diff options
Diffstat (limited to 'src/commonlib/include')
| -rw-r--r-- | src/commonlib/include/commonlib/console/post_codes.h | 122 |
1 files changed, 61 insertions, 61 deletions
diff --git a/src/commonlib/include/commonlib/console/post_codes.h b/src/commonlib/include/commonlib/console/post_codes.h index a8a8d953f6..0c96ee5155 100644 --- a/src/commonlib/include/commonlib/console/post_codes.h +++ b/src/commonlib/include/commonlib/console/post_codes.h @@ -31,7 +31,7 @@ * \brief Not an actual post-code - used to clear port80h * */ -#define POST_CODE_CLEAR 0x00 +#define POSTCODE_CODE_CLEAR 0x00 /** * \brief Entry into 'crt0.s'. reset code jumps to here @@ -39,7 +39,7 @@ * First instruction that gets executed after the reset vector jumps. * This indicates that the reset vector points to the correct code segment. */ -#define POST_RESET_VECTOR_CORRECT 0x01 +#define POSTCODE_RESET_VECTOR_CORRECT 0x01 /** * \brief Entry into protected mode @@ -47,14 +47,14 @@ * Preparing to enter protected mode. This is POSTed right before changing to * protected mode. */ -#define POST_ENTER_PROTECTED_MODE 0x10 +#define POSTCODE_ENTER_PROTECTED_MODE 0x10 /** * \brief Start copying coreboot to RAM with decompression if compressed * * POSTed before ramstage is about to be loaded into memory */ -#define POST_PREPARE_RAMSTAGE 0x11 +#define POSTCODE_PREPARE_RAMSTAGE 0x11 /** * \brief Copy/decompression finished; jumping to RAM @@ -62,34 +62,34 @@ * This is called after ramstage is loaded in memory, and before * the code jumps there. This represents the end of romstage. */ -#define POST_RAMSTAGE_IS_PREPARED 0x12 +#define POSTCODE_RAMSTAGE_IS_PREPARED 0x12 /** * \brief Entry into c_start * * c_start.S is the first code executing in ramstage. */ -#define POST_ENTRY_C_START 0x13 +#define POSTCODE_ENTRY_C_START 0x13 /** * \brief Entry into bootblock cache-as-RAM code * */ -#define POST_BOOTBLOCK_CAR 0x21 +#define POSTCODE_BOOTBLOCK_CAR 0x21 /** * \brief Entry into pci_scan_bus * * Entered pci_scan_bus() */ -#define POST_ENTER_PCI_SCAN_BUS 0x24 +#define POSTCODE_ENTER_PCI_SCAN_BUS 0x24 /** * \brief Entry into pci_scan_bus * * Entered pci_scan_bus() */ -#define POST_EXIT_PCI_SCAN_BUS 0x25 +#define POSTCODE_EXIT_PCI_SCAN_BUS 0x25 /** * \brief Pre-memory init preparation start @@ -97,7 +97,7 @@ * Post code emitted in romstage before making callbacks to allow SoC/mainboard * to prepare params for FSP memory init. */ -#define POST_MEM_PREINIT_PREP_START 0x34 +#define POSTCODE_MEM_PREINIT_PREP_START 0x34 /** * \brief Pre-memory init preparation end @@ -105,14 +105,14 @@ * Post code emitted in romstage after returning from SoC/mainboard callbacks * to prepare params for FSP memory init. */ -#define POST_MEM_PREINIT_PREP_END 0x36 +#define POSTCODE_MEM_PREINIT_PREP_END 0x36 /** * \brief Console is initialized * * The console is initialized and is ready for usage */ -#define POST_CONSOLE_READY 0x39 +#define POSTCODE_CONSOLE_READY 0x39 /** * \brief Console boot message succeeded @@ -120,21 +120,21 @@ * First console message has been successfully sent through the console backend * driver. */ -#define POST_CONSOLE_BOOT_MSG 0x40 +#define POSTCODE_CONSOLE_BOOT_MSG 0x40 /** * \brief Before enabling the cache * * Going to enable the cache */ -#define POST_ENABLING_CACHE 0x60 +#define POSTCODE_ENABLING_CACHE 0x60 /** * \brief Pre call to RAM stage main() * * POSTed right before RAM stage main() is called from c_start.S */ -#define POST_PRE_HARDWAREMAIN 0x6e +#define POSTCODE_PRE_HARDWAREMAIN 0x6e /** * \brief Entry into coreboot in RAM stage main() @@ -142,238 +142,238 @@ * This is the first call in hardwaremain.c. If this code is POSTed, then * ramstage has successfully loaded and started executing. */ -#define POST_ENTRY_HARDWAREMAIN 0x6f +#define POSTCODE_ENTRY_HARDWAREMAIN 0x6f /** * \brief Before Device Probe * * Boot State Machine: bs_pre_device() */ -#define POST_BS_PRE_DEVICE 0x70 +#define POSTCODE_BS_PRE_DEVICE 0x70 /** * \brief Initializing Chips * * Boot State Machine: bs_dev_init_chips() */ -#define POST_BS_DEV_INIT_CHIPS 0x71 +#define POSTCODE_BS_DEV_INIT_CHIPS 0x71 /** * \brief Starting Device Enumeration * * Boot State Machine: bs_dev_enumerate() */ -#define POST_BS_DEV_ENUMERATE 0x72 +#define POSTCODE_BS_DEV_ENUMERATE 0x72 /** * \brief Device Resource Allocation * * Boot State Machine: bs_dev_resources() */ -#define POST_BS_DEV_RESOURCES 0x73 +#define POSTCODE_BS_DEV_RESOURCES 0x73 /** * \brief Device Enable * * Boot State Machine: bs_dev_enable() */ -#define POST_BS_DEV_ENABLE 0x74 +#define POSTCODE_BS_DEV_ENABLE 0x74 /** * \brief Device Initialization * * Boot State Machine: bs_dev_init() */ -#define POST_BS_DEV_INIT 0x75 +#define POSTCODE_BS_DEV_INIT 0x75 /** * \brief After Device Probe * * Boot State Machine: bs_post_device() */ -#define POST_BS_POST_DEVICE 0x76 +#define POSTCODE_BS_POST_DEVICE 0x76 /** * \brief OS Resume Check * * Boot State Machine: bs_os_resume_check() */ -#define POST_BS_OS_RESUME_CHECK 0x77 +#define POSTCODE_BS_OS_RESUME_CHECK 0x77 /** * \brief OS Resume * * Boot State Machine: bs_os_resume() */ -#define POST_BS_OS_RESUME 0x78 +#define POSTCODE_BS_OS_RESUME 0x78 /** * \brief Write Tables * * Boot State Machine: bs_write_tables() */ -#define POST_BS_WRITE_TABLES 0x79 +#define POSTCODE_BS_WRITE_TABLES 0x79 /** * \brief Load Payload * * Boot State Machine: bs_payload_load() */ -#define POST_BS_PAYLOAD_LOAD 0x7a +#define POSTCODE_BS_PAYLOAD_LOAD 0x7a /** * \brief Boot Payload * * Boot State Machine: bs_payload_boot() */ -#define POST_BS_PAYLOAD_BOOT 0x7b +#define POSTCODE_BS_PAYLOAD_BOOT 0x7b /** * \brief Before calling FSP Notify (end of firmware) * * Going to call into FSP binary for Notify phase (end of firmware) */ -#define POST_FSP_NOTIFY_BEFORE_END_OF_FIRMWARE 0x88 +#define POSTCODE_FSP_NOTIFY_BEFORE_END_OF_FIRMWARE 0x88 /** * \brief After calling FSP Notify (end of firmware) * * Going to call into FSP binary for Notify phase (end of firmware) */ -#define POST_FSP_NOTIFY_AFTER_END_OF_FIRMWARE 0x89 +#define