Drop SC520 and related boards

There is no Cache As Ram for these boards, let's get rid of them.

Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

Change-Id: Ia70befc59708c360ad02ed7e3a49d3b0f95dc707
Reviewed-on: http://review.coreboot.org/7119
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

6 files changed, 0 insertions, 852 deletions

diff --git a/src/cpu/amd/Kconfig b/src/cpu/amd/Kconfig
index c98ec848bd..8286b2a85b 100644
--- a/src/cpu/amd/Kconfig
+++ b/src/cpu/amd/Kconfig
@@ -15,7 +15,5 @@ source src/cpu/amd/model_10xxx/Kconfig
 source src/cpu/amd/geode_gx2/Kconfig
 source src/cpu/amd/geode_lx/Kconfig
 
-source src/cpu/amd/sc520/Kconfig
-
 source src/cpu/amd/agesa/Kconfig
 source src/cpu/amd/pi/Kconfig
diff --git a/src/cpu/amd/Makefile.inc b/src/cpu/amd/Makefile.inc
index 3f39c94fc8..a73e25ff19 100644
--- a/src/cpu/amd/Makefile.inc
+++ b/src/cpu/amd/Makefile.inc
@@ -10,7 +10,6 @@ subdirs-$(CONFIG_CPU_AMD_SOCKET_ASB2) += socket_ASB2
 subdirs-$(CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA) += socket_C32
 subdirs-$(CONFIG_CPU_AMD_GEODE_GX2) += geode_gx2
 subdirs-$(CONFIG_CPU_AMD_GEODE_LX) += geode_lx
-subdirs-$(CONFIG_CPU_AMD_SC520) += sc520
 subdirs-$(CONFIG_CPU_AMD_SOCKET_S1G1) += socket_S1G1
 
