diff options
author | Florian Zumbiehl <florz@florz.de> | 2011-11-01 20:18:29 +0100 |
---|---|---|
committer | Rudolf Marek <r.marek@assembler.cz> | 2011-11-23 01:05:40 +0100 |
commit | fa48b969086216341f77738df4b912859010fcf6 (patch) | |
tree | 6464539fe33c88143e8e2339975949a0111b2402 /src/northbridge/amd/amdk8/raminit.c | |
parent | 85392a8c985b11388efb4a07ef1b1481d9a511e2 (diff) |
k8 raminit: fix bug, improve clock selection, add clock limit for sock754
in amdk8 raminit:
- fix DDR SPD offset for (CLX - 1) (25 instead of 26)
- improve clock/CL selection algorithm
- implement load-dependent clock limiting for socket 754
Change-Id: I5eb8a3e02eaca18f3bef9a98de22f23b23650762
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/377
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Diffstat (limited to 'src/northbridge/amd/amdk8/raminit.c')
-rw-r--r-- | src/northbridge/amd/amdk8/raminit.c | 349 |
1 files changed, 166 insertions, 183 deletions
diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c index 237272c88b..98044d483e 100644 --- a/src/northbridge/amd/amdk8/raminit.c +++ b/src/northbridge/amd/amdk8/raminit.c @@ -1230,8 +1230,8 @@ static long spd_enable_2channels(const struct mem_controller *ctrl, long dimm_ma 17, /* *Logical Banks */ 18, /* *Supported CAS Latencies */ 21, /* *SDRAM Module Attributes */ - 23, /* *Cycle time at CAS Latnecy (CLX - 0.5) */ - 26, /* *Cycle time at CAS Latnecy (CLX - 1.0) */ + 23, /* *Cycle time at CAS Latency (CLX - 0.5) */ + 25, /* *Cycle time at CAS Latency (CLX - 1.0) */ 27, /* *tRP Row precharge time */ 28, /* *Minimum Row Active to Row Active Delay (tRRD) */ 29, /* *tRCD RAS to CAS */ @@ -1301,11 +1301,11 @@ struct mem_param { char name[9]; }; -static const struct mem_param *get_mem_param(unsigned min_cycle_time) +static const struct mem_param *get_mem_param(int freq) { static const struct mem_param speed[] = { - { - .name = "100Mhz", + [NBCAP_MEMCLK_100MHZ] = { + .name = "100MHz", .cycle_time = 0xa0, .divisor = (10 <<1), .tRC = 0x46, @@ -1318,8 +1318,8 @@ static const struct mem_param *get_mem_param(unsigned min_cycle_time) .dtl_trwt = { { 2, 2, 3 }, { 3, 3, 4 }, { 3, 3, 4 }}, .rdpreamble = { ((9 << 1) + 0), ((9 << 1) + 0), ((9 << 1) + 0), ((9 << 1) + 0) } }, - { - .name = "133Mhz", + [NBCAP_MEMCLK_133MHZ] = { + .name = "133MHz", .cycle_time = 0x75, .divisor = (7<<1)+1, .tRC = 0x41, @@ -1332,8 +1332,8 @@ static const struct mem_param *get_mem_param(unsigned min_cycle_time) .dtl_trwt = { { 2, 2, 3 }, { 3, 3, 4 }, { 3, 3, 4 }}, .rdpreamble = { ((8 << 1) + 0), ((7 << 1) + 0), ((7 << 1) + 1), ((7 << 1) + 0) } }, - { - .name = "166Mhz", + [NBCAP_MEMCLK_166MHZ] = { + .name = "166MHz", .cycle_time = 0x60, .divisor = (6<<1), .tRC = 0x3C, @@ -1346,8 +1346,8 @@ static const struct mem_param *get_mem_param(unsigned min_cycle_time) .dtl_trwt = { { 3, 2, 3 }, { 3, 3, 4 }, { 4, 3, 4 }}, .rdpreamble = { ((7 << 1) + 1), ((6 << 1) + 0), ((6 << 1) + 1), ((6 << 1) + 0) } }, - { - .name = "200Mhz", + [NBCAP_MEMCLK_200MHZ] = { + .name = "200MHz", .cycle_time = 0x50, .divisor = (5<<1), .tRC = 0x37, @@ -1359,20 +1359,11 @@ static const struct mem_param *get_mem_param(unsigned min_cycle_time) .dtl_twtr = 2, .dtl_trwt = { { 0, 2, 3 }, { 3, 3, 4 }, { 3, 3, 4 }}, .rdpreamble = { ((7 << 1) + 0), ((5 << 1) + 0), ((5 << 1) + 1), ((5 << 1) + 