summaryrefslogtreecommitdiff
path: root/src/soc/intel/apollolake
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/intel/apollolake')
-rw-r--r--src/soc/intel/apollolake/Makefile.inc1
-rw-r--r--src/soc/intel/apollolake/include/soc/meminit.h97
-rw-r--r--src/soc/intel/apollolake/meminit.c213
3 files changed, 311 insertions, 0 deletions
diff --git a/src/soc/intel/apollolake/Makefile.inc b/src/soc/intel/apollolake/Makefile.inc
index 5cc4f26099..240d3c2a69 100644
--- a/src/soc/intel/apollolake/Makefile.inc
+++ b/src/soc/intel/apollolake/Makefile.inc
@@ -26,6 +26,7 @@ romstage-y += gpio.c
romstage-$(CONFIG_SOC_UART_DEBUG) += uart_early.c
romstage-y += lpc_lib.c
romstage-y += memmap.c
+romstage-y += meminit.c
romstage-y += mmap_boot.c
romstage-y += tsc_freq.c
romstage-y += pmutil.c
diff --git a/src/soc/intel/apollolake/include/soc/meminit.h b/src/soc/intel/apollolake/include/soc/meminit.h
new file mode 100644
index 0000000000..18c59a4768
--- /dev/null
+++ b/src/soc/intel/apollolake/include/soc/meminit.h
@@ -0,0 +1,97 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_APOLLOLAKE_MEMINIT_H_
+#define _SOC_APOLLOLAKE_MEMINIT_H_
+
+#include <stdint.h>
+
+/*
+ * LPDDR4 helper routines for configuring the memory UPD for LPDDR4 operation.
+ * There are 4 physical LPDDR4 channels each 32-bits wide. There are 2 logical
+ * channels using 2 physical channels together to form a 64-bit interface to
+ * memory for each logical channel.
+ */
+
+enum {
+ LP4_PHYS_CH0A,
+ LP4_PHYS_CH0B,
+ LP4_PHYS_CH1A,
+ LP4_PHYS_CH1B,
+ LP4_NUM_PHYS_CHANNELS,
+};
+
+/* Logical channel identification. */
+enum {
+ LP4_LCH0,
+ LP4_LCH1,
+};
+
+/*
+ * The DQs within a physical channel can be bit-swizzled within each byte.
+ * Within a channel the bytes can be swapped, but the DQs need to be routed
+ * with the corresponding DQS (strobe).
+ */
+enum {
+ LP4_DQS0,
+ LP4_DQS1,
+ LP4_DQS2,
+ LP4_DQS3,
+ LP4_NUM_BYTE_LANES,
+ DQ_BITS_PER_DQS = 8,
+};
+
+enum {
+ /* RL-tRCD-tRP */
+ LP4_SPEED_1600 = 1600, /* 14-15-15 */
+ LP4_SPEED_2133 = 2133, /* 20-20-20 */
+ LP4_SPEED_2400 = 2400, /* 24-22-22 */
+};
+
+/* LPDDR4 module density in bits. */
+enum {
+ LP4_8Gb_DENSITY,
+ LP4_12Gb_DESNITY,
+ LP4_16Gb_DENSITY,
+};
+
+/* Provide bit swizzling per DQS and byte swapping within a channel. */
+struct lpddr4_chan_swizzle_cfg {
+ uint8_t dqs[LP4_NUM_BYTE_LANES][DQ_BITS_PER_DQS];
+};
+
+struct lpddr4_swizzle_cfg {
+ struct lpddr4_chan_swizzle_cfg phys[LP4_NUM_PHYS_CHANNELS];
+};
+
+struct FSP_M_CONFIG;
+
+/*
+ * Initialize default LPDDR4 settings with provided speed. No logical channels
+ * are enabled. Subsequent calls to logical channel enabling are required.
+ */
+void meminit_lpddr4(struct FSP_M_CONFIG *cfg, int speed);
+
+/*
+ * Enable logical channel providing the full lpddr4_swizzle_config to
+ * fill in per channel swizzle definitions. This assumes a 64-bit wide
+ * memory width per logical channel -- i.e. 2 physical channels are configured
+ * to the memory reference code.
