diff options
Diffstat (limited to 'src/northbridge/intel/gm45')
-rw-r--r-- | src/northbridge/intel/gm45/gm45.h | 12 | ||||
-rw-r--r-- | src/northbridge/intel/gm45/raminit.c | 187 | ||||
-rw-r--r-- | src/northbridge/intel/gm45/raminit_receive_enable_calibration.c | 11 |
3 files changed, 156 insertions, 54 deletions
diff --git a/src/northbridge/intel/gm45/gm45.h b/src/northbridge/intel/gm45/gm45.h index c8ec6dc88d..f28c6d1495 100644 --- a/src/northbridge/intel/gm45/gm45.h +++ b/src/northbridge/intel/gm45/gm45.h @@ -76,6 +76,15 @@ typedef enum { /* as in DDR3 spd */ CHIP_CAP_16G = 6, } chip_capacity_t; +typedef enum { /* as in DDR2 spd */ + REFRESH_15_625 = 0, + REFRESH_3_9 = 1, + REFRESH_7_8 = 2, + REFRESH_31_25 = 3, + REFRESH_62_5 = 4, + REFRESH_125 = 5, +} refresh_rate_t; + typedef struct { unsigned int CAS; fsb_clock_t fsb_clock; @@ -97,6 +106,7 @@ typedef struct { 0xa - 0xf: raw card type A - F */ chip_width_t chip_width; chip_capacity_t chip_capacity; + refresh_rate_t refresh; unsigned int page_size; /* of whole DIMM in Bytes (4096 or 8192) */ unsigned int banks; unsigned int ranks; @@ -411,7 +421,7 @@ u32 raminit_get_rank_addr(unsigned int channel, unsigned int rank); void raminit_rcomp_calibration(stepping_t stepping); void raminit_reset_readwrite_pointers(void); -void raminit_receive_enable_calibration(const timings_t *, const dimminfo_t *); +void raminit_receive_enable_calibration(int ddr_type, const timings_t *, const dimminfo_t *); void raminit_write_training(const mem_clock_t, const dimminfo_t *, int s3resume); void raminit_read_training(const dimminfo_t *, int s3resume); diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c index 8a72d4afba..7c75bfe30f 100644 --- a/src/northbridge/intel/gm45/raminit.c +++ b/src/northbridge/intel/gm45/raminit.c @@ -349,6 +349,7 @@ typedef struct { unsigned int tWR; unsigned int page_size; unsigned int raw_card; + unsigned int refresh; } channel[2]; } spdinfo_t; /** @@ -434,6 +435,7 @@ static void collect_ddr2_dimm(struct spd_dimminfo *const di, const int smb_addr) di->tWR = smbus_read_byte(smb_addr, 36) << 6; /* given in 1/4ns */ di->raw_card = 0; /* Use same path as for DDR3 type A. */ + di->refresh = smbus_read_byte(smb_addr, 12); } /* * This function collects RAM characteristics from SPD, assuming that RAM @@ -490,6 +492,7 @@ static void collect_ddr3(sysinfo_t *const sysinfo, spdinfo_t *const config) config->channel[cur].tWR = smbus_read_byte(smb_addr, 17) * 32; config->channel[cur].raw_card = smbus_read_byte(smb_addr, 62) & 0x1f; + config->channel[cur].refresh = REFRESH_7_8; } cur++; mask >>= 2; @@ -785,6 +788,7 @@ static void collect_dimm_config(sysinfo_t *const sysinfo) FOR_EACH_CHANNEL(i) { sysinfo->dimms[i].card_type = (spdinfo.dimm_mask & (1 << (i * 2))) ? spdinfo.channel[i].raw_card + 0xa : 0; + sysinfo->dimms[i].refresh = spdinfo.channel[i].refresh; } /* Find common memory clock and CAS. */ @@ -817,9 +821,6 @@ static void collect_dimm_config(sysinfo_t *const sysinfo) sysinfo->selected_timings.channel_mode = CHANNEL_MODE_DUAL_INTERLEAVED; else sysinfo->selected_timings.channel_mode = CHANNEL_MODE_SINGLE; - - if (sysinfo->spd_type == DDR2) - die("DDR2 support not complete yet\n"); } static void reset_on_bad_warmboot(void) @@ -983,10 +984,10 @@ static void configure_dram_control_mode(const timings_t *const timings, const di cxdrc &= ~CxDRC0_RANKEN_MASK; FOR_EACH_POPULATED_RANK_IN_CHANNEL(dimms, ch, r) cxdrc |= CxDRC0_RANKEN(r); - cxdrc = (cxdrc & ~CxDRC0_RMS_MASK) | - /* Always 7.8us for DDR3: */ - /* FIXME DDR2: SPD+12? */ - CxDRC0_RMS_78US; + if (dimms[ch].refresh == REFRESH_3_9) + cxdrc = (cxdrc & ~CxDRC0_RMS_MASK) | CxDRC0_RMS_39US; + else + cxdrc = (cxdrc & ~CxDRC0_RMS_MASK) | CxDRC0_RMS_78US; mchbar_write32(mchbar, cxdrc); mchbar = CxDRC1_MCHBAR(ch); @@ -1009,30 +1010,41 @@ static void configure_dram_control_mode(const timings_t *const timings, const di } } -static void rcomp_initialization(const stepping_t stepping, const int sff) +static void rcomp_initialization(const int spd_type, const stepping_t stepping, const int sff) { /* Program RCOMP codes. */ if (sff) die("SFF platform unsupported in RCOMP initialization.\n"); - /* Values are for DDR3. */ - mchbar_clrbits8(0x6ac, 0x0f); - mchbar_write8(0x6b0, 0x55); - mchbar_clrbits8(0x6ec, 0x0f); - mchbar_write8(0x6f0, 0x66); - mchbar_clrbits8(0x72c, 0x0f); - mchbar_write8(0x730, 0x66); - mchbar_clrbits8(0x76c, 0x0f); - mchbar_write8(0x770, 0x66); - mchbar_clrbits8(0x7ac, 0x0f); - mchbar_write8(0x7b0, 0x66); - mchbar_clrbits8(0x7ec, 0x0f); - mchbar_write8(0x7f0, 0x66); - mchbar_clrbits8(0x86c, 0x0f); - mchbar_write8(0x870, 0x55); - mchbar_clrbits8(0x8ac, 0x0f); - mchbar_write8(0x8b0, 0x66); - /* ODT multiplier bits. */ - mchbar_clrsetbits32(0x04d0, 7 << 3 | 7 << 0, 2 << 3 | 2 << 0); + + if (spd_type == DDR2) { + unsigned int o; + for (o = 0; o <= 0x200; o += 0x40) { + mchbar_clrsetbits8(0x6ac + o, 0x0f, 0x0a); + mchbar_write8(0x6b0 + o, 0x55); + } + /* ODT multiplier bits. */ + mchbar_clrsetbits32(0x04d0, 7 << 3 | 7 << 0, 1 << 3 | 1 << 0); + } else { + /* Values are for DDR3. */ + mchbar_clrbits8(0x6ac, 0x0f); + mchbar_write8(0x6b0, 0x55); + mchbar_clrbits8(0x6ec, 0x0f); + mchbar_write8(0x6f0, 0x66); + mchbar_clrbits8(0x72c, 0x0f); + mchbar_write8(0x730, 0x66); + mchbar_clrbits8(0x76c, 0x0f); + mchbar_write8(0x770, 0x66); + mchbar_clrbits8(0x7ac, 0x0f); + mchbar_write8(0x7b0, 0x66); + mchbar_clrbits8(0x7ec, 0x0f); + mchbar_write8(0x7f0, 0x66); + mchbar_clrbits8(0x86c, 0x0f); + mchbar_write8(0x870, 0x55); + mchbar_clrbits8(0x8ac, 0x0f); + mchbar_write8(0x8b0, 0x66); + /* ODT multiplier bits. */ + mchbar_clrsetbits32(0x04d0, 7 << 3 | 7 << 0, 2 << 3 | 2 << 0); + } /* Perform RCOMP calibration for DDR3. */ raminit_rcomp_calibration(stepping); @@ -1057,44 +1069,64 @@ static void rcomp_initialization(const stepping_t stepping, const int sff) mchbar_setbits32(0x400, 1 << 1); } -static void dram_powerup(const int resume) +static void dram_powerup(const int spd_type, const int stepping, const int resume) { + u32 tmp; + udelay(200); - mchbar_clrsetbits32(CLKCFG_MCHBAR, 