1) } - }, - { - .cycle_time = 0x00, - }, + } }; const struct mem_param *param; - for (param = &speed[0]; param->cycle_time ; param++) { - if (min_cycle_time > (param+1)->cycle_time) { - break; - } - } - if (!param->cycle_time) { - die("min_cycle_time to low"); - } + + param = speed + freq; printk(BIOS_SPEW, "%s\n", param->name); return param; } @@ -1382,18 +1373,11 @@ struct spd_set_memclk_result { long dimm_mask; }; -static const unsigned char min_cycle_times[] = { - [NBCAP_MEMCLK_200MHZ] = 0x50, /* 5ns */ - [NBCAP_MEMCLK_166MHZ] = 0x60, /* 6ns */ - [NBCAP_MEMCLK_133MHZ] = 0x75, /* 7.5ns */ - [NBCAP_MEMCLK_100MHZ] = 0xa0, /* 10ns */ -}; +static int spd_dimm_loading_socket(const struct mem_controller *ctrl, long dimm_mask, int *freq_1t) +{ #if CONFIG_CPU_AMD_SOCKET_939 -/* return the minimum cycle time and set 2T accordingly */ -static unsigned int spd_dimm_loading_socket939(const struct mem_controller *ctrl, long dimm_mask) { - /* + 1 raise so we detect 0 as bad field */ #define DDR200 (NBCAP_MEMCLK_100MHZ + 1) #define DDR333 (NBCAP_MEMCLK_166MHZ + 1) @@ -1457,7 +1441,7 @@ static unsigned int spd_dimm_loading_socket939(const struct mem_controller *ctrl }; /*The dpos matches channel positions defined in BKDG and above arrays The rpos is bitmask of dual rank dimms in same order as dpos */ - unsigned int dloading = 0, dloading_cycle_time, i, rpos = 0, dpos =0; + unsigned int dloading = 0, i, rpos = 0, dpos = 0; const unsigned char (*dimm_loading_config)[16] = dimm_loading_config_revE; int rank; uint32_t dcl; @@ -1491,8 +1475,6 @@ static unsigned int spd_dimm_loading_socket939(const struct mem_controller *ctrl #endif hw_error: if (dloading != 0) { - /* map it back to cycle load times */ - dloading_cycle_time = min_cycle_times[dloading - 1]; /* we have valid combination check the restrictions */ dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); dcl |= (dimm_loading_config[dpos][rpos] & DDR_2T) ? (DCL_En2T) : 0; @@ -1502,189 +1484,190 @@ hw_error: dcl |= DCL_DualDIMMen; } pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + return dloading - 1; } else { /* if we don't find it we se it to DDR400 */ printk(BIOS_WARNING, "Detected strange DIMM configuration, may not work! (or bug)\n"); - dloading_cycle_time = min_cycle_times[NBCAP_MEMCLK_200MHZ]; + return NBCAP_MEMCLK_200MHZ; + } + +#elif CONFIG_CPU_AMD_SOCKET_754 + +#define CFGIDX(DIMM1,DIMM2,DIMM3) ((DIMM3)*9+(DIMM2)*3+(DIMM1)) + +#define EMPTY 0 +#define X8S_X16 1 +#define X8D 2 + +#define DDR200 NBCAP_MEMCLK_100MHZ +#define DDR333 NBCAP_MEMCLK_166MHZ +#define DDR400 NBCAP_MEMCLK_200MHZ + + /* this is table 42 from the BKDG, ignoring footnote 4, + * with the EMPTY, EMPTY, EMPTY row added */ + static const unsigned char cfgtable[][2] = { + [CFGIDX(EMPTY, EMPTY, EMPTY )] = { DDR400, DDR400 }, + [CFGIDX(X8S_X16, EMPTY, EMPTY )] = { DDR400, DDR400 }, + [CFGIDX(EMPTY, X8S_X16, EMPTY )] = { DDR400, DDR400 }, + [CFGIDX(EMPTY, EMPTY, X8S_X16 )] = { DDR400, DDR400 }, + [CFGIDX(X8D, EMPTY, EMPTY )] = { DDR400, DDR400 }, + [CFGIDX(EMPTY, X8D, EMPTY )] = { DDR400, DDR400 }, + [CFGIDX(EMPTY, EMPTY, X8D )] = { DDR400, DDR400 }, + [CFGIDX(X8S_X16, X8S_X16, EMPTY )] = { DDR400, DDR400 }, + [CFGIDX(X8S_X16, X8D, EMPTY )] = { DDR400, DDR400 }, + [CFGIDX(X8S_X16, EMPTY, X8S_X16 )] = { DDR400, DDR400 }, + [CFGIDX(X8S_X16, EMPTY, X8D )] = { DDR400, DDR400 }, + [CFGIDX(X8D, X8S_X16, EMPTY )] = { DDR400, DDR400 }, + [CFGIDX(X8D, X8D, EMPTY )] = { DDR333, DDR333 }, + [CFGIDX(X8D, EMPTY, X8S_X16 )] = { DDR400, DDR400 }, + [CFGIDX(X8D, EMPTY, X8D )] = { DDR333, DDR333 }, + [CFGIDX(EMPTY, X8S_X16, X8S_X16 )] = { DDR333, DDR400 }, + [CFGIDX(EMPTY, X8S_X16, X8D )] = { DDR200, DDR400 }, + [CFGIDX(EMPTY, X8D, X8S_X16 )] = { DDR200, DDR400 }, + [CFGIDX(EMPTY, X8D, X8D )] = { DDR200, DDR333 }, + [CFGIDX(X8S_X16, X8S_X16, X8S_X16 )] = { DDR333, DDR400 }, + [CFGIDX(X8S_X16, X8S_X16, X8D )] = { DDR200, DDR333 }, + [CFGIDX(X8S_X16, X8D, X8S_X16 )] = { DDR200, DDR333 }, + [CFGIDX(X8S_X16, X8D, X8D )] = { DDR200, DDR333 }, + [CFGIDX(X8D, X8S_X16, X8S_X16 )] = { DDR333, DDR333 }, + [CFGIDX(X8D, X8S_X16, X8D )] = { DDR200, DDR333 }, + [CFGIDX(X8D, X8D, X8S_X16 )] = { DDR200, DDR333 }, + [CFGIDX(X8D, X8D, X8D )] = { DDR200, DDR333 } + }; + + int i, rank, width, dimmtypes[3]; + const unsigned char *cfg; + + for (i = 0; i < 3; i++) { + if (dimm_mask & (1 << i)) { + rank = spd_read_byte(ctrl->channel0[i], 5); + width = spd_read_byte(ctrl->channel0[i], 13); + if (rank < 0 || width < 0) die("failed to read SPD"); + width &= 0x7f; + /* this is my guess as to how the criteria in the table + * are to be understood: + */ + dimmtypes[i] = width >= (rank == 1 ? 8 : 16) ? X8S_X16 : X8D; + } else { + dimmtypes[i] = EMPTY; + } } + cfg = cfgtable[CFGIDX(dimmtypes[0], dimmtypes[1], dimmtypes[2])]; + *freq_1t = cfg[0]; + return is_cpu_c0() ? cfg[0] : cfg[1]; - return dloading_cycle_time; -} +#else /* CONFIG_CPU_AMD_SOCKET_* */ + +/* well, there are socket 940 boards supported which obviously fail to + * compile with this */ +// #error load dependent memory clock limiting is not implemented for this socket + + /* see BKDG 4.1.3--if you just want to test a setup that doesn't + * require limiting, you may use the following code */ + + *freq_1t = NBCAP_MEMCLK_200MHZ; + return NBCAP_MEMCLK_200MHZ; -#endif /* #if CONFIG_CPU_AMD_SOCKET_939 */ +#endif /* CONFIG_CPU_AMD_SOCKET_* */ + +} static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller *ctrl, long dimm_mask) { - /* Compute the minimum cycle time for these dimms */ struct spd_set_memclk_result result; - unsigned min_cycle_time, min_latency, bios_cycle_time; -#if CONFIG_CPU_AMD_SOCKET_939 - unsigned dloading_cycle_time; -#endif - int i; + unsigned char cl_at_freq[NBCAP_MEMCLK_MASK + 1]; + int dimm, freq, max_freq_bios, max_freq_dloading, max_freq_1t; uint32_t value; - static const uint8_t latency_indicies[] = { 26, 23, 9 }; - - value = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); - - min_cycle_time = min_cycle_times[(value >> NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK]; - bios_cycle_time = min_cycle_times[ - read_option(max_mem_clock, 0)]; - if (bios_cycle_time > min_cycle_time) { - min_cycle_time = bios_cycle_time; - } - min_latency = 2; + static const uint8_t spd_min_cycle_time_indices[] = { 9, 23, 25 }; + static const unsigned char cycle_time_at_freq[] = { + [NBCAP_MEMCLK_200MHZ] = 0x50, /* 5ns */ + [NBCAP_MEMCLK_166MHZ] = 0x60, /* 6ns */ + [NBCAP_MEMCLK_133MHZ] = 0x75, /* 7.5ns */ + [NBCAP_MEMCLK_100MHZ] = 0xa0, /* 10ns */ + }; - /* Compute the least latency with the fastest clock supported - * by both the memory controller and the dimms. + /* BEWARE that the constants for frequencies order in reverse of what + * would be intuitive. 