diff options
Diffstat (limited to 'src/northbridge/intel/sch/raminit.h')
| -rw-r--r-- | src/northbridge/intel/sch/raminit.h | 178 |
1 files changed, 0 insertions, 178 deletions
diff --git a/src/northbridge/intel/sch/raminit.h b/src/northbridge/intel/sch/raminit.h deleted file mode 100644 index 4a81ec1580..0000000000 --- a/src/northbridge/intel/sch/raminit.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009-2010 iWave Systems - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef RAMINIT_H -#define RAMINIT_H - -/** - * Bit Equates - **/ -#define BIT(x) (1<<x) - -#define EBP_TRP_MASK (BIT(1) | BIT(0)) -#define TRP_LOW 3h -#define TRP_HIGH 5h -#define EBP_TRP_OFFSET 0 /* Start of TRP field in EBP*/ -#define EBP_TRCD_MASK (BIT(3) | BIT(2)) -#define TRCD_LOW 3h -#define TRCD_HIGH 5h -#define EBP_TRCD_OFFSET 2 /* Start of TRCD field in EBP*/ -#define EBP_TCL_MASK (BIT(5) | BIT(4)) -#define TCL_LOW 3 /* Minimum supported CL*/ -#define TCL_HIGH 5 /* Maximum supported CL*/ -#define EBP_TCL_OFFSET 4 /* EBP bit( )for CL mask*/ -#define EBP_DDR2_CL_5_0 BIT(5) /* CL 5.0 = 10b*/ -#define EBP_DDR2_CL_4_0 BIT(4) /* CL 4.0 = 01b*/ -#define EBP_DDR2_CL_3_0 00h /* CL 3.0 = 00b*/ -#define EBP_FREQ_MASK (BIT(10)| BIT(9)) -#define EBP_FREQ_OFFSET 9 /* EBP bit( )for frequency mask*/ -#define EBP_FREQ_400 0 /* 400MHz EBP[10:9] = 00b*/ -#define EBP_FREQ_533 BIT(9) /* 533MHz EBP[10:9] = 01b*/ -#define EBP_REFRESH_MASK (BIT(12)| BIT(11)) -#define EBP_REFRESH_OFFSET 11 /* Bit offset of refresh field*/ -#define EBP_REF_DIS 00h /* Mask for refresh disabled*/ -#define EBP_REF_128CLK BIT(11) /* Mask for 128 clks referesh rate*/ -#define EBP_REF_3_9 BIT(12) /* Mask for 3.9us refresh rate*/ -#define EBP_REF_7_8 (BIT(12)| BIT(11))/* Mask for 7.8us refresh rate*/ -#define EBP_WIDTH_MASK BIT(15) -#define EBP_WIDTH_OFFSET 15 /* Bit offset of EBP width field*/ -#define EBP_SOCKET_X16 BIT(15) /* Bit mask of x8/x16 bit*/ -#define EBP_DENSITY_MASK (BIT(17)| BIT(16)) -#define EBP_DENSITY_OFFSET 16 -#define EBP_DENSITY_512 BIT(16) /* 512Mbit density*/ -#define EBP_DENSITY_1024 BIT(17) /* 1024Mbit density*/ -#define EBP_DENSITY_2048 (BIT(17)| BIT(16))/* 2048Mbit density*/ -#define EBP_RANKS_MASK BIT(18) -#define EBP_RANKS_OFFSET 18 -#define EBP_RANKS BIT(18) /* Bit offset of # of ranks bit*/ -#define EBP_PACKAGE_TYPE BIT(19) /* Package type (stacked or not)*/ -#define EBP_2X_MASK BIT(20) -#define EBP_2X_OFFSET 20 /* Bit offset of ebp 2x refresh field*/ -#define EBP_2X_AUTO_REFRESH BIT(20) /* Bit mask of 2x refresh field*/ -#define EBP_DRAM_PARM_MASK BIT(21) -#define EBP_DRAM_PARM_OFFSET 