summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/amd')
-rw-r--r--src/southbridge/amd/sb600/chip.h8
-rw-r--r--src/southbridge/amd/sb600/sb600_early_setup.c15
-rw-r--r--src/southbridge/amd/sb600/sb600_hda.c4
-rw-r--r--src/southbridge/amd/sb600/sb600_ide.c5
-rw-r--r--src/southbridge/amd/sb600/sb600_lpc.c10
-rw-r--r--src/southbridge/amd/sb600/sb600_reset.c2
-rw-r--r--src/southbridge/amd/sb600/sb600_sata.c18
-rw-r--r--src/southbridge/amd/sb600/sb600_sm.c77
-rw-r--r--src/southbridge/amd/sb600/sb600_smbus.c30
-rw-r--r--src/southbridge/amd/sb600/sb600_smbus.h2
10 files changed, 111 insertions, 60 deletions
diff --git a/src/southbridge/amd/sb600/chip.h b/src/southbridge/amd/sb600/chip.h
index 808d358965..4dc4c16274 100644
--- a/src/southbridge/amd/sb600/chip.h
+++ b/src/southbridge/amd/sb600/chip.h
@@ -20,11 +20,11 @@
#ifndef SB600_CHIP_H
#define SB600_CHIP_H
-struct southbridge_amd_sb600_config
+struct southbridge_amd_sb600_config
{
- unsigned int ide0_enable : 1;
- unsigned int sata0_enable : 1;
- unsigned long hda_viddid;
+ u32 ide0_enable : 1;
+ u32 sata0_enable : 1;
+ u32 hda_viddid;
};
struct chip_operations;
extern struct chip_operations southbridge_amd_sb600_ops;
diff --git a/src/southbridge/amd/sb600/sb600_early_setup.c b/src/southbridge/amd/sb600/sb600_early_setup.c
index 7f588e9ce7..3ed9f53ac5 100644
--- a/src/southbridge/amd/sb600/sb600_early_setup.c
+++ b/src/southbridge/amd/sb600/sb600_early_setup.c
@@ -24,6 +24,7 @@
#define SMBUS_IO_BASE 0x1000 /* Is it a temporary SMBus I/O base address? */
/*SIZE 0x40 */
+
static void pmio_write(u8 reg, u8 value)
{
outb(reg, PM_INDEX);
@@ -44,6 +45,7 @@ static u8 get_sb600_revision()
if (dev == PCI_DEV_INVALID) {
die("SMBUS controller not found\r\n");
+ /* NOT REACHED */
}
return pci_read_config8(dev, 0x08);
}
@@ -259,6 +261,7 @@ static void sb600_devices_por_init()
if (dev == PCI_DEV_INVALID) {
die("SMBUS controller not found\r\n");
+ /* NOT REACHED */
}
printk_info("SMBus controller enabled, sb revision is 0x%x\r\n",
get_sb600_revision());
@@ -317,7 +320,7 @@ static void sb600_devices_por_init()
pci_write_config8(dev, 0x62, byte);
/* Features Enable */
- pci_write_config32(dev, 0x64, 0x829E79BF);
+ pci_write_config32(dev, 0x64, 0x829E7DBF); /* bit10: Enables the HPET interrupt. */
/* SerialIrq Control */
pci_write_config8(dev, 0x69, 0x90);
@@ -373,7 +376,7 @@ static void sb600_devices_por_init()
byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */
pci_write_config8(dev, 0x4A, byte);
- /* Set LPC ROM size, it has been done in sb600_lpc_init().
+ /* Set LPC ROM size, it has been done in sb600_lpc_init().
* enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB;
* enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB
* pci_write_config16(dev, 0x68, 0x000e)
@@ -382,7 +385,7 @@ static void sb600_devices_por_init()
/* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */
pci_write_config8(dev, 0x7C, 0x05);
- /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM,
+ /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM,
* TODO: I don't know what are their mean? */
printk_info("sb600_devices_por_init(): P2P Bridge, BDF:0-20-4\n");
dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0);
@@ -397,7 +400,7 @@ static void sb600_devices_por_init()
pci_write_config8(dev, 0x40, 0x26);
- /* I don't know why CIM set reg0x1c as 0x11.