200 MHz has the lowest constant, 100 MHz the + * highest. Thus, all comparisons and traversal directions having to + * do with frequencies are/have to be the opposite of what would be + * intuitive. */ - for (i = 0; i < DIMM_SOCKETS; i++) { - int new_cycle_time, new_latency; - int index; - int latencies; - int latency; - if (!(dimm_mask & (1 << i))) { + /* the CLs supported by the controller: */ + memset(cl_at_freq, 0x1c, sizeof(cl_at_freq)); + memset(cl_at_freq, 0x00, + (pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP) >> + NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK); + max_freq_bios = read_option(max_mem_clock, 0); + if (max_freq_bios <= NBCAP_MEMCLK_100MHZ) + memset(cl_at_freq, 0x00, max_freq_bios); + for (dimm = 0; dimm < DIMM_SOCKETS; dimm++) { + int x,i,spd_cls,cl,spd_min_cycle_time; + unsigned char cl_at_freq_mask[sizeof(cl_at_freq)]; + + if (!(dimm_mask & (1 << dimm))) continue; - } - - /* First find the supported CAS latencies - * Byte 18 for DDR SDRAM is interpreted: + /* Byte 18 for DDR SDRAM is interpreted: * bit 0 == CAS Latency = 1.0 * bit 1 == CAS Latency = 1.5 * bit 2 == CAS Latency = 2.0 * bit 3 == CAS Latency = 2.5 * bit 4 == CAS Latency = 3.0 * bit 5 == CAS Latency = 3.5 - * bit 6 == TBD + * bit 6 == CAS Latency = 4.0 * bit 7 == TBD */ - new_cycle_time = 0xa0; - new_latency = 5; - - latencies = spd_read_byte(ctrl->channel0[i], 18); - if (latencies <= 0) continue; - - /* Compute the lowest cas latency supported */ - latency = log2(latencies) -2; - - /* Loop through and find a fast clock with a low latency */ - for (index = 0; index < 3; index++, latency++) { - int spd_value; - if ((latency < 2) || (latency > 4) || - (!(latencies & (1 << latency)))) { + spd_cls = spd_read_byte(ctrl->channel0[dimm], 18); + if (spd_cls <= 0) + goto hw_error; + memset(cl_at_freq_mask, 0x00, sizeof(cl_at_freq_mask)); + for (cl = 1 << log2(spd_cls), i = 0; i < 3; cl >>= 1, i++) { + if (!(spd_cls & cl)) continue; - } - spd_value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]); - if (spd_value < 0) { + spd_min_cycle_time = spd_read_byte(ctrl->channel0[dimm], + spd_min_cycle_time_indices[i]); + if (spd_min_cycle_time < 0) goto hw_error; - } - - /* Only increase the latency if we decreas the clock */ - if ((spd_value >= min_cycle_time) && (spd_value < new_cycle_time)) { - new_cycle_time = spd_value; - new_latency = latency; - } - } - if (new_latency > 4){ - continue; - } - /* Does min_latency need to be increased? */ - if (new_cycle_time > min_cycle_time) { - min_cycle_time = new_cycle_time; - } - /* Does min_cycle_time need to be increased? */ - if (new_latency > min_latency) { - min_latency = new_latency; - } - } - /* Make a second pass through the dimms and disable - * any that cannot support the selected memclk and cas latency. - */ - - for (i = 0; (i < 4) && (ctrl->channel0[i]); i++) { - int latencies; - int latency; - int index; - int spd_value; - if (!(dimm_mask & (1 << i))) { - continue; - } - - latencies = spd_read_byte(ctrl->channel0[i], 18); - if (latencies < 0) goto hw_error; - if (latencies == 0) { - goto dimm_err; - } - - /* Compute the lowest cas latency supported */ - latency = log2(latencies) -2; - - /* Walk through searching for the selected latency */ - for (index = 0; index < 3; index++, latency++) { - if (!