* update quartet target to latest SMP changes.

* remove dead code from coherent_ht.c
* add ldtstop code for link speed changes


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 3 insertions, 392 deletions

diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c
index 23ebd60e81..471af5a415 100644
--- a/src/northbridge/amd/amdk8/coherent_ht.c
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -1,333 +1,3 @@
-#if 0
-static void setup_coherent_ht_domain(void)
-{
-	static const unsigned int register_values[] = {
-	/* Routing Table Node i 
-	 * F0:0x40 i = 0, 
-	 * F0:0x44 i = 1,
-	 * F0:0x48 i = 2, 
-	 * F0:0x4c i = 3,
-	 * F0:0x50 i = 4, 
-	 * F0:0x54 i = 5,
-	 * F0:0x58 i = 6, 
-	 * F0:0x5c i = 7
-	 * [ 0: 3] Request Route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 * [11: 8] Response Route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 * [19:16] Broadcast route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 */
-	PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101,
-	PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101,
-	PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101,
-	PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101,
-	PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101,
-	PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101,
-	PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101,
-	PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101,
-
-	/* Hypetransport Transaction Control Register 
-	 * F0:0x68
-	 * [ 0: 0] Disable read byte probe
-	 *         0 = Probes issues
-	 *         1 = Probes not issued
-	 * [ 1: 1] Disable Read Doubleword probe
-	 *         0 = Probes issued
-	 *         1 = Probes not issued
-	 * [ 2: 2] Disable write byte probes
-	 *         0 = Probes issued
-	 *         1 = Probes not issued
-	 * [ 3: 3] Disable Write Doubleword Probes
-	 *         0 = Probes issued
-	 *         1 = Probes not issued.
-	 * [ 4: 4] Disable Memroy Controller Target Start
-	 *         0 = TgtStart packets are generated
-	 *         1 = TgtStart packets are not generated.
-	 * [ 5: 5] CPU1 Enable
-	 *         0 = Second CPU disabled or not present
-	 *         1 = Second CPU enabled.
-	 * [ 6: 6] CPU Request PassPW
-	 *         0 = CPU requests do not pass posted writes
-	 *         1 = CPU requests pass posted writes.
-	 * [ 7: 7] CPU read Respons PassPW
-	 *         0 = CPU Responses do not pass posted writes
-	 *         1 = CPU responses pass posted writes.
-	 * [ 8: 8] Disable Probe Memory Cancel
-	 *         0 = Probes may generate MemCancels
-	 *         1 = Probes may not generate MemCancels
-	 * [ 9: 9] Disable Remote Probe Memory Cancel.
-	 *         0 = Probes hitting dirty blocks generate memory cancel packets
-	 *         1 = Only probed caches on the same node as the memory controller
-	 *              generate cancel packets.
-	 * [10:10] Disable Fill Probe
-	 *         0 = Probes issued for cache fills
-	 *         1 = Probes not issued for cache fills.
-	 * [11:11] Response PassPw
-	 *         0 = Downstream response PassPW based on original request
-	 *         1 = Downstream response PassPW set to 1
-	 * [12:12] Change ISOC to Ordered
-	 *         0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization
-	 *         1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering.
-	 * [14:13] Buffer Release Priority select 
-	 *         00 = 64
-	 *         01 = 16
-	 *         10 = 8
-	 *         11 = 2
-	 * [15:15] Limit Coherent HT Configuration Space Range
-	 *         0 = No coherent HT configuration space restrictions
-	 *         1 = Limit coherent HT configuration space based on node count
-	 * [16:16] Local Interrupt Conversion Enable.
-	 *         0 = ExtInt/NMI interrups unaffected.
-	 *         1 = ExtInt/NMI broadcat interrupts converted to LINT0/1
-	 * [17:17] APIC Extended Broadcast Enable.
-	 *         0 = APIC broadcast is 0F
-	 *         1 = APIC broadcast is FF
-	 * [18:18] APIC Extended ID Enable
-	 *         0 = APIC ID is 4 bits.
-	 *         1 = APIC ID is 8 bits.
-	 * [19:19] APIC Extended Spurious Vector Enable
-	 *         0 = Lower 4 bits of spurious vector are read-only 1111
-	 *         1 = Lower 4 bits of spurious vecotr are writeable.
-	 * [20:20] Sequence ID Source Node Enable
-	 *         0 = Normal operation