21 -#define EBP_DRAM_PARM_SPD 0 /* Use SPD to get DRAM parameters*/ -#define EBP_DRAM_PARM_CMC BIT(21) /* DRAM parameters in CMC binary*/ -#define EBP_BOOT_PATH BIT(31) - - - - -#define HB_REG_MCR 0xD0 /* Message Control Register */ -#define HB_REG_MCR_OP_OFFSET 24 /* Offset of the opcode field in MCR */ -#define HB_REG_MCR_PORT_OFFSET 16 /* Offset of the port field in MCR */ -#define HB_REG_MCR_REG_OFFSET 8 /* Offset of the register field in MCR */ -#define HB_REG_MDR 0xD4 /* Message Data Register */ - -/* SCH Message OpCodes and Attributes*/ -#define SCH_OPCODE_WAKEFULLON 0x2 /* SCH message bus "Wake Full On" opcode*/ -#define SCH_OPCODE_DRAMINIT 0xA0 /* SCH message bus "DRAM Init" opcode */ -#define SCH_DRAMINIT_CMD_MRS 0x4000 /* MRS command */ -#define SCH_DRAMINIT_CMD_EMRS1 0x8 /* EMRS 1 command */ -#define SCH_DRAMINIT_CMD_EMRS2 0x10 /* EMRS 2 command */ -#define SCH_DRAMINIT_CMD_EMRS3 0x18 /* EMRS 3 command */ -#define SCH_DRAMINIT_CMD_CBR 0x1 /* CBR command */ -#define SCH_DRAMINIT_CMD_AREF 0x10001 /* Refresh command, MA10=0->All */ -#define SCH_DRAMINIT_CMD_PALL 0x10002 /* Precharge command, MA10=1->All */ -#define SCH_DRAMINIT_CMD_BACT 0x3 /* Bank activate command */ -#define SCH_DRAMINIT_CMD_NOP 0x7 /* NOP command */ -#define SCH_DRAMINIT_RANK_OFFSET 21 /* Offset of the rank selection bit */ -#define SCH_DRAMINIT_RANK_MASK BIT(21) -#define SCH_DRAMINIT_ADDR_OFFSET 6 /* Offset of the address field in MDR */ -#define SCH_DRAMINIT_INTLV BIT(3) /* Interleave burst type */ -#define SCH_DRAMINIT_BL4 2 /* Burst Length = 4 */ -#define SCH_DRAMINIT_CL_OFFSET 4 /* CAS Latency bit offset */ -#define SCH_DRAMINIT_OCD_DEFAULT 0xE000 /* OCD Default command */ -#define SCH_DRAMINIT_DQS_DIS BIT(16) /* DQS Disable command */ -#define SCH_OPCODE_READ 0xD0 /* SCH message bus "read" opcode */ -#define SCH_OPCODE_WRITE 0xE0 /* SCH message bus "write" opcode */ - -/* SCH Message Ports and Registers*/ - -#define SCH_MSG_DUNIT_PORT 0x1 /* DRAM unit port */ -#define SCH_MSG_DUNIT_REG_DRP 0x0 /* DRAM Rank Population and Interface */ -#define DRP_FIELDS 0xFF /* Pertinent fields in DRP */ -#define DRP_RANK0_OFFSET 3 /* Rank 0 enable offset */ -#define DRP_RANK1_OFFSET 7 /* Rank 1 enable offset */ -#define DRP_DENSITY0_OFFSET 1 /* Density offset - Rank 0 */ -#define DRP_DENSITY1_OFFSET 5 /* Density offset - Rank 1 */ -#define DRP_WIDTH0_OFFSET 0 /* Width offset - Rank 0 */ -#define DRP_WIDTH1_OFFSET 4 /* Width offset - Rank 1 */ -#define DRP_CKE_DIS (BIT(14)| BIT(13)) /* CKE disable bits for both ranks */ -#define DRP_CKE_DIS0 BIT(13) /* CKE disable bit - Rank 0 */ -#define