mb/purism/librem_cnl: convert to using overridetrees

Convert the librem_14 and librem_mini from using separate devicetrees
to using a baseboard devicetree and overridetrees. This reduces code
duplication, and facilitates adding any new variants with minimal
additional code.

Test: build/boot Librem 14 and Librem Mini v2 boards

Change-Id: Ide65ffc750495c9ba2074757ce467efa2f384c56
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

2 files changed, 0 insertions, 169 deletions

diff --git a/src/mainboard/purism/librem_cnl/variants/librem_14/devicetree.cb b/src/mainboard/purism/librem_cnl/variants/librem_14/overridetree.cb
index 8b5c9086b9..b979740f8d 100644
--- a/src/mainboard/purism/librem_cnl/variants/librem_14/devicetree.cb
+++ b/src/mainboard/purism/librem_cnl/variants/librem_14/overridetree.cb
@@ -15,12 +15,6 @@ chip soc/intel/cannonlake
 		.tdp_pl2_override = 20,
 	}"
 
-	# Enable Enhanced Intel SpeedStep
-	register "eist_enable" = "1"
-
-# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
-	register "SaGv" = "SaGv_Enabled"
-
 # FSP Silicon (soc/intel/cannonlake/fsp_params.c)
 
 	# Serial I/O
@@ -28,45 +22,8 @@ chip soc/intel/cannonlake
 		[PchSerialIoIndexI2C0] = PchSerialIoPci,
 	}"
 
-	# Acoustic Noise
-	register "AcousticNoiseMitigation" = "1"
-
-	register "FastPkgCRampDisableIa" = "1"
-	register "FastPkgCRampDisableGt" = "1"
-	register "FastPkgCRampDisableSa" = "1"
-	register "FastPkgCRampDisableFivr" = "1"
-
-	register "SlowSlewRateForIa" = "3"	# fast/16
-	register "SlowSlewRateForGt" = "3"	# fast/16
-	register "SlowSlewRateForSa" = "3"	# fast/16
-	register "SlowSlewRateForFivr" = "3"	# fast/16
-
-	# Power
-	register "PchPmSlpS3MinAssert" = "3"	# 50ms
-	register "PchPmSlpS4MinAssert" = "1"	# 1s
-	register "PchPmSlpSusMinAssert" = "2"	# 500ms
-	register "PchPmSlpAMinAssert" = "4"	# 2s
-
-	# Thermal
-	register "tcc_offset" = "10"
-
-# PM Util (soc/intel/cannonlake/pmutil.c)
-	# GPE configuration
-	# Note that GPE events called out in ASL code rely on this
-	# route. i.e. If this route changes then the affected GPE
-	# offset bits also need to be changed.
-	# sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG)
-	register "gpe0_dw0" = "PMC_GPP_C"
-	register "gpe0_dw1" = "PMC_GPP_D"
-	register "gpe0_dw2" = "PMC_GPP_E"
-
 # Actual device tree
-	device cpu_cluster 0 on
-		device lapic 0 on end
-	end
-
 	device domain 0 on
-		device pci 00.0 on  end # Host Bridge
 		device pci 02.0 on	# Integrated Graphics Device
 			register "gfx" = "GMA_DEFAULT_PANEL(0)"
 			register "panel_cfg" = "{
@@ -78,11 +35,6 @@ chip soc/intel/cannonlake
 				.backlight_off_delay_ms	=    1,
 			}"
 		end
-		device pci 04.0 on	# SA Thermal device
-			register "Device4Enable" = "1"
-		end
-		device pci 12.0 on  end # Thermal Subsystem
-		device pci 13.0 off end # Integrated Sensor Hub
 		device pci 14.0 on	# USB xHCI
 			chip drivers/usb/acpi
 				device usb 0.0 on
@@ -189,15 +141,6 @@ chip soc/intel/cannonlake
 				device i2c 2c on end
 			end
 		end
-		device pci 15.1 off end # I2C #1