 subdirs-$(CONFIG_CPU_AMD_AGESA) += agesa
diff --git a/src/cpu/amd/sc520/Kconfig b/src/cpu/amd/sc520/Kconfig
deleted file mode 100644
index 7696b5cdcd..0000000000
--- a/src/cpu/amd/sc520/Kconfig
+++ /dev/null
@@ -1,5 +0,0 @@
-config CPU_AMD_SC520
-	bool
-	select ARCH_BOOTBLOCK_X86_32
-	select ARCH_ROMSTAGE_X86_32
-	select ARCH_RAMSTAGE_X86_32
diff --git a/src/cpu/amd/sc520/Makefile.inc b/src/cpu/amd/sc520/Makefile.inc
deleted file mode 100644
index 03f9e0f9bf..0000000000
--- a/src/cpu/amd/sc520/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-ramstage-y += sc520.c
diff --git a/src/cpu/amd/sc520/raminit.c b/src/cpu/amd/sc520/raminit.c
deleted file mode 100644
index f3f7071140..0000000000
--- a/src/cpu/amd/sc520/raminit.c
+++ /dev/null
@@ -1,643 +0,0 @@
-/* this setupcpu function comes from: */
-/*==============================================================================*/
-/* FILE   :  start16.asm*/
-/**/
-/* DESC   : A  16 bit mode assembly language startup program, intended for*/
-/*          use with on Aspen SC520 platforms.*/
-/**/
-/* 11/16/2000 Added support for the NetSC520*/
-/* 12/28/2000 Modified to boot linux image*/
-/**/
-/* =============================================================================*/
-/*                                                                             */
-/*  Copyright 2000 Advanced Micro Devices, Inc.                                */
-/*                                                                             */
-/* This software is the property of Advanced Micro Devices, Inc  (AMD)  which */
-/* specifically grants the user the right to modify, use and distribute this */
-/* software provided this COPYRIGHT NOTICE is not removed or altered.  All */
-/* other rights are reserved by AMD.                                                       */
-/*                                                                            */
-/* THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY */
-/* OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF */
-/* THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE.*/
-/* IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER*/
-/* (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS*/
-/* INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY*/
-/* TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF*/
-/* SUCH DAMAGES.  BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR*/
-/* LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE*/
-/* LIMITATION MAY NOT APPLY TO YOU.*/
-/**/
-/* AMD does not assume any responsibility for any errors that may appear in*/
-/* the Materials nor any responsibility to support or update the Materials.*/
-/* AMD retains the right to make changes to its test specifications at any*/
-/* time, without notice.*/
-/**/
-/* So that all may benefit from your experience, please report  any  problems */
-/* or suggestions about this software back to AMD.  Please include your name, */
-/* company,  telephone number,  AMD product requiring support and question or */
-/* problem encountered.                                                       */
-/*                                                                            */
-/* Advanced Micro Devices, Inc.         Worldwide support and contact           */
-/* Embedded Processor Division            information available at:               */
-/* Systems Engineering                       epd.support@amd.com*/
-/* 5204 E. Ben White Blvd.                          -or-*/
-/* Austin, TX 78741                http://www.amd.com/html/support/techsup.html*/
-/* ============================================================================*/
-
-
-#define OUTC(addr, val) *(unsigned char *)(addr) = (val)
-
-/* sadly, romcc can't quite handle what we want, so we do this ugly thing */
-#define drcctl   (( volatile unsigned char *)0xfffef010)
-#define drcmctl   (( volatile unsigned char *)0xfffef012)
-#define drccfg   (( volatile unsigned char *)0xfffef014)
-
-#define drcbendadr   (( volatile unsigned long *)0xfffef018)
-#define eccctl   (( volatile unsigned char *)0xfffef020)
-#define dbctl   (( volatile unsigned char *)0xfffef040)
-
-void setupsc520(void)
-{
-	volatile unsigned char *cp;
-	volatile unsigned short *sp;
-	volatile unsigned long *edi;
-
-	/* do this to see if MMCR will start acting right. we suspect
-	 * you have to do SOMETHING to get things going. I'm really
-	 * starting to hate this processor.
-	 */
-
