soc/mediatek: Add common implementation to configure display

The sequences of configure_display() are similar on MediaTek platforms.

The sequences usually involve following steps:
1. Setup mtcmos for display hardware block.
  - mtcmos_display_power_on()
  - mtcmos_protect_display_bus()
2. Configure backlight pins
3. Power on the panel
   - It also powers on the bridge in MIPI DSI to eDP case.
4. General initialization for DDP(display data path)
5. Initialize eDP/MIPI DSI accordingly,
   - For eDP path, it calls mtk_edp_init() to get edid from the panel
     and initializes eDP driver.
   - For MIPI DSI path, the edid is retrieved either from the bridge or
     from CBFS (the serializable data), and then initializes DSI driver.
6. Set framebuffer bits per pixel
7. Setup DDP mode
8. Setup panel orientation

This patch extracts geralt/display.c to mediatek/common/display.c and
refactors `struct panel_description` to generalize the display init
sequences. configure_display() is also renamed to mtk_display_init().

TEST=check FW screen on geralt.

Change-Id: I403bba8a826de5f3fb2ea96a5403725ff194164f
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79776
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

4 files changed, 150 insertions, 9 deletions

diff --git a/src/soc/mediatek/common/display.c b/src/soc/mediatek/common/display.c
new file mode 100644
index 0000000000..72b7fe04bd
--- /dev/null
+++ b/src/soc/mediatek/common/display.c
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cbfs.h>
+#include <console/console.h>
+#include <delay.h>
+#include <edid.h>
+#include <framebuffer_info.h>
+#include <soc/ddp.h>
+#include <soc/display.h>
+#include <soc/dptx.h>
+#include <soc/dsi.h>
+#include <soc/mtcmos.h>
+#include <string.h>
+
+static struct panel_serializable_data *get_mipi_cmd_from_cbfs(struct panel_description *desc)
+{
+	/*
+	 * The CBFS file name is panel-{MANUFACTURER}-${PANEL_NAME}, where MANUFACTURER is 3
+	 * characters and PANEL_NAME is usually 13 characters.
+	 */
+	char cbfs_name[64];
+	static union {
+		u8 raw[4 * 1024];  /* Most panels only need < 2K. */
+		struct panel_serializable_data s;
+	} buffer;
+
+	if (!desc->name) {
+		printk(BIOS_ERR, "Missing panel CBFS file name.\n");
+		return NULL;
+	}
+
+	snprintf(cbfs_name, sizeof(cbfs_name), "panel-%s", desc->name);
+	if (cbfs_load(cbfs_name, buffer.raw, sizeof(buffer)))
+		return &buffer.s;
+
+	printk(BIOS_ERR, "Missing %s in CBFS.\n", cbfs_name);
+	return NULL;
+}
+
+int mtk_display_init(void)
+{
+	struct edid edid;
+	struct fb_info *info;
+	const char *name;
+	struct panel_description *panel = get_active_panel();
+
+	if (!panel || panel->disp_path == DISP_PATH_NONE) {
+		printk(BIOS_ERR, "%s: Failed to get the active panel\n", __func__);
+		return -1;
+	}
+
+	printk(BIOS_INFO, "%s: Starting display initialization\n", __func__);
+
+	mtcmos_display_power_on();
+	mtcmos_protect_display_bus();
+
+	if (panel->configure_backlight)
+		panel->configure_backlight();
+	if (panel->power_on)
+		panel->power_on();
+
+	mtk_ddp_init();
+
+	if (panel->disp_path == DISP_PATH_EDP) {
+		mdelay(200);
+		if (mtk_edp_init(&edid) < 0) {
+			printk(BIOS_ERR, "%s: Failed to initialize eDP\n", __func__);
+			return -1;
+		}
+	} else {
+
+		struct panel_serializable_data *mipi_data = NULL;
+
+		if (panel->get_edid) {
+			if (panel->get_edid(&edid) < 0)
+				return -1;