+ */
+void meminit_lpddr4_enable_channel(struct FSP_M_CONFIG *cfg, int logical_chan,
+ int device_density,
+ const struct lpddr4_swizzle_cfg *scfg);
+
+#endif /* _SOC_APOLLOLAKE_MEMINIT_H_ */
diff --git a/src/soc/intel/apollolake/meminit.c b/src/soc/intel/apollolake/meminit.c
new file mode 100644
index 0000000000..8b661c9568
--- /dev/null
+++ b/src/soc/intel/apollolake/meminit.c
@@ -0,0 +1,213 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <soc/meminit.h>
+#include <stddef.h> /* required for FspmUpd.h */
+#include <soc/fsp/FspmUpd.h>
+#include <string.h>
+
+static void set_lpddr4_defaults(struct FSP_M_CONFIG *cfg)
+{
+ /* Enable memory down BGA since it's the only LPDDR4 packaging. */
+ cfg->Package = 1;
+ cfg->MemoryDown = 1;
+
+ cfg->ScramblerSupport = 1;
+ cfg->ChannelHashMask = 0x36;
+ cfg->SliceHashMask = 0x9;
+ cfg->InterleavedMode = 2;
+ cfg->ChannelsSlicesEnable = 0;
+ cfg->MinRefRate2xEnable = 0;
+ cfg->DualRankSupportEnable = 1;
+ /* Don't enforce a memory size limit. */
+ cfg->MemorySizeLimit = 0;
+ /* Use a 2GiB I/O hole -- field is in MiB units. */
+ cfg->LowMemoryMaxValue = 2 * (GiB/MiB);
+ /* No restrictions on memory above 4GiB */
+ cfg->HighMemoryMaxValue = 0;
+
+ /* Always default to attempt to use saved training data. */
+ cfg->DisableFastBoot = 0;
+
+ /* LPDDR4 is memory down so no SPD addresses. */
+ cfg->DIMM0SPDAddress = 0;
+ cfg->DIMM1SPDAddress = 0;
+
+ /* Clear all the rank enables. */
+ cfg->Ch0_RankEnable = 0x0;
+ cfg->Ch1_RankEnable = 0x0;
+ cfg->Ch2_RankEnable = 0x0;
+ cfg->Ch3_RankEnable = 0x0;
+
+ /*
+ * Set the device width to x16 which is half a LPDDR4 module as that's
+ * what the reference code expects.
+ */
+ cfg->Ch0_DeviceWidth = 0x1;
+ cfg->Ch1_DeviceWidth = 0x1;
+ cfg->Ch2_DeviceWidth = 0x1;
+ cfg->Ch3_DeviceWidth = 0x1;
+
+ /*
+ * Enable bank hashing (bit 1) and rank interleaving (bit 0) with
+ * a 1KiB address mapping (bits 5:4).
+ */
+ cfg->Ch0_Option = 0x3;
+ cfg->Ch1_Option = 0x3;
+ cfg->Ch2_Option = 0x3;
+ cfg->Ch3_Option = 0x3;
+
+ /* Weak on-die termination. */
+ cfg->Ch0_OdtConfig = 0;
+ cfg->Ch1_OdtConfig = 0;
+ cfg->Ch2_OdtConfig = 0;
+ cfg->Ch3_OdtConfig = 0;
+}
+
+void meminit_lpddr4(struct FSP_M_CONFIG *cfg, int speed)
+{
+ uint8_t profile;
+
+ switch (speed) {
+ case LP4_SPEED_1600:
+ profile = 0x9;
+ break;
+ case LP4_SPEED_2133:
+ profile = 0xa;
+ break;
+ case LP4_SPEED_2400:
+ profile = 0xb;
+ break;
+ default:
+ printk(BIOS_WARNING, "Invalid LPDDR4 speed: %d\n", speed);
+ /* Set defaults. */
+ speed = LP4_SPEED_1600;
+ profile = 0x9;
+ }
+
+ printk(BIOS_INFO, "LP4DDR speed is %dMHz\n", speed);
+ cfg->Profile = profile;
+
+ set_lpddr4_defaults(cfg);
+}
+
+static void enable_logical_chan0(struct FSP_M_CONFIG *cfg, int device_density,
+ const struct lpddr4_swizzle_cfg *scfg)
+{
+ const struct lpddr4_chan_swizzle_cfg *chan;
+ /* Number of bytes to copy per DQS. */
+ const size_t sz = DQ_BITS_PER_DQS;
+
+ /*
+ * Logical channel 0 is comprised of physical channel 0 and 1.
+ * Physical channel 0 is comprised of the CH0_DQB signals.
+ * Physical channel 1 is comprised of the CH0_DQA signals.
