mb: remove duplicated Make code for spd.bin generation

Drop duplicated code for spd.bin generation that is provided globally
in lib/Makefile.inc.

For all affected boards it has been verified that the output binary
functionally matches the original one. The changed execution order of
Make instructions influenced the cbfs file order. Hence, the rom images
can't be compared directly.

Thus, the output files of the two timeless abuild runs have been compared.
Further, it was verified that the final files in cbfs stay identical, by
comparing the extracted cbfs of each board.

The boards (possibly) needing modification could be found with something
like this (with false positives, though):

find src/mainboard -name Makefile.inc | \
  xargs egrep 'SPD_BIN|SPD_DEPS' | cut -d: -f1 | sort -u

Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Icd3ac0fd6c901228554115c6350d88bb49874587
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>

1 files changed, 252 insertions, 0 deletions

diff --git a/src/mainboard/gizmosphere/gizmo/spd/Elpida_EDJ2116DEBG.spd.hex b/src/mainboard/gizmosphere/gizmo/spd/Elpida_EDJ2116DEBG.spd.hex
new file mode 100644
index 0000000000..5b3b94ed9d
--- /dev/null
+++ b/src/mainboard/gizmosphere/gizmo/spd/Elpida_EDJ2116DEBG.spd.hex
@@ -0,0 +1,252 @@
+# Elpida EDJ2116DEBG 2Gb
+
+#	0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+#		bits[3:0]: 1 = 128 SPD Bytes Used
+#		bits[6:4]: 1 = 256 SPD Bytes Total
+#		bit7 : 0 = CRC covers bytes 0 ~ 125
+11
+
+#	1 SPD Revision
+#		0x10 = Revision 1.0
+10
+
+#	2 Key Byte / DRAM Device Type
+#		bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+#	3 Key Byte / Module Type
+#		bits[3:0]: 3 = SO-DIMM
+#		bits[7:4]: reserved
+03
+
+#	4 SDRAM CHIP Density and Banks
+#		bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip
+#		bits[6:4]: 0 = 3 (8 banks)
+#		bit7 : reserved
+03
+
+#	5 SDRAM Addressing
+#		bits[2:0]: 1 = 10 Column Address Bits
+#		bits[5:3]: 2 = 14 Row Address Bits
+#		bits[7:6]: reserved
+11
+
+#	6 Module Nominal Voltage, VDD
+#		bit0 : 0 = 1.5 V operable
+#		bit1 : 0 = NOT 1.35 V operable
+#		bit2 : 0 = NOT 1.25 V operable
+#		bits[7:3]: reserved
+00
+
+#	7 Module Organization
+#		bits[2:0]: 2 = 16 bits
+#		bits[5:3]: 0 = 1 Rank
+#		bits[7:6]: reserved
+02
+
+#	8 Module Memory Bus Width
+#		bits[2:0]: 3 = Primary bus width is 64 bits
+#		bits[4:3]: 0 = 0 bits (no bus width extension)
+#		bits[7:5]: reserved
+03
+
+#	9 Fine Timebase (FTB) Dividend / Divisor
+#		bits[3:0]: 0x02 divisor
+#		bits[7:4]: 0x05 dividend
+#		5 / 2 = 2.5ps
+52
+
+#	10 Medium Timebase (MTB) Dividend
+#	11 Medium Timebase (MTB) Divisor
+#		1 / 8 = .125 ns - used for clock freq of 400 through 1066 MHz
+01 08
+
+#	12 SDRAM Minimum Cycle Time (tCKmin)
+#		0x0a = tCKmin of 1.25 ns = DDR3-1600 (800 MHz clock)
+#		0x0c = tCKmin of 1.25 ns = DDR3-1333 (667 MHz clock)
+0C
+
+#	13 Reserved
+00
+
+#	14 CAS Latencies Supported, Least Significant Byte
+#		0xfc = CL 6,7,8,9,10,11
+#		0xfe = CL 5,6,7,8,9,10,11
+#	15 CAS Latencies Supported, Most Significant Byte
+#		Cas Latencies of 11 - 5 are supported
+FC 00
+
+#	16 Minimum CAS Latency Time (tAAmin)
+#		0x69 = 13.125ns
+#		0x6E = 13.75ns - DDR3-1600K
+69
+
+#	17 Minimum Write Recovery Time (tWRmin)
+#		0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+#	18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+#		0x69 = 13.125ns
+#		0x6E = 13.75ns - DDR3-1600K
+69
+
+#	19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+#		0x38 = 7.0ns
+#		0x3C = 7.5ns
+38
+
+#	20 Minimum Row Precharge Delay Time (tRPmin)
