diff options
Diffstat (limited to 'src/soc/intel')
| -rw-r--r-- | src/soc/intel/broadwell/sata.c | 45 |
1 files changed, 20 insertions, 25 deletions
diff --git a/src/soc/intel/broadwell/sata.c b/src/soc/intel/broadwell/sata.c index 3b9c1d81f7..f524184338 100644 --- a/src/soc/intel/broadwell/sata.c +++ b/src/soc/intel/broadwell/sata.c @@ -48,6 +48,7 @@ static void sata_init(struct device *dev) u32 reg32; u8 *abar; u16 reg16; + int port; printk(BIOS_DEBUG, "SATA: Initializing controller in AHCI mode.\n"); @@ -82,18 +83,9 @@ static void sata_init(struct device *dev) /* Setup register 98h */ reg32 = pci_read_config16(dev, 0x98); - reg32 |= 1 << 19; /* BWG step 6 */ - reg32 |= 1 << 22; /* BWG step 5 */ - reg32 &= ~(0x3f << 7); - reg32 |= 0x04 << 7; /* BWG step 7 */ - reg32 |= 1 << 20; /* BWG step 8 */ - reg32 &= ~(0x03 << 5); - reg32 |= 1 << 5; /* BWG step 9 */ - reg32 |= 1 << 18; /* BWG step 10 */ - reg32 |= 1 << 29; /* BWG step 11 */ reg32 &= ~((1 << 31) | (1 << 30)); reg32 |= 1 << 23; - reg32 |= 1 << 24; /* Disable listen mode (hotplug) */ + reg32 |= 1 << 24; /* Enable MPHY Dynamic Power Gating */ pci_write_config32(dev, 0x98, reg32); /* Setup register 9Ch */ @@ -111,20 +103,30 @@ static void sata_init(struct device *dev) abar = (u8 *)(pci_read_config32(dev, PCI_BASE_ADDRESS_5)); printk(BIOS_DEBUG, "ABAR: %p\n", abar); - /* CAP (HBA Capabilities) : enable power management */ - reg32 = read32(abar + 0x00); - reg32 |= 0x0c006000; // set PSC+SSC+SALP+SSS - reg32 &= ~0x00020060; // clear SXS+EMS+PMS - reg32 |= (1 << 18); // SAM: SATA AHCI MODE ONLY - write32(abar + 0x00, reg32); - /* PI (Ports implemented) */ write32(abar + 0x0c, config->sata_port_map); (void) read32(abar + 0x0c); /* Read back 1 */ (void) read32(abar + 0x0c); /* Read back 2 */ /* CAP2 (HBA Capabilities Extended)*/ - reg32 = read32(abar + 0x24); + if (config->sata_devslp_disable) { + reg32 = read32(abar + 0x24); + reg32 &= ~(1 << 3); + write32(abar + 0x24, reg32); + } else { + /* Enable DEVSLP */ + reg32 = read32(abar + 0x24); + reg32 |= (1 << 5)|(1 << 4)|(1 << 3)|(1 << 2); + write32(abar + 0x24, reg32); + + for (port = 0; port < 4; port++) { + if (!(config->sata_port_map & (1 << port))) + continue; + reg32 = read32(abar + 0x144 + (0x80 * port)); + reg32 |= (1 << 1); /* DEVSLP DSP */ + write32(abar + 0x144 + (0x80 * port), reg32); + } + } /* * Static Power Gating for unused ports @@ -138,13 +140,6 @@ static void sata_init(struct device *dev) reg32 |= (1 << 20) | (1 << 18); RCBA32(0x3a84) = reg32; - /* Enable DEVSLP */ - if (config->sata_devslp_disable) - reg32 &= ~(1 << 3); - else - reg32 |= (1 << 5)|(1 << 4)|(1 << 3)|(1 << 2); - write32(abar + 0x24, reg32); - /* Set Gen3 Transmitter settings if needed */ if (config->sata_port0_gen3_tx) pch_iobp_update(SATA_IOBP_SP0G3IR, 0, |