diff options
author | Yinghai Lu <yinghailu@gmail.com> | 2006-10-04 20:46:15 +0000 |
---|---|---|
committer | Yinghai Lu <yinghailu@gmail.com> | 2006-10-04 20:46:15 +0000 |
commit | d4b278c02c1da92219ebeb34204b9768934aeca3 (patch) | |
tree | 488d097cac9744cfc9b8ff7c89ce69bcb21370cb /src/northbridge/amd/amdk8/incoherent_ht.c | |
parent | 2e3757d11c565a8fe68dc2a2c34975e98304533c (diff) |
AMD Rev F support
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/amd/amdk8/incoherent_ht.c')
-rw-r--r-- | src/northbridge/amd/amdk8/incoherent_ht.c | 298 |
1 files changed, 147 insertions, 151 deletions
diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c index b07c62a5dc..012caf1501 100644 --- a/src/northbridge/amd/amdk8/incoherent_ht.c +++ b/src/northbridge/amd/amdk8/incoherent_ht.c @@ -1,11 +1,8 @@ /* - * incoherent hypertransport enumeration - * originally written by Eric Biederman - * - * 2004.12 yhlu add multi ht chain dynamically support - * 2005.11 yhlu add let real sb to use small unitid - * 2006.03 stepan cleanups - */ + This should be done by Eric + 2004.12 yhlu add multi ht chain dynamically support + 2005.11 yhlu add let real sb to use small unitid +*/ #include <device/pci_def.h> #include <device/pci_ids.h> #include <device/hypertransport_def.h> @@ -22,10 +19,7 @@ #define K8_ALLOCATE_IO_RANGE 0 #endif -/* Do we need to allocate MMIO? Currently we direct the last 64M - * to the southbridge link only. We have to remain access to the - * 4G-4M range for the southbridge (Flash ROM) - */ +// Do we need allocate MMIO? Current We direct last 64M to sblink only, We can not lose access to last 4M range to ROM #ifndef K8_ALLOCATE_MMIO_RANGE #define K8_ALLOCATE_MMIO_RANGE 0 #endif @@ -55,9 +49,7 @@ static uint8_t ht_lookup_capability(device_t dev, uint16_t val) if (pos > PCI_CAP_LIST_NEXT) { pos = pci_read_config8(dev, pos); } - - /* loop through the linked list */ - while(pos != 0) { + while(pos != 0) { /* loop through the linked list */ uint8_t cap; cap = pci_read_config8(dev, pos + PCI_CAP_LIST_ID); if (cap == PCI_CAP_ID_HT) { @@ -89,7 +81,7 @@ static void ht_collapse_previous_enumeration(uint8_t bus, unsigned offset_unitid device_t dev; uint32_t id; - // actually, only for one HT device HT chain, and unitid is 0 + //actually, only for one HT device HT chain, and unitid is 0 #if HT_CHAIN_UNITID_BASE == 0 if(offset_unitid) { return; @@ -158,9 +150,11 @@ static uint16_t ht_read_freq_cap(device_t dev, uint8_t pos) /* AMD K8 Unsupported 1Ghz? */ if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) { #if K8_HT_FREQ_1G_SUPPORT == 1 + #if K8_REV_F_SUPPORT == 0 if (is_cpu_pre_e0()) { // only E0 later support 1GHz freq_cap &= ~(1 << HT_FREQ_1000Mhz); } + #endif #else freq_cap &= ~(1 << HT_FREQ_1000Mhz); #endif @@ -268,33 +262,22 @@ static int ht_optimize_link( return needs_reset; } - #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1) #if RAMINIT_SYSINFO == 1 -static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, - unsigned offset_unitid, struct sys_info *sysinfo); - -static int scan_pci_bus(unsigned bus, struct sys_info *sysinfo) +static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid, struct sys_info *sysinfo); +static int scan_pci_bus( unsigned bus , struct sys_info *sysinfo) #else -static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, - unsigned offset_unitid); - -static int scan_pci_bus(unsigned bus) +static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid); +static int scan_pci_bus( unsigned bus) #endif { - /* Here we already can access PCI_DEV(bus, 0, 0) to - * PCI_DEV(bus, 0x1f, 0x7). - * - * So scan these devices to find out whether there are more