-		device pci 15.2 off end # I2C #2
-		device pci 15.3 off end # I2C #3
-		device pci 16.0 off end # Management Engine Interface 1
-		device pci 16.1 off end # Management Engine Interface 2
-		device pci 16.2 off end # Management Engine IDE-R
-		device pci 16.3 off end # Management Engine KT Redirection
-		device pci 16.4 off end # Management Engine Interface 3
-		device pci 16.5 off end # Management Engine Interface 4
 		device pci 17.0 on	# SATA
 			register "satapwroptimize" = "1"
 			register "SataSalpSupport" = "1"
@@ -208,16 +151,6 @@ chip soc/intel/cannonlake
 			register "SataPortsEnable[2]" = "1"
 			register "SataPortsDevSlp[2]" = "1"
 		end
-		device pci 19.0 off end # I2C #4
-		device pci 19.1 off end # I2C #5
-		device pci 19.2 off end # UART #2
-		device pci 1a.0 off end # eMMC
-		device pci 1c.0 off end # PCI Express Port 1
-		device pci 1c.1 off end # PCI Express Port 2
-		device pci 1c.2 off end # PCI Express Port 3
-		device pci 1c.3 off end # PCI Express Port 4
-		device pci 1c.4 off end # PCI Express Port 5
-		device pci 1c.5 off end # PCI Express Port 6
 		device pci 1c.6 on	# PCI Express Port 7 -- x1 M.2/E 2230 (WLAN)
 			register "PcieRpEnable[6]" = "1"
 			register "PcieRpSlotImplemented[6]" = "1"
@@ -241,9 +174,6 @@ chip soc/intel/cannonlake
 			register "PcieClkSrcClkReq[0]" = "0"
 			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth4X"
 		end
-		device pci 1d.1 off end # PCI Express Port 10
-		device pci 1d.2 off end # PCI Express Port 11
-		device pci 1d.3 off end # PCI Express Port 12
 		device pci 1d.4 on	# PCI Express Port 13 -- x4 M.2/M 2280 (NVMe)
 			register "PcieRpEnable[12]" = "1"
 			register "PcieRpSlotImplemented[12]" = "1"
@@ -252,13 +182,6 @@ chip soc/intel/cannonlake
 			register "PcieClkSrcClkReq[1]" = "1"
 			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth4X"
 		end
-		device pci 1d.5 off end # PCI Express Port 14
-		device pci 1d.6 off end # PCI Express Port 15
-		device pci 1d.7 off end # PCI Express Port 16
-		device pci 1e.0 off end # UART #0
-		device pci 1e.1 off end # UART #1
-		device pci 1e.2 off end # GSPI #0
-		device pci 1e.3 off end # GSPI #1
 		device pci 1f.0 on	# LPC Bridge
 			# LPC configuration from lspci -s 1f.0 -xxx
 			# Address 0x88: Decode 0x68 - 0x6F (EC PM channel)
@@ -271,13 +194,5 @@ chip soc/intel/cannonlake
 				device pnp 0c31.0 on  end
 			end
 		end
-		device pci 1f.1 off end # P2SB
-		device pci 1f.2 hidden end # Power Management Controller
-		device pci 1f.3 on	# Intel HDA
-			register "PchHdaAudioLinkHda" = "1"
-		end
-		device pci 1f.4 on  end # SMBus
-		device pci 1f.5 on  end # PCH SPI
-		device pci 1f.6 off end # GbE
 	end
 end
diff --git a/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb b/src/mainboard/purism/librem_cnl/variants/librem_mini/overridetree.cb
index 08d152c574..927031373e 100644
--- a/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb
+++ b/src/mainboard/purism/librem_cnl/variants/librem_mini/overridetree.cb
@@ -7,62 +7,19 @@ chip soc/intel/cannonlake
 		.tdp_pl2_override = 28,
 	}"
 