1 << 3, 3 << 21); - if (!resume) { + tmp = mchbar_read32(CLKCFG_MCHBAR); + tmp &= ~(3 << 21 | 1 << 3); + if (spd_type == DDR2 && stepping < STEPPING_B0) + tmp |= 2 << 21 | 1 << 3; + else + tmp |= 3 << 21; + mchbar_write32(CLKCFG_MCHBAR, tmp); + + if (spd_type == DDR3 && !resume) { mchbar_setbits32(0x1434, 1 << 10); udelay(1); } mchbar_setbits32(0x1434, 1 << 6); - if (!resume) { + if (spd_type == DDR3 && !resume) { udelay(1); mchbar_setbits32(0x1434, 1 << 9); mchbar_clrbits32(0x1434, 1 << 10); udelay(500); } } -static void dram_program_timings(const timings_t *const timings) + +static void dram_program_timings(const int spd_type, const timings_t *const timings) { /* Values are for DDR3. */ const int burst_length = 8; - const int tWTR = 4, tRTP = 1; + const int tWTR = (spd_type == DDR2) ? 3 : 4, tRTP = 1; int i; FOR_EACH_CHANNEL(i) { u32 reg = mchbar_read32(CxDRT0_MCHBAR(i)); const int btb_wtp = timings->tWL + burst_length/2 + timings->tWR; - const int btb_wtr = timings->tWL + burst_length/2 + tWTR; + const int btb_wtr = + ((spd_type == DDR2) ? timings->CAS - 1 : timings->tWL) + + burst_length/2 + tWTR; reg = (reg & ~(CxDRT0_BtB_WtP_MASK | CxDRT0_BtB_WtR_MASK)) | ((btb_wtp << CxDRT0_BtB_WtP_SHIFT) & CxDRT0_BtB_WtP_MASK) | ((btb_wtr << CxDRT0_BtB_WtR_SHIFT) & CxDRT0_BtB_WtR_MASK); - if (timings->mem_clock != MEM_CLOCK_1067MT) { + if (spd_type == DDR2) { + reg = (reg & ~(0x7 << 15)) | (2 << 15); + if (timings->mem_clock == MEM_CLOCK_667MT) + reg = (reg & ~(0xf << 10)) | (2 << 10); + else + reg = (reg & ~(0xf << 10)) | (3 << 10); + reg = (reg & ~(0x7 << 5)) | (3 << 5); + } else if (timings->mem_clock != MEM_CLOCK_1067MT) { reg = (reg & ~(0x7 << 15)) | ((9 - timings->CAS) << 15); reg = (reg & ~(0xf << 10)) | ((timings->CAS - 3) << 10); + reg = (reg & ~(0x7 << 5)) | (3 << 5); } else { reg = (reg & ~(0x7 << 15)) | ((10 - timings->CAS) << 15); reg = (reg & ~(0xf << 10)) | ((timings->CAS - 4) << 10); + reg = (reg & ~(0x7 << 5)) | (3 << 5); } - reg = (reg & ~(0x7 << 5)) | (3 << 5); reg = (reg & ~(0x7 << 0)) | (1 << 0); mchbar_write32(CxDRT0_MCHBAR(i), reg); @@ -1108,7 +1140,10 @@ static void dram_program_timings(const timings_t *const timings) reg = mchbar_read32(CxDRT2_MCHBAR(i)); reg = (reg & ~(0x1f << 17)) | ((timings->tFAW & 0x1f) << 17); - if (timings->mem_clock != MEM_CLOCK_1067MT) { + if (spd_type == DDR2) { + reg = (reg & ~(0x7 << 12)) | (0x1 << 12); + reg = (reg & ~(0xf << 6)) | (0x1 << 6); + } else if (timings->mem_clock != MEM_CLOCK_1067MT) { reg = (reg & ~(0x7 << 12)) | (0x2 << 12); reg = (reg & ~(0xf << 6)) | (0x9 << 6); } else { @@ -1119,7 +1154,10 @@ static void dram_program_timings(const timings_t *const timings) mchbar_write32(CxDRT2_MCHBAR(i), reg); reg = mchbar_read32(CxDRT3_MCHBAR(i)); - reg |= 0x3 << 28; + if (spd_type == DDR2) + reg &= ~(0x3 << 28); + else + reg |= (0x3 << 28); reg = (reg & ~(0x03 << 26)); reg = (reg & ~(0x07 << 23)) | (((timings->CAS - 3) & 0x07) << 23); reg = (reg & ~(0xff << 13)) | ((timings->tRFC & 0xff) << 13); @@ -1146,16 +1184,26 @@ static void dram_program_timings(const timings_t *const timings) if (timings->mem_clock == MEM_CLOCK_1067MT) reg = (reg & ~(0xf << 28)) | (0x8 << 28); reg = (reg & ~(0x00f << 22)) | ((burst_length/2 + timings->CAS + 2) << 22); - reg = (reg & ~(0x3ff << 12)) | (0x190 << 12); + if (spd_type == DDR2) { + if (timings->mem_clock == MEM_CLOCK_667MT) + reg = (reg & ~(0x1ff << 12)) | (0x21 << 12); + else + reg = (reg & ~(0x1ff << 12)) | (0x28 << 12); + } else { + reg = (reg & ~(0x1ff << 12)) | (0x190 << 12); + } reg = (reg & ~(0x00f << 4)) | ((timings->CAS - 2) << 4); reg = (reg & ~(0x003 << 2)) | (0x001 << 2); reg = (reg & ~(0x003 << 0)); mchbar_write32(CxDRT5_MCHBAR(i), reg); reg = mchbar_read32(CxDRT6_MCHBAR(i)); - /* FIXME DDR2: SPD+12? */ - reg = (reg & ~(0xffff << 16)) | (0x066a << 16); /* always 7.8us refresh rate for DDR3 */ - reg |= (1 << 2); + if (spd_type == DDR2) { + reg &= ~(1 << 2); + } else { + reg = (reg & ~(0xffff << 16)) | (0x066a << 16); /* always 7.8us refresh rate for DDR3 */ + reg |= (1 << 2); + } mchbar_write32(CxDRT6_MCHBAR(i), reg); } } @@ -1180,9 +1228,8 @@ static void dram_program_banks(const dimminfo_t *const dimms) } } -static void odt_setup(const timings_t *const timings, const int sff) +static void ddr3_odt_setup(const timings_t *const timings, const int sff) { - /* Values are for DDR3. */ int ch; FOR_EACH_CHANNEL(ch) { @@ -1224,6 +1271,45 @@ static void odt_setup(const timings_t *const timings, const int sff) } } +static void ddr2_odt_setup(const timings_t *const timings, const int sff) +{ + int ch; + + FOR_EACH_CHANNEL(ch) { + u32 reg = mchbar_read32(CxODT_HIGH(ch)); + if (sff && (timings->mem_clock == MEM_CLOCK_667MT)) + reg &= ~(0x3 << (61 - 32)); + else + reg |= 0x3 << (61 - 32); + reg = (reg & ~(0x3 << (52 - 32))) | (1 << (52 - 32)); + reg = (reg & ~(0x7 << (48 - 32))) | ((timings->CAS - 2) << (48 - 32)); + reg = (reg & ~(0xf << (44 - 32))) | (8 << (44 - 32)); + reg = (reg & ~(0xf << (40 - 32))) | (7 << (40 - 32)); + if (timings->mem_clock == MEM_CLOCK_667MT) { + reg = (reg & ~(0xf << (36 - 32))) | (4 << (36 - 32)); + reg = (reg & ~(0xf << (32 - 32))) | (4 << (32 - 32)); + } else { + reg = (reg & ~(0xf << (36 - 32))) | (5 << (36 - 32)); + reg = (reg & ~(0xf << (32 - 32))) | (5 << (32 - 32)); + } + mchbar_write32(CxODT_HIGH(ch), reg); + + reg = mchbar_read32(CxODT_LOW(ch)); + if (timings->mem_clock == MEM_CLOCK_667MT) + reg = (reg & ~(0x7 << 28)) | (2 << 28); + else + reg = (reg & ~(0x7 << 28)) | (3 << 28); + reg = (reg & ~(0x3 << 22)) | (1 << 22); + if (timings->mem_clock == MEM_CLOCK_667MT) + reg = (reg & ~(0x7 << 12)) | ((timings->tWL - 1) << 12); + else + reg = (reg & ~(0x7 << 12)) | ((timings->tWL - 2) << 12); + reg = (reg & ~(0x7 << 4)) | ((timings->tWL - 1) << 4); + reg = (reg & ~(0x7 << 0)); + mchbar_write32(CxODT_LOW(ch), reg); + } +} + static void misc_settings(const timings_t *const timings, const stepping_t stepping) { @@ -2055,12 +2141,12 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume) configure_dram_control_mode(timings, dimms); /* Initialize