diff options
Diffstat (limited to 'src/soc')
| -rw-r--r-- | src/soc/amd/common/block/include/amdblocks/acpimmio.h | 4 | ||||
| -rw-r--r-- | src/soc/amd/common/block/smbus/smbus_early_fch.c | 14 |
2 files changed, 14 insertions, 4 deletions
diff --git a/src/soc/amd/common/block/include/amdblocks/acpimmio.h b/src/soc/amd/common/block/include/amdblocks/acpimmio.h index 3887f73cf7..865ad48a9b 100644 --- a/src/soc/amd/common/block/include/amdblocks/acpimmio.h +++ b/src/soc/amd/common/block/include/amdblocks/acpimmio.h @@ -15,12 +15,12 @@ * newer SoCs, but not for the generations with separate FCH or Kabini. */ #define PM_DECODE_EN 0x00 +#define SMBUS_ASF_IO_BASE_SHIFT 8 +#define SMBUS_ASF_IO_BASE_MASK (0xff << SMBUS_ASF_IO_BASE_SHIFT) #define SMBUS_ASF_IO_EN (1 << 4) #define CF9_IO_EN (1 << 1) #define LEGACY_IO_EN (1 << 0) -#define SMB_ASF_IO_BASE 0x01 /* part of PM_DECODE_EN */ - /* * Earlier devices enable the ACPIMMIO bank decodes in PMx24. All discrete FCHs * and the Kabini SoC fall into this category. Kabini's successor, Mullins, uses diff --git a/src/soc/amd/common/block/smbus/smbus_early_fch.c b/src/soc/amd/common/block/smbus/smbus_early_fch.c index 3d04778b24..2b204253d4 100644 --- a/src/soc/amd/common/block/smbus/smbus_early_fch.c +++ b/src/soc/amd/common/block/smbus/smbus_early_fch.c @@ -3,14 +3,24 @@ #include <stdint.h> #include <amdblocks/acpimmio.h> #include <amdblocks/smbus.h> -#include <soc/southbridge.h> +#include <soc/iomap.h> + +static void fch_smbus_enable_decode(uint16_t base) +{ + uint32_t val = pm_read32(PM_DECODE_EN); + /* Configure upper byte of the I/O address; lower byte is always 0 */ + val = (val & ~SMBUS_ASF_IO_BASE_MASK) | (base & SMBUS_ASF_IO_BASE_MASK); + /* Set enable decode bit even though it should already be set */ + val |= SMBUS_ASF_IO_EN; + pm_write32(PM_DECODE_EN, val); +} void fch_smbus_init(void) { /* 400 kHz smbus speed. */ const uint8_t smbus_speed = (66000000 / (400000 * 4)); - pm_write8(SMB_ASF_IO_BASE, SMB_BASE_ADDR >> 8); + fch_smbus_enable_decode(SMB_BASE_ADDR); smbus_write8(SMBTIMING, smbus_speed); /* Clear all SMBUS status bits */ smbus_write8(SMBHSTSTAT, SMBHST_STAT_CLEAR); |