diff options
Diffstat (limited to 'src/mainboard/asus')
| -rw-r--r-- | src/mainboard/asus/kgpe-d16/romstage.c | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/src/mainboard/asus/kgpe-d16/romstage.c b/src/mainboard/asus/kgpe-d16/romstage.c index bfa40427e4..1b586fd369 100644 --- a/src/mainboard/asus/kgpe-d16/romstage.c +++ b/src/mainboard/asus/kgpe-d16/romstage.c @@ -87,6 +87,76 @@ static void switch_spd_mux(uint8_t channel) byte &= ~0xc0; /* Enable SPD mux GPIO output drivers */ byte |= (channel << 2) & 0xc; /* Set SPD mux GPIOs */ pci_write_config8(PCI_DEV(0, 0x14, 0), 0x54, byte); + + /* Temporary AST PCI mapping */ + const uint32_t memory_base = 0xfc000000; + const uint32_t memory_limit = 0xfc800000; + +#define TEMP_PCI_BUS 0x2 + /* Save S100 PCI bridge settings */ + uint16_t prev_sec_cfg = pci_read_config16(PCI_DEV(0, 0x14, 4), + PCI_COMMAND); + uint8_t prev_sec_bus = pci_read_config8(PCI_DEV(0, 0x14, 4), + PCI_SECONDARY_BUS); + uint8_t prev_sec_sub_bus = pci_read_config8(PCI_DEV(0, 0x14, 4), + PCI_SUBORDINATE_BUS); + uint16_t prev_sec_mem_base = pci_read_config16(PCI_DEV(0, 0x14, 4), + PCI_MEMORY_BASE); + uint16_t prev_sec_mem_limit = pci_read_config16(PCI_DEV(0, 0x14, 4), + PCI_MEMORY_LIMIT); + /* Temporarily enable the SP5100 PCI bridge */ + pci_write_config8(PCI_DEV(0, 0x14, 4), PCI_SECONDARY_BUS, TEMP_PCI_BUS); + pci_write_config8(PCI_DEV(0, 0x14, 4), PCI_SUBORDINATE_BUS, 0xff); + pci_write_config16(PCI_DEV(0, 0x14, 4), PCI_MEMORY_BASE, + (memory_base >> 20)); + pci_write_config16(PCI_DEV(0, 0x14, 4), PCI_MEMORY_LIMIT, + (memory_limit >> 20)); + pci_write_config16(PCI_DEV(0, 0x14, 4), PCI_COMMAND, + PCI_COMMAND_MEMORY); + + /* Temporarily enable AST BAR1 */ + uint16_t prev_ast_cmd = pci_read_config16(PCI_DEV(TEMP_PCI_BUS, 0x1, 0), + PCI_COMMAND); + uint16_t prev_ast_sts = pci_read_config16(PCI_DEV(TEMP_PCI_BUS, 0x1, 0), + PCI_STATUS); + uint32_t prev_ast_bar1 = pci_read_config32( + PCI_DEV(TEMP_PCI_BUS, 0x1, 0), PCI_BASE_ADDRESS_1); + pci_write_config32(PCI_DEV(TEMP_PCI_BUS, 0x1, 0), PCI_BASE_ADDRESS_1, + memory_base); + pci_write_config16(PCI_DEV(TEMP_PCI_BUS, 0x1, 0), PCI_COMMAND, + PCI_COMMAND_MEMORY); + pci_write_config16(PCI_DEV(TEMP_PCI_BUS, 0x1, 0), PCI_STATUS, + PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_MEDIUM); + + /* Use the P2A bridge to set ASpeed SPD mux GPIOs to the same values as the SP5100 */ + void* ast_bar1 = (void*)memory_base; + /* Enable access to GPIO controller */ + write32(ast_bar1 + 0xf004, 0x1e780000); + write32(ast_bar1 + 0xf000, 0x1); + /* Enable SPD mux GPIO output drivers */ + write32(ast_bar1 + 0x10024, read32(ast_bar1 + 0x10024) | 0x3000); + /* Set SPD mux GPIOs */ + write32(ast_bar1 + 0x10020, (read32(ast_bar1 + 0x10020) & ~0x3000) + | ((channel & 0x3) << 12)); + write32(ast_bar1 + 0xf000, 0x0); + + /* Deconfigure AST BAR1 */ + pci_write_config16(PCI_DEV(TEMP_PCI_BUS, 0x1, 0), PCI_COMMAND, + prev_ast_cmd); + pci_write_config16(PCI_DEV(TEMP_PCI_BUS, 0x1, 0), PCI_STATUS, + prev_ast_sts); + pci_write_config32(PCI_DEV(TEMP_PCI_BUS, 0x1, 0), PCI_BASE_ADDRESS_1, + prev_ast_bar1); + + /* Deconfigure SP5100 PCI bridge */ + pci_write_config16(PCI_DEV(0, 0x14, 4), PCI_COMMAND, prev_sec_cfg); + pci_write_config16(PCI_DEV(0, 0x14, 4), PCI_MEMORY_LIMIT, + prev_sec_mem_limit); + pci_write_config16(PCI_DEV(0, 0x14, 4), PCI_MEMORY_BASE, + prev_sec_mem_base); + pci_write_config8(PCI_DEV(0, 0x14, 4), PCI_SUBORDINATE_BUS, + prev_sec_sub_bus); + pci_write_config8(PCI_DEV(0, 0x14, 4), PCI_SECONDARY_BUS, prev_sec_bus); } static const uint8_t spd_addr_fam15[] = { |