summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/mainboard/gigabyte/Kconfig3
-rw-r--r--src/mainboard/gigabyte/m57sli/Kconfig153
-rw-r--r--src/mainboard/gigabyte/m57sli/Makefile.inc67
-rw-r--r--src/mainboard/gigabyte/m57sli/devicetree.cb349
4 files changed, 383 insertions, 189 deletions
diff --git a/src/mainboard/gigabyte/Kconfig b/src/mainboard/gigabyte/Kconfig
index ad5003c2c5..847460db94 100644
--- a/src/mainboard/gigabyte/Kconfig
+++ b/src/mainboard/gigabyte/Kconfig
@@ -21,8 +21,9 @@
choice
prompt "Mainboard model"
depends on VENDOR_GIGABYTE
-
+
source "src/mainboard/gigabyte/ga-6bxc/Kconfig"
+source "src/mainboard/gigabyte/m57sli/Kconfig"
endchoice
diff --git a/src/mainboard/gigabyte/m57sli/Kconfig b/src/mainboard/gigabyte/m57sli/Kconfig
new file mode 100644
index 0000000000..124d1d9708
--- /dev/null
+++ b/src/mainboard/gigabyte/m57sli/Kconfig
@@ -0,0 +1,153 @@
+
+config BOARD_GIGABYTE_M57SLI
+ bool "M57SLI"
+ select ARCH_X86
+ select CPU_AMD_K8
+ select CPU_AMD_SOCKET_AM2
+ select NORTHBRIDGE_AMD_AMDK8
+ select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
+ select SOUTHBRIDGE_NVIDIA_MCP55
+ select SUPERIO_ITE_IT8716F
+ select PIRQ_TABLE
+ select USE_PRINTK_IN_CAR
+ select USE_DCACHE_RAM
+ select HAVE_HARD_RESET
+ select HAVE_HIGH_TABLES
+ select IOAPIC
+ select MEM_TRAIN_SEQ
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+ select HAVE_ACPI_TABLES
+ select K8_REV_F_SUPPORT
+ select PCI_ROM_RUN
+ select CONSOLE_VGA
+ select HAVE_FANCTL
+
+config MAINBOARD_DIR
+ string
+ default gigabyte/m57sli
+ depends on BOARD_GIGABYTE_M57SLI
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xc8000
+ depends on BOARD_GIGABYTE_M57SLI
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x08000
+ depends on BOARD_GIGABYTE_M57SLI
+
+config DCACHE_RAM_GLOBAL_VAR_SIZE
+ hex
+ default 0x01000
+ depends on BOARD_GIGABYTE_M57SLI
+
+config APIC_ID_OFFSET
+ hex
+ default 16
+ depends on BOARD_GIGABYTE_M57SLI
+
+config SB_HT_CHAIN_ON_BUS0
+ int
+ default 2
+ depends on BOARD_GIGABYTE_M57SLI
+
+config LB_CKS_RANGE_START
+ int
+ default 49
+ depends on BOARD_GIGABYTE_M57SLI
+
+config LB_CKS_RANGE_END
+ int
+ default 122
+ depends on BOARD_GIGABYTE_M57SLI
+
+config LB_CKS_LOC
+ int
+ default 123
+ depends on BOARD_GIGABYTE_M57SLI
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "m57sli"
+ depends on BOARD_GIGABYTE_M57SLI
+
+config PCI_64BIT_PREF_MEM
+ bool
+ default n
+ depends on BOARD_GIGABYTE_M57SLI
+
+config HAVE_FALLBACK_BOOT
+ bool
+ default n
+ depends on BOARD_GIGABYTE_M57SLI
+
+config USE_FALLBACK_IMAGE
+ bool
+ default n
+ depends on BOARD_GIGABYTE_M57SLI
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x100000
+ depends on BOARD_GIGABYTE_M57SLI
+
+config USE_FAILOVER_IMAGE
+ bool
+ default n
+ depends on BOARD_GIGABYTE_M57SLI
+
+config MAX_CPUS
+ int
+ default 2
+ depends on BOARD_GIGABYTE_M57SLI
+
+config MAX_PHYSICAL_CPUS
+ int
+ default 1
+ depends on BOARD_GIGABYTE_M57SLI
+
+config AP_CODE_IN_CAR
+ bool
+ default n
+ depends on BOARD_GIGABYTE_M57SLI
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+ depends on BOARD_GIGABYTE_M57SLI
+
+config HT_CHAIN_UNITID_BASE
+ hex
+ default 0x0
+ depends on BOARD_GIGABYTE_M57SLI
+
+config HT_CHAIN_END_UNITID_BASE
+ hex
+ default 0x0
+ depends on BOARD_GIGABYTE_M57SLI
+
+config USE_INIT
+ bool
+ default n
+ depends on BOARD_GIGABYTE_M57SLI
+
+config SERIAL_CPU_INIT
+ bool
+ default n
+ depends on BOARD_GIGABYTE_M57SLI
+
+config WAIT_BEFORE_CPUS_INIT
+ bool
+ default n
+ depends on BOARD_GIGABYTE_M57SLI
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+ hex
+ default 0x1022
+ depends on BOARD_GIGABYTE_M57SLI
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+ hex
+ default 0x2b80
+ depends on BOARD_GIGABYTE_M57SLI
diff --git a/src/mainboard/gigabyte/m57sli/Makefile.inc b/src/mainboard/gigabyte/m57sli/Makefile.inc
new file mode 100644
index 0000000000..a225e61304
--- /dev/null
+++ b/src/mainboard/gigabyte/m57sli/Makefile.inc
@@ -0,0 +1,67 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+driver-y += mainboard.o
+
+#needed by irq_tables and mptable and acpi_tables
+obj-y += get_bus_conf.o
+obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
+obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o
+obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o
+obj-$(CONFIG_HAVE_FANCTL) += fanctl.o
+
+# This is part of the conversion to init-obj and away from included code.
+initobj-y += crt0.o
+crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
+crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
+crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
+crt0-y += ../../../../src/arch/i386/lib/id.inc
+crt0-y += ../../../../src/cpu/amd/car/cache_as_ram.inc
+crt0-y += auto.inc
+
+ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
+ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
+ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
+ldscript-y += ../../../../src/arch/i386/lib/id.lds
+ldscript-y += ../../../../src/arch/i386/lib/failover.lds
+ldscript-$(CONFIG_AP_CODE_IN_CAR) += ../../../../src/arch/i386/init/ldscript_apc.lb
+
+ifdef POST_EVALUATION
+
+$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+ iasl -p $(obj)/dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+ mv $(obj)/dsdt.hex $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/apc_auto.o: $(src)/mainboard/$(MAINBOARDDIR)/apc_auto.c $(obj)/option_table.h
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/apc_auto.c -o $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@
+ perl -e 's/\.rodata/.rom.data/g' -pi $@
+ perl -e 's/\.text/.section .rom.text/g' -pi $@
+
+endif
diff --git a/src/mainboard/gigabyte/m57sli/devicetree.cb b/src/mainboard/gigabyte/m57sli/devicetree.cb
index 60692d664a..0c5dd3b09f 100644
--- a/src/mainboard/gigabyte/m57sli/devicetree.cb
+++ b/src/mainboard/gigabyte/m57sli/devicetree.cb
@@ -1,202 +1,175 @@
chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_AM2
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/ite/it8716f
- # Floppy and any LDN
- device pnp 2e.0 off
- # Watchdog from CLKIN, CLKIN = 24 MHz
- irq 0x23 = 0x11
+ device apic_cluster 0 on
+ chip cpu/amd/socket_AM2
+ device apic 0 on end
+ end
+end
+device pci_domain 0 on
+ chip northbridge/amd/amdk8
+ device pci 18.0 on
+ chip southbridge/nvidia/mcp55
+ device pci 0.0 on end
+ device pci 1.0 on
+ chip superio/ite/it8716f
+ # Floppy and any LDN
+ device pnp 2e.0 on
+ # Watchdog from CLKIN, CLKIN = 24 MHz
+ irq 0x23 = 0x11
# Serial Flash (SPI only)
- #0x24 = 0x1a
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # EC
- io 0x60 = 0x290
- io 0x62 = 0x230
- irq 0x70 = 9
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 on # Mouse
- irq 0x70 = 12
- end
- device pnp 2e.7 on # GPIO, SPI flash
- # pin 84 is not GP10
- irq 0x25 = 0x0
- # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
- irq 0x26 = 0x43
- # pin 13 is GP35
- irq 0x27 = 0x20
- # pin 70 is not GP46
- #irq 0x28 = 0x0
- # pin 6,3,128,127,126 is GP63,64,65,66,67
- irq 0x29 = 0x81
- # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V
- #irq 0x2c = 0x1f
- # Simple I/O base
- io 0x62 = 0x800
- # Serial Flash I/O (SPI only)
- io 0x64 = 0x820
- # watch dog force timeout (parallel flash only)
- #irq 0x71 = 0x1
- # No WDT interrupt
- irq 0x72 = 0x0
- # GPIO pin set 1 disable internal pullup
- irq 0xb8 = 0x0
- # GPIO pin set 5 enable internal pullup
- irq 0xbc = 0x01
- # SIO pin set 1 alternate function
