mb/google/guybrush/var/nipperkin: update USB 2.0 controller Lane Parameter

Enhance USB 2.0 SI by increasing the level of "HS DC Voltage Level"
and "Disconnect Threshold Adjustment" per port:

port#0: COMPDISTUNE0: 0x1->0x5 / TXVREFTUNE0: 0x3->0x9
port#1: COMPDISTUNE0: 0x1->0x5 / TXVREFTUNE0: 0x3->0x9
port#4: COMPDISTUNE0: 0x1->0x6 / TXVREFTUNE0: 0x3->0xE
port#5: COMPDISTUNE0: 0x1->0x5 / TXVREFTUNE0: 0x3->0x9

BUG=b:203049656
BRANCH=guybrush
TEST=1. emerge-guybrush coreboot chromeos-bootimage
     2. pass USB eye diagram verification

Change-Id: If5a6563e93bfa6beb529a5593fcc9124ce62d77f
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>

1 files changed, 133 insertions, 0 deletions

diff --git a/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb b/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb
index c7917ae201..f9092a2a92 100644
--- a/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb
+++ b/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb
@@ -27,6 +27,139 @@ fw_config
 end
 
 chip soc/amd/cezanne
+
+	register "usb_phy_custom" = "1"
+	register "usb_phy" = "{
+		/* Left USB C0 Port */
+		.Usb2PhyPort[0] = {
+			.compdstune = 5,
+			.sqrxtune = 3,
+			.txfslstune = 3,
+			.txpreempamptune = 1,
+			.txpreemppulsetune = 0,
+			.txrisetune = 1,
+			.txvreftune = 9,
+			.txhsxvtune = 3,
+			.txrestune = 1,
+		},
+		/* Left USB A0 Port or WWAN */
+		.Usb2PhyPort[1] = {
+			.compdstune = 5,
+			.sqrxtune = 3,
+			.txfslstune = 3,
+			.txpreempamptune = 1,
+			.txpreemppulsetune = 0,
+			.txrisetune = 1,
+			.txvreftune = 9,
+			.txhsxvtune = 3,
+			.txrestune = 1,
+		},
+		/* User facing camera */
+		.Usb2PhyPort[2] = {
+			.compdstune = 1,
+			.sqrxtune = 3,
+			.txfslstune = 3,
+			.txpreempamptune = 2,
+			.txpreemppulsetune = 0,
+			.txrisetune = 2,
+			.txvreftune = 3,
+			.txhsxvtune = 3,
+			.txrestune = 2,
+		},
+		/* World facing camera */
+		.Usb2PhyPort[3] = {
+			.compdstune = 1,
+			.sqrxtune = 3,
+			.txfslstune = 3,
+			.txpreempamptune = 2,
+			.txpreemppulsetune = 0,
+			.txrisetune = 2,
+			.txvreftune = 3,
+			.txhsxvtune = 3,
+			.txrestune = 2,
+		},
+		/* Right USB C1 Port */
+		.Usb2PhyPort[4] = {
+			.compdstune = 6,
+			.sqrxtune = 3,
+			.txfslstune = 3,
+			.txpreempamptune = 1,
+			.txpreemppulsetune = 0,
+			.txrisetune = 1,
+			.txvreftune = 0xe,
+			.txhsxvtune = 3,
+			.txrestune = 1,
+		},
+		/* Right USB A1 Port */
+		.Usb2PhyPort[5] = {
+			.compdstune = 5,
+			.sqrxtune = 3,
+			.txfslstune = 3,
+			.txpreempamptune = 1,
+			.txpreemppulsetune = 0,
+			.txrisetune = 1,
+			.txvreftune = 9,
+			.txhsxvtune = 3,
+			.txrestune = 1,
+		},
+		/* WiFi / Bluetooth */
+		.Usb2PhyPort[6] = {
+			.compdstune = 1,
+			.sqrxtune = 3,
+			.txfslstune = 3,
+			.txpreempamptune = 2,
+			.txpreemppulsetune = 0,
+			.txrisetune = 2,
+			.txvreftune = 3,
+			.txhsxvtune = 3,
+			.txrestune = 2,
+		},
+		/* Smart Card */
+		.Usb2PhyPort[7] = {
+			.compdstune = 1,
+			.sqrxtune = 3,
+			.txfslstune = 3,
+			.txpreempamptune = 2,
+			.txpreemppulsetune = 0,
+			.txrisetune = 2,
+			.txvreftune = 3,
+			.txhsxvtune = 3,
+			.txrestune = 2,
+		},
+		/* Left USB C0 Port */
+		.Usb3PhyPort[0] = {
+			.tx_term_ctrl=2,
+			.rx_term_ctrl=2,
+			.tx_vboost_lvl_en=1,
+			.tx_vboost_lvl=5,
+		},
+		/* Left USB A0 Port or WWAN */
+		.Usb3PhyPort[1] = {
+			.tx_term_ctrl=2,
+			.rx_term_ctrl=2,
+			.tx_vboost_lvl_en=1,
+			.tx_vboost_lvl=5,
+		},
+		/* Right USB C1 Port */
+		.Usb3PhyPort[2] = {
+			.tx_term_ctrl=2,
+			.rx_term_ctrl=2,
+			.tx_vboost_lvl_en=1,
+			.tx_vboost_lvl=5,
+		},
+		/* Right USB A1 Port */
+		.Usb3PhyPort[3] = {
+			.tx_term_ctrl=2,
+			.rx_term_ctrl=2,
+			.tx_vboost_lvl_en=1,
+			.tx_vboost_lvl=5,
+		},
+		.ComboPhyStaticConfig[0] = 0,
+		.ComboPhyStaticConfig[1] = 0,
+		.BatteryChargerEnable = 0,
+		.PhyP3CpmP4Support = 0,
+	}"
+
 	device domain 0 on
 		device ref gpp_bridge_2 on
 			# Required so the NVMe gets placed into D3 when entering S0i3.