diff options
Diffstat (limited to 'src/northbridge')
| -rw-r--r-- | src/northbridge/intel/e7505/raminit.c | 18 |
1 files changed, 2 insertions, 16 deletions
diff --git a/src/northbridge/intel/e7505/raminit.c b/src/northbridge/intel/e7505/raminit.c index 517ba6f44c..72f630d2a3 100644 --- a/src/northbridge/intel/e7505/raminit.c +++ b/src/northbridge/intel/e7505/raminit.c @@ -48,11 +48,6 @@ Definitions: -----------------------------------------------------------------------------*/ -// Uncomment this to enable run-time checking of DIMM parameters -// for dual-channel operation -// Unfortunately the code seems to chew up several K of space. -//#define VALIDATE_DIMM_COMPATIBILITY - #if CONFIG(DEBUG_RAM_SETUP) #define RAM_DEBUG_MESSAGE(x) printk(BIOS_DEBUG, x) #define RAM_DEBUG_HEX32(x) printk(BIOS_DEBUG, "%08x", x) @@ -115,7 +110,6 @@ static const uint32_t refresh_rate_map[] = { #define MAX_SPD_REFRESH_RATE ((sizeof(refresh_rate_map) / sizeof(uint32_t)) - 1) -#ifdef VALIDATE_DIMM_COMPATIBILITY // SPD parameters that must match for dual-channel operation static const uint8_t dual_channel_parameters[] = { SPD_MEMORY_TYPE, @@ -126,7 +120,6 @@ static const uint8_t dual_channel_parameters[] = { SPD_PRIMARY_SDRAM_WIDTH, SPD_NUM_BANKS_PER_SDRAM }; -#endif /* VALIDATE_DIMM_COMPATIBILITY */ /* Comments here are remains of e7501 or even 855PM. * They might be partially (in)correct for e7505. @@ -465,8 +458,6 @@ static struct dimm_size spd_get_dimm_size(unsigned int dimm_socket_address) return sz; } -#ifdef VALIDATE_DIMM_COMPATIBILITY - /** * Determine whether two DIMMs have the same value for an SPD parameter. * @@ -490,7 +481,6 @@ static uint8_t are_spd_values_equal(uint8_t spd_byte_number, return bEqual; } -#endif /** * Scan for compatible DIMMs. @@ -527,10 +517,8 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) uint16_t channel0_dimm = ctrl->channel0[i]; uint16_t channel1_dimm = ctrl->channel1[i]; uint8_t bDualChannel = 1; -#ifdef VALIDATE_DIMM_COMPATIBILITY struct dimm_size page_size; struct dimm_size sdram_width; -#endif int spd_value; if (channel0_dimm == 0) @@ -540,7 +528,6 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) SPD_MEMORY_TYPE_SDRAM_DDR) continue; -#ifdef VALIDATE_DIMM_COMPATIBILITY if (smbus_read_byte(channel0_dimm, SPD_MODULE_VOLTAGE) != SPD_VOLTAGE_SSTL2) continue; // Unsupported voltage @@ -586,7 +573,7 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) && (sdram_width.side2 != 8)) continue; } -#endif + // Channel 0 DIMM looks compatible. // Now see if it is paired with the proper DIMM on channel 1. @@ -599,7 +586,7 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) printk(BIOS_DEBUG, "Skipping un-matched DIMMs - only dual-channel operation supported\n"); continue; } -#ifdef VALIDATE_DIMM_COMPATIBILITY + spd_value = smbus_read_byte(channel1_dimm, SPD_SUPPORTED_BURST_LENGTHS); if (!(spd_value & SPD_BURST_LENGTH_4) || (spd_value < 0)) @@ -615,7 +602,6 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) break; } } -#endif /* VALIDATE_DIMM_COMPATIBILITY */ if (bDualChannel) { // This DIMM pair is usable |