(latencies & (1 << latency))) { + if ((!spd_min_cycle_time) || (spd_min_cycle_time & 0x0f) > 9) continue; - } - if (latency == min_latency) - break; - } - /* If I can't find the latency or my index is bad error */ - if ((latency != min_latency) || (index >= 3)) { - goto dimm_err; + for (x = 0; x < sizeof(cl_at_freq_mask); x++) + if (cycle_time_at_freq[x] >= spd_min_cycle_time) + cl_at_freq_mask[x] |= cl; } + for (x = 0; x < sizeof(cl_at_freq_mask); x++) + cl_at_freq[x] &= cl_at_freq_mask[x]; + } - /* Read the min_cycle_time for this latency */ - spd_value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]); - if (spd_value < 0) goto hw_error; + freq = NBCAP_MEMCLK_200MHZ; + while (freq < sizeof(cl_at_freq) && !cl_at_freq[freq]) + freq++; - /* All is good if the selected clock speed - * is what I need or slower. - */ - if (spd_value <= min_cycle_time) { - continue; - } - /* Otherwise I have an error, disable the dimm */ - dimm_err: - dimm_mask = disable_dimm(ctrl, i, dimm_mask); + max_freq_dloading = spd_dimm_loading_socket(ctrl, dimm_mask, &max_freq_1t); + if (max_freq_dloading > freq) { + printk(BIOS_WARNING, "Memory speed reduced due to signal loading conditions\n"); + freq = max_freq_dloading; + while (freq < sizeof(cl_at_freq) && !cl_at_freq[freq]) + freq++; } -#if 0 -//down speed for full load 4 rank support -#if CONFIG_QRANK_DIMM_SUPPORT - if (dimm_mask == (3|(3<<DIMM_SOCKETS)) ) { - int ranks = 4; - for (i = 0; (i < 4) && (ctrl->channel0[i]); i++) { - int val; - if (!(dimm_mask & (1 << i))) { - continue; - } - val = spd_read_byte(ctrl->channel0[i], 5); - if (val!=ranks) { - ranks = val; - break; - } - } - if (ranks==4) { - if (min_cycle_time <= 0x50 ) { - min_cycle_time = 0x60; - } - } - } -#endif -#endif + /* if the next lower frequency gives a CL at least one whole cycle + * shorter, select that (see end of BKDG 4.1.1.1) */ + if (freq < sizeof(cl_at_freq)-1 && cl_at_freq[freq+1] && + log2f(cl_at_freq[freq]) - log2f(cl_at_freq[freq+1]) >= 2) + freq++; -#if CONFIG_CPU_AMD_SOCKET_939 - dloading_cycle_time = spd_dimm_loading_socket939(ctrl, dimm_mask); - if (dloading_cycle_time > min_cycle_time) { - min_cycle_time = dloading_cycle_time; - printk(BIOS_WARNING, "Memory speed reduced due to signal loading conditions\n"); + if (freq == sizeof(cl_at_freq)) + goto hw_error; + +#if CONFIG_CPU_AMD_SOCKET_754 + if (freq < max_freq_1t) { + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, + pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW) | DCL_En2T); } #endif - - /* Now that I know the minimum cycle time lookup the memory parameters */ - result.param = get_mem_param(min_cycle_time); + result.param = get_mem_param(freq); /* Update DRAM Config High with our selected memory speed */ value = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); @@ -1706,7 +1689,7 @@ static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller * /* Update DRAM Timing Low with our selected cas latency */ value = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); value &= ~(DTL_TCL_MASK << DTL_TCL_SHIFT); - value |= latencies[min_latency - 2] << DTL_TCL_SHIFT; + value |= latencies[log2f(cl_at_freq[freq]) - 2] << DTL_TCL_SHIFT; pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, value); result.dimm_mask = dimm_mask; |