+		} else {
+			mipi_data = get_mipi_cmd_from_cbfs(panel);
+			if (!mipi_data)
+				return -1;
+			edid = mipi_data->edid;
+		}
+
+		u32 mipi_dsi_flags = (MIPI_DSI_MODE_VIDEO |
+				      MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+				      MIPI_DSI_MODE_LPM |
+				      MIPI_DSI_MODE_EOT_PACKET);
+
+		if (mtk_dsi_init(mipi_dsi_flags, MIPI_DSI_FMT_RGB888, 4, &edid,
+				 mipi_data ? mipi_data->init : NULL) < 0) {
+			printk(BIOS_ERR, "%s: Failed in DSI init\n", __func__);
+			return -1;
+		}
+
+		if (panel->post_power_on && panel->post_power_on(&edid) < 0) {
+			printk(BIOS_ERR, "%s: Failed to post power on bridge\n", __func__);
+			return -1;
+		}
+	}
+
+	name = edid.ascii_string;
+	if (name[0] == '\0')
+		name = "unknown name";
+	printk(BIOS_INFO, "%s: '%s %s' %dx%d@%dHz\n", __func__,
+	       edid.manufacturer_name, name, edid.mode.ha, edid.mode.va,
+	       edid.mode.refresh);
+
+	edid_set_framebuffer_bits_per_pixel(&edid, 32, 0);
+
+	mtk_ddp_mode_set(&edid, panel->disp_path);
+	info = fb_new_framebuffer_info_from_edid(&edid, (uintptr_t)0);
+	if (info)
+		fb_set_orientation(info, panel->orientation);
+
+	return 0;
+}
diff --git a/src/soc/mediatek/common/include/soc/display.h b/src/soc/mediatek/common/include/soc/display.h
new file mode 100644
index 0000000000..61bc21fc98
--- /dev/null
+++ b/src/soc/mediatek/common/include/soc/display.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_MEDIATEK_COMMON_DISPLAY_H__
+#define __SOC_MEDIATEK_COMMON_DISPLAY_H__
+
+#include <commonlib/coreboot_tables.h>
+#include <mipi/panel.h>
+
+enum disp_path_sel {
+	DISP_PATH_NONE = 0,
+	DISP_PATH_EDP,
+	DISP_PATH_MIPI,
+};
+
+struct panel_description {
+	const char *name;
+	void (*configure_backlight)(void);
+	void (*power_on)(void);
+	int (*get_edid)(struct edid *edid);
+	int (*post_power_on)(const struct edid *edid);
+	enum lb_fb_orientation orientation;
+	enum disp_path_sel disp_path;
+	bool pwm_ctrl_gpio;
+};
+
+int mtk_display_init(void);
+struct panel_description *get_active_panel(void);
+
+void mtk_ddp_init(void);
+void mtk_ddp_mode_set(const struct edid *edid, enum disp_path_sel path);
+
+#endif
diff --git a/src/soc/mediatek/mt8188/Makefile.inc b/src/soc/mediatek/mt8188/Makefile.inc
index 6a643b0057..4731fab14c 100644
--- a/src/soc/mediatek/mt8188/Makefile.inc
+++ b/src/soc/mediatek/mt8188/Makefile.inc
@@ -37,6 +37,7 @@ ramstage-y += cpu_input_gating.c
 ramstage-y += ../common/ddp.c ddp.c
 ramstage-y += ../common/devapc.c devapc.c
 ramstage-y += ../common/dfd.c
+ramstage-y += ../common/display.c
 ramstage-y += ../common/dp/dp_intf.c ../common/dp/dptx.c ../common/dp/dptx_hal.c dp_intf.c
 ramstage-y += ../common/dpm.c
 ramstage-$(CONFIG_DPM_FOUR_CHANNEL) += ../common/dpm_4ch.c
diff --git a/src/soc/mediatek/mt8188/include/soc/ddp.h b/src/soc/mediatek/mt8188/include/soc/ddp.h
index da14a2c4e7..94fdb810a7 100644
--- a/src/soc/mediatek/mt8188/include/soc/ddp.h
+++ b/src/soc/mediatek/mt8188/include/soc/ddp.h
@@ -5,6 +5,7 @@
 
 #include <soc/addressmap.h>
 #include <soc/ddp_common.h>
+#include <soc/display.h>
 #include <types.h>
 
 #define MAIN_PATH_OVL_NR 1
@@ -282,13 +283,4 @@ enum {
 	SMI_LARB_PORT_L0_OVL_RDMA0	= 0xF88,
 };
 
-enum disp_path_sel {
-	DISP_PATH_NONE = 0,
-	DISP_PATH_EDP,
-	DISP_PATH_MIPI,
-};
-
-void mtk_ddp_init(void);
-void mtk_ddp_mode_set(const struct edid *edid, enum disp_path_sel);
-
 #endif