bridges. - * - * - If we find a pci bridge, set the bus number in the bridge, and - * continue with the next device. - * - * - For hypertransport bridges, set the bus number in the bridge and - * call ht_setup_chainx(), and scan_pci_bus() - * - */ + /* + here we already can access PCI_DEV(bus, 0, 0) to PCI_DEV(bus, 0x1f, 0x7) + So We can scan these devices to find out if they are bridge + If it is pci bridge, We need to set busn in bridge, and go on + For ht bridge, We need to set the busn in bridge and ht_setup_chainx, and the scan_pci_bus + */ unsigned int devfn; unsigned new_bus; unsigned max_bus; @@ -356,18 +339,12 @@ static int scan_pci_bus(unsigned bus) ((unsigned int) max_bus << 16)); pci_write_config32(dev, PCI_PRIMARY_BUS, buses); - /* Here we need to figure out if dev is a ht - * bridge. If it is, we need to call - * ht_setup_chainx() first - * - * Not verified --- yhlu - */ - - uint8_t upos; // is this valid C? - - // one func one ht sub - upos = ht_lookup_host_capability(dev); - + /* here we need to figure out if dev is a ht bridge + if it is ht bridge, we need to call ht_setup_chainx at first + Not verified --- yhlu + */ + uint8_t upos; + upos = ht_lookup_host_capability(dev); // one func one ht sub if (upos) { // sub ht chain uint8_t busn; busn = (new_bus & 0xff); @@ -390,7 +367,7 @@ static int scan_pci_bus(unsigned bus) buses = (buses & 0xff00ffff) | ((unsigned int) (new_bus & 0xff) << 16); - pci_write_config32(dev, PCI_PRIMARY_BUS, buses); + pci_write_config32(dev, PCI_PRIMARY_BUS, buses); pci_write_config16(dev, PCI_COMMAND, cr); @@ -405,7 +382,6 @@ static int scan_pci_bus(unsigned bus) * time probing another function. * Skip to next device. */ - if ( ((devfn & 0x07) == 0x00) && ((hdr_type & 0x80) != 0x80)) { devfn += 0x07; @@ -422,9 +398,7 @@ static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned o static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid) #endif { - // execute this function even with HT_CHAIN_UNITID_BASE == 0, - // because of the end_of_chain check, and we need it to - // optimize the links + //even HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link uint8_t next_unitid, last_unitid; unsigned uoffs; @@ -434,8 +408,7 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of #endif #if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE - // record the device id of last ht device, so we can set the - // unit id to HT_CHAIN_END_UNITID_BASE + //let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE unsigned real_last_unitid; uint8_t real_last_pos; int ht_dev_num = 0; @@ -519,17 +492,15 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of next_unitid += count; - /* Find which side of the ht link we are on, by reading - * which direction our last write to PCI_CAP_FLAGS came - * from. + /* Find which side of the ht link we are on, + * by reading which direction our last write to PCI_CAP_FLAGS + * came from. */ flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS; #if RAMINIT_SYSINFO == 1 - /* store the link pair here and we will setup the - * Hypertransport link later, after we get final FID/VID - */ + /* store the link pair here and we will Setup the Hypertransport link later, after we get final FID/VID */ { struct link_pair_st *link_pair = &sysinfo->link_pair[sysinfo->link_pair_num]; link_pair->udev = udev; @@ -544,7 +515,7 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs); #endif - /* Remember the location of the last device */ + /* Remeber the location of the last device */ udev = dev; upos = pos; uoffs = ( offs != PCI_HT_SLAVE0_OFFS ) ? PCI_HT_SLAVE0_OFFS : PCI_HT_SLAVE1_OFFS; @@ -586,8 +557,6 @@ end_of_chain: ; } - - #if RAMINIT_SYSINFO == 1 static void ht_setup_chain(device_t udev, unsigned upos, struct sys_info *sysinfo) #else @@ -618,10 +587,7 @@ static int ht_setup_chain(device_t udev, unsigned upos) return ht_setup_chainx(udev, upos, 0, offset_unitid); #endif } - - -static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, - uint8_t linkt, uint8_t val) +static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt, uint8_t val) { uint32_t dword, dword_old; uint8_t link_type; @@ -630,17 +596,16 @@ static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, dword = pci_read_config32(PCI_DEV(0,0x18+node,0), 0x98 + (linkn * 0x20)); link_type = dword & 0xff; - dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,3), 0xdc); - /* coherent link only linkt = 3, non coherent = 7*/ - if ( (link_type & 7) == linkt ) { + if ( (link_type & 7) == linkt ) { /* Coherent Link only linkt = 3, ncoherent = 7*/ + dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,3), 0xdc); dword &= ~( 0xff<<(linkn *8) ); dword |= val << (linkn *8); - } - if (dword != dword_old) { - pci_write_config32(PCI_DEV(0,0x18+node,3), 0xdc, dword); - return 1; + if (dword != dword_old) { + pci_write_config32(PCI_DEV(0,0x18+node,3), 0xdc, dword); + return 1; + } } return 0; @@ -658,14 +623,22 @@ static int optimize_link_read_pointers_chain(uint8_t ht_c_num) uint8_t nodeid, linkn; uint8_t busn; uint8_t val; + unsigned devn = 1; + + #if HT_CHAIN_UNITID_BASE != 1 + #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + if(i==0) // to check if it is sb ht chain + #endif + devn = HT_CHAIN_UNITID_BASE; + #endif reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4); nodeid = ((reg & 0xf0)>>4); // nodeid linkn = ((reg & 0xf00)>>8); // link n busn = (reg & 0xff0000)>>16; //busn - - reg = pci_read_config32( PCI_DEV(busn, 1, 0), PCI_VENDOR_ID); + + reg = pci_read_config32( PCI_DEV(busn, devn, 0), PCI_VENDOR_ID); // ? the chain dev maybe offseted if ( (reg & 0xffff) == PCI_VENDOR_ID_AMD) { val = 0x25; } else if ( (reg & 0xffff) == PCI_VENDOR_ID_NVIDIA ) { @@ -681,18 +654,79 @@ static int optimize_link_read_pointers_chain(uint8_t ht_c_num) return reset_needed; } +static int set_ht_link_buffer_count(uint8_t node, uint8_t linkn, uint8_t linkt, unsigned val) +{ + uint32_t dword; + uint8_t link_type; + unsigned regpos; + device_t dev; + + /* This works on an Athlon64 because unimplemented links return 0 */ + regpos = 0x98 + (linkn * 0x20); + dev = PCI_DEV(0,0x18+node,0); + dword = pci_read_config32(dev, regpos); + link_type = dword & 0xff; + + if ( (link_type & 0x7) == linkt ) { /* Coherent Link only linkt = 3, ncoherent = 7*/ + regpos = 0x90 + (linkn * 0x20); + dword = pci_read_config32(dev, regpos ); + + if (dword != val) { + pci_write_config32(dev, regpos, val); + return 1; + } + } + + return 0; +} +static int set_ht_link_buffer_counts_chain(uint8_t ht_c_num, unsigned vendorid, unsigned val) +{ + int reset_needed; + uint8_t i; + + reset_needed = 0; + + for (i = 0; i < ht_c_num; i++) { + uint32_t reg; + uint8_t nodeid, linkn; + uint8_t busn; + unsigned devn = 1; + + #if HT_CHAIN_UNITID_BASE != 1 + #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + if(i==0) // to check if it is sb ht chain + #endif + devn = HT_CHAIN_UNITID_BASE; + #endif + + reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4); + if((reg & 3) != 3) continue; // not enabled + + nodeid = ((reg & 0xf0)>>4); // nodeid + linkn = ((reg & 0xf00)>>8); // link n + busn = (reg & 0xff0000)>>16; //busn + + reg = pci_read_config32( PCI_DEV(busn, devn, 0), PCI_VENDOR_ID); //1? + if ( (reg & 0xffff) == vendorid ) { + reset_needed |= set_ht_link_buffer_count(nodeid, linkn, 