-	/* no, that did not help. I wonder what will?
-	 * outl(0x800df0cb, 0xfffc);
-	 */
-
-	/* well, this is special! You have to do SHORT writes to the
-	 * locations, even though they are CHAR in size and CHAR aligned
-	 * and technically, a SHORT write will result in -- yoo ha! --
-	 * over writing the next location! Thanks to the u-boot guys
-	 * for a reference code I can use. with these short pointers,
-	 * it now reliably comes up after power cycle with printk. Ah yi
-	 * yi.
-   	 */
-
-	/* turn off the write buffer*/
-	/* per the note above, make this a short? Let's try it. */
-	sp = (unsigned short *)0xfffef040;
-	*sp = 0;
-
-	/* as per the book: */
-	/* PAR register setup */
-	/* set up the PAR registers as they are on the MSM586SEG */
-	/*    moved to romstage.c by Stepan, Ron says: */
-	/* NOTE: move this to mainboard.c ASAP */
-	setup_pars();
-
-	/* CPCSF register */
-	sp =  (unsigned short *)0xfffefc24;
-	*sp = 0xfe;
-
-	/* ADDDECTL */
-	sp =  (unsigned short *)0xfffefc80;
-	*sp = 0x10;
-
-	/* byte writes in AMD assembly */
-	/* we do short anyway, since u-boot does ... */
-	/*set the GP CS offset*/
-	sp =  (unsigned short *)0xfffefc08;
-	*sp = 0x00001;
-	/*set the GP CS width*/
-	sp =  (unsigned short *)0xfffefc09;
-	*sp = 0x00003;
-
-	/* short writes in AMD assembly */
-	/*set the GP CS width*/
-	sp =  (unsigned short *)0xfffefc0a;
-	*sp = 0x00001;
-	/*set the RD pulse width*/
-	sp =  (unsigned short *)0xfffefc0b;
-	*sp = 0x00003;
-	/*set the GP RD offset */
-	sp =  (unsigned short *)0xfffefc0c;
-	*sp = 0x00001;
-	/*set the GP WR pulse width*/
-	sp =  (unsigned short *)0xfffefc0d;
-	*sp = 0x00003;
-	/*set the GP WR offset*/
-	sp =  (unsigned short *)0xfffefc0e;
-	*sp = 0x00001;
-
-
-	/* set up the GP IO pins*/
-	/*set the GPIO directionreg*/
-	sp =  (unsigned short *)0xfffefc2c;
-	*sp = 0x00000;
-	/*set the GPIO directionreg*/
-	sp =  (unsigned short *)0xfffefc2a;
-	*sp = 0x00000;
-	/*set the GPIO pin function 31-16 reg*/
-	sp =  (unsigned short *)0xfffefc22;
-	*sp = 0x0FFFF;
-	/*set the GPIO pin function 15-0 reg*/
-	sp =  (unsigned short *)0xfffefc20;
-	*sp = 0x0FFFF;
-
-
-	/* the 0x80 led should now be working*/
-	post_code(0xaa);
-#if 0
-	/* wtf are 680 leds ... *//* <-- WTF is this comment? */
-	par = (unsigned long *) 0xfffef0c4;
-	*par = 0x28000680;
-	/* well? */
-	post_code(0x55);
-#endif
-
-	/* set the uart baud rate clocks to the normal 1.8432 MHz.*/
-	/* enable interrupts here? Why not? */
-	cp = (unsigned char *)0xfffefcc0;
-	*cp = 4 | 3;			/* uart 1 clock source */
-	cp = (unsigned char *)0xfffefcc4;
-	*cp = 4;			/* uart 2 clock source */
-
-#if 0
-/*; set the interrupt mapping registers.*/
-	cp = (unsigned char *)0x0fffefd20;
-	*cp = 0x01;
-
-	cp = (unsigned char *)0x0fffefd28;
-	*cp = 0x0c;
-
-	cp = (unsigned char *)0x0fffefd29;
-	*cp = 0x0b;
-
-	cp = (unsigned char *)0x0fffefd30;
-	*cp = 0x07;
-
-	cp = (unsigned char *)0x0fffefd43;
-	*cp = 0x03;
-
-	cp = (unsigned char *)0x0fffefd51;
-	*cp = 0x02;
-#endif
-
-/* Stepan says: This needs to go to the msm586seg code */
-/* "enumerate" the PCI. Mainly set the interrupt bits on the PCnetFast. */
-	outl(0x08000683c, 0xcf8);
-	outl(0xc, 0xcfc); /* set the interrupt line */
-
-
-	/* Set the SC520 PCI host bridge to target mode to
-	 * allow external bus mastering events
-	 */
-	/* index the status command register on device 0*/
-	outl(0x080000004, 0x0cf8);
-	outl(0x2, 0xcfc);		/*set the memory access enable bit*/
-	OUTC(0x0fffef072, 1);		/* enable req bits in SYSARBMENB */
-}
-
-
-/*
- *
- *
- */
-
-
-
-#define CACHELINESZ   0x00000010  /*  size of our cache line (read buffer)*/
-
-#define COL11_ADR  *(unsigned int *)0x0e001e00 /* 11 col addrs*/
-#define COL10_ADR  *(unsigned int *)0x0e000e00 /* 10 col addrs*/
-#define COL09_ADR  *(unsigned int *)0x0e000600 /*  9 col addrs*/
-#define COL08_ADR  *(unsigned int *)0x0e000200 /*  8 col addrs*/
-
-#define ROW14_ADR  *(unsigned int *)0x0f000000 /* 14 row addrs*/
-#define ROW13_ADR  *(unsigned int *)0x07000000 /* 13 row addrs*/
-#define ROW12_ADR  *(unsigned int *)0x03000000 /* 12 row addrs*/
-#define ROW11_ADR  *(unsigned int *)0x01000000 /* 11 row addrs/also bank switch*/
-#define ROW10_ADR  *(unsigned int *)0x00000000 /* 10 row addrs/also bank switch*/
-
-#define COL11_DATA 0x0b0b0b0b	/*  11 col addrs*/
-#define COL10_DATA 0x0a0a0a0a	/*  10 col data*/
-#define COL09_DATA 0x09090909	/*   9 col data*/
-#define COL08_DATA 0x08080808	/*   8 col data*/
-
