summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorArthur Heymans <arthur@aheymans.xyz>2022-03-07 17:39:53 +0100
committerFelix Held <felix-coreboot@felixheld.de>2022-10-20 14:49:36 +0000
commitf5575315fd628131adf1c237fd4a99996abfae59 (patch)
tree478b431534019ab395f1b72085f3f94517c4b121 /src/mainboard
parentbf71c7292af27c54e1824f9360a3381ff31908cb (diff)
mb/prodrive/hermes: Allow using the Intel iGPU as primary
Configure the Intel iGPU as primary video adapter if enabled according to EEPROM settings. The default is to use the ASPEED BMC as primary video adapter, which only has a VGA output and the remote KVM output. For now, use the FSP GOP driver to light up the iGPU. There are several issues with libgfxinit on the Hermes, probably due to the unusual setup of the iGPU's display outputs. They are routed to a mezzanine connector for a piggy-back sub-board, of which there are two models. The Poseidon piggy-back has two DisplayPort outputs and an HDMI output coming from a MegaChips LSPCON. The Avalanche piggy-back routes all three DisplayPort outputs from the iGPU into a FPGA, which acts as a DisplayPort sink. Note that the FSP GOP only initializes at most 2 iGPU display outputs. However, all three outputs function properly once OS (Windows, Linux) graphics drivers take over. Additionally, update the config file that Prodrive uses to build coreboot images so that the iGPU can be used as primary. TEST=Verify that the iGPU's outputs work properly in pre-OS, Windows and Linux, on both the Poseidon and Avalanche piggy-backs. Change-Id: I24d9ebc2055dc246e7f257aa2f3853b22c8af370 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62649 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/prodrive/hermes/eeprom.h5
-rw-r--r--src/mainboard/prodrive/hermes/mainboard.c24
-rw-r--r--src/mainboard/prodrive/hermes/romstage.c5
3 files changed, 34 insertions, 0 deletions
diff --git a/src/mainboard/prodrive/hermes/eeprom.h b/src/mainboard/prodrive/hermes/eeprom.h
index 6befd8e333..f02206f9bc 100644
--- a/src/mainboard/prodrive/hermes/eeprom.h
+++ b/src/mainboard/prodrive/hermes/eeprom.h
@@ -65,6 +65,11 @@ struct __packed eeprom_board_settings {
};
};
+enum {
+ PRIMARY_VIDEO_ASPEED = 0,
+ PRIMARY_VIDEO_INTEL = 1,
+};
+
_Static_assert(sizeof(struct eeprom_board_settings) == (12 + sizeof(uint32_t)),
"struct eeprom_board_settings has invalid size!");
diff --git a/src/mainboard/prodrive/hermes/mainboard.c b/src/mainboard/prodrive/hermes/mainboard.c
index 64494b175a..b85186d3e7 100644
--- a/src/mainboard/prodrive/hermes/mainboard.c
+++ b/src/mainboard/prodrive/hermes/mainboard.c
@@ -8,6 +8,7 @@
#include <crc_byte.h>
#include <device/device.h>
#include <device/dram/spd.h>
+#include <device/pci_ids.h>
#include <drivers/intel/gma/opregion.h>
#include <gpio.h>
#include <intelblocks/gpio.h>
@@ -302,3 +303,26 @@ static void mainboard_early(void *unused)
}
BOOT_STATE_INIT_ENTRY(BS_PRE_DEVICE, BS_ON_EXIT, mainboard_early, NULL);
+
+/*
+ * coreboot only exposes the last framebuffer that is set up.
+ * The ASPEED BMC will always be initialized after the IGD due to its higher
+ * bus number. To have coreboot only expose the IGD framebuffer skip the init
+ * function on the ASPEED.
+ */
+static void mainboard_configure_internal_gfx(void *unused)
+{
+ struct device *dev;
+ const struct eeprom_board_settings *board_cfg = get_board_settings();
+ if (!board_cfg)
+ return;
+
+ if (board_cfg->primary_video == PRIMARY_VIDEO_INTEL) {
+ dev = dev_find_device(PCI_VID_ASPEED, PCI_DID_ASPEED_AST2050_VGA, NULL);
+ dev->on_mainboard = false;
+ dev->enabled = false;
+ dev->ops->init = NULL;
+ }
+}
+
+BOOT_STATE_INIT_ENTRY(BS_DEV_RESOURCES, BS_ON_ENTRY, mainboard_configure_internal_gfx, NULL)
diff --git a/src/mainboard/prodrive/hermes/romstage.c b/src/mainboard/prodrive/hermes/romstage.c
index b52c52c489..985342678a 100644
--- a/src/mainboard/prodrive/hermes/romstage.c
+++ b/src/mainboard/prodrive/hermes/romstage.c
@@ -46,6 +46,11 @@ void mainboard_memory_init_params(FSPM_UPD *memupd)
memupd->FspmTestConfig.SmbusSpdWriteDisable = 0;
cannonlake_memcfg_init(&memupd->FspmConfig, &baseboard_mem_cfg);
+ /* Tell FSP-M about the desired primary video adapter so that GGC is set up properly */
+ const struct eeprom_board_settings *board_cfg = get_board_settings();
+ if (board_cfg && board_cfg->primary_video == PRIMARY_VIDEO_INTEL)
+ memupd->FspmConfig.PrimaryDisplay = 0; /* iGPU is primary */
+
/* Overwrite memupd */
if (!check_signature(offsetof(struct eeprom_layout, mupd), FSPM_UPD_SIGNATURE))
return;