+ */
+ cfg->Ch0_DramDensity = device_density;
+ cfg->Ch1_DramDensity = device_density;
+ /* Enable rank 0 on both channels. */
+ cfg->Ch0_RankEnable = 1;
+ cfg->Ch1_RankEnable = 1;
+
+ /*
+ * CH0_DQB byte lanes in the bit swizzle configuration field are
+ * not 1:1. The mapping within the swizzling field is:
+ * indicies [0:7] - byte lane 1 (DQS1) DQ[8:15]
+ * indicies [8:15] - byte lane 0 (DQS0) DQ[0:7]
+ * indicies [16:23] - byte lane 3 (DQS3) DQ[24:31]
+ * indicies [24:31] - byte lane 2 (DQS2) DQ[16:23]
+ */
+ chan = &scfg->phys[LP4_PHYS_CH0B];
+ memcpy(&cfg->Ch0_Bit_swizzling[0], &chan->dqs[LP4_DQS1], sz);
+ memcpy(&cfg->Ch0_Bit_swizzling[8], &chan->dqs[LP4_DQS0], sz);
+ memcpy(&cfg->Ch0_Bit_swizzling[16], &chan->dqs[LP4_DQS3], sz);
+ memcpy(&cfg->Ch0_Bit_swizzling[24], &chan->dqs[LP4_DQS2], sz);
+
+ /*
+ * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1.
+ */
+ chan = &scfg->phys[LP4_PHYS_CH0A];
+ memcpy(&cfg->Ch1_Bit_swizzling[0], &chan->dqs[LP4_DQS0], sz);
+ memcpy(&cfg->Ch1_Bit_swizzling[8], &chan->dqs[LP4_DQS1], sz);
+ memcpy(&cfg->Ch1_Bit_swizzling[16], &chan->dqs[LP4_DQS2], sz);
+ memcpy(&cfg->Ch1_Bit_swizzling[24], &chan->dqs[LP4_DQS3], sz);
+}
+
+static void enable_logical_chan1(struct FSP_M_CONFIG *cfg, int device_density,
+ const struct lpddr4_swizzle_cfg *scfg)
+{
+ const struct lpddr4_chan_swizzle_cfg *chan;
+ /* Number of bytes to copy per DQS. */
+ const size_t sz = DQ_BITS_PER_DQS;
+
+ /*
+ * Logical channel 1 is comprised of physical channel 2 and 3.
+ * Physical channel 2 is comprised of the CH1_DQB signals.
+ * Physical channel 3 is comprised of the CH1_DQA signals.
+ */
+ cfg->Ch2_DramDensity = device_density;
+ cfg->Ch3_DramDensity = device_density;
+ /* Enable rank 0 on both channels. */
+ cfg->Ch2_RankEnable = 1;
+ cfg->Ch3_RankEnable = 1;
+
+ /*
+ * CH1_DQB byte lanes in the bit swizzle configuration field are
+ * not 1:1. The mapping within the swizzling field is:
+ * indicies [0:7] - byte lane 1 (DQS1) DQ[8:15]
+ * indicies [8:15] - byte lane 0 (DQS0) DQ[0:7]
+ * indicies [16:23] - byte lane 3 (DQS3) DQ[24:31]
+ * indicies [24:31] - byte lane 2 (DQS2) DQ[16:23]
+ */
+ chan = &scfg->phys[LP4_PHYS_CH1B];
+ memcpy(&cfg->Ch2_Bit_swizzling[0], &chan->dqs[LP4_DQS1], sz);
+ memcpy(&cfg->Ch2_Bit_swizzling[8], &chan->dqs[LP4_DQS0], sz);
+ memcpy(&cfg->Ch2_Bit_swizzling[16], &chan->dqs[LP4_DQS3], sz);
+ memcpy(&cfg->Ch2_Bit_swizzling[24], &chan->dqs[LP4_DQS2], sz);
+
+ /*
+ * CH1_DQA byte lanes in the bit swizzle configuration field are 1:1.
+ */
+ chan = &scfg->phys[LP4_PHYS_CH1A];
+ memcpy(&cfg->Ch3_Bit_swizzling[0], &chan->dqs[LP4_DQS0], sz);
+ memcpy(&cfg->Ch3_Bit_swizzling[8], &chan->dqs[LP4_DQS1], sz);
+ memcpy(&cfg->Ch3_Bit_swizzling[16], &chan->dqs[LP4_DQS2], sz);
+ memcpy(&cfg->Ch3_Bit_swizzling[24], &chan->dqs[LP4_DQS3], sz);
+}
+
+void meminit_lpddr4_enable_channel(struct FSP_M_CONFIG *cfg, int logical_chan,
+ int device_density,
+ const struct lpddr4_swizzle_cfg *scfg)
+{
+ if (device_density < LP4_8Gb_DENSITY ||
+ device_density > LP4_16Gb_DENSITY) {
+ printk(BIOS_ERR, "Invalid LPDDR4 density: %d\n",
+ device_density);
+ return;
+ }
+
+ switch (logical_chan) {
+ case LP4_LCH0:
+ enable_logical_chan0(cfg, device_density, scfg);
+ break;
+ case LP4_LCH1:
+ enable_logical_chan1(cfg, device_density, scfg);
+ break;
+ default:
+ printk(BIOS_ERR, "Invalid logical channel: %d\n", logical_chan);
+ break;
+ }
+}