3 files changed, 8 insertions, 8 deletions
diff --git a/src/drivers/ati/ragexl/xlinit.c b/src/drivers/ati/ragexl/xlinit.c
index 269758b394..6e43bf834f 100644
--- a/src/drivers/ati/ragexl/xlinit.c
+++ b/src/drivers/ati/ragexl/xlinit.c
@@ -541,7 +541,7 @@ static void ati_ragexl_init(device_t dev)
 #endif
 
 #if 0
-	printk(BIOS_DEBUG, "ati_regbase = 0x%08x, frame_buffer = 0x%08x\r\n", info->ati_regbase, info->frame_buffer);
+	printk(BIOS_DEBUG, "ati_regbase = 0x%08x, frame_buffer = 0x%08x\n", info->ati_regbase, info->frame_buffer);
 #endif
 
     	chip_id = aty_ld_le32(CONFIG_CHIP_ID, info);
@@ -561,7 +561,7 @@ static void ati_ragexl_init(device_t dev)
     	return ;
 
 found:
-    	printk(BIOS_INFO, "ati_ragexl_init: %s [0x%04x rev 0x%02x]\r\n", chipname, type, rev);
+    	printk(BIOS_INFO, "ati_ragexl_init: %s [0x%04x rev 0x%02x]\n", chipname, type, rev);
 #if 0
     	if (M64_HAS(INTEGRATED)) {
         	/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
diff --git a/src/drivers/generic/debug/debug_dev.c b/src/drivers/generic/debug/debug_dev.c
index 448d7b83c3..e7f3c617f5 100644
--- a/src/drivers/generic/debug/debug_dev.c
+++ b/src/drivers/generic/debug/debug_dev.c
@@ -92,16 +92,16 @@ static void print_smbus_regs(struct device *dev)
 		unsigned char byte;
 		status = smbus_read_byte(dev, j);
 		if (status < 0) {
-		//	printk(BIOS_DEBUG, "bad device status= %08x\r\n", status);
+		//	printk(BIOS_DEBUG, "bad device status= %08x\n", status);
 			break;
 		}
                 if ((j & 0xf) == 0) {
-                        printk(BIOS_DEBUG, "\r\n%02x: ", j);
+                        printk(BIOS_DEBUG, "\n%02x: ", j);
                 }  
 		byte = status & 0xff;
 		printk(BIOS_DEBUG, "%02x ", byte);
 	}
-	printk(BIOS_DEBUG, "\r\n");
+	printk(BIOS_DEBUG, "\n");
 }
 
 static void print_smbus_regs_all(struct device *dev)
diff --git a/src/drivers/i2c/adm1027/adm1027.c b/src/drivers/i2c/adm1027/adm1027.c
index 0caf66e088..8329f08414 100644
--- a/src/drivers/i2c/adm1027/adm1027.c
+++ b/src/drivers/i2c/adm1027/adm1027.c
@@ -26,7 +26,7 @@ static void adm1027_enable_monitoring(device_t dev)
 	result = smbus_read_byte(dev, ADM1027_REG_CONFIG1);
 
 	if (!(result & CFG1_RDY)) {
-		printk(BIOS_DEBUG, "ADM1027: monitoring not ready\r\n");
+		printk(BIOS_DEBUG, "ADM1027: monitoring not ready\n");
 		return;
 	}
 	result = (result | CFG1_STRT);
@@ -34,9 +34,9 @@ static void adm1027_enable_monitoring(device_t dev)
 
 	result = smbus_read_byte(dev, ADM1027_REG_CONFIG1);
 	if (!(result & CFG1_STRT)) {
-		printk(BIOS_DEBUG, "ADM1027: monitoring would not enable\r\n");
+		printk(BIOS_DEBUG, "ADM1027: monitoring would not enable\n");
 	}
-	printk(BIOS_DEBUG, "ADM1027: monitoring enabled\r\n");
+	printk(BIOS_DEBUG, "ADM1027: monitoring enabled\n");
 }
 
 static void adm1027_init(device_t dev)