- #irq 0xc0 = 0x0
- # SIO pin set 2 mixed function
- irq 0xc1 = 0x43
- # SIO pin set 3 mixed function
- irq 0xc2 = 0x20
- # SIO pin set 4 alternate function
- #irq 0xc3 = 0x0
- # SIO pin set 1 input mode
- #irq 0xc8 = 0x0
- # SIO pin set 2 input mode
- irq 0xc9 = 0x0
- # SIO pin set 4 input mode
- #irq 0xcb = 0x0
- # Generate SMI# on EC IRQ
- #irq 0xf0 = 0x10
- # SMI# level trigger
- #irq 0xf1 = 0x40
- # HWMON alert beep pin location
- irq 0xf6 = 0x28
- end
- device pnp 2e.8 off # MIDI
- io 0x60 = 0x300
- irq 0x70 = 10
- end
- device pnp 2e.9 off # GAME
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR
+ #0x24 = 0x1a
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 on # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 on # EC
+ io 0x60 = 0x290
+ io 0x62 = 0x230
+ irq 0x70 = 9
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 on # Mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.7 on # GPIO, SPI flash
+ # pin 84 is not GP10
+ irq 0x25 = 0x0
+ # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
+ irq 0x26 = 0x43
+ # pin 13 is GP35
+ irq 0x27 = 0x20
+ # pin 70 is not GP46
+ #irq 0x28 = 0x0
+ # pin 6,3,128,127,126 is GP63,64,65,66,67
+ irq 0x29 = 0x81
+ # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V
+ #irq 0x2c = 0x1f
+ # Simple I/O base
+ io 0x62 = 0x800
+ # Serial Flash I/O (SPI only)
+ io 0x64 = 0x820
+ # watch dog force timeout (parallel flash only)
+ #irq 0x71 = 0x1
+ # No WDT interrupt
+ irq 0x72 = 0x0
+ # GPIO pin set 1 disable internal pullup
+ irq 0xb8 = 0x0
+ # GPIO pin set 5 enable internal pullup
+ irq 0xbc = 0x01
+ # SIO pin set 1 alternate function
+ #irq 0xc0 = 0x0
+ # SIO pin set 2 mixed function
+ irq 0xc1 = 0x43
+ # SIO pin set 3 mixed function
+ irq 0xc2 = 0x20
+ # SIO pin set 4 alternate function
+ #irq 0xc3 = 0x0
+ # SIO pin set 1 input mode
+ #irq 0xc8 = 0x0
+ # SIO pin set 2 input mode
+ irq 0xc9 = 0x0
+ # SIO pin set 4 input mode
+ #irq 0xcb = 0x0
+ # Generate SMI# on EC IRQ
+ #irq 0xf0 = 0x10
+ # SMI# level trigger
+ #irq 0xf1 = 0x40
+ # HWMON alert beep pin location
+ irq 0xf6 = 0x28
+ end
+ device pnp 2e.8 off # MIDI
+ io 0x60 = 0x300
+ irq 0x70 = 10
+ end
+ device pnp 2e.9 off # GAME
+ io 0x60 = 0x220
+ end
+ device pnp 2e.a off # CIR
end
end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
-#WTF?!? We already have device pci 1.1 in the section above
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on end # PCI
- device pci 6.1 on end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 off end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
+ end
+ device pci 1.1 on
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
+ end # SM
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # IDE
+ device pci 5.0 on end # SATA 0
+ device pci 5.1 on end # SATA 1
+ device pci 5.2 on end # SATA 2
+ device pci 6.0 on end # PCI
+ device pci 6.1 on end # AUDIO
+ device pci 8.0 on end # NIC
+ device pci 9.0 off end # N/A
+ device pci a.0 on end # PCI E 5
+ device pci b.0 on end # PCI E 4
+ device pci c.0 on end # PCI E 3
+ device pci d.0 on end # PCI E 2
+ device pci e.0 on end # PCI E 1
+ device pci f.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
register "mac_eeprom_addr" = "0x51"
end
- end # device pci 18.0
+ end #device pci 18.0
device pci 18.0 on end # Link 1
- device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end # mc0
-
end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 on end # pci_regs_all
+# device pnp 0.2 on end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 on end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# device pnp 0.8 off end # io
+# device pnp 0.9 off end # io
+# end
+
end #root_complex
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 23:16:52 +0000