POSTCODE_FSP_NOTIFY_AFTER_END_OF_FIRMWARE 0x89 /** * \brief Before calling FSP TempRamInit * * Going to call into FSP binary for TempRamInit phase */ -#define POST_FSP_TEMP_RAM_INIT 0x90 +#define POSTCODE_FSP_TEMP_RAM_INIT 0x90 /** * \brief Before calling FSP TempRamExit * * Going to call into FSP binary for TempRamExit phase */ -#define POST_FSP_TEMP_RAM_EXIT 0x91 +#define POSTCODE_FSP_TEMP_RAM_EXIT 0x91 /** * \brief Before calling FSP MemoryInit * * Going to call into FSP binary for MemoryInit phase */ -#define POST_FSP_MEMORY_INIT 0x92 +#define POSTCODE_FSP_MEMORY_INIT 0x92 /** * \brief Before calling FSP SiliconInit * * Going to call into FSP binary for SiliconInit phase */ -#define POST_FSP_SILICON_INIT 0x93 +#define POSTCODE_FSP_SILICON_INIT 0x93 /** * \brief Before calling FSP Notify (after PCI enumeration) * * Going to call into FSP binary for Notify phase (after PCI enumeration) */ -#define POST_FSP_NOTIFY_BEFORE_ENUMERATE 0x94 +#define POSTCODE_FSP_NOTIFY_BEFORE_ENUMERATE 0x94 /** * \brief Before calling FSP Notify (ready to boot) * * Going to call into FSP binary for Notify phase (ready to boot) */ -#define POST_FSP_NOTIFY_BEFORE_FINALIZE 0x95 +#define POSTCODE_FSP_NOTIFY_BEFORE_FINALIZE 0x95 /** * \brief Indicate OS _PTS entry * * Called from _PTS asl method */ -#define POST_OS_ENTER_PTS 0x96 +#define POSTCODE_OS_ENTER_PTS 0x96 /** * \brief Indicate OS _WAK entry * * Called from within _WAK method */ -#define POST_OS_ENTER_WAKE 0x97 +#define POSTCODE_OS_ENTER_WAKE 0x97 /** * \brief After calling FSP MemoryInit * * FSP binary returned from MemoryInit phase */ -#define POST_FSP_MEMORY_EXIT 0x98 +#define POSTCODE_FSP_MEMORY_EXIT 0x98 /** * \brief After calling FSP SiliconInit * * FSP binary returned from SiliconInit phase */ -#define POST_FSP_SILICON_EXIT 0x99 +#define POSTCODE_FSP_SILICON_EXIT 0x99 /** * \brief Entry to write_pirq_table * * coreboot entered write_pirq_table */ -#define POST_X86_WRITE_PIRQ_TABLE 0x9a +#define POSTCODE_X86_WRITE_PIRQ_TABLE 0x9a /** * \brief Entry to write_mptable * * coreboot entered write_mptable */ -#define POST_X86_WRITE_MPTABLE 0x9b +#define POSTCODE_X86_WRITE_MPTABLE 0x9b /** * \brief Entry to write_acpi_table * * coreboot entered write_acpi_table */ -#define POST_X86_WRITE_ACPITABLE 0x9c +#define POSTCODE_X86_WRITE_ACPITABLE 0x9c /** * \brief Before calling FSP Multiphase SiliconInit * * Going to call into FSP binary for Multiple phase SI Init */ -#define POST_FSP_MULTI_PHASE_SI_INIT_ENTRY 0xa0 +#define POSTCODE_FSP_MULTI_PHASE_SI_INIT_ENTRY 0xa0 /** * \brief After calling FSP Multiphase SiliconInit * * FSP binary returned from Multiple phase SI Init */ -#define POST_FSP_MULTI_PHASE_SI_INIT_EXIT 0xa1 +#define POSTCODE_FSP_MULTI_PHASE_SI_INIT_EXIT 0xa1 /** * \brief After calling FSP Notify (after PCI enumeration) * * Going to call into FSP binary for Notify phase (after PCI enumeration) */ -#define POST_FSP_NOTIFY_AFTER_ENUMERATE 0xa2 +#define POSTCODE_FSP_NOTIFY_AFTER_ENUMERATE 0xa2 /** * \brief After calling