diff options
| -rw-r--r-- | src/northbridge/intel/sandybridge/mchbar_regs.h | 82 |
1 files changed, 82 insertions, 0 deletions
diff --git a/src/northbridge/intel/sandybridge/mchbar_regs.h b/src/northbridge/intel/sandybridge/mchbar_regs.h index 849a8927a6..370dd74381 100644 --- a/src/northbridge/intel/sandybridge/mchbar_regs.h +++ b/src/northbridge/intel/sandybridge/mchbar_regs.h @@ -188,6 +188,85 @@ * [6] Cleared with a new sequence, and set when done and refresh counter is drained. */ +/* + * ### ECC error injection registers ### + * + * ECC_INJECT_COUNT_ch(channel) + * Defines the count of write chunks (64-bit data packets) until the + * next ECC error injection. This only seems to apply if the ECC_inject + * field in the ECC_DFT register is 110 or 111. The count is of chunks + * in order to allow creating ECC errors on different 64-bit chunks. + * + * Note that this register is only 32-bit. + * + * ECC_DFT_ch(channel) + * Control ECC DFT features, such as ECC4ANA, error inject, etc. + * + * Bitfields: + * [7..0] 8-bit fill value for ECC4ANA function. + * [9..8] ECC4ANA trigger: + * 00: ECC4ANA is off, no trigger. + * 10: Trigger on single-bit or uncorrectable error. + * 11: Trigger on uncorrectable error. + * + * [10] ECC4ANA byte select: + * 0: Byte 0 + * 1: Byte 7 + * + * [13..11] ECC_inject: ECC error inject options: + * 000: No ECC error injection. + * 100: Inject non-recoverable ECC error on GODLAT indication. + * 101: Inject non-recoverable ECC error on ECC_INJ_ADDR_COMPARE reg match. + * 110: Reserved. + * 111: Inject non-recoverable ECC error on ECC error insertion counter. + * + * [14] ECC correction disable: when set, the MC reports every error as uncorrectable. + * [15] Mark incoming transactions for ECC4ANA based on ECC_INJ_ADDR_COMPARE reg match. + * + * SCHED_SECOND_CBIT + * More chicken bits! + * + * Bitfields: + * + * [11] Disable ECC4ANA Bug Fix. WARNING: This register is only for Ivy Bridge! + * + * MAD_DIMM_ch(channel) + * Channel characteristics: number of DIMMs, number of ranks, size, + * (enhanced) interleave options and ECC options. + * + * Bitfields: + * [7..0] DIMM A size in 256 MiB units. + * [15..8] DIMM B size in 256 MiB units. + * [16] Select which of the DIMMs is DIMM A, should be the larger DIMM. + * [17] DIMM A number of ranks. (0 => Single Rank, 1 => Dual Rank) + * [18] DIMM B number of ranks. + * [19] DIMM A DDR chip width. (0 => x8, 1 => x16) + * [20] DIMM B DDR chip width. + * [21] Enable Rank Interleave. + * [22] Enable Enhanced Rank Interleave. + * [25..24] ECC control: + * 00: No ECC. + * 01: ECC is active in IO, ECC logic is not active. Used with IOSAV training. + * 10: ECC is disabled in IO, but ECC logic is enabled. Used with ECC4ANA mode. + * 11: ECC active in both IO and ECC logic. + * + * ECC_INJ_ADDR_COMPARE, ECC_INJ_ADDR_MASK + * + * Address compare for ECC error inject. Error injection is issued when + * ECC_INJ_ADDR_COMPARE[31..0] = ADDR[37..6] & ECC_INJ_ADDR_MASK[31..0]. + * + * MC_LOCK + * + * Locking of MC registers. Each bit locks one group of registers. + * + * Bitfields: + * [0] Lock all the address map registers. + * [1] Lock all the MC configuration registers including MCIO. + * [2] Lock all IOSAV and Init registers. + * [3] Lock all power management registers. + * [7] Lock all DFT features. + */ + /* Indexed register helper macros */ #define Gz(r, z) ((r) + ((z) << 8)) #define Ly(r, y) ((r) + ((y) << 2)) @@ -401,6 +480,9 @@ #define PM_DLL_CONFIG 0x5064 /* Memory Controller I/O DLL config */ #define RCOMP_TIMER 0x5084 /* RCOMP evaluation timer register */ +#define ECC_INJ_ADDR_COMPARE 0x5090 /* Address compare for ECC error inject */ +#define ECC_INJ_ADDR_MASK 0x5094 /* Address mask for ECC error inject */ + #define MC_LOCK 0x50fc /* Memory Controlller Lock register */ #define GFXVTBAR 0x5400 /* Base address for IGD */ |