diff options
Diffstat (limited to 'src/ec/google')
-rw-r--r-- | src/ec/google/chromeec/acpi/ec.asl | 7 | ||||
-rw-r--r-- | src/ec/google/chromeec/acpi/superio.asl | 14 | ||||
-rw-r--r-- | src/ec/google/chromeec/ec_commands.h | 576 | ||||
-rw-r--r-- | src/ec/google/chromeec/ec_lpc.c | 50 |
4 files changed, 523 insertions, 124 deletions
diff --git a/src/ec/google/chromeec/acpi/ec.asl b/src/ec/google/chromeec/acpi/ec.asl index cb196a7065..24519c272f 100644 --- a/src/ec/google/chromeec/acpi/ec.asl +++ b/src/ec/google/chromeec/acpi/ec.asl @@ -29,9 +29,10 @@ Device (EC0) Name (_UID, 1) Name (_GPE, EC_SCI_GPI) Name (TOFS, EC_TEMP_SENSOR_OFFSET) - Name (TNOP, 0xFD) // Thermal sensor has no power - Name (TBAD, 0xFE) // Thermal sensor bad reading - Name (TNPR, 0xFF) // Thermal sensor not present + Name (TNCA, EC_TEMP_SENSOR_NOT_CALIBRATED) + Name (TNOP, EC_TEMP_SENSOR_NOT_POWERED) + Name (TBAD, EC_TEMP_SENSOR_ERROR) + Name (TNPR, EC_TEMP_SENSOR_NOT_PRESENT) Name (DWRN, 15) // Battery capacity warning at 15% Name (DLOW, 10) // Battery capacity low at 10% diff --git a/src/ec/google/chromeec/acpi/superio.asl b/src/ec/google/chromeec/acpi/superio.asl index 56f0f185c6..4f7133288a 100644 --- a/src/ec/google/chromeec/acpi/superio.asl +++ b/src/ec/google/chromeec/acpi/superio.asl @@ -29,8 +29,8 @@ * SIO_EC_HOST_ENABLE : Enable EC host command interface resources * EC_LPC_ADDR_HOST_DATA : EC host command interface data port * EC_LPC_ADDR_HOST_CMD : EC host command interface command port - * EC_LPC_ADDR_OLD_PARAM : EC host command parameter range base (old) - * EC_OLD_PARAM_SIZE : Parameter buffer size (old) + * EC_LPC_ADDR_HOST_ARGS : EC host command arguments + * EC_LPC_ADDR_HOST_PARAM : EC host command parameter buffer */ // Scope is \_SB.PCI0.LPCB @@ -75,8 +75,9 @@ Device (SIO) { { FixedIO (EC_LPC_ADDR_HOST_DATA, 1) FixedIO (EC_LPC_ADDR_HOST_CMD, 1) - FixedIO (EC_LPC_ADDR_OLD_PARAM, - EC_OLD_PARAM_SIZE) + FixedIO (EC_LPC_ADDR_HOST_ARGS, 4) + FixedIO (EC_LPC_ADDR_HOST_PARAM, + EC_HOST_PARAM_SIZE) }) Name (_PRS, ResourceTemplate () @@ -84,8 +85,9 @@ Device (SIO) { StartDependentFn (0, 0) { FixedIO (EC_LPC_ADDR_HOST_DATA, 1) FixedIO (EC_LPC_ADDR_HOST_CMD, 1) - FixedIO (EC_LPC_ADDR_OLD_PARAM, - EC_OLD_PARAM_SIZE) + FixedIO (EC_LPC_ADDR_HOST_ARGS, 4) + FixedIO (EC_LPC_ADDR_HOST_PARAM, + EC_HOST_PARAM_SIZE) } EndDependentFn () }) diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h index 10a74022af..952615d768 100644 --- a/src/ec/google/chromeec/ec_commands.h +++ b/src/ec/google/chromeec/ec_commands.h @@ -1,4 +1,4 @@ -/* Copyright (c) 2012 The Chromium OS Authors. All rights reserved. +/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -46,10 +46,6 @@ #define EC_LPC_ADDR_HOST_PARAM 0x804 #define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */ -/* I/O addresses for host command params, old interface */ -#define EC_LPC_ADDR_OLD_PARAM 0x880 -#define EC_OLD_PARAM_SIZE 0x080 /* Size of param area in bytes */ - /* EC command register bit functions */ #define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */ #define EC_LPC_CMDR_PENDING (1 << 1) /* Write pending to EC */ @@ -96,10 +92,11 @@ * * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. */ -#define EC_TEMP_SENSOR_B_ENTRIES 8 -#define EC_TEMP_SENSOR_NOT_PRESENT 0xff -#define EC_TEMP_SENSOR_ERROR 0xfe -#define EC_TEMP_SENSOR_NOT_POWERED 0xfd +#define EC_TEMP_SENSOR_B_ENTRIES 8 +#define EC_TEMP_SENSOR_NOT_PRESENT 0xff +#define EC_TEMP_SENSOR_ERROR 0xfe +#define EC_TEMP_SENSOR_NOT_POWERED 0xfd +#define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc /* * The offset of temperature value stored in mapped memory. This allows * reporting a temperature range of 200K to 454K = -73C to 181C. @@ -121,8 +118,8 @@ #define EC_SWITCH_LID_OPEN 0x01 #define EC_SWITCH_POWER_BUTTON_PRESSED 0x02 #define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04 -/* Recovery requested via keyboard */ -#define EC_SWITCH_KEYBOARD_RECOVERY 0x08 +/* Was recovery requested via keyboard; now unused. */ +#define EC_SWITCH_IGNORE1 0x08 /* Recovery requested via dedicated signal (from servo board) */ #define EC_SWITCH_DEDICATED_RECOVERY 0x10 /* Was fake developer mode switch; now unused. Remove in next refactor. */ @@ -135,6 +132,7 @@ /* Wireless switch flags */ #define EC_WIRELESS_SWITCH_WLAN 0x01 #define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 +#define EC_WIRELESS_SWITCH_WWAN 0x04 /* * This header file is used in coreboot both in C and ACPI code. The ACPI code @@ -186,6 +184,10 @@ enum ec_status { EC_RES_INVALID_RESPONSE = 5, EC_RES_INVALID_VERSION = 6, EC_RES_INVALID_CHECKSUM = 7, + EC_RES_IN_PROGRESS = 8, /* Accepted, command in progress */ + EC_RES_UNAVAILABLE = 9, /* No response available */ + EC_RES_TIMEOUT = 10, /* We got a timeout */ + EC_RES_OVERFLOW = 11, /* Table / data overflow */ }; /* @@ -388,6 +390,25 @@ struct ec_response_get_cmd_versions { uint32_t version_mask; } __packed; +/* + * Check EC communcations status (busy). This is needed on i2c/spi but not + * on lpc since it has its own out-of-band busy indicator. + * + * lpc must read the status from the command register. Attempting this on + * lpc will overwrite the args/parameter space and corrupt its data. + */ +#define EC_CMD_GET_COMMS_STATUS 0x09 + +/* Avoid using ec_status which is for return values */ +enum ec_comms_status { + EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */ +}; + +struct ec_response_get_comms_status { + uint32_t flags; /* Mask of enum ec_comms_status */ +} __packed; + + /*****************************************************************************/ /* Flash commands */ @@ -468,8 +489,8 @@ struct ec_params_flash_erase { * be changed. */ #define EC_FLASH_PROTECT_RO_NOW (1 << 1) -/* RW flash code protected now, until reboot. */ -#define EC_FLASH_PROTECT_RW_NOW (1 << 2) +/* Entire flash code protected now, until reboot. */ +#define EC_FLASH_PROTECT_ALL_NOW (1 << 2) /* Flash write protect GPIO is asserted now */ #define EC_FLASH_PROTECT_GPIO_ASSERTED (1 << 3) /* Error - at least one bank of flash is stuck locked, and cannot be unlocked */ @@ -480,8 +501,8 @@ struct ec_params_flash_erase { * re-requesting the desired flags, or by a hard reset if that fails. */ #define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5) -/* RW flash code protected when the EC boots */ -#define EC_FLASH_PROTECT_RW_AT_BOOT (1 << 6) +/* Entile flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6) struct ec_params_flash_protect { uint32_t mask; /* Bits in flags to apply */ @@ -531,6 +552,24 @@ struct ec_response_flash_region_info { uint32_t size; } __packed; +/* Read/write VbNvContext */ +#define EC_CMD_VBNV_CONTEXT 0x17 +#define EC_VER_VBNV_CONTEXT 1 +#define EC_VBNV_BLOCK_SIZE 16 + +enum ec_vbnvcontext_op { + EC_VBNV_CONTEXT_OP_READ, + EC_VBNV_CONTEXT_OP_WRITE, +}; + +struct ec_params_vbnvcontext { + uint32_t op; + uint8_t block[EC_VBNV_BLOCK_SIZE]; +} __packed; + +struct ec_response_vbnvcontext { + uint8_t block[EC_VBNV_BLOCK_SIZE]; +} __packed; /*****************************************************************************/ /* PWM commands */ @@ -573,52 +612,131 @@ struct ec_params_pwm_set_fan_duty { /*****************************************************************************/ /* - * Lightbar commands. This looks worse than it is. Since we only use one LPC + * Lightbar commands. This looks worse than it is. Since we only use one HOST * command to say "talk to the lightbar", we put the "and tell it to do X" part * into a subcommand. We'll make separate structs for subcommands with * different input args, so that we know how much to expect. */ #define EC_CMD_LIGHTBAR_CMD 0x28 -struct ec_params_lightbar_cmd { +struct rgb_s { + uint8_t r, g, b; +}; + +#define LB_BATTERY_LEVELS 4 +/* List of tweakable parameters. NOTE: It's __packed so it can be sent in a + * host command, but the alignment is the same regardless. Keep it that way. + */ +struct lightbar_params { + /* Timing */ + int google_ramp_up; + int google_ramp_down; + int s3s0_ramp_up; + int s0_tick_delay[2]; /* AC=0/1 */ + int s0a_tick_delay[2]; /* AC=0/1 */ + int s0s3_ramp_down; + int s3_sleep_for; + int s3_ramp_up; + int s3_ramp_down; + + /* Oscillation */ + uint8_t new_s0; + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ + + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ + + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; + + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +} __packed; + +struct ec_params_lightbar { + uint8_t cmd; /* Command (see enum lightbar_command) */ union { - union { - uint8_t cmd; - struct { - uint8_t cmd; - } dump, off, on, init, get_seq; - struct num { - uint8_t cmd; - uint8_t num; - } brightness, seq; - - struct reg { - uint8_t cmd; - uint8_t ctrl, reg, value; - } reg; - struct rgb { - uint8_t cmd; - uint8_t led, red, green, blue; - } rgb; - } in; - union { - struct dump { - struct { - uint8_t reg; - uint8_t ic0; - uint8_t ic1; - } vals[23]; - } dump; - struct get_seq { - uint8_t num; - } get_seq; + struct { + /* no args */ + } dump, off, on, init, get_seq, get_params; + + struct num { + uint8_t num; + } brightness, seq, demo; + + struct reg { + uint8_t ctrl, reg, value; + } reg; + + struct rgb { + uint8_t led, red, green, blue; + } rgb; + + struct lightbar_params set_params; + }; +} __packed; + +struct ec_response_lightbar { + union { + struct dump { struct { - /* no return params */ - } off, on, init, brightness, seq, reg, rgb; - } out; + uint8_t reg; + uint8_t ic0; + uint8_t ic1; + } vals[23]; + } dump; + + struct get_seq { + uint8_t num; + } get_seq; + + struct lightbar_params get_params; + + struct { + /* no return params */ + } off, on, init, brightness, seq, reg, rgb, demo, set_params; }; } __packed; +/* Lightbar commands */ +enum lightbar_command { + LIGHTBAR_CMD_DUMP = 0, + LIGHTBAR_CMD_OFF = 1, + LIGHTBAR_CMD_ON = 2, + LIGHTBAR_CMD_INIT = 3, + LIGHTBAR_CMD_BRIGHTNESS = 4, + LIGHTBAR_CMD_SEQ = 5, + LIGHTBAR_CMD_REG = 6, + LIGHTBAR_CMD_RGB = 7, + LIGHTBAR_CMD_GET_SEQ = 8, + LIGHTBAR_CMD_DEMO = 9, + LIGHTBAR_CMD_GET_PARAMS = 10, + LIGHTBAR_CMD_SET_PARAMS = 11, + LIGHTBAR_NUM_CMDS +}; + +/*****************************************************************************/ +/* LED control commands */ + +#define EC_CMD_LED_SET 0x29 + +#define EC_LED_FLAGS_AUTO (1 << 1) + +struct ec_params_led_set { + uint8_t r; + uint8_t g; + uint8_t b; /* Used as yellow if there is no blue LED */ + uint8_t flags; +} __packed; + /*****************************************************************************/ /* Verified boot commands */ @@ -651,22 +769,30 @@ struct ec_response_vboot_hash { } __packed; enum ec_vboot_hash_cmd { - EC_VBOOT_HASH_GET, /* Get current hash status */ - EC_VBOOT_HASH_ABORT, /* Abort