diff options
| -rw-r--r-- | src/cpu/samsung/exynos5250/Kconfig | 2 | ||||
| -rw-r--r-- | src/cpu/samsung/exynos5250/cpu.c | 84 |
2 files changed, 75 insertions, 11 deletions
diff --git a/src/cpu/samsung/exynos5250/Kconfig b/src/cpu/samsung/exynos5250/Kconfig index ca306b6de8..cc67abd6ff 100644 --- a/src/cpu/samsung/exynos5250/Kconfig +++ b/src/cpu/samsung/exynos5250/Kconfig @@ -96,4 +96,4 @@ config SYS_TEXT_BASE config COREBOOT_TABLES_SIZE hex - default 0x100000 + default 0x4000000 diff --git a/src/cpu/samsung/exynos5250/cpu.c b/src/cpu/samsung/exynos5250/cpu.c index 4bb06e8b4a..ee33cf362c 100644 --- a/src/cpu/samsung/exynos5250/cpu.c +++ b/src/cpu/samsung/exynos5250/cpu.c @@ -1,13 +1,80 @@ +#include <stdlib.h> +#include <string.h> +#include <stddef.h> +#include <delay.h> #include <console/console.h> #include <device/device.h> -#include <arch/cache.h> -#include <cpu/samsung/exynos5250/cpu.h> +#include <cbmem.h> +#include <cpu/samsung/exynos5250/fimd.h> +#include <cpu/samsung/exynos5-common/s5p-dp-core.h> +#include "chip.h" +#include "cpu.h" #define RAM_BASE_KB (CONFIG_SYS_SDRAM_BASE >> 10) #define RAM_SIZE_KB (CONFIG_DRAM_SIZE_MB << 10UL) +/* we distinguish a display port device from a raw graphics device + * because there are dramatic differences in startup depending on + * graphics usage. To make startup fast and easier to understand and + * debug we explicitly name this common case. The alternate approach, + * involving lots of machine and callbacks, is hard to debug and + * verify. + */ +static void exynos_displayport_init(device_t dev) +{ + int ret; + struct cpu_samsung_exynos5250_config *conf = dev->chip_info; + /* put these on the stack. If, at some point, we want to move + * this code to a pre-ram stage, it will be much easier. + */ + vidinfo_t vi; + struct exynos5_fimd_panel panel; + unsigned long int fb_size; + u32 lcdbase; + + printk(BIOS_SPEW, "%s: dev 0x%p, conf 0x%p\n", __func__, dev, conf); + memset(&vi, 0, sizeof(vi)); + memset(&panel, 0, sizeof(panel)); + + panel.is_dp = 1; /* Display I/F is eDP */ + /* while it is true that we did a memset to zero, + * we leave some 'set to zero' entries here to make + * it clear what's going on. Graphics is confusing. + */ + panel.is_mipi = 0; + panel.fixvclk = 0; + panel.ivclk = 0; + panel.clkval_f = conf->clkval_f; + panel.upper_margin = conf->upper_margin; + panel.lower_margin = conf->lower_margin; + panel.vsync = conf->vsync; + panel.left_margin = conf->left_margin; + panel.right_margin = conf->right_margin; + panel.hsync = conf->hsync; + + vi.vl_col = conf->xres; + vi.vl_row = conf->yres; + vi.vl_bpix = conf->bpp; + /* + * The size is a magic number from hardware. Allocate enough for the + * frame buffer and color map. + */ + fb_size = conf->xres * conf->yres * sizeof(unsigned long); + lcdbase = (uintptr_t)cbmem_add(CBMEM_ID_CONSOLE, fb_size + 64*KiB); + printk(BIOS_SPEW, "lcd colormap base is %p\n", (void *)(lcdbase)); + mmio_resource(dev, 0, lcdbase/KiB, 64); + vi.cmap = (void *)lcdbase; + + lcdbase += 64*KiB; + mmio_resource(dev, 1, lcdbase/KiB, fb_size + (KiB-1)/KiB); + printk(BIOS_DEBUG, + "Initializing exynos VGA, base %p\n",(void *)lcdbase); + ret = lcd_ctrl_init(&vi, &panel, (void *)lcdbase); +} + static void cpu_init(device_t dev) { + exynos_displayport_init(dev); ram_resource(dev, 0, RAM_BASE_KB, RAM_SIZE_KB); } @@ -18,22 +85,19 @@ static void cpu_noop(device_t dev) static struct device_operations cpu_ops = { .read_resources = cpu_noop, .set_resources = cpu_noop, - .enable_resources = cpu_noop, - .init = cpu_init, + .enable_resources = cpu_init, + .init = cpu_noop, .scan_bus = 0, }; -static void enable_dev(device_t dev) +static void enable_exynos5250_dev(device_t dev) { - /* Set the operations if it is a special bus type */ - if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { - dev->ops = &cpu_ops; - } + dev->ops = &cpu_ops; } struct chip_operations cpu_samsung_exynos5250_ops = { CHIP_NAME("CPU Samsung Exynos 5250") - .enable_dev = enable_dev, + .enable_dev = enable_exynos5250_dev, }; void exynos5250_config_l2_cache(void) |