diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/ec/google/chromeec/ec_commands.h | 203 |
1 files changed, 159 insertions, 44 deletions
diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h index 33045cf97a..0bb5db6081 100644 --- a/src/ec/google/chromeec/ec_commands.h +++ b/src/ec/google/chromeec/ec_commands.h @@ -103,10 +103,14 @@ extern "C" { /* * The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff * and they tell the kernel that so we have to think of it as two parts. + * + * Other BIOSes report only the I/O port region spanned by the Microchip + * MEC series EC; an attempt to address a larger region may fail. */ -#define EC_HOST_CMD_REGION0 0x800 -#define EC_HOST_CMD_REGION1 0x880 -#define EC_HOST_CMD_REGION_SIZE 0x80 +#define EC_HOST_CMD_REGION0 0x800 +#define EC_HOST_CMD_REGION1 0x880 +#define EC_HOST_CMD_REGION_SIZE 0x80 +#define EC_HOST_CMD_MEC_REGION_SIZE 0x8 /* EC command register bit functions */ #define EC_LPC_CMDR_DATA BIT(0) /* Data ready for host to read */ @@ -822,11 +826,15 @@ struct ec_lpc_host_args { #define EC_SPI_PAST_END 0xed /* - * EC is ready to receive, and has ignored the byte sent by the AP. EC expects + * EC is ready to receive, and has ignored the byte sent by the AP. EC expects * that the AP will send a valid packet header (starting with * EC_COMMAND_PROTOCOL_3) in the next 32 bytes. + * + * NOTE: Some SPI configurations place the Most Significant Bit on SDO when + * CS goes low. This macro has the Most Significant Bit set to zero, + * so SDO will not be driven high when CS goes low. */ -#define EC_SPI_RX_READY 0xf8 +#define EC_SPI_RX_READY 0x78 /* * EC has started receiving the request from the AP, but hasn't started @@ -1507,6 +1515,10 @@ enum ec_feature_code { * The EC supports entering and residing in S4. */ EC_FEATURE_S4_RESIDENCY = 44, + /* + * The EC supports the AP directing mux sets for the board. + */ + EC_FEATURE_TYPEC_AP_MUX_SET = 45, }; #define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32) @@ -1854,34 +1866,6 @@ struct ec_response_flash_region_info { uint32_t size; } __ec_align4; -/* - * Read/write VbNvContext - * - * Deprecated as of February 2021. No current devices use VBNV in EC - * BBRAM anymore, so this is guaranteed to fail. - * - * TODO(b/178689388): remove from this header once no external - * dependencies reference these constants. - */ -#define EC_CMD_VBNV_CONTEXT 0x0017 -#define EC_VER_VBNV_CONTEXT 1 -#define EC_VBNV_BLOCK_SIZE 16 - -enum ec_vbnvcontext_op { - EC_VBNV_CONTEXT_OP_READ, - EC_VBNV_CONTEXT_OP_WRITE, -}; - -struct ec_params_vbnvcontext { - uint32_t op; - uint8_t block[EC_VBNV_BLOCK_SIZE]; -} __ec_align4; - -struct ec_response_vbnvcontext { - uint8_t block[EC_VBNV_BLOCK_SIZE]; -} __ec_align4; - - /* Get SPI flash information */ #define EC_CMD_FLASH_SPI_INFO 0x0018 @@ -4713,6 +4697,39 @@ struct ec_params_dedicated_charger_limit { uint16_t voltage_lim; /* in mV */ } __ec_align2; +/* + * Get and set charging splashscreen variables + */ +#define EC_CMD_CHARGESPLASH 0x00A5 + +enum ec_chargesplash_cmd { + /* Get the current state variables */ + EC_CHARGESPLASH_GET_STATE = 0, + + /* Indicate initialization of the display loop */ + EC_CHARGESPLASH_DISPLAY_READY, + + /* Manually put the EC into the requested state */ + EC_CHARGESPLASH_REQUEST, + + /* Reset all state variables */ + EC_CHARGESPLASH_RESET, + + /* Manually trigger a lockout */ + EC_CHARGESPLASH_LOCKOUT, +}; + +struct __ec_align1 ec_params_chargesplash { + /* enum ec_chargesplash_cmd */ + uint8_t cmd; +}; + +struct __ec_align1 ec_response_chargesplash { + uint8_t requested; + uint8_t display_initialized; + uint8_t locked_out; +}; + /*****************************************************************************/ /* Hibernate/Deep Sleep Commands */ @@ -5664,6 +5681,15 @@ struct ec_response_charge_port_count { uint8_t port_count; } __ec_align1; +/* + * This command enable/disable dynamic PDO selection. + */ +#define EC_CMD_USB_PD_DPS_CONTROL 0x0106 + +struct ec_params_usb_pd_dps_control { + uint8_t enable; +} __ec_align1; + /* Write USB-PD device FW */ #define EC_CMD_USB_PD_FW_UPDATE 0x0110 @@ -6634,6 +6660,7 @@ enum typec_control_command { TYPEC_CONTROL_COMMAND_CLEAR_EVENTS, TYPEC_CONTROL_COMMAND_ENTER_MODE, TYPEC_CONTROL_COMMAND_TBT_UFP_REPLY, + TYPEC_CONTROL_COMMAND_USB_MUX_SET, }; /* Modes (USB or alternate) that a type-C port may enter. */ @@ -6649,6 +6676,11 @@ enum typec_tbt_ufp_reply { TYPEC_TBT_UFP_REPLY_ACK, }; +struct typec_usb_mux_set { + uint8_t mux_index; /* Index of the mux to set in the chain */ + uint8_t mux_flags; /* USB_PD_MUX_*-encoded USB mux state to set */ +} __ec_align1; + struct ec_params_typec_control { uint8_t port; uint8_t command; /* enum typec_control_command */ @@ -6666,6 +6698,8 @@ struct ec_params_typec_control { uint8_t mode_to_enter; /* Used for TBT_UFP_REPLY - enum typec_tbt_ufp_reply */ uint8_t tbt_ufp_reply; + /* Used for USB_MUX_SET */ + struct typec_usb_mux_set mux_params; uint8_t placeholder[128]; }; } __ec_align1; @@ -6753,6 +6787,8 @@ enum tcpc_cc_polarity { #define PD_STATUS_EVENT_SOP_PRIME_DISC_DONE BIT(1) #define PD_STATUS_EVENT_HARD_RESET BIT(2) #define PD_STATUS_EVENT_DISCONNECTED BIT(3) +#define PD_STATUS_EVENT_MUX_0_SET_DONE BIT(4) +#define PD_STATUS_EVENT_MUX_1_SET_DONE BIT(5) /* * Encode and decode for BCD revision response @@ -6913,7 +6949,20 @@ struct ec_response_pchg { /* Fields added in version 1 */ uint32_t fw_version; uint32_t dropped_event_count; -} __ec_align2; +} __ec_align4; + +struct ec_response_pchg_v2 { + uint32_t error; /* enum pchg_error */ + uint8_t state; /* enum pchg_state state */ + uint8_t battery_percentage; + uint8_t unused0; + uint8_t unused1; + /* Fields added in version 1 */ + uint32_t fw_version; + uint32_t dropped_event_count; + /* Fields added in version 2 */ + uint32_t dropped_host_event_count; +} __ec_align4; enum pchg_state { /* Charger is reset and not initialized. */ @@ -6959,7 +7008,7 @@ enum pchg_state { #define EC_MKBP_PCHG_PORT_SHIFT 28 /* Utility macros for converting MKBP event <-> port number. */ #define EC_MKBP_PCHG_EVENT_TO_PORT(e) (((e) >> EC_MKBP_PCHG_PORT_SHIFT) & 0xf) -#define EC_MKBP_PCHG_PORT_TO_EVENT(p) (BIT((p) + EC_MKBP_PCHG_PORT_SHIFT)) +#define EC_MKBP_PCHG_PORT_TO_EVENT(p) ((p) << EC_MKBP_PCHG_PORT_SHIFT) /* Utility macro for extracting event bits. */ #define EC_MKBP_PCHG_EVENT_MASK(e) ((e) \ & GENMASK(EC_MKBP_PCHG_PORT_SHIFT-1, 0)) @@ -7058,6 +7107,66 @@ struct ec_response_i2c_control { } cmd_response; } __ec_align_size1; +#define EC_CMD_RGBKBD_SET_COLOR 0x013A +#define EC_CMD_RGBKBD 0x013B + +#define EC_RGBKBD_MAX_KEY_COUNT 128 +#define EC_RGBKBD_MAX_RGB_COLOR 0xFFFFFF +#define EC_RGBKBD_MAX_SCALE 0xFF + +enum rgbkbd_state { + /* RGB keyboard is reset and not initialized. */ + RGBKBD_STATE_RESET = 0, + /* RGB keyboard is initialized but not enabled. */ + RGBKBD_STATE_INITIALIZED, + /* RGB keyboard is disabled. */ + RGBKBD_STATE_DISABLED, + /* RGB keyboard is enabled and ready to receive a command. */ + RGBKBD_STATE_ENABLED, + + /* Put no more entry below */ + RGBKBD_STATE_COUNT, +}; + +enum ec_rgbkbd_subcmd { + EC_RGBKBD_SUBCMD_CLEAR = 1, + EC_RGBKBD_SUBCMD_DEMO = 2, + EC_RGBKBD_SUBCMD_SET_SCALE = 3, + EC_RGBKBD_SUBCMD_COUNT +}; + +enum ec_rgbkbd_demo { + EC_RGBKBD_DEMO_OFF = 0, + EC_RGBKBD_DEMO_FLOW = 1, + EC_RGBKBD_DEMO_DOT = 2, + EC_RGBKBD_DEMO_COUNT, +}; + +BUILD_ASSERT(EC_RGBKBD_DEMO_COUNT <= 255); + +struct ec_rgbkbd_set_scale { + uint8_t key; + struct rgb_s scale; +}; + +struct ec_params_rgbkbd { + uint8_t subcmd; /* Sub-command (enum ec_rgbkbd_subcmd) */ + union { + struct rgb_s color; /* EC_RGBKBD_SUBCMD_CLEAR */ + uint8_t demo; /* EC_RGBKBD_SUBCMD_DEMO */ + struct ec_rgbkbd_set_scale set_scale; + }; +} __ec_align1; + +struct ec_params_rgbkbd_set_color { + /* Specifies the starting key ID whose color is being changed. */ + uint8_t start_key; + /* Specifies # of elements in <color>. */ + uint8_t length; + /* RGB color data array of length up to MAX_KEY_COUNT. */ + struct rgb_s color[]; +} __ec_align1; + /*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ @@ -7120,22 +7229,28 @@ struct ec_params_fp_passthru { /* Capture types defined in bits [30..28] */ #define FP_MODE_CAPTURE_TYPE_SHIFT 28 #define FP_MODE_CAPTURE_TYPE_MASK (0x7 << FP_MODE_CAPTURE_TYPE_SHIFT) -/* - * This enum must remain ordered, if you add new values you must ensure that - * FP_CAPTURE_TYPE_MAX is still the last one. +/** + * enum fp_capture_type - Specifies the "mode" when capturing images. + * + * @FP_CAPTURE_VENDOR_FORMAT: Capture 1-3 images and choose the best quality + * image (produces 'frame_size' bytes) + * @FP_CAPTURE_SIMPLE_IMAGE: Simple raw image capture (produces width x height x + * bpp bits) + * @FP_CAPTURE_PATTERN0: Self test pattern (e.g. checkerboard) + * @FP_CAPTURE_PATTERN1: Self test pattern (e.g. inverted checkerboard) + * @FP_CAPTURE_QUALITY_TEST: Capture for Quality test with fixed contrast + * @FP_CAPTURE_RESET_TEST: Capture for pixel reset value test + * @FP_CAPTURE_TYPE_MAX: End of enum + * + * @note This enum must remain ordered, if you add new values you must ensure + * that FP_CAPTURE_TYPE_MAX is still the last one. */ enum fp_capture_type { - /* Full blown vendor-defined capture (produces 'frame_size' bytes) */ FP_CAPTURE_VENDOR_FORMAT = 0, - /* Simple raw image capture (produces width x height x bpp bits) */ FP_CAPTURE_SIMPLE_IMAGE = 1, - /* Self test pattern (e.g. checkerboard) */ FP_CAPTURE_PATTERN0 = 2, - /* Self test pattern (e.g. inverted checkerboard) */ FP_CAPTURE_PATTERN1 = 3, - /* Capture for Quality test with fixed contrast */ FP_CAPTURE_QUALITY_TEST = 4, - /* Capture for pixel reset value test */ FP_CAPTURE_RESET_TEST = 5, FP_CAPTURE_TYPE_MAX, }; |