DRP_CKE_DIS1 BIT(14) /* CKE disable bit - Rank 1 */ -#define DRP_SCK_DIS (BIT(11)| BIT(10)) /* SCK/SCKB disable bits */ -#define DRP_SCK_DIS1 BIT(11) /* SCK[1]/SCKB[1] disable */ -#define DRP_SCK_DIS0 BIT(10) /* SCK[0]/SCKB[0] disable */ -#define SCH_MSG_DUNIT_REG_DTR 0x01 /* DRAM Timing Register */ -#define DTR_FIELDS 0x3F /* Pertinent fields in DTR */ -#define DTR_TCL_OFFSET 4 /* CAS latency offset */ -#define DTR_TRCD_OFFSET 2 /* RAS CAS Delay Offset */ -#define DTR_TRP_OFFSET 0 /* RAS Precharge Delay Offset */ -#define SCH_MSG_DUNIT_REG_DCO 0x2 /* DRAM Control Register */ -#define DCO_FIELDS 0xF /* Pertinent fields in DCO */ -#define DCO_REFRESH_OFFSET 2 /* Refresh Rate Field Offset */ -#define DCO_FREQ_OFFSET 0 /* DRAM Frequency Field Offset */ -#define DCO_IC BIT(7) /* Initialization complete bit */ -#define SCH_MSG_PUNIT_PORT 04h /* Punit Port */ -#define SCH_MSG_PUNIT_REG_PCR 71h /* Punit Control Register */ -#define SCH_MSG_TEST_PORT 05h /* Test port */ -#define SCH_MSG_TEST_REG_MSR 03h /* Mode and Status Register */ - - -/* Jedec initialization mapping into the MDR address field for DRAM init messages*/ - - -#define SCH_JEDEC_DLLRESET BIT(8) /* DLL Reset bit( ) */ -#define SCH_JEDEC_INTLV BIT(3) /* Interleave/NOT(Sequential) bit( ) */ -#define SCH_JEDEC_CL_OFFSET 4 /* Offset of the CAS latency field */ -#define SCH_JEDEC_OCD_DEFAULT (BIT(7)| BIT(8)| BIT(9)) /* OCD default value */ -#define SCH_JEDEC_DQS_DIS BIT(10) /* DQS disable bit */ -#define SCH_JEDEC_BL4 BIT(1) /* Burst length 4 value */ -/*static values used during JEDEC iniatialization. These values are not -dependent on memory or chipset configuration.*/ -#define JEDEC_STATIC_PARAM ((SCH_JEDEC_INTLV << SCH_DRAMINIT_ADDR_OFFSET) + (SCH_JEDEC_BL4 << SCH_DRAMINIT_ADDR_OFFSET)) - -#define DIMM_SOCKETS 2 - -#define DIMM_SPD_BASE 0x50 -#define DIMM_TCO_BASE 0x30 - -/* Burst length is always 8 */ -#define BURSTLENGTH 8 -#define RAM_PARAM_SOURCE_SOFTSTRAP 1 -#define RAM_PARAM_SOURCE_SPD 0 -struct sys_info { - - u16 memory_frequency; /* 400 or 533*/ - u16 fsb_frequency; /* 400 or 533*/ - - u8 trp; /*3,4,5 DRAM clocks */ - u8 trcd; /*3,4,5 DRAM clocks */ - u8 cl; /*CAS Latency 3,4,5*/ - - u8 refresh; /*Refresh rate disabled,128 DRAM clocks,3.9us,7.8us */ - - u8 data_width; /*x8/x16 data width */ - u8 device_density; /*SDRAM Device Density 512/1024/2048Mbit */ - u8 ranks; /*Single/Double */ - u8 ram_param_source; /*DRAM Parameter Source SPD/SoftStraps(R) Block (down memory) */ - u8 boot_path; - -} __attribute__ ((packed)); - -void sdram_initialize(int boot_mode); - -#endif /* RAMINIT_H */ |