This target is dead.

The company is dead. 

It causes builds to fail, and that is not a problem we need to have. 

Removing it to remove the problems it causes. 

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3945 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 0 insertions, 330 deletions

diff --git a/src/mainboard/agami/aruma/mainboard.c b/src/mainboard/agami/aruma/mainboard.c
deleted file mode 100644
index 3bc65b39c6..0000000000
--- a/src/mainboard/agami/aruma/mainboard.c
+++ /dev/null
@@ -1,330 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <cpu/x86/msr.h>
-#include <part/hard_reset.h>
-#include <device/smbus.h>
-#include <delay.h>
-
-#include <arch/io.h>
-#include "../../../northbridge/amd/amdk8/northbridge.h"
-#include <cpu/amd/model_fxx_rev.h>
-#include "chip.h"
-
-#include "pc80/mc146818rtc.h"
-
-
-#undef DEBUG
-#define DEBUG 0
-#if DEBUG 
-static void debug_init(device_t dev)
-{
-	unsigned bus;
-	unsigned devfn;
-#if 0
-	for(bus = 0; bus < 256; bus++) {
-		for(devfn = 0; devfn < 256; devfn++) {
-			int i;
-			dev = dev_find_slot(bus, devfn);
-			if (!dev) {
-				continue;
-			}
-			if (!dev->enabled) {
-				continue;
-			}
-			printk_info("%02x:%02x.%0x aka %s\n", 
-				bus, devfn >> 3, devfn & 7, dev_path(dev));
-			for(i = 0; i < 256; i++) {
-				if ((i & 0x0f) == 0) {
-					printk_info("%02x:", i);
-				}
-				printk_info(" %02x", pci_read_config8(dev, i));
-				if ((i & 0x0f) == 0xf) {
-					printk_info("\n");
-				}
-			}
-			printk_info("\n");
-		}
-	}
-#endif
-#if 0
-	msr_t msr;
-	unsigned index;
-	unsigned eax, ebx, ecx, edx;
-	index = 0x80000007;
-	printk_debug("calling cpuid 0x%08x\n", index);
-	asm volatile(
-		"cpuid"
-		: "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
-		: "a" (index)
-		);
-	printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n",
-		index, eax, ebx, ecx, edx);
-	if (edx & (3 << 1)) {
-		index = 0xC0010042;
-		printk_debug("Reading msr: 0x%08x\n", index);
-		msr = rdmsr(index);
-		printk_debug("msr[0x%08x]: 0x%08x%08x\n",
-			index, msr.hi, msr.hi);
-	}
-#endif
-}
-
-static void debug_noop(device_t dummy)
-{
-}
-
-static struct device_operations debug_operations = {
-	.read_resources   = debug_noop,
-	.set_resources    = debug_noop,
-	.enable_resources = debug_noop,
-	.init             = debug_init,
-};
-
-static unsigned int scan_root_bus(device_t root, unsigned int max)
-{
-	struct device_path path;
-	device_t debug;
-	max = root_dev_scan_bus(root, max);
-	path.type = DEVICE_PATH_PNP;
-	path.u.pnp.port   = 0;
-	path.u.pnp.device = 0;
-	debug = alloc_dev(&root->link[1], &path);
-	debug->ops = &debug_operations;
-	return max;
-}
-#endif
-
-#if 1
-static void handle_smbus_error(int value, const char *msg)
-{
-	if (value >= 0) {
-		return;
-	}
-	switch(value) {
-	case SMBUS_WAIT_UNTIL_READY_TIMEOUT:
-		printk_emerg("SMBUS wait until ready timed out - resetting...");
-		hard_reset();
-		break;
-	case SMBUS_WAIT_UNTIL_DONE_TIMEOUT:
-		printk_emerg("SMBUS wait until done timed out - resetting...");
-		hard_reset();
-		break;
-	default:
-		die(msg);
-		break;
-	}
-}
-
-#define ADM1026_DEVICE 0x2d /* Either 0x2c, 0x2d or 0x2e. */
-#define ADM1026_REG_CONFIG1 0x00
-#define CFG1_MONITOR     0x01
-#define CFG1_INT_ENABLE  0x02
-#define CFG1_INT_CLEAR   0x04
-#define CFG1_AIN8_9      0x08
-#define CFG1_THERM_HOT   0x10
-#define CFT1_DAC_AFC     0x20
-#define CFG1_PWM_AFC     0x40
-#define CFG1_RESET       0x80
-#define ADM1026_REG_CONFIG2 0x01
-#define ADM1026_REG_CONFIG3 0x07
-
-
-
-#define BILLION 1000000000UL
-
-static void  verify_cpu_voltage(const char *name, 
-	device_t dev, unsigned int reg, 
-	unsigned factor, unsigned cpu_volts, unsigned delta)
-{
-	unsigned nvolts_lo, nvolts_hi;
-	unsigned cpuvolts_hi, cpuvolts_lo;
-	int value;
-	int loops;
-
-	loops = 1000;
-	do {
-		value = smbus_read_byte(dev, reg);
-		handle_smbus_error(value, "SMBUS read byte failed");
-	} while ((--loops > 0) && value == 0);
-	/* Convert the byte value to nanoVolts.
-	 * My accuracy is nowhere near that good but I don't
-	 * have to round so the math is simple. 
-	 * I can only go up to about 4.2 Volts this way so my range is
-	 * limited.
-	 */
-	nvolts_lo = ((unsigned)value * factor);
-	nvolts_hi = nvolts_lo + factor - 1;
-	/* Get the range of acceptable cpu voltage values */
-	cpuvolts_lo = cpu_volts - delta;
-	cpuvolts_hi = cpu_volts + delta;
-	if ((nvolts_lo < cpuvolts_lo) || (nvolts_hi > cpuvolts_hi)) {
-		printk_emerg("%s at (%u.%09u-%u.%09u)Volts expected %u.%09u+/-%u.%09uVolts\n",
-			name,
-			nvolts_lo/BILLION, nvolts_lo%BILLION,
-			nvolts_hi/BILLION, nvolts_hi%BILLION,
-			cpu_volts/BILLION, cpu_volts%BILLION,
-			delta/BILLION, delta%BILLION);
-		die("");
-	}
-	printk_info("%s at (%u.%09u-%u.%09u)Volts\n",
-		name,
-		nvolts_lo/BILLION, nvolts_lo%BILLION,
-		nvolts_hi/BILLION, nvolts_hi%BILLION);
-		
-}
-
-static void adm1026_enable_monitoring(device_t dev)
-{
-	int result;
-	result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);
-	handle_smbus_error(result, "ADM1026: cannot read config1");
-
-	result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1_RESET);
-	result = smbus_write_byte(dev, ADM1026_REG_CONFIG1, result);
-	handle_smbus_error(result, "ADM1026: cannot write to config1");
-
-	result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);
-	handle_smbus_error(result, "ADM1026: cannot reread config1");
-	if (!(result & CFG1_MONITOR)) {
-		die("ADM1026: monitoring would not enable");
-	}
-}
-
-
-static unsigned k8_cpu_volts(void)
-{
-	unsigned volts = ~0;
-	if (is_cpu_c0()) {
-		volts = 1500000000;
-	}
-	if (is_cpu_b3()) {
-		volts = 1550000000;
-	}
-	return volts;
-}
-
-static void verify_cpu_voltages(device_t dev)
-{
-	unsigned cpu_volts;
-	unsigned delta;
-#if 0
-	delta =  50000000;
-#else
-	delta =  75000000;
-#endif
-	cpu_volts = k8_cpu_volts();
-	if (cpu_volts == ~0) {
-		printk_info("Required cpu voltage unknwon not checking\n");
-		return; 
-	}
-	/* I need to read registers 0x37 == Ain7CPU1 core 0x2d == VcppCPU0 core */
-	/* CPU1 core 
-	 * The sensor has a range of 0-2.5V and reports in
-	 * 256 distinct steps.
-	 */
-	verify_cpu_voltage("CPU1 Vcore", dev, 0x37, 9765625, 
-		cpu_volts, delta);
-	/* CPU0 core 
-	 * The sensor has range of 0-3.0V and reports in 
-	 * 256 distinct steps.
-	 */
-	verify_cpu_voltage("CPU0 Vcore", dev, 0x2d, 11718750, 
-		cpu_volts, delta);
-}
-
-#define SMBUS_MUX 0x71
-
-static void do_verify_cpu_voltages(void)
-{
-	device_t smbus_dev;
-	device_t mux, sensor;
-	struct device_path mux_path, sensor_path;
-	int result;
-	int mux_setting;
-	
-	/* Find the smbus controller */
-	smbus_dev = dev_find_device(0x1022, 0x746b, 0);
-	if (!smbus_dev) {
-		die("SMBUS controller not found\n");
-	}
-
-	/* Find the smbus mux */
-	mux_path.type         = DEVICE_PATH_I2C;
-	mux_path.u.i2c.device = SMBUS_MUX;
-	mux = find_dev_path(smbus_dev, &mux_path);
-	if (!mux) {
-		die("SMBUS mux not found\n");
-	}
-
-	/* Find the adm1026 sensor */
-	sensor_path.type         = DEVICE_PATH_I2C;
-	sensor_path.u.i2c.device = ADM1026_DEVICE;
-	sensor = find_dev_path(mux, &sensor_path);
-	if (!sensor) {
-		die("ADM1026 not found\n");
-	}
-	
-	/* Set the mux to see the temperature sensors */
-	mux_setting = 1;
-	result = smbus_send_byte(mux, mux_setting);
-	handle_smbus_error(result, "SMBUS send byte failed\n");
-
-	result = smbus_recv_byte(mux);
-	handle_smbus_error(result, "SMBUS recv byte failed\n");
-	if (result != mux_setting) {
-		printk_emerg("SMBUS mux would not set to %d\n", mux_setting);
-		die("");
-	}
-
-	adm1026_enable_monitoring(sensor);
-
-	/* It takes 11.38ms to read a new voltage sensor value */
-	mdelay(12);
-
-	/* Read the cpu voltages and make certain everything looks sane */
-	verify_cpu_voltages(sensor);
-}
-#else
-#define do_verify_cpu_voltages() do {} while(0)
-#endif
-
-
-static void fixup_aruma(void)
-{
-	msr_t msr;
-
-	/* bit 6 (0x40) in MSR 0xC0010015 
-	 * disables the TLB cache flush filter
-	 */
-	msr=rdmsr(0xC0010015);
-	msr.lo |= 0x40;
-	wrmsr(0xC0010015, msr);
-}
-
-
-static void mainboard_init(device_t dev)
-{
-	root_dev_init(dev);
-
-	printk_info("Initializing mainboard components... ");
-	// do_verify_cpu_voltages();
-	printk_info("ok\n");
-
-	printk_info("Initializing mainboard specific functions... ");
-	fixup_aruma();
-	printk_info("ok\n");
-}
-
-static void enable_dev(struct device *dev)
-{
-	dev->ops->init = mainboard_init;
-}
-
-struct chip_operations mainboard_agami_aruma_ops = {
-	CHIP_NAME("AGAMI Aruma Mainboard")
-	.enable_dev = enable_dev, 
-};
-