calculating current hash */ - EC_VBOOT_HASH_START, /* Start computing a new hash */ - EC_VBOOT_HASH_RECALC, /* Synchronously compute a new hash */ + EC_VBOOT_HASH_GET = 0, /* Get current hash status */ + EC_VBOOT_HASH_ABORT = 1, /* Abort calculating current hash */ + EC_VBOOT_HASH_START = 2, /* Start computing a new hash */ + EC_VBOOT_HASH_RECALC = 3, /* Synchronously compute a new hash */ }; enum ec_vboot_hash_type { - EC_VBOOT_HASH_TYPE_SHA256, /* SHA-256 */ + EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */ }; enum ec_vboot_hash_status { - EC_VBOOT_HASH_STATUS_NONE, /* No hash (not started, or aborted) */ - EC_VBOOT_HASH_STATUS_DONE, /* Finished computing a hash */ - EC_VBOOT_HASH_STATUS_BUSY, /* Busy computing a hash */ + EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */ + EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */ + EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */ }; +/* + * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC. + * If one of these is specified, the EC will automatically update offset and + * size to the correct values for the specified image (RO or RW). + */ +#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe +#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd + /*****************************************************************************/ /* USB charging control commands */ @@ -772,6 +898,32 @@ struct ec_response_thermal_get_threshold { /* Toggle automatic fan control */ #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 +/* Get TMP006 calibration data */ +#define EC_CMD_TMP006_GET_CALIBRATION 0x53 + +struct ec_params_tmp006_get_calibration { + uint8_t index; +} __packed; + +struct ec_response_tmp006_get_calibration { + float s0; + float b0; + float b1; + float b2; +} __packed; + +/* Set TMP006 calibration data */ +#define EC_CMD_TMP006_SET_CALIBRATION 0x54 + +struct ec_params_tmp006_set_calibration { + uint8_t index; + uint8_t reserved[3]; /* Reserved; set 0 */ + float s0; + float b0; + float b1; + float b2; +} __packed; + /*****************************************************************************/ /* MKBP - Matrix KeyBoard Protocol */ @@ -801,6 +953,112 @@ struct ec_params_mkbp_simulate_key { uint8_t pressed; } __packed; +/* Configure keyboard scanning */ +#define EC_CMD_MKBP_SET_CONFIG 0x64 +#define EC_CMD_MKBP_GET_CONFIG 0x65 + +/* flags */ +enum mkbp_config_flags { + EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */ +}; + +enum mkbp_config_valid { + EC_MKBP_VALID_SCAN_PERIOD = 1 << 0, + EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1, + EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3, + EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4, + EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5, + EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6, + EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7, +}; + +/* Configuration for our key scanning algorithm */ +struct ec_mkbp_config { + uint32_t valid_mask; /* valid fields */ + uint8_t flags; /* some flags (enum mkbp_config_flags) */ + uint8_t valid_flags; /* which flags are valid */ + uint16_t scan_period_us; /* period between start of scans */ + /* revert to interrupt mode after no activity for this long */ + uint32_t poll_timeout_us; + /* + * minimum post-scan relax time. Once we finish a scan we check + * the time until we are due to start the next one. If this time is + * shorter this field, we use this instead. + */ + uint16_t min_post_scan_delay_us; + /* delay between setting up output and waiting for it to settle */ + uint16_t