP_SCK_DIS0 BIT(10) /* SCK[0]/SCKB[0] disable */ -#define SCH_MSG_DUNIT_REG_DTR 0x01 /* DRAM Timing Register */ -#define DTR_FIELDS 0x3F /* Pertinent fields in DTR */ -#define DTR_TCL_OFFSET 4 /* CAS latency offset */ -#define DTR_TRCD_OFFSET 2 /* RAS CAS Delay Offset */ -#define DTR_TRP_OFFSET 0 /* RAS Precharge Delay Offset */ -#define SCH_MSG_DUNIT_REG_DCO 0x2 /* DRAM Control Register */ -#define DCO_FIELDS 0xF /* Pertinent fields in DCO */ -#define DCO_REFRESH_OFFSET 2 /* Refresh Rate Field Offset */ -#define DCO_FREQ_OFFSET 0 /* DRAM Frequency Field Offset */ -#define DCO_IC BIT(7) /* Initialization complete bit */ -#define SCH_MSG_PUNIT_PORT 04h /* Punit Port */ -#define SCH_MSG_PUNIT_REG_PCR 71h /* Punit Control Register */ -#define SCH_MSG_TEST_PORT 05h /* Test port */ -#define SCH_MSG_TEST_REG_MSR 03h /* Mode and Status Register */ +#define SCH_MSG_DUNIT_PORT 0x1 /* DRAM unit port */ +#define SCH_MSG_DUNIT_REG_DRP 0x0 /* DRAM Rank Population and Interface */ +#define DRP_FIELDS 0xFF /* Pertinent fields in DRP */ +#define DRP_RANK0_OFFSET 3 /* Rank 0 enable offset */ +#define DRP_RANK1_OFFSET 7 /* Rank 1 enable offset */ +#define DRP_DENSITY0_OFFSET 1 /* Density offset - Rank 0 */ +#define DRP_DENSITY1_OFFSET 5 /* Density offset - Rank 1 */ +#define DRP_WIDTH0_OFFSET 0 /* Width offset - Rank 0 */ +#define DRP_WIDTH1_OFFSET 4 /* Width offset - Rank 1 */ +#define DRP_CKE_DIS (BIT(14)| BIT(13)) /* CKE disable bits for both ranks */ +#define DRP_CKE_DIS0 BIT(13) /* CKE disable bit - Rank 0 */ +#define DRP_CKE_DIS1 BIT(14) /* CKE disable bit - Rank 1 */ +#define DRP_SCK_DIS (BIT(11)| BIT(10)) /* SCK/SCKB disable bits */ +#define DRP_SCK_DIS1 BIT(11) /* SCK[1]/SCKB[1] disable */ +#define DRP_SCK_DIS0 BIT(10) /* SCK[0]/SCKB[0] disable */ +#define SCH_MSG_DUNIT_REG_DTR 0x01 /* DRAM Timing Register */ +#define DTR_FIELDS 0x3F /* Pertinent fields in DTR */ +#define DTR_TCL_OFFSET 4 /* CAS latency offset */ +#define DTR_TRCD_OFFSET 2 /* RAS CAS Delay Offset */ +#define DTR_TRP_OFFSET 0 /* RAS Precharge Delay Offset */ +#define SCH_MSG_DUNIT_REG_DCO 0x2 /* DRAM Control Register */ +#define DCO_FIELDS 0xF /* Pertinent fields in DCO */ +#define DCO_REFRESH_OFFSET 2 /* Refresh Rate Field Offset */ +#define DCO_FREQ_OFFSET 0 /* DRAM Frequency Field Offset */ +#define DCO_IC BIT(7) /* Initialization complete bit */ +#define SCH_MSG_PUNIT_PORT 04h /* Punit Port */ +#define SCH_MSG_PUNIT_REG_PCR 71h /* Punit Control Register */ +#define SCH_MSG_TEST_PORT 05h /* Test port */ +#define SCH_MSG_TEST_REG_MSR 03h /* Mode and Status Register */ /* Jedec initialization mapping into the MDR address field for DRAM init messages*/ |