+ /* I don't know why CIM set reg0x1c as 0x11.
* System will block at sdram_initialize() if I set it before call sdram_initialize().
* If it is necessary to set reg0x1c as 0x11, please call this function after sdram_initialize().
* pci_write_config8(dev, 0x1c, 0x11);
@@ -490,8 +493,10 @@ static void sb600_pmio_por_init()
pmio_write(0x9e, byte);
/* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */
+ /* We have to clear this bit here, otherwise the kernel hangs. */
byte = pmio_read(0x55);
byte |= 1 << 7;
+ byte |= 1 << 1;
pmio_write(0x55, byte);
/* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */
@@ -550,7 +555,7 @@ static void sb600_pci_cfg()
byte |= (1 << 3);
pci_write_config8(dev, 0x41, byte);
- /* Set to 1 to reset USB on the software (such as IO-64 or IO-CF9 cycles)
+ /* Set to 1 to reset USB on the software (such as IO-64 or IO-CF9 cycles)
* generated PCIRST#. */
byte = pmio_read(0x65);
byte |= (1 << 4);
diff --git a/src/southbridge/amd/sb600/sb600_hda.c b/src/southbridge/amd/sb600/sb600_hda.c
index ca46b21963..e123187c68 100644
--- a/src/southbridge/amd/sb600/sb600_hda.c
+++ b/src/southbridge/amd/sb600/sb600_hda.c
@@ -55,7 +55,7 @@ static int set_bits(u8 * port, u32 mask, u32 val)
return 0;
}
-static int codec_detect(u8 * base)
+static u32 codec_detect(u8 * base)
{
u32 dword;
@@ -148,7 +148,7 @@ static u32 cim_verb_data[] = {
0x01f71ec4,
0x01f71f01,
};
-static unsigned find_verb(u32 viddid, u32 ** verb)
+static u32 find_verb(u32 viddid, u32 ** verb)
{
device_t azalia_dev = dev_find_slot(0, PCI_DEVFN(0x14, 2));
struct southbridge_amd_sb600_config *cfg =
diff --git a/src/southbridge/amd/sb600/sb600_ide.c b/src/southbridge/amd/sb600/sb600_ide.c
index 04afe83744..afe3f01fcc 100644
--- a/src/southbridge/amd/sb600/sb600_ide.c
+++ b/src/southbridge/amd/sb600/sb600_ide.c
@@ -38,13 +38,10 @@ static void ide_init(struct device *dev)
pci_write_config32(dev, 0x70, dword);
/* Ultra DMA mode */
+ /* enable UDMA */
byte = pci_read_config8(dev, 0x54);
byte |= 1 << 0;
pci_write_config8(dev, 0x54, byte);
- byte = pci_read_config8(dev, 0x56);
- byte &= ~(7 << 0);
- byte |= 5 << 0; /* mode 5 */
- pci_write_config8(dev, 0x56, byte);
/* Enable I/O Access&& Bus Master */
dword = pci_read_config16(dev, 0x4);
diff --git a/src/southbridge/amd/sb600/sb600_lpc.c b/src/southbridge/amd/sb600/sb600_lpc.c
index 83dea99883..50d00e25fa 100644
--- a/src/southbridge/amd/sb600/sb600_lpc.c
+++ b/src/southbridge/amd/sb600/sb600_lpc.c
@@ -82,14 +82,14 @@ static void sb600_lpc_read_resources(device_t dev)
compact_resources(dev);
}
-/**
+/**
* @brief Enable resources for children devices
- *
+ *
* @param dev the device whos children's resources are to be enabled
- *
+ *
* This function is call by the global enable_resources() indirectly via the
* device_operation::enable_resources() method of devices.