0x07,val); + } + } + + return reset_needed; +} + + #if RAMINIT_SYSINFO == 1 static void ht_setup_chains(uint8_t ht_c_num, struct sys_info *sysinfo) #else static int ht_setup_chains(uint8_t ht_c_num) #endif { - /* Assumption: The HT chain that is bus 0 has the HT I/O Hub on it. - * On most boards this just happens. If a cpu has multiple - * non coherent links the appropriate bus registers for the + /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it. + * On most boards this just happens. If a cpu has multiple + * non Coherent links the appropriate bus registers for the * links needs to be programed to point at bus 0. */ - uint8_t upos; device_t udev; uint8_t i; @@ -717,14 +751,9 @@ static int ht_setup_chains(uint8_t ht_c_num) reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4); - // We need to setup 0x94, 0xb4, and 0xd4 according to reg - - // nodeid; it will decide 0x18 or 0x19 - devpos = ((reg & 0xf0)>>4)+0x18; - - // link n; it will decide 0x94 or 0xb4, 0x0xd4; - regpos = ((reg & 0xf00)>>8) * 0x20 + 0x94; - + //We need setup 0x94, 0xb4, and 0xd4 according to the reg + devpos = ((reg & 0xf0)>>4)+0x18; // nodeid; it will decide 0x18 or 0x19 + regpos = ((reg & 0xf00)>>8) * 0x20 + 0x94; // link n; it will decide 0x94 or 0xb4, 0x0xd4; busn = (reg & 0xff0000)>>16; dword = pci_read_config32( PCI_DEV(0, devpos, 0), regpos) ; @@ -753,15 +782,12 @@ static int ht_setup_chains(uint8_t ht_c_num) #endif #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1) - /* You can not use use this in romcc, because recursive - * function calls in romcc will kill you - */ + /* You can use use this in romcc, because there is function call in romcc, recursive will kill you */ bus = busn; // we need 32 bit #if RAMINIT_SYSINFO == 1 scan_pci_bus(bus, sysinfo); #else - // take out reset_needed that is stored in upword - reset_needed |= (scan_pci_bus(bus)>>16); + reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword #endif #endif } @@ -774,11 +800,9 @@ static int ht_setup_chains(uint8_t ht_c_num) } -static inline unsigned get_nodes(void) -{ - return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; -} - +#if defined (__GNUC__) +static inline unsigned get_nodes(void); +#endif #if RAMINIT_SYSINFO == 1 static void ht_setup_chains_x(struct sys_info *sysinfo) @@ -803,15 +827,14 @@ static int ht_setup_chains_x(void) /* update PCI_DEV(0, 0x18, 1) 0xe0 to 0x05000m03, and next_busn=0x3f+1 */ print_linkn_in("SBLink=", ((reg>>8) & 3) ); #if RAMINIT_SYSINFO == 1 - sysinfo->sblnk = (reg>>8) & 3; + sysinfo->sblk = (reg>>8) & 3; sysinfo->sbbusn = 0; sysinfo->nodes = nodes; #endif tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (0x3f<<24); pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0, tempreg); - /* 0 will be used ht chain with SB we need to keep SB in bus 0 in auto stage */ - next_busn=0x3f+1; + next_busn=0x3f+1; /* 0 will be used ht chain with SB we need to keep SB in bus0 in auto stage*/ #if K8_ALLOCATE_IO_RANGE == 1 /* io range allocation */ @@ -825,9 +848,12 @@ static int ht_setup_chains_x(void) /* clean others */ for(ht_c_num=1;ht_c_num<4; ht_c_num++) { pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, 0); + +#if K8_ALLOCATE_IO_RANGE == 1 /* io range allocation */ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc4 + ht_c_num * 8, 0); pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc0 + ht_c_num * 8, 0); +#endif } for(nodeid=0; nodeid<nodes; nodeid++) { @@ -836,67 +862,38 @@ static int ht_setup_chains_x(void) dev = PCI_DEV(0, 0x18+nodeid,0); for(linkn = 0; linkn<3; linkn++) { unsigned regpos; - regpos = 0x98 + 0x20 * linkn; reg = pci_read_config32(dev, regpos); - - /* skip