RCOMP. */ - rcomp_initialization(sysinfo->stepping, sysinfo->sff); + rcomp_initialization(sysinfo->spd_type, sysinfo->stepping, sysinfo->sff); /* Power-up DRAM. */ - dram_powerup(s3resume); + dram_powerup(sysinfo->spd_type, sysinfo->stepping, s3resume); /* Program DRAM timings. */ - dram_program_timings(timings); + dram_program_timings(sysinfo->spd_type, timings); /* Program number of banks. */ dram_program_banks(dimms); /* Enable DRAM clock pairs for populated DIMMs. */ @@ -2068,7 +2154,10 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume) mchbar_setbits32(CxDCLKDIS_MCHBAR(ch), CxDCLKDIS_ENABLE); /* Enable On-Die Termination. */ - odt_setup(timings, sysinfo->sff); + if (sysinfo->spd_type == DDR2) + ddr2_odt_setup(timings, sysinfo->sff); + else + ddr3_odt_setup(timings, sysinfo->sff); /* Miscellaneous settings. */ misc_settings(timings, sysinfo->stepping); /* Program clock crossing registers. */ @@ -2107,7 +2196,7 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume) ddr3_calibrate_zq(); /* Perform receive-enable calibration. */ - raminit_receive_enable_calibration(timings, dimms); + raminit_receive_enable_calibration(sysinfo->spd_type, timings, dimms); /* Lend clock values from receive-enable calibration. */ mchbar_clrsetbits32(CxDRT5_MCHBAR(0), 0xf0, (((mchbar_read32(CxDRT3_MCHBAR(0)) >> 7) - 1) & 0xf) << 4); diff --git a/src/northbridge/intel/gm45/raminit_receive_enable_calibration.c b/src/northbridge/intel/gm45/raminit_receive_enable_calibration.c index 6ca801337f..755839b46c 100644 --- a/src/northbridge/intel/gm45/raminit_receive_enable_calibration.c +++ b/src/northbridge/intel/gm45/raminit_receive_enable_calibration.c @@ -185,7 +185,8 @@ static void find_preamble(const int channel, const int group, } } -static void receive_enable_calibration(const timings_t *const timings, +static void receive_enable_calibration(const int ddr_type, + const timings_t *const timings, const dimminfo_t *const dimms) { /* Override group to byte-lane mapping for raw card type F DIMMS. */ @@ -200,7 +201,8 @@ static void receive_enable_calibration(const timings_t *const timings, }; const unsigned int t_bound = - (timings->mem_clock == MEM_CLOCK_1067MT) ? 9 : 12; + (timings->mem_clock == MEM_CLOCK_1067MT) ? 9 + : (ddr_type == DDR3) ? 12 : 15; const unsigned int p_bound = (timings->mem_clock == MEM_CLOCK_1067MT) ? 8 : 1; @@ -259,7 +261,8 @@ static void receive_enable_calibration(const timings_t *const timings, } } -void raminit_receive_enable_calibration(const timings_t *const timings, +void raminit_receive_enable_calibration(const int ddr_type, + const timings_t *const timings, const dimminfo_t *const dimms) { int ch; @@ -284,7 +287,7 @@ void raminit_receive_enable_calibration(const timings_t *const timings, mchbar_clrsetbits32(0x14f0, 3 << 9, 1 << 9); mchbar_clrsetbits32(0x15f0, 3 << 9, 1 << 9); - receive_enable_calibration(timings, dimms); + receive_enable_calibration(ddr_type, timings, dimms); mchbar_clrbits32(0x12a4, 1 << 31); mchbar_clrbits32(0x13a4, 1 << 31); |