diff options
| author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2015-10-13 15:01:15 +0300 |
|---|---|---|
| committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2016-10-28 16:56:55 +0200 |
| commit | e1c36aecd8c5ad580595da58e180b06195df5f00 (patch) | |
| tree | 142f543da79ab2090b895e0e1913e0d7aec821c8 /src | |
| parent | 78f73353a3c0b7e3e59d0372f02dc1c37b226ac4 (diff) | |
pcengines/apu1: Add RS485 configuration
In RS485 mode RTS line acts as a transceiver direction control.
The datasheet is not very clear about the polarity but register setting
here is tested to drive nRTS line high when transmitting.
Also note revision of B of the super-IO has errata and 8N1 setting does
not work properly, you would need revision C of the chip assembled to
fix this.
Change-Id: I705fe0c5a5f8369b0a9358a64c74500238b5c4ba
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14998
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/pcengines/apu1/Kconfig | 6 | ||||
| -rw-r--r-- | src/mainboard/pcengines/apu1/mainboard.c | 23 |
2 files changed, 29 insertions, 0 deletions
diff --git a/src/mainboard/pcengines/apu1/Kconfig b/src/mainboard/pcengines/apu1/Kconfig index e9aab8cbfe..3099d14386 100644 --- a/src/mainboard/pcengines/apu1/Kconfig +++ b/src/mainboard/pcengines/apu1/Kconfig @@ -95,6 +95,9 @@ config APU1_PINMUX_UART_C endchoice +config UART_C_RS485 + bool "UART C drives RTS# in RS485 mode" if APU1_PINMUX_UART_C + choice prompt "J19 pins 11-20" default APU1_PINMUX_OFF_D @@ -110,4 +113,7 @@ config APU1_PINMUX_UART_D endchoice +config UART_D_RS485 + bool "UART D drives RTS# in RS485 mode" if APU1_PINMUX_UART_D + endif # BOARD_PCENGINES_APU1 diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c index 96b20209f9..055cd58dd5 100644 --- a/src/mainboard/pcengines/apu1/mainboard.c +++ b/src/mainboard/pcengines/apu1/mainboard.c @@ -158,6 +158,28 @@ static void config_gpio_mux(void) gpio->enabled = CONFIG_APU1_PINMUX_GPIO1; } +static void pnp_raw_resource(struct device *dev, u8 reg, u8 val) +{ + struct resource *res; + res = new_resource(dev, reg); + res->base = val; + res->size = 0; + res->flags |= IORESOURCE_IRQ | IORESOURCE_ASSIGNED; +} + +static void config_addon_uart(void) +{ + struct device *uart; + + uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP3); + if (uart && uart->enabled && CONFIG_UART_C_RS485) + pnp_raw_resource(uart, 0xf2, 0x12); + + uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP4); + if (uart && uart->enabled && CONFIG_UART_D_RS485) + pnp_raw_resource(uart, 0xf2, 0x12); +} + /** * TODO * SB CIMx callback @@ -182,6 +204,7 @@ static void mainboard_enable(device_t dev) printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); config_gpio_mux(); + config_addon_uart(); /* Power off unused clock pins of GPP PCIe devices */ u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); |