-#define ROW14_DATA 0x3f3f3f3f	/*  14 row data (MASK)*/
-#define ROW13_DATA 0x1f1f1f1f	/*  13 row data (MASK)*/
-#define ROW12_DATA 0x0f0f0f0f	/*  12 row data (MASK)*/
-#define ROW11_DATA 0x07070707	/*  11 row data/also bank switch (MASK)*/
-#define ROW10_DATA 0xaaaaaaaa	/*  10 row data/also bank switch (MASK)*/
-
-void
-dummy_write(void){
-  volatile unsigned short *ptr = (volatile unsigned short *)CACHELINESZ;
-  *ptr = 0;
-}
-
-#include "drivers/pc80/udelay_io.c"
-
-static void dumpram(void){
-  print_err("ctl "); print_err_hex8(*drcctl); print_err("\n");
-  print_err("mctl "); print_err_hex8(*drcmctl); print_err("\n");
-  print_err("cfg "); print_err_hex8(*drccfg); print_err("\n");
-
-  print_err("bendadr0 "); print_err_hex8(*drcbendadr); print_err("\n");
-  print_err("bendadr1 "); print_err_hex8(*drcbendadr); print_err("\n");
-  print_err("bendadr2 "); print_err_hex8(*drcbendadr); print_err("\n");
-  print_err("bendadr3"); print_err_hex8(*drcbendadr); print_err("\n");
-}
-
-/* there is a lot of silliness in the amd code, and it is
- * causing romcc real headaches, so we're going to be be a little
- * less silly.
- * so, the order of ops is:
- * for i in 3 to 0
- * see if bank is there.
- * if we can write a word, and read it back, to hell with paranoia
- * the bank is there. So write the magic byte, read it back, and
- * use that to get size, etc. Try to keep things very simple,
- * so people can actually follow the damned code.
- */
-
-/* cache is assumed to be disabled */
-int sizemem(void)
-{
-
-	int rows,banks, cols, i, bank;
-	unsigned char al;
-	volatile unsigned long *lp = (volatile unsigned long *) CACHELINESZ;
-	unsigned long l;
-	/* initialize dram controller registers */
-	/* disable write buffer/read-ahead buffer */
-	*dbctl = 0;
-	/* no ecc interrupts of any kind. */
-	*eccctl = 0;
-	/* Set SDRAM timing for slowest speed. */
-	*drcmctl = 0x1e;
-
-	/* setup dram register for all banks
-	 * with max cols and max banks
-	 * this is the oldest trick in the book. You are going to set up for max rows
-	 * and cols, then do a write, then see if the data is wrapped to low memory.
-	 * you can actually tell by which data gets to which low memory,
-	 * exactly how many rows and cols you have.
-	 */
-	*drccfg=0xbbbb;
-
-	/* setup loop to do 4 external banks starting with bank 3 */
-	*drcbendadr=0x0ff000000;
-	/* for now, set it up for one loop of bank 0. Just to get it to go at all. */
-	*drcbendadr=0x0ff;
-
-	/* issue a NOP to all DRAMs */
-	/* Setup DRAM control register with Disable refresh,
- 	 * disable write buffer Test Mode and NOP command select
- 	 */
-	*drcctl=0x01;
-
-	/* dummy write for NOP to take effect */
-	dummy_write();
-	print_err("NOP\n");
-	/* 100? 200? */
-	udelay(100);
-	print_err("after udelay\n");
-
-	/* issue all banks precharge */
-	*drcctl=0x02;
-	print_err("set *drcctl to 2 \n");
-	dummy_write();
-	print_err("PRE\n");
-
-	/* issue 2 auto refreshes to all banks */
-	*drcctl=0x04;
-	dummy_write();
-	print_err("AUTO1\n");
-	dummy_write();
-	print_err("AUTO2\n");
-
-	/* issue LOAD MODE REGISTER command */
-	*drcctl=0x03;
-	dummy_write();
-	print_err("LOAD MODE REG\n");
-
-	*drcctl=0x04;
-	for (i=0; i<8; i++) /* refresh 8 times */{
-		dummy_write();
-		print_err("dummy write\n");
-	}
-	print_err("8 dummy writes\n");
-
-	/* set control register to NORMAL mode */
-	*drcctl=0x00;
-	print_err("normal\n");
-
-	print_err("HI done normal\n");
-
-	print_err("sizemem\n");
-	for(bank = 3; bank >= 0; bank--) {
-	  print_err("Try to assign to l\n");
-	  *lp = 0xdeadbeef;
-	  print_err("assigned l ... \n");
-	  if (*lp != 0xdeadbeef) {
-	    print_err(" no memory at bank ");
-	    // print_err_hex8(bank);
-	    //   print_err(" value "); print_err_hex32(*lp);
-	    print_err("\n");
-	    //	    continue;
-	  }
-	  *drcctl = 2;
-	  dummy_write();
-	  *drccfg = *drccfg >> 4;
-	  l = *drcbendadr;
-	  l >>= 8;
-	  *drcbendadr = l;
-	  print_err("loop around\n");
-	  *drcctl = 0;
-	  dummy_write();
-	}
-#if 0
-	/* enable last bank and setup ending address
-	 * register for max ram in last bank
-	 */
-	*drcbendadr=0x0ff000000;
-
-
-//	dumpram();
-
-	/* issue a NOP to all DRAMs */
-	/* Setup DRAM control register with Disable refresh,
- 	 * disable write buffer Test Mode and NOP command select
- 	 */
-	*drcctl=0x01;
-
-	/* dummy write for NOP to take effect */
-	dummy_write();
-	print_err("NOP\n");
-	/* 100? 200? */
-	//udelay(100);
-	print_err("after udelay\n");
-
-	/* issue all banks precharge */
-	*drