diff options
| -rw-r--r-- | src/mainboard/google/dedede/variants/bugzzy/overridetree.cb | 224 |
1 files changed, 212 insertions, 12 deletions
diff --git a/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb b/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb index 906bdf71ae..92a0497189 100644 --- a/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb +++ b/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb @@ -2,6 +2,11 @@ chip soc/intel/jasperlake # MIPI display panel register "DdiPortAConfig" = "2" # DdiPortMipiDsi + # Disable PCIe Root Port 8 (index 7) + register "PcieRpEnable[7]" = "0" + # Disable PCIe Clock Source 4 (index 3) + register "PcieClkSrcUsage[3]" = "0xff" + # USB Port Configuration register "usb2_ports[0]" = "{ .enable = 1, @@ -31,7 +36,6 @@ chip soc/intel/jasperlake register "usb2_ports[4]" = "USB2_PORT_EMPTY" register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -54,9 +58,8 @@ chip soc/intel/jasperlake }, .i2c[0] = { .speed = I2C_SPEED_FAST, - .rise_time_ns = 66, - .fall_time_ns = 90, - .data_hold_time_ns = 350, + .rise_time_ns = 209, + .fall_time_ns = 12, }, .i2c[1] = { .speed = I2C_SPEED_FAST, @@ -69,12 +72,70 @@ chip soc/intel/jasperlake }, .i2c[4] = { .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - } + .rise_time_ns = 175, + .fall_time_ns = 8, }, }" device domain 0 on + device pci 04.0 on + chip drivers/intel/dptf + register "options.tsr[0].desc" = ""Memory"" + register "options.tsr[1].desc" = ""CPU"" + register "options.tsr[2].desc" = ""Charger"" + register "options.tsr[3].desc" = ""LTE"" + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 90, 10000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 100, 60000), + [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 100, 15000), + [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 60, 15000), + [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 100, 15000), + }" + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 100, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 100, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 100, SHUTDOWN), + [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 100, SHUTDOWN), + }" + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 6000, + .max_power = 6000, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 20000, + .max_power = 20000, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + register "controls.charger_perf" = "{ + [0] = { 55, 3500 }, + [1] = { 47, 3000 }, + [2] = { 39, 2500 }, + [3] = { 31, 2000 }, + }" + device generic 0 on end + end + end # SA Thermal device + device pci 05.0 on # IPU - MIPI Camera + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "2" + register "cio2_lanes_used" = "{1,4}" + register "cio2_lane_endpoint[1]" = ""^I2C3.CAM1"" + register "cio2_prt[0]" = "0" + register "cio2_prt[1]" = "2" + device generic 0 on end + end + end device pci 14.0 on chip drivers/usb/acpi device usb 0.0 on @@ -99,10 +160,149 @@ chip soc/intel/jasperlake end end end # USB xHCI - device pci 15.0 on end - device pci 15.2 on end - device pci 1c.7 on end - device pci 19.0 on end - device pci 1f.3 on end + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_03" + register "probed" = "1" + device i2c 15 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""ZNT0000"" + register "generic.desc" = ""Zinitix Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)" + register "generic.wake" = "GPE0_DW0_03" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0xE" + device i2c 40 on end + end + end # I2C 0 + device pci 15.1 on + chip drivers/i2c/hid + register "generic.hid" = ""WCOM014B"" + register "generic.desc" = ""WCOM Digitizer"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D7_IRQ)" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" + register "generic.enable_delay_ms" = "20" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E1)" + register "generic.reset_delay_ms" = "100" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x1" + device i2c 0x09 on end + end + end # I2C #1 + device pci 15.2 on + chip drivers/i2c/hid + register "generic.hid" = ""HX121A"" + register "generic.desc" = ""HX Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" + register "generic.reset_delay_ms" = "120" + register "generic.reset_off_delay_ms" = "2" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x1" + device i2c 0x4F on end + end + end # I2C #2 + device pci 15.3 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI8856"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""Ov 8856 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "1" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "2" + register "link_freq[0]" = "360000000" + register "link_freq[1]" = "180000000" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 + register "clk_panel.clks[0].freq" = "1" #19.2 Mhz + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #power_enable_2p8 + register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2 + register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" + register "acpi_uid" = "3" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW AF DAC"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC"" + register "vcm_compat" = ""dongwoon,dw9714"" + + device i2c 0C on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""GT24C08"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "nvm_size" = "0x2000" + register "nvm_pagesize" = "1" + register "nvm_readonly" = "1" + register "nvm_width" = "0x10" + register "nvm_compat" = ""atmel,24c08"" + + device i2c 50 on end + end + end # I2C 3 + device pci 1c.7 off end # PCI Express Root Port 8 + device pci 19.0 on + chip drivers/i2c/da7219 + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" + register "btn_cfg" = "50" + register "mic_det_thr" = "500" + register "jack_ins_deb" = "20" + register "jack_det_rate" = ""32ms_64ms"" + register "jack_rem_deb" = "1" + register "a_d_btn_thr" = "0xa" + register "d_b_btn_thr" = "0x16" + register "b_c_btn_thr" = "0x21" + register "c_mic_btn_thr" = "0x3e" + register "btn_avg" = "4" + register "adc_1bit_rpt" = "1" + register "micbias_lvl" = "2600" + register "mic_amp_in_sel" = ""diff"" + device i2c 1a on end + end + end #I2C 4 + device pci 1f.3 on + chip drivers/generic/max98357a + register "hid" = ""MX98360A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)" + device generic 0 on end + end + end # Intel HDA end end |