-	 *         1 = Keep SeqID on routed packets for debugging.
-	 * [22:21] Downstream non-posted request limit
-	 *         00 = No limit
-	 *         01 = Limited to 1
-	 *         10 = Limited to 4
-	 *         11 = Limited to 8
-	 * [23:23] RESERVED
-	 * [25:24] Medium-Priority Bypass Count
-	 *         - Maximum # of times a medium priority access can pass a low
-	 *           priority access before Medium-Priority mode is disabled for one access.
-	 * [27:26] High-Priority Bypass Count
-	 *         - Maximum # of times a high prioirty access can pass a medium or low
-	 *           priority access before High-prioirty mode is disabled for one access.
-	 * [28:28] Enable High Priority CPU Reads
-	 *         0 = Cpu reads are medium prioirty
-	 *         1 = Cpu reads are high prioirty
-	 * [29:29] Disable Low Priority Writes
-	 *         0 = Non-isochronous writes are low priority
-	 *         1 = Non-isochronous writes are medium prioirty
-	 * [30:30] Disable High Priority Isochronous writes
-	 *         0 = Isochronous writes are high priority
-	 *         1 = Isochronous writes are medium priority
-	 * [31:31] Disable Medium Priority Isochronous writes
-	 *         0 = Isochronous writes are medium are high
-	 *         1 = With bit 30 set makes Isochrouns writes low priority.
-	 */
-	PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f,
-	/* HT Initialization Control Register
-	 * F0:0x6C ok...
-	 * [ 0: 0] Routing Table Disable
-	 *         0 = Packets are routed according to routing tables
-	 *         1 = Packets are routed according to the default link field
-	 * [ 1: 1] Request Disable (BSP should clear this)
-	 *         0 = Request packets may be generated
-	 *         1 = Request packets may not be generated.
-	 * [ 3: 2] Default Link (Read-only)
-	 *         00 = LDT0
-	 *         01 = LDT1
-	 *         10 = LDT2
-	 *         11 = CPU on same node
-	 * [ 4: 4] Cold Reset
-	 *         - Scratch bit cleared by a cold reset
-	 * [ 5: 5] BIOS Reset Detect
-	 *         - Scratch bit cleared by a cold reset
-	 * [ 6: 6] INIT Detect
-	 *         - Scratch bit cleared by a warm or cold reset not by an INIT
-	 *
-	 */
-	PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
-	/* LDTi Capabilities Registers
-	 * F0:0x80 i = 0,
-	 * F0:0xA0 i = 1,
-	 * F0:0xC0 i = 2,
-	 */
-	/* LDTi Link Control Registrs
-	 * F0:0x84 i = 0,
-	 * F0:0xA4 i = 1,
-	 * F0:0xC4 i = 2,
-	 * [ 1: 1] CRC Flood Enable
-	 *         0 = Do not generate sync packets on CRC error
-	 *         1 = Generate sync packets on CRC error
-	 * [ 2: 2] CRC Start Test (Read-Only)
-	 * [ 3: 3] CRC Force Frame Error
-	 *         0 = Do not generate bad CRC
-	 *         1 = Generate bad CRC
-	 * [ 4: 4] Link Failure
-	 *         0 = No link failure detected
-	 *         1 = Link failure detected
-	 * [ 5: 5] Initialization Complete
-	 *         0 = Initialization not complete
-	 *         1 = Initialization complete
-	 * [ 6: 6] Receiver off
-	 *         0 = Recevier on
-	 *         1 = Receiver off
-	 * [ 7: 7] Transmitter Off
-	 *         0 = Transmitter on
-	 *         1 = Transmitter off
-	 * [ 9: 8] CRC_Error
-	 *         00 = No error
-	 *         [0] = 1 Error on byte lane 0
-	 *         [1] = 1 Error on byte lane 1
-	 * [12:12] Isochrnous Enable  (Read-Only)
-	 * [13:13] HT Stop Tristate Enable
-	 *         0 = Driven during an LDTSTOP_L
-	 *         1 = Tristated during and LDTSTOP_L
-	 * [14:14] Extended CTL Time 
-	 *         0 = CTL is asserted for 16 bit times during link initialization
-	 *         1 = CTL is asserted for 50us during link initialization
-	 * [18:16] Max Link Width In (Read-Only?)
-	 *         000 = 8 bit link
-	 *         001 = 16bit link
-	 * [19:19] Doubleword Flow Control in (Read-Only)
-	 *         0 = This link does not support doubleword flow control
-	 *         1 = This link supports doubleword flow control
-	 * [22:20] Max Link Width Out (Read-Only?)
-	 *         000 = 8 bit link
-	 *         001 = 16bit link
-	 * [23:23] Doubleworld Flow Control out (Read-Only)
-	 *         0 = This link does not support doubleword flow control
-	 *         1 = This link supports doubleworkd flow control
-	 * [26:24] Link Width In
-	 *         000 = Use 8 bits
-	 *         001 = Use 16 bits
-	 *         010 = reserved
-	 *         011 = Use 32 bits
-	 *         100 = Use 2 bits
