diff options
Diffstat (limited to 'src/mainboard')
3 files changed, 202 insertions, 10 deletions
diff --git a/src/mainboard/google/dedede/variants/shotzo/Makefile.inc b/src/mainboard/google/dedede/variants/shotzo/Makefile.inc new file mode 100644 index 0000000000..eb2c9bc021 --- /dev/null +++ b/src/mainboard/google/dedede/variants/shotzo/Makefile.inc @@ -0,0 +1,3 @@ +## SPDX-License-Identifier: GPL-2.0-or-later + +ramstage-y += gpio.c diff --git a/src/mainboard/google/dedede/variants/shotzo/gpio.c b/src/mainboard/google/dedede/variants/shotzo/gpio.c new file mode 100644 index 0000000000..729f556d0e --- /dev/null +++ b/src/mainboard/google/dedede/variants/shotzo/gpio.c @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> + +/* Pad configuration in ramstage */ +static const struct pad_config gpio_table[] = { + /* A10 : LAN_PWR_ON */ + PAD_CFG_GPO(GPP_A10, 1, DEEP), + /* A11 : TOUCH_RPT_EN */ + PAD_NC(GPP_A11, NONE), + /* A12 : USB_OC1_N */ + PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1), + /* A13 : USB_OC2_N */ + PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), + /* A18 : USB_OC0_N */ + PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), + + /* B3 : TRACKPAD_INT_ODL */ + PAD_NC(GPP_B3, NONE), + + /* C16 : I2C0_SDA */ + PAD_NC(GPP_C16, NONE), + /* C17 : I2C0_SCL */ + PAD_NC(GPP_C17, NONE), + /* C18 : LVDS_SDA */ + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + /* C19 : LVDS_SCL */ + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + + /* D4 : TOUCH_INT_ODL */ + PAD_CFG_GPI_IRQ_WAKE(GPP_D4, NONE, PLTRST, LEVEL, INVERT), + /* D12 : WCAM_RST_L */ + PAD_NC(GPP_D12, NONE), + /* D15 : PD_EN_WEBCAM */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_D15, NONE, DEEP), + + /* E0 : CLK_24M_UCAM */ + PAD_NC(GPP_E0, NONE), + /* E2 : CLK_24M_WCAM */ + PAD_NC(GPP_E2, NONE), + + /* G0 : SD_CMD */ + PAD_NC(GPP_G0, NONE), + /* G1 : SD_DATA0 */ + PAD_NC(GPP_G1, NONE), + /* G2 : SD_DATA1 */ + PAD_NC(GPP_G2, NONE), + /* G3 : SD_DATA2 */ + PAD_NC(GPP_G3, NONE), + /* G4 : SD_DATA3 */ + PAD_NC(GPP_G4, NONE), + /* G5 : SD_CD_ODL */ + PAD_NC(GPP_G5, NONE), + /* G6 : SD_CLK */ + PAD_NC(GPP_G6, NONE), + /* G7 : SD_SDIO_WP */ + PAD_NC(GPP_G7, NONE), + + /* H1 : EN_PP3300_SD_U */ + PAD_NC(GPP_H1, NONE), + /* H6 : I2C3_SDA */ + PAD_NC(GPP_H6, NONE), + /* H7 : I2C3_SCL */ + PAD_NC(GPP_H7, NONE), +}; + +const struct pad_config *variant_override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} diff --git a/src/mainboard/google/dedede/variants/shotzo/overridetree.cb b/src/mainboard/google/dedede/variants/shotzo/overridetree.cb index 404024b1d6..4bbab783e1 100644 --- a/src/mainboard/google/dedede/variants/shotzo/overridetree.cb +++ b/src/mainboard/google/dedede/variants/shotzo/overridetree.cb @@ -8,10 +8,8 @@ chip soc/intel/jasperlake #| | required to set up a BAR | #| | for TPM communication | #| | before memory is up | - #| I2C0 | Trackpad | - #| I2C1 | Digitizer | + #| I2C1 | LVDS | #| I2C2 | Touchscreen | - #| I2C3 | Camera | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ @@ -19,24 +17,143 @@ chip soc/intel/jasperlake .speed_mhz = 1, .early_init = 1, }, - .i2c[0] = { - .speed = I2C_SPEED_FAST, - }, .i2c[1] = { .speed = I2C_SPEED_FAST, }, .i2c[2] = { .speed = I2C_SPEED_FAST, }, - .i2c[3] = { - .speed = I2C_SPEED_FAST, - }, .i2c[4] = { .speed = I2C_SPEED_FAST, }, }" + register "disable_external_bypass_vr" = "1" # Does not support external vnn power rail + + # USB Port Configuration + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Lan + device domain 0 on - device pci 15.0 on end + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A2"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A0"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A1"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(2, 3)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A3"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(2, 4)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.5 on end + end + chip drivers/usb/acpi + register "desc" = ""LAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.6 on end + end + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H19)" + device usb 2.7 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""LAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A0"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A1"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 3.3 on end + end + end + end + end # USB xHCI + device pci 15.0 off end # I2C 0 + device pci 15.2 on + chip drivers/i2c/hid + register "generic.hid" = ""ILTK0001"" + register "generic.desc" = ""ILITEK Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)" + register "generic.reset_delay_ms" = "20" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" + register "generic.enable_delay_ms" = "12" + register "generic.wake" = "GPE0_DW2_04" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 41 on end + end + end # I2C 2 + device pci 15.3 off end #I2C 3 + device pci 1c.7 on + chip drivers/wifi/generic + register "wake" = "GPE0_DW2_03" + device pci 00.0 on end + end + end # PCI Express Root Port 8 - WLAN + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""RTL5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C 4 + device pci 1f.3 on + chip drivers/generic/alc1015 + register "hid" = ""RTL1019"" + register "sdb" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)" + device generic 0 on end + end + end # Intel HDA end end |