FSP Notify (ready to boot) * * Going to call into FSP binary for Notify phase (ready to boot) */ -#define POST_FSP_NOTIFY_AFTER_FINALIZE 0xa3 +#define POSTCODE_FSP_NOTIFY_AFTER_FINALIZE 0xa3 /** * \brief Invalid or corrupt ROM * * Set if firmware failed to find or validate a resource that is stored in ROM. */ -#define POST_INVALID_ROM 0xe0 +#define POSTCODE_INVALID_ROM 0xe0 /** * \brief Invalid or corrupt CBFS * * Set if firmware failed to find or validate a resource that is stored in CBFS. */ -#define POST_INVALID_CBFS 0xe1 +#define POSTCODE_INVALID_CBFS 0xe1 /** * \brief Vendor binary error @@ -381,7 +381,7 @@ * Set if firmware failed to find or validate a vendor binary, or the binary * generated a fatal error. */ -#define POST_INVALID_VENDOR_BINARY 0xe2 +#define POSTCODE_INVALID_VENDOR_BINARY 0xe2 /** * \brief RAM failure @@ -389,28 +389,28 @@ * Set if RAM could not be initialized. This includes RAM is missing, * unsupported RAM configuration, or RAM failure. */ -#define POST_RAM_FAILURE 0xe3 +#define POSTCODE_RAM_FAILURE 0xe3 /** * \brief Hardware initialization failure * * Set when a required hardware component was not found or is unsupported. */ -#define POST_HW_INIT_FAILURE 0xe4 +#define POSTCODE_HW_INIT_FAILURE 0xe4 /** * \brief Video failure * * Video subsystem failed to initialize. */ -#define POST_VIDEO_FAILURE 0xe5 +#define POSTCODE_VIDEO_FAILURE 0xe5 /** * \brief TPM failure * * An error with the TPM, either unexpected state or communications failure. */ -#define POST_TPM_FAILURE 0xed +#define POSTCODE_TPM_FAILURE 0xed /** * \brief Not supposed to get here @@ -419,7 +419,7 @@ * * Check the console output for details. */ -#define POST_DEAD_CODE 0xee +#define POSTCODE_DEAD_CODE 0xee /** * \brief Resume from suspend failed @@ -427,7 +427,7 @@ * This post code is sent when the firmware is expected to resume it is * unable to do so. */ -#define POST_RESUME_FAILURE 0xef +#define POSTCODE_RESUME_FAILURE 0xef /** * \brief Jumping to payload @@ -435,7 +435,7 @@ * Called right before jumping to a payload. If the boot sequence stops with * this code, chances are the payload freezes. */ -#define POST_JUMPING_TO_PAYLOAD 0xf3 +#define POSTCODE_JUMPING_TO_PAYLOAD 0xf3 /** * \brief Entry into elf boot @@ -443,21 +443,21 @@ * This POST code is called right before invoking jmp_to_elf_entry() * jmp_to_elf_entry() invokes the payload, and should never return */ -#define POST_ENTER_ELF_BOOT 0xf8 +#define POSTCODE_ENTER_ELF_BOOT 0xf8 /** * \brief Final code before OS resumes * * Called right before jumping to the OS resume vector. */ -#define POST_OS_RESUME 0xfd +#define POSTCODE_OS_RESUME 0xfd /** * \brief Final code before OS boots * * This may not be called depending on the payload used. */ -#define POST_OS_BOOT 0xfe +#define POSTCODE_OS_BOOT 0xfe /** * \brief Elfload fail or die() called @@ -474,6 +474,6 @@ * \n * Check the console output to see exactly where the failure occurred. */ -#define POST_DIE 0xff +#define POSTCODE_DIE 0xff #endif /* POST_CODES_H */ |