-	 *         101 = Use 4 bits
-	 *         110 = reserved
-	 *         111 = Link physically not connected
-	 * [27:27] Doubleword Flow Control In Enable
-	 *         0 = Doubleword flow control disabled
-	 *         1 = Doubleword flow control enabled (Not currently supported)
-	 * [30:28] Link Width Out
-	 *         000 = Use 8 bits
-	 *         001 = Use 16 bits
-	 *         010 = reserved
-	 *         011 = Use 32 bits
-	 *         100 = Use 2 bits
-	 *         101 = Use 4 bits
-	 *         110 = reserved
-	 *         111 = Link physically not connected
-	 * [31:31] Doubleworld Flow Control Out Enable
-	 *         0 = Doubleworld flow control disabled
-	 *         1 = Doubleword flow control enabled (Not currently supported)
-	 */
-	PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020,
-	/* LDTi Frequency/Revision Registers
-	 * F0:0x88 i = 0,
-	 * F0:0xA8 i = 1,
-	 * F0:0xC8 i = 2,
-	 * [ 4: 0] Minor Revision
-	 *         Contains the HT Minor revision
-	 * [ 7: 5] Major Revision
-	 *         Contains the HT Major revision
-	 * [11: 8] Link Frequency  (Takes effect the next time the link is reconnected)
-	 *         0000 = 200Mhz
-	 *         0001 = reserved
-	 *         0010 = 400Mhz
-	 *         0011 = reserved
-	 *         0100 = 600Mhz
-	 *         0101 = 800Mhz
-	 *         0110 = 1000Mhz
-	 *         0111 = reserved
-	 *         1000 = reserved
-	 *         1001 = reserved
-	 *         1010 = reserved
-	 *         1011 = reserved
-	 *         1100 = reserved
-	 *         1101 = reserved
-	 *         1110 = reserved
-	 *         1111 = 100 Mhz
-	 * [15:12] Error (Not currently Implemented)
-	 * [31:16] Indicates the frequency capabilities of the link
-	 *         [16] = 1 encoding 0000 of freq supported
-	 *         [17] = 1 encoding 0001 of freq supported
-	 *         [18] = 1 encoding 0010 of freq supported
-	 *         [19] = 1 encoding 0011 of freq supported
-	 *         [20] = 1 encoding 0100 of freq supported
-	 *         [21] = 1 encoding 0101 of freq supported
-	 *         [22] = 1 encoding 0110 of freq supported
-	 *         [23] = 1 encoding 0111 of freq supported
-	 *         [24] = 1 encoding 1000 of freq supported
-	 *         [25] = 1 encoding 1001 of freq supported
-	 *         [26] = 1 encoding 1010 of freq supported
-	 *         [27] = 1 encoding 1011 of freq supported
-	 *         [28] = 1 encoding 1100 of freq supported
-	 *         [29] = 1 encoding 1101 of freq supported
-	 *         [30] = 1 encoding 1110 of freq supported
-	 *         [31] = 1 encoding 1111 of freq supported
-	 */
-	PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200,
-	/* LDTi Feature Capability
-	 * F0:0x8C i = 0,
-	 * F0:0xAC i = 1,
-	 * F0:0xCC i = 2,
-	 */
-	/* LDTi Buffer Count Registers
-	 * F0:0x90 i = 0,
-	 * F0:0xB0 i = 1,
-	 * F0:0xD0 i = 2,
-	 */
-	/* LDTi Bus Number Registers
-	 * F0:0x94 i = 0,
-	 * F0:0xB4 i = 1,
-	 * F0:0xD4 i = 2,
-	 * For NonCoherent HT specifies the bus number downstream (behind the host bridge)
-	 * [ 0: 7] Primary Bus Number
-	 * [15: 8] Secondary Bus Number
-	 * [23:15] Subordiante Bus Number
-	 * [31:24] reserved
-	 */
-	PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000,
-	/* LDTi Type Registers
-	 * F0:0x98 i = 0,
-	 * F0:0xB8 i = 1,
-	 * F0:0xD8 i = 2,
-	 */
-	};
-	int i;
-	int max;
-	print_debug("setting up coherent ht domain....\r\n");
-	max = sizeof(register_values)/sizeof(register_values[0]);
-	for(i = 0; i < max; i += 3) {
-		device_t dev;
-		unsigned where;
-		unsigned long reg;
-#if 0
-		print_debug_hex32(register_values[i]);
-		print_debug(" <-");
-		print_debug_hex32(register_values[i+2]);
-		print_debug("\r\n");
-#endif
-		dev = register_values[i] & ~0xff;
-		where = register_values[i] & 0xff;
-		reg = pci_read_config32(dev, where);
-		reg &= register_values[i+1];
-		reg |= register_values[i+2];
-		pci_write_config32(dev, where, reg);
-#if 0
-		reg = pci_read_config32(register_values[i]);
-		reg &= register_values[i+1];
-		reg |= register_values[i+2] & ~register_values[i+1];
-		pci_write_config32(register_values[i], reg);
-#endif
-	}
-	print_debug("done.\r\n");
-}
-#else
 /* coherent hypertransport initialization for AMD64 
  * written by Stefan Reinauer <stepan@openbios.info>
  * (c) 2003 by SuSE Linux AG
@@ -343,13 +13,12 @@ static void setup_coherent_ht_domain(void)
  *
  */
 