- *
+ *
* Indirect mutual recursion:
* enable_childrens_resources() -> enable_resources()
* enable_resources() -> device_operation::enable_resources()
@@ -115,7 +115,7 @@ static void sb600_lpc_enable_childrens_resources(device_t dev)
&& (child->path.type == DEVICE_PATH_PNP)) {
for (i = 0; i < child->resources; i++) {
struct resource *res;
- unsigned long base, end; /* don't need long long */
+ u32 base, end; /* don't need long long */
res = &child->resource[i];
if (!(res->flags & IORESOURCE_IO))
continue;
diff --git a/src/southbridge/amd/sb600/sb600_reset.c b/src/southbridge/amd/sb600/sb600_reset.c
index d46f734c3d..68913b4846 100644
--- a/src/southbridge/amd/sb600/sb600_reset.c
+++ b/src/southbridge/amd/sb600/sb600_reset.c
@@ -24,7 +24,7 @@
(((DEV) & 0x1F) << 15) | \
(((FN) & 0x7) << 12))
-typedef unsigned device_t;
+typedef u32 device_t;
#include "../../../northbridge/amd/amdk8/reset_test.c"
diff --git a/src/southbridge/amd/sb600/sb600_sata.c b/src/southbridge/amd/sb600/sb600_sata.c
index 995e5a7376..5b3c500bd9 100644
--- a/src/southbridge/amd/sb600/sb600_sata.c
+++ b/src/southbridge/amd/sb600/sb600_sata.c
@@ -62,12 +62,12 @@ static void sata_init(struct device *dev)
sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x7;
sata_bar4 = pci_read_config16(dev, 0x20) & ~0x7;
- printk_debug("sata_bar0=%x\n", sata_bar0); /* 3030 */
- printk_debug("sata_bar1=%x\n", sata_bar1); /* 3070 */
- printk_debug("sata_bar2=%x\n", sata_bar2); /* 3040 */
- printk_debug("sata_bar3=%x\n", sata_bar3); /* 3080 */
- printk_debug("sata_bar4=%x\n", sata_bar4); /* 3000 */
- printk_debug("sata_bar5=%x\n", sata_bar5); /* e0309000 */
+ /* printk_debug("sata_bar0=%x\n", sata_bar0); */ /* 3030 */
+ /* printk_debug("sata_bar1=%x\n", sata_bar1); */ /* 3070 */
+ /* printk_debug("sata_bar2=%x\n", sata_bar2); */ /* 3040 */
+ /* printk_debug("sata_bar3=%x\n", sata_bar3); */ /* 3080 */
+ /* printk_debug("sata_bar4=%x\n", sata_bar4); */ /* 3000 */
+ /* printk_debug("sata_bar5=%x\n", sata_bar5); */ /* e0309000 */
/* Program the 2C to 0x43801002 */
dword = 0x43801002;
@@ -142,15 +142,15 @@ static void sata_init(struct device *dev)
/* Use BAR5+0x2A8,BAR0+0x6 for Secondary Slave */
byte = readb(sata_bar5 + 0x128);
- printk_debug("byte=%x\n", byte);
+ /* printk_debug("byte=%x\n", byte); */
byte &= 0xF;
if (byte == 0x3) {
outb(0xA0, sata_bar0 + 0x6);
while ((inb(sata_bar0 + 0x6) != 0xA0)
|| ((inb(sata_bar0 + 0x7) & 0x88) != 0)) {
mdelay(10);
- printk_debug("0x6=%x,0x7=%x\n", inb(sata_bar0 + 0x6),
- inb(sata_bar0 + 0x7));
+ /* printk_debug("0x6=%x,0x7=%x\n", inb(sata_bar0 + 0x6),
+ inb(sata_bar0 + 0x7)); */
printk_debug("drive detection fail,trying...\n");
}
printk_debug("Primary master device is ready\n");
diff --git a/src/southbridge/amd/sb600/sb600_sm.c b/src/southbridge/amd/sb600/sb600_sm.c
index 97ad48f398..d6643ab91b 100644
--- a/src/southbridge/amd/sb600/sb600_sm.c
+++ b/src/southbridge/amd/sb600/sb600_sm.c
@@ -41,8 +41,8 @@
#endif
struct ioapicreg {
- unsigned int reg;
- unsigned int value_low, value_high;
+ u32 reg;
+ u32 value_low, value_high;
};
static struct ioapicreg ioapicregvalues[] = {