+#		0x69 = 13.125ns -
+#		0x6E = 13.75ns - DDR3-1600K
+69
+
+#	21 Upper Nibbles for tRAS and tRC
+#		bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+#		bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+#	22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+#		0x118 = 35ns - DDR3-1600 (see byte 21)
+#		0x120 = 36ns - DDR3
+20
+
+#	23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+#		0x186 = 48.75ns - DDR3-1600K
+#		0x189 = 49.125ns - DDR3-
+89
+
+#	24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+#	25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+#		0x500 = 160ns - for 2 Gigabit chips
+00 05
+
+#	26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+#		0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+#	27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+#		0x3c = 7.5ns - All DDR3 SDRAM speed bins
+3C
+
+#	28 Upper Nibble for tFAWmin
+#	29 Minimum Four Activate Window Delay Time (tFAWmin)
+#		0x0140 = 40ns - DDR3-1600, 2 KB page size
+#		0x0168 = 45ns - DDR3- , 2 KB page size
+01 68
+
+#	30 SDRAM Optional Feature
+#		bit0 : 1= RZQ/6 supported
+#		bit1 : 1 = RZQ/7 supported
+#		bits[6:2]: reserved
+#		bit7 : 1 = DLL Off mode supported
+83
+
+#	31 SDRAM Thermal and Refresh Options
+#		bit0 : 1 = Temp up to 95c supported
+#		bit1 : 0 = 85-95c uses 2x refresh rate
+#		bit2 : 1 = Auto Self Refresh supported
+#		bit3 : 0 = no on die thermal sensor
+#		bits[6:4]: reserved
+#		bit7 : 0 = partial self refresh supported
+05
+
+#	32 Module Thermal Sensor
+#		0 = Thermal sensor not incorporated onto this assembly
+00
+
+#	33 SDRAM Device Type
+#		bits[1:0]: 0 = Signal Loading not specified
+#		bits[3:2]: reserved
+#		bits[6:4]: 0 = Die count not specified
+#		bit7 : 0 = Standard Monolithic DRAM Device
+00
+
+#	34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+00
+
+#	35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+00
+
+#	36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+00
+
+#	37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+00
+
+#	38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00
+
+#	39 (reserved)
+00
+
+#	40 - 47 (reserved)
+00 00 00 00 00 00 00 00
+
+#	48 - 55 (reserved)
+00 00 00 00 00 00 00 00
+
+#	56 - 59 (reserved)
+00 00 00 00
+
+#	60 Raw Card Extension, Module Nominal Height
+#		bits[4:0]: 0 = <= 15mm tall
+#		bits[7:5]: 0 = raw card revision 0-3
+00
+
+#	61 Module Maximum Thickness
+#		bits[3:0]: 0 = thickness front <= 1mm
+#		bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+#	62 Reference Raw Card Used
+#		bits[4:0]: 0 = Reference Raw card A used
+#		bits[6:5]: 0 = revision 0
+#		bit7 : 0 = Reference raw cards A through AL
+00
+
+#	63 Address Mapping from Edge Connector to DRAM
+#		bit0 : 0 = standard mapping (not mirrored)
+#		bits[7:1]: reserved
+00
+
+#	64 - 71 (reserved)
+00 00 00 00 00 00 00 00
+
+#	72 - 79 (reserved)
+00 00 00 00 00 00 00 00
+
+#	80 - 87 (reserved)
+00 00 00 00 00 00 00 00
+
+#	88 - 95 (reserved)
+00 00 00 00 00 00 00 00
+
+#	96 - 103 (reserved)
+00 00 00 00 00 00 00 00
+
+#	104 - 111 (reserved)
+00 00 00 00 00 00 00 00
+
+#	112 - 116 (reserved)
+00 00 00 00 00
+
+#	117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+#		0x0001 = AMD
+00 01
+
+#	119 Module ID: Module Manufacturing Location - OEM specified
+00
+
+#	120 Module ID: Module Manufacture Year in BCD
+#		0x13 = 2013
+13
+
+#	121 Module ID: Module Manufacture week
+#		0x12 = 12th week
+12
+
+#	122 - 125: Module Serial Number
+53 41 47 45
+
+#	126 - 127: Cyclical Redundancy Code
+9D A6