diff options
Diffstat (limited to 'src/mainboard/google/slippy/devicetree.cb')
| -rw-r--r-- | src/mainboard/google/slippy/devicetree.cb | 116 |
1 files changed, 0 insertions, 116 deletions
diff --git a/src/mainboard/google/slippy/devicetree.cb b/src/mainboard/google/slippy/devicetree.cb deleted file mode 100644 index 3d4c8c5068..0000000000 --- a/src/mainboard/google/slippy/devicetree.cb +++ /dev/null @@ -1,116 +0,0 @@ -chip northbridge/intel/haswell - # IGD Displays - register "gfx.ndid" = "3" - register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" - - # Enable eDP Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Disable DisplayPort C Hotplug - register "gpu_dp_c_hotplug" = "0x00" - - # Enable HDMI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - # Set backlight PWM values for eDP - register "gpu_cpu_backlight" = "0x00000200" - register "gpu_pch_backlight" = "0x04000000" - - # Enable Panel and configure power delays - register "gpu_panel_port_select" = "1" # eDP - register "gpu_panel_power_cycle_delay" = "5" # 400ms - register "gpu_panel_power_up_delay" = "400" # 40ms - register "gpu_panel_power_down_delay" = "150" # 15ms - register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms - register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms - - device cpu_cluster 0 on - chip cpu/intel/haswell - device lapic 0 on end - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) - register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S) - - register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) - register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - device pci 03.0 on end # mini-hd audio - - chip southbridge/intel/lynxpoint - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # EC range is 0x800-0x9ff - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x00fc0901" - - # EC_SMI is GPIO34 - register "alt_gp_smi_en" = "0x0004" - register "gpe0_en_1" = "0x00000000" - # EC_SCI is GPIO36 - register "gpe0_en_2" = "0x00000010" - register "gpe0_en_3" = "0x00000000" - register "gpe0_en_4" = "0x00000000" - - register "ide_legacy_combined" = "0x0" - register "sata_ahci" = "0x1" - register "sata_port_map" = "0x1" - - register "sio_acpi_mode" = "0" - register "sio_i2c0_voltage" = "0" # 3.3V - register "sio_i2c1_voltage" = "0" # 3.3V - - device pci 13.0 off end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 on end # Serial I/O DMA - device pci 15.1 on end # I2C0 - device pci 15.2 on end # I2C1 - device pci 15.3 off end # GSPI0 - device pci 15.4 off end # GSPI1 - device pci 15.5 off end # UART0 - device pci 15.6 off end # UART1 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 17.0 off end # SDIO - device pci 19.0 off end # GbE - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 off end # PCIe Port #3 - device pci 1c.3 off end # PCIe Port #4 - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1d.0 on end # USB2 EHCI - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller - device pci 1f.3 on end # SMBus - device pci 1f.6 on end # Thermal - end - end -end |