if link is non conherent or not connected*/ - if ((reg & 0x17) != 7) continue; - - print_linkn_in("NC node|link=", - ((nodeid & 0xf)<<4)|(linkn & 0xf)); - + if ((reg & 0x17) != 7) continue; /* it is not non conherent or not connected*/ + print_linkn_in("NC node|link=", ((nodeid & 0xf)<<4)|(linkn & 0xf)); tempreg = 3 | (nodeid <<4) | (linkn<<8); - - /* compare (temp & 0xffff) with - * (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff) - */ + /*compare (temp & 0xffff), with (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff) */ for(ht_c_num=0;ht_c_num<4; ht_c_num++) { - reg = pci_read_config32( PCI_DEV(0, 0x18, 1), - 0xe0 + ht_c_num * 4); - - if ( ((reg & 0xffff) == (tempreg & 0xffff)) - || ((reg & 0xffff) == 0x0000) ) { - /*we got it*/ + reg = pci_read_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4); + if(((reg & 0xffff) == (tempreg & 0xffff)) || ((reg & 0xffff) == 0x0000)) { /*we got it*/ break; } } - - /* used up the maximum allowed 4 non conherent links */ - if(ht_c_num == 4) break; - - /* update to 0xe0...*/ - if((reg & 0xf) == 3) continue; /* SbLink so don't touch it */ - + if(ht_c_num == 4) break; /*used up only 4 non conherent allowed*/ + /*update to 0xe0...*/ + if((reg & 0xf) == 3) continue; /*SbLink so don't touch it */ print_linkn_in("\tbusn=", next_busn); - tempreg |= (next_busn<<16)|((next_busn+0x3f)<<24); - pci_write_config32(PCI_DEV(0, 0x18, 1), - 0xe0 + ht_c_num * 4, tempreg); - + pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, tempreg); next_busn+=0x3f+1; #if K8_ALLOCATE_IO_RANGE == 1 /* io range allocation */ - - // limit - tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); - pci_write_config32( PCI_DEV(0, 0x18, 1), - 0xC4 + ht_c_num * 8, tempreg); - - // base :ISA and VGA ? - tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); - pci_write_config32(PCI_DEV(0, 0x18, 1), - 0xC0 + ht_c_num * 8, tempreg); - + tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); //limit + pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4 + ht_c_num * 8, tempreg); + tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); //base :ISA and VGA ? + pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC0 + ht_c_num * 8, tempreg); next_io_base += 0x3+0x1; #endif + } } - - /* update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) - * to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1); - */ + /*update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1);*/ for(nodeid = 1; nodeid<nodes; nodeid++) { int i; @@ -938,6 +935,7 @@ static int ht_setup_chains_x(void) #if RAMINIT_SYSINFO == 1 sysinfo->ht_c_num = i; ht_setup_chains(i, sysinfo); + sysinfo->sbdn = get_sbdn(sysinfo->sbbusn); #else return ht_setup_chains(i); #endif @@ -947,7 +945,7 @@ static int ht_setup_chains_x(void) #if RAMINIT_SYSINFO == 1 static int optimize_link_incoherent_ht(struct sys_info *sysinfo) { - // We need to use the recorded link pair info to optimize the link + // We need to use recorded link pair info to optimize the link int i; int reset_needed = 0; @@ -955,12 +953,10 @@ static int optimize_link_incoherent_ht(struct sys_info *sysinfo) for(i=0; i< link_pair_num; i++) { struct link_pair_st *link_pair= &sysinfo->link_pair[i]; - reset_needed |= ht_optimize_link(link_pair->udev, - link_pair->upos, link_pair->uoffs, - link_pair->dev, link_pair->pos, link_pair->offs); + reset_needed |= ht_optimize_link(link_pair->udev, link_pair->upos, link_pair->uoffs, link_pair->dev, link_pair->pos, link_pair->offs); } - reset_needed |= optimize_link_read_pointers(sysinfo->ht_c_num); + reset_needed |= optimize_link_read_pointers_chain(sysinfo->ht_c_num); return reset_needed; |