diff options
Diffstat (limited to 'Documentation/util')
| -rw-r--r-- | Documentation/util/abuild/index.md | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/Documentation/util/abuild/index.md b/Documentation/util/abuild/index.md new file mode 100644 index 0000000000..4def2f6a49 --- /dev/null +++ b/Documentation/util/abuild/index.md @@ -0,0 +1,260 @@ +abuild +====== + +This utility is a great tool to check whether your coreboot tree +compiles for one or all targets. It compiles the 'default' build for a +mainboard. This is roughly equivalent to removing the .config file, +running `make menuconfig`, selecting the manufacturer and mainboard, +then saving the config without making any other changes. + +It is run on all patches submitted via gerrit as part of the process. +Before submitting a patch, it is a very good idea to run abuild first +to make sure your patch compiles cleanly for all. + +Note that abuild is a tool to do a simple build test, and binaries it +produces may well not boot if flashed to a system. + +### Basic usage + +abuild needs to be run from the coreboot directory. If you cd into the +coreboot/util/abuild directory and try to run it from there, it will +not run correctly. + +If you invoke abuild with no parameters, it will build all boards +automatically. + +You can also specify a single board to build with the -t option. For +example, to build the Lenovo X230 target, run: + +```bash +$ util/abuild/abuild -t lenovo/x230 +``` + +### Where builds and logs are stored + +The resulting images and logs are stored in directory coreboot-builds/ +under your current directory. This can be overridden with --outdir: + +```bash +$ util/abuild/abuild --outdir /mnt/portable/coreboot-builds +``` + +This is useful if you want to divert the build to an external hard +drive, e.g. to keep the solid-state drive holding the coreboot tree +young. + +(We will still refer to this directory as "coreboot-builds" below.) + +After running the X230 build above, the build log will be in +coreboot-builds/LENOVO_X230/make.log. + +For an overview of what passed and what failed, look at +coreboot-builds/passing_boards and coreboot-builds/failing_boards. +**These logs are overwritten with each abuild run.** Save them elsewhere +if you feel a need to reference the results later. + +### Payloads + +You can also specify a payload directory with -p: + +```bash +mkdir payloads +cp /somewhere/filo.elf payloads +``` + +Then add a file payloads/payload.sh which prints the name of the +payload to use (and takes the mainboard as a parameter) such as: + +```bash +echo "`dirname $0`/build/filo.elf" +``` + +Then you can build an image with payload by specifying: + +```bash +util/abuild/abuild -t lenovo/x230 -p ./payloads +``` + +You can also tell abuild not to use a payload: + +```bash +util/abuild/abuild -t lenovo/x230 -p none +``` + +### Build non-default configurations + +Sometimes you do need to build test a custom, non-default configuration. +This can be accomplished by placing a config file in configs/. + +First, clean your slate with `make distclean` or `rm .config`. + +Then run `make menuconfig`, select the manufacturer and mainboard, and +configure the options you need to test building for. + +Then save a minimal config file omitting options that did not change +from default: + +```bash +make savedefconfig +``` + +This file is saved as `defconfig` and can be edited further. + +Now this file can be saved in configs/ which will form the basis of a +custom configuration included in an abuild. However, it needs to be +named in a specific way for abuild to pick it up: + +``` +config.<board>_<suffix> +``` + +<board> is effectively the BOARD\_xxx Kconfig option without "BOARD\_". +<suffix> is a free form description of the configuration being built. + +For example, a config for ASUS P8Z77-M PRO that tests building with MRC +raminit code (as opposed to the default native raminit) would be named +`config.asus_p8z77_m_pro_mrc_bin` and contains: + +``` +CONFIG_VENDOR_ASUS=y +CONFIG_BOARD_ASUS_P8Z77_M_PRO=y +# CONFIG_USE_NATIVE_RAMINIT is not set +CONFIG_CPU_MICROCODE_CBFS_NONE=y +# CONFIG_BOOTBLOCK_CONSOLE is not set +# CONFIG_POSTCAR_CONSOLE is not set +``` + +For what we are trying to do, not setting USE_NATIVE_RAMINIT is the +important part. The other three optional changes are meant to speed +things up. All these options can be selected during `make menuconfig`. + +Path to MRC binary blob remains default and thus not included here. + +Custom configurations can also be put in a file and applied to an entire +abuild run using -K. Assume for example you are not interested in +the postcar stage at all and just want it to shut up, you can create +a file named `myconfig` with this line: + +``` +# CONFIG_POSTCAR_CONSOLE is not set +``` + +and run `abuild -K myconfig` to build everything with a silent postcar +stage. + +### Selectively build certain targets only (also config file naming caveats) + +The P8Z77-M PRO example above would fail for P8Z77-M, because the +config file name is ambiguous. `abuild` would pick up this config when +building for P8Z77-M, but fails when it sees that this config isn't +meant for P8Z77-M (but for P8Z77-M PRO). To avoid this error, you have +to skip this config using --skip_set: + +```bash +util/abuild/abuild --skip_set BOARD_ASUS_P8Z77_M_PRO +``` + +To complete the test, run abuild again specifically for this board +variant (see next section). + +You can skip building other targets based on other Kconfigs. To skip +building targets without a Kconfig set, use --skip_unset: + +```bash +util/abuild/abuild --skip_unset USE_NATIVE_RAMINIT +``` +This example skips building configs not using (Sandy/Ivy Bridge) native +RAM init. + +### Additional Examples + +Many boards have multiple variants. You can build for a specific +variant of a board: + +```bash +util/abuild/abuild -t asus/p8x7x-series -b p8z77-m_pro -p none +``` + +Many of the boards need files from the 'blobs' repository, which will +be initialized by the -B option. If the blobs repo has already been +initialized in your local tree, it won't hurt to add the -B. + +```bash +util/abuild/abuild -B -t lenovo/x230 -p none +``` + +Adding ccache to your system and telling abuild to use it with the -y +option will speed things up a bit: + +```bash +util/abuild/abuild -B -y -t lenovo/x230 -p none +``` + +Telling abuild to use multiple cores with the -c option helps speed +things up as well: + +```bash +util/abuild/abuild -B -y -c 8 -t lenovo/x230 -p none +``` + +Of course, the real power of abuild is in testing multiple boards. + +```bash +util/abuild/abuild -B -y -c 8 -p none +``` + +### Full options list + +```text +coreboot autobuild v0.11.01 (Feb 3, 2023) +[...] +Usage: util/abuild/abuild [options] + util/abuild/abuild [-V|--version] + util/abuild/abuild [-h|--help] + +Options: + [-a|--all] Build previously succeeded ports as well + [-A|--any-toolchain] Use any toolchain + [-b|--board-variant <name>] Build specific board variant under the + given target. + [-B|--blobs] Allow using binary files + [--checksum <path/basefile>] Store checksums at path/basefile + [-c|--cpus <numcpus>] Build on <numcpus> at the same time + [-C|--config] Configure-only mode + [-d|--dir <dir>] Directory containing config files + [-e|--exitcode] Exit with a non-zero errorlevel on failure + [-J|--junit] Write JUnit formatted xml log file + [-K|--kconfig <name>] Prepend file to generated Kconfig + [-l|--loglevel <num>] Set loglevel + [-L|--clang] Use clang on supported arch + [-n|--name] Set build name - also sets xmlfile if not + already set + [-o|--outdir <path>] Store build results in path + (defaults to coreboot-builds) + [-p|--payloads <dir>] Use payloads in <dir> to build images + [-P|--prefix <name>] File name prefix in CBFS + [-q|--quiet] Print fewer messages + [-r|--remove] Remove output dir after build + [-R|--root <path>] Absolute path to coreboot sources + (defaults to /usr/src/coreboot) + [--scan-build] Use clang's static analyzer + [--skip_set <value>] Skip building boards with this Kconfig set + [--skip_unset <value>] Skip building boards with this Kconfig not set + [--timeless] Generate timeless builds + [-t|--target <vendor/board>] Attempt to build target vendor/board only + [-T|--test] Submit image(s) to automated test system + [-u|--update] Update existing image + [-v|--verbose] Print more messages + [-x|--chromeos] Build with CHROMEOS enabled + Skip boards without ChromeOS support + [-X|--xmlfile <name>] Set JUnit XML log file filename + (defaults to /usr/src/coreboot/abuild.xml) + [-y|--ccache] Use ccache + [-z|--clean] Remove build results when finished + [-Z|--clean-somewhat] Remove build but keep coreboot.rom + config + + [-V|--version] Print version number and exit + [-h|--help] Print this help and exit + + [-s|--silent] obsolete +``` |