-	# Enable Enhanced Intel SpeedStep
-	register "eist_enable" = "1"
-
 # FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
 	register "SaGv" = "SaGv_FixedHigh"
 
 # FSP Silicon (soc/intel/cannonlake/fsp_params.c)
 
-	# Misc
-	register "AcousticNoiseMitigation" = "1"
-
-	register "FastPkgCRampDisableIa" = "1"
-	register "FastPkgCRampDisableGt" = "1"
-	register "FastPkgCRampDisableSa" = "1"
-	register "FastPkgCRampDisableFivr" = "1"
-
-	register "SlowSlewRateForIa" = "3"	# fast/16
-	register "SlowSlewRateForGt" = "3"	# fast/16
-	register "SlowSlewRateForSa" = "3"	# fast/16
-	register "SlowSlewRateForFivr" = "3"	# fast/16
-
-	# Power
-	register "PchPmSlpS3MinAssert" = "3"	# 50ms
-	register "PchPmSlpS4MinAssert" = "1"	# 1s
-	register "PchPmSlpSusMinAssert" = "2"	# 500ms
-	register "PchPmSlpAMinAssert" = "4"	# 2s
-
 	# Thermal
 	register "tcc_offset" = "12"
 
 	# Serial IRQ Mode
 	register "serirq_mode" = "SERIRQ_CONTINUOUS"
 
-# PM Util (soc/intel/cannonlake/pmutil.c)
-	# GPE configuration
-	# Note that GPE events called out in ASL code rely on this
-	# route. i.e. If this route changes then the affected GPE
-	# offset bits also need to be changed.
-	# sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG)
-	register "gpe0_dw0" = "PMC_GPP_C"
-	register "gpe0_dw1" = "PMC_GPP_D"
-	register "gpe0_dw2" = "PMC_GPP_E"
-
 # Actual device tree
-	device cpu_cluster 0 on
-		device lapic 0 on end
-	end
-
 	device domain 0 on
-		device pci 00.0 on  end # Host Bridge
-		device pci 02.0 on  end # Integrated Graphics Device
-		device pci 04.0 on	# SA Thermal device
-			register "Device4Enable" = "1"
-		end
-		device pci 12.0 on  end # Thermal Subsystem
-		device pci 13.0 off end # Integrated Sensor Hub
 		device pci 14.0 on	# USB xHCI
 			chip drivers/usb/acpi
 				device usb 0.0 on
@@ -166,33 +123,11 @@ chip soc/intel/cannonlake
 			register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)"	# Type-A rear lower
 			register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)"	# Type-A rear upper
 		end
-		device pci 14.1 off end # USB xDCI (OTG)
-		device pci 15.0 off end # I2C #0
-		device pci 15.1 off end # I2C #1
-		device pci 15.2 off end # I2C #2
-		device pci 15.3 off end # I2C #3
-		device pci 16.0 off end # Management Engine Interface 1
-		device pci 16.1 off end # Management Engine Interface 2
-		device pci 16.2 off end # Management Engine IDE-R
-		device pci 16.3 off end # Management Engine KT Redirection
-		device pci 16.4 off end # Management Engine Interface 3
-		device pci 16.5 off end # Management Engine Interface 4
 		device pci 17.0 on	# SATA
 			register "SataPortsEnable[0]" = "1" # 2.5"
 			register "SataPortsEnable[2]" = "1" # m.2
 			register "satapwroptimize" = "1"
 		end
-		device pci 19.0 off end # I2C #4
-		device pci 19.1 off end # I2C #5
-		device pci 19.2 off end # UART #2
-		device pci 1a.0 off end # eMMC
-		device pci 1c.0 off end # PCI Express Port 1
-		device pci 1c.1 off end # PCI Express Port 2
-		device pci 1c.2 off end # PCI Express Port 3
-		device pci 1c.3 off end # PCI Express Port 4
-		device pci 1c.4 off end # PCI Express Port 5
-		device pci 1c.5 off end # PCI Express Port 6
-		device pci 1c.6 off end # PCI Express Port 7
 		device pci 1c.7 on	# PCI Express Port 8 -- x1 M.2/E 2230 (WLAN)
 			register "PcieRpSlotImplemented[7]" = "1"
 			register "PcieRpEnable[7]" = "1"
@@ -201,15 +136,12 @@ chip soc/intel/cannonlake
 			register "PcieClkSrcUsage[2]" = "0x80"
 			smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "M.2/E 2230" "SlotDataBusWidth1X"
 		end
-		device pci 1d.0 off end # PCI Express Port 9
 		device pci 1d.1 on	# PCI Express Port 10
 			device pci 00.0 on end # x1 (LAN)
 			register "PcieRpEnable[9]" = "1"
 			register "PcieClkSrcUsage[3]" = "9"
 			register "PcieClkSrcClkReq[3]" = "3"
 		end
-		device pci 1d.2 off end # PCI Express Port 11
-		device pci 1d.3 off end # PCI Express Port 12
 		device pci 1d.4 on	# PCI Express Port 13 -- x4 M.2/M 2280 (NVMe)
 			register "PcieRpSlotImplemented[12]" = "1"
 			register "PcieRpEnable[12]" = "1"
@@ -218,21 +150,5 @@ chip soc/intel/cannonlake
 			register "PcieClkSrcClkReq[1]" = "1"
 			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth4X"
 		end
-		device pci 1d.5 off end # PCI Express Port 14
-		device pci 1d.6 off end # PCI Express Port 15
-		device pci 1d.7 off end # PCI Express Port 16
-		device pci 1e.0 off end # UART #0
-		device pci 1e.1 off end # UART #1
-		device pci 1e.2 off end # GSPI #0
-		device pci 1e.3 off end # GSPI #1
-		device pci 1f.0 on  end # LPC Bridge
-		device pci 1f.1 off end # P2SB
-		device pci 1f.2 hidden end # Power Management Controller
-		device pci 1f.3 on	# Intel HDA
-			register "PchHdaAudioLinkHda" = "1"
-		end
-		device pci 1f.4 on  end # SMBus
-		device pci 1f.5 on  end # PCH SPI
-		device pci 1f.6 off end # GbE
 	end
 end