-#if 0
-#include "compat.h"
-#endif
-
 #include <device/pci_def.h>
 #include "arch/romcc_io.h"
 
+/*
+ * 
+ */
 
 /* when generating a temporary row configuration we
  * don't want broadcast to be enabled for that node.
@@ -493,62 +162,6 @@ static bool check_connection(u8 src, u8 dest, u8 link)
 	return 1;
 }
 
-#if 0
-static unsigned int generate_row(u8 node, u8 row, u8 maxnodes)
-{
-	/* Routing Table Node i 
-	 *
-	 * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c 
-	 *  i:    0,    1,    2,    3,    4,    5,    6,    7
-	 *
-	 * [ 0: 3] Request Route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 * [11: 8] Response Route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 * [19:16] Broadcast route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 */
-
-	u32 ret=DEFAULT;
-
-	static const unsigned int rows_2p[2][2] = {
-		{ 0x00050101, 0x00010404 },
-		{ 0x00010404, 0x00050101 }
-	};
-
-	static const unsigned int rows_4p[4][4] = {
-		{ 0x00070101, 0x00010404, 0x00050202, 0x00010402 },
-		{ 0x00010808, 0x000b0101, 0x00010802, 0x00090202 },
-		{ 0x00090202, 0x00010802, 0x000b0101, 0x00010808 },
-		{ 0x00010402, 0x00050202, 0x00010404, 0x00070101 }
-	};
-
-	if (!(node>=maxnodes || row>=maxnodes)) {
-		if (maxnodes==2)
-			ret=rows_2p[node][row];
-		if (maxnodes==4)
-			ret=rows_4p[node][row];
-	}
-
-#if 0
-	printk_spew("generating entry n=%d, r=%d, max=%d - row=%x\n", 
-		node,row,maxnodes,ret);
-#endif
-	
-	return ret;
-}
-#endif
-
-
 static void fill_row(u8 node, u8 row, u32 value)
 {
 #if 0
@@ -835,5 +448,3 @@ static int setup_coherent_ht_domain(void)
 
 	return reset_needed;
 }
-
-#endif