@@ -89,18 +89,18 @@ static struct ioapicreg ioapicregvalues[] = {
/* Be careful and don't write past the end... */
};
-static void setup_ioapic(unsigned long ioapic_base)
+static void setup_ioapic(u32 ioapic_base)
{
int i;
- unsigned long value_low, value_high;
- volatile unsigned long *l;
+ u32 value_low, value_high;
+ volatile u32 *l;
struct ioapicreg *a = ioapicregvalues;
ioapicregvalues[0].value_high = lapicid() << (56 - 32);
printk_debug("lapicid = %016x\n", ioapicregvalues[0].value_high);
- l = (unsigned long *)ioapic_base;
+ l = (u32 *)ioapic_base;
for (i = 0; i < ARRAY_SIZE(ioapicregvalues);
i++, a++) {
@@ -126,9 +126,9 @@ static void sm_init(device_t dev)
u8 byte;
u8 byte_old;
u32 dword;
- unsigned long ioapic_base;
- int on;
- int nmi_option;
+ u32 ioapic_base;
+ u32 on;
+ u32 nmi_option;
printk_info("sm_init().\n");
@@ -143,6 +143,10 @@ static void sm_init(device_t dev)
dword |= 1 << 9;
pci_write_config32(dev, 0x78, dword); /* enable 0xCD6 0xCD7 */
+ /* bit 10: MultiMediaTimerIrqEn */
+ dword = pci_read_config8(dev, 0x64);
+ dword |= 1 << 10;
+ pci_write_config8(dev, 0x64, dword);
/* enable serial irq */
byte = pci_read_config8(dev, 0x69);
byte |= 1 << 7; /* enable serial irq function */
@@ -191,8 +195,21 @@ static void sm_init(device_t dev)
byte = pm_ioread(0x68);
byte &= ~(1 << 1);
+ /* 2.6 */
+ byte |= 1 << 2;
pm_iowrite(0x68, byte);
+ /* 2.6 */
+ byte = pm_ioread(0x65);
+ byte &= ~(1 << 7);
+ pm_iowrite(0x65, byte);
+
+ /* 2.3.4 */
+ byte = pm_ioread(0x52);
+ byte &= ~0x2F;
+ byte |= 0x8;
+ pm_iowrite(0x52, byte);
+
byte = pm_ioread(0x8D);
byte &= ~(1 << 6);
pm_iowrite(0x8D, byte);
@@ -344,9 +361,19 @@ static struct smbus_bus_operations lops_smbus_bus = {
static void sb600_sm_read_resources(device_t dev)
{
struct resource *res;
+ u8 byte;
+
+ /* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */
+ byte = pm_ioread(0x55);
+ byte |= 1 << 7;
+ pm_iowrite(0x55, byte);
/* Get the normal pci resources of this device */
- pci_dev_read_resources(dev);
+ /* pci_dev_read_resources(dev); */
+
+ byte = pm_ioread(0x55);
+ byte &= ~(1 << 7);
+ pm_iowrite(0x55, byte);
/* apic */
res = new_resource(dev, 0x74);
@@ -357,19 +384,49 @@ static void sb600_sm_read_resources(device_t dev)
res->gran = 8;
res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
+ res = new_resource(dev, 0x14); /* hpet */
+ res->base = 0xfed00000; /* reset hpet to widely accepted address */
+ res->size = 0x400;
+ res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
/* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */
+ /* smbus */
+ res = new_resource(dev, 0x10);
+ res->base = 0xB00;
+ res->size = 0x10;
+ res->limit = 0xFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_IO | IORESOURCE_FIXED;
+
+
compact_resources(dev);
}
static void sb600_sm_set_resources(struct device *dev)
{
struct resource *res;
+ u8 byte;
pci_dev_set_resources(dev);
+
+ /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */
+ byte = pm_ioread(0x52);
+ byte |= 1 << 6;
+ pm_iowrite(0x52, byte);
+
res = find_resource(dev, 0x74);
pci_write_config32(dev, 0x74, res->base | 1 << 3);
+
+ res = find_resource(dev, 0x14);
+ pci_write_config32(dev, 0x14, res->base);
+
+ res = find_resource(dev, 0x10);
+ pci_write_config32(dev, 0x10, res->base | 1);
}
static struct pci_operations lops_pci = {
diff --git a/src/southbridge/amd/sb600/sb600_smbus.c b/src/southbridge/amd/sb600/sb600_smbus.c
index 038cd14b7b..df7ec56c3e 100644
--- a/src/southbridge/amd/sb600/sb600_smbus.c
+++ b/src/southbridge/amd/sb600/sb600_smbus.c
@@ -17,12 +17,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-//#include <arch/io.h>
-//#include <device/device.h>
-//#include <device/pci.h>
-//#include <device/pci_ids.h>
-//#include <device/pci_ops.h>
-//#include <device/smbus_def.h>
#include "sb600_smbus.h"
static inline void smbus_delay(void)
@@ -32,7 +26,7 @@ static inline void smbus_delay(void)
static int smbus_wait_until_ready(u32 smbus_io_base)
{
- unsigned long loops;
+ u32 loops;
loops = SMBUS_TIMEOUT;
do {
u8 val;
@@ -48,7 +42,7 @@ static int smbus_wait_until_ready(u32 smbus_io_base)
static int smbus_wait_until_done(u32 smbus_io_base)
{
- unsigned long loops;
+ u32 loops;
loops = SMBUS_TIMEOUT;
do {
u8 val;
@@ -121,7 +115,7 @@ static int do_smbus_send_byte(u32 smbus_io_base, u32 device,
return 0;
}
-static int do_smbus_read_byte(u32 smbus_io_base, u32 device,
+int do_smbus_read_byte(u32 smbus_io_base, u32 device,
u32 address)
{
u8 byte;
@@ -152,7 +146,7 @@ static int do_smbus_read_byte(u32 smbus_io_base, u32 device,
return byte;
}
-static int do_smbus_write_byte(u32 smbus_io_base, u32 device,
+int do_smbus_write_byte(u32 smbus_io_base, u32 device,
u32 address, u8 val)
{
u8 byte;
@@ -183,10 +177,11 @@ static int do_smbus_write_byte(u32 smbus_io_base, u32 device,
return 0;
}
-static void alink_ab_indx(unsigned int reg_space, unsigned int reg_addr,
- unsigned int mask, unsigned int val)
+static void alink_ab_indx(u32 reg_space, u32 reg_addr,
+ u32 mask, u32 val)
{
- unsigned int tmp;
+ u32 tmp;
+
outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);
tmp = inl(AB_DATA);
@@ -201,10 +196,10 @@ static void alink_ab_indx(unsigned int reg_space, unsigned int reg_addr,
/* space = 0: AX_INDXC, AX_DATAC
* space = 1: AX_INDXP, AX_DATAP
*/
-static void alink_ax_indx(unsigned int space /*c or p? */ , unsigned int axindc,
- unsigned int mask, unsigned int val)
+static void alink_ax_indx(u32 space /*c or p? */ , u32 axindc,
+ u32 mask, u32 val)
{
- unsigned int tmp;
+ u32 tmp;
/* read axindc to tmp */
outl(space << 30 | space << 3 | 0x30, AB_INDX);
@@ -221,6 +216,3 @@ static void alink_ax_indx(unsigned int space /*c or p? */ , unsigned int axindc,
outl(space << 30 | space << 3 | 0x34, AB_INDX);
outl(tmp, AB_DATA);
}
-
-
-
diff --git a/src/southbridge/amd/sb600/sb600_smbus.h b/src/southbridge/amd/sb600/sb600_smbus.h
index 3fb6c794bd..83dfb8f20c 100644
--- a/src/southbridge/amd/sb600/sb600_smbus.h
+++ b/src/southbridge/amd/sb600/sb600_smbus.h
@@ -44,7 +44,7 @@
#define AB_INDX 0xCD8
#define AB_DATA (AB_INDX+4)
-/* Between 1-10 seconds, We should never timeout normally
+/* Between 1-10 seconds, We should never timeout normally
* Longer than this is just painful when a timeout condition occurs.
*/
#define SMBUS_TIMEOUT (100*1000*10)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 17:01:33 +0000