output_settle_us; + uint16_t debounce_down_us; /* time for debounce on key down */ + uint16_t debounce_up_us; /* time for debounce on key up */ + /* maximum depth to allow for fifo (0 = no keyscan output) */ + uint8_t fifo_max_depth; +} __packed; + +struct ec_params_mkbp_set_config { + struct ec_mkbp_config config; +} __packed; + +struct ec_response_mkbp_get_config { + struct ec_mkbp_config config; +} __packed; + +/* Run the key scan emulation */ +#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66 + +enum ec_keyscan_seq_cmd { + EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */ + EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */ + EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */ + EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */ + EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */ +}; + +enum ec_collect_flags { + /* + * Indicates this scan was processed by the EC. Due to timing, some + * scans may be skipped. + */ + EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0, +}; + +struct ec_collect_item { + uint8_t flags; /* some flags (enum ec_collect_flags) */ +}; + +struct ec_params_keyscan_seq_ctrl { + uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */ + union { + struct { + uint8_t active; /* still active */ + uint8_t num_items; /* number of items */ + /* Current item being presented */ + uint8_t cur_item; + } status; + struct { + /* + * Absolute time for this scan, measured from the + * start of the sequence. + */ + uint32_t time_us; + uint8_t scan[0]; /* keyscan data */ + } add; + struct { + uint8_t start_item; /* First item to return */ + uint8_t num_items; /* Number of items to return */ + } collect; + }; +} __packed; + +struct ec_result_keyscan_seq_ctrl { + union { + struct { + uint8_t num_items; /* Number of items */ + /* Data for each item */ + struct ec_collect_item item[0]; + } collect; + }; +} __packed; + /*****************************************************************************/ /* Temperature sensor commands */ @@ -897,7 +1155,7 @@ struct ec_response_gpio_get { #define EC_CMD_I2C_READ 0x94 struct ec_params_i2c_read { - uint16_t addr; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint8_t read_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; @@ -911,7 +1169,7 @@ struct ec_response_i2c_read { struct ec_params_i2c_write { uint16_t data; - uint16_t addr; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint8_t write_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; @@ -942,6 +1200,177 @@ struct ec_params_force_idle { #define EC_CMD_CONSOLE_READ 0x98 /*****************************************************************************/ + +/* + * Cut off battery power output if the battery supports. + * + * For unsupported battery, just don't implement this command and lets EC + * return EC_RES_INVALID_COMMAND. + */ +#define EC_CMD_BATTERY_CUT_OFF 0x99 + +/*****************************************************************************/ +/* USB port mux control. */ + +/* + * Switch USB mux or return to automatic switching. + */ +#define EC_CMD_USB_MUX 0x9a + +struct ec_params_usb_mux { + uint8_t mux; +} __packed; + +/*****************************************************************************/ +/* LDOs / FETs control. */ + +enum ec_ldo_state { + EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */ + EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */ +}; + +/* + * Switch on/off a LDO. + */ +#define EC_CMD_LDO_SET 0x9b + +struct ec_params_ldo_set { + uint8_t index; + uint8_t state; +} __packed; + +/* + * Get LDO state. + */ +#define EC_CMD_LDO_GET 0x9c + +struct ec_params_ldo_get { + uint8_t index; +} __packed; + +struct ec_response_ldo_get { + uint8_t state; +} __packed; + +/*****************************************************************************/ +/* Power info. */ + +/* + * Get power info. + */ +#define EC_CMD_POWER_INFO 0x9d + +struct ec_response_power_info { + uint32_t usb_dev_type; + uint16_t voltage_ac; + uint16_t voltage_system; + uint16_t current_system; + uint16_t usb_current_limit; +} __packed; + +/*****************************************************************************/ +/* I2C passthru command */ + +#define EC_CMD_I2C_PASSTHRU 0x9e + +/* Slave address is 10 (not 7) bit */ +#define EC_I2C_FLAG_10BIT (1 << 16) + +/* Read data; if not present, message is a write */ +#define EC_I2C_FLAG_READ (1 << 15) + +/* Mask for address */ +#define EC_I2C_ADDR_MASK 0x3ff + +#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */ +#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */ + +/* Any error */ +#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) + +struct ec_params_i2c_passthru_msg { + uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ + uint16_t len; /* Number of bytes to read or write */ +} __packed; + +struct ec_params_i2c_passthru { + uint8_t port; /* I2C port number */ + uint8_t num_msgs; /* Number of messages */ + struct ec_params_i2c_passthru_msg msg[]; + /* Data to write for all messages is concatenated here */ +} __packed; + +struct ec_response_i2c_passthru { + uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ + uint8_t num_msgs; /* Number of messages processed */ + uint8_t data[]; /* Data read by messages concatenated here */ +} __packed; + + +/*****************************************************************************/ +/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */ + +/* + * Dump charge state machine context. + * + * Response is a binary dump of charge state machine context. + */ +#define EC_CMD_CHARGE_DUMP 0xa0 + +/* + * Set maximum battery charging current. + */ +#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1 + +struct ec_params_current_limit { + uint32_t limit; /* in mA */ +} __packed; + +/* + * Set maximum external power current. + */ +#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2 + +struct ec_params_ext_power_current_limit { + uint32_t limit; /* in mA */ +} __packed; + +/*****************************************************************************/ +/* Smart battery pass-through */ + +/* Get / Set 16-bit smart battery registers */ +#define EC_CMD_SB_READ_WORD 0xb0 +#define EC_CMD_SB_WRITE_WORD 0xb1 + +/* Get / Set string smart battery parameters + * formatted as SMBUS "block". + */ +#define EC_CMD_SB_READ_BLOCK 0xb2 +#define EC_CMD_SB_WRITE_BLOCK 0xb3 + +struct ec_params_sb_rd { + uint8_t reg; +} __packed; + +struct ec_response_sb_rd_word { + uint16_t value; +} __packed; + +struct ec_params_sb_wr_word { + uint8_t reg; + uint16_t value; +} __packed; + +struct ec_response_sb_rd_block { + uint8_t data[32]; +} __packed; + +struct ec_params_sb_wr_block { + uint8_t reg; + uint16_t data[32]; +} __packed; + +/*****************************************************************************/ /* System commands */ /* @@ -953,23 +1382,31 @@ struct ec_params_force_idle { /* Command */ enum ec_reboot_cmd { EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */ - EC_REBOOT_JUMP_RO, /* Jump to RO without rebooting */ - EC_REBOOT_JUMP_RW, /* Jump to RW without rebooting */ + EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */ + EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */ /* (command 3 was jump to RW-B) */ EC_REBOOT_COLD = 4, /* Cold-reboot */ - EC_REBOOT_DISABLE_JUMP, /* Disable jump until next reboot */ + EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */ + EC_REBOOT_HIBERNATE = 6 /* Hibernate EC */ }; /* Flags for ec_params_reboot_ec.reboot_flags */ #define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */ -#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) -#define EC_REBOOT_FLAG_POWER_ON (1 << 2) +#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */ struct ec_params_reboot_ec { uint8_t cmd; /* enum ec_reboot_cmd */ uint8_t flags; /* See EC_REBOOT_FLAG_* */ } __packed; +/* + * Get information on last EC panic. + * + * Returns variable-length platform-dependent panic information. See panic.h + * for details. + */ +#define EC_CMD_GET_PANIC_INFO 0xd3 + /*****************************************************************************/ /* * ACPI commands @@ -1053,6 +1490,15 @@ struct ec_params_reboot_ec { #define EC_CMD_REBOOT 0xd1 /* Think "die" */ /* + * Resend last response (not supported on LPC). + * + * Returns EC_RES_UNAVAILABLE if there is no response available - for example, + * there was no previous command, or the previous command's response was too + * big to save. + */ +#define EC_CMD_RESEND_RESPONSE 0xdb + +/* * This header byte on a command indicate version 0. Any header byte less * than this means that we are talking to an old EC which doesn't support * versioning. In that case, we assume version 0. diff --git a/src/ec/google/chromeec/ec_lpc.c b/src/ec/google/chromeec/ec_lpc.c index 4e8d3fbb77..a445da87be 100644 --- a/src/ec/google/chromeec/ec_lpc.c +++ b/src/ec/google/chromeec/ec_lpc.c @@ -50,52 +50,6 @@ static int google_chromeec_wait_ready(u16 port) return 0; } -static int google_chromeec_cmd_args_supported(void) -{ - if (inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID) == 'E' && - inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID + 1) == 'C' && - (inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_HOST_CMD_FLAGS) & - EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED)) - return 1; - - return 0; -} - -static int google_chromeec_command_old(struct chromeec_command *cec_command) -{ - int i; - - if (cec_command->cmd_version) { - printk(BIOS_ERR, "Invalid version for command protocol!\n"); - return 1; - } - - if (google_chromeec_wait_ready(EC_LPC_ADDR_HOST_CMD)) { - printk(BIOS_ERR, "Timeout waiting for EC ready!\n"); - return 1; - } - - /* Copy command data, if any. */ - for (i = 0; i < cec_command->cmd_size_in; i++) - outb(((char*)cec_command->cmd_data_in)[i], - EC_LPC_ADDR_OLD_PARAM + i); - - /* Issue the command. */ - outb(cec_command->cmd_code, EC_LPC_ADDR_HOST_CMD); - - if (google_chromeec_wait_ready(EC_LPC_ADDR_HOST_CMD)) { - printk(BIOS_ERR, "Timeout waiting for EC process command %d!\n", - cec_command->cmd_code); - return 1; - } - - for (i = 0; i < cec_command->cmd_size_out; i++) - ((char*)cec_command->cmd_data_out)[i] = - inb(EC_LPC_ADDR_OLD_PARAM + i); - cec_command->cmd_code = inb(EC_LPC_ADDR_HOST_DATA); - return 0; -} - int google_chromeec_command(struct chromeec_command *cec_command) { struct ec_lpc_host_args args; @@ -105,10 +59,6 @@ int google_chromeec_command(struct chromeec_command *cec_command) int csum; int i; - /* Fall back to old command protocol if necessary */ - if (!google_chromeec_cmd_args_supported()) - return google_chromeec_command_old(cec_command); - /* Fill in args */ args.flags = EC_HOST_ARGS_FLAG_FROM_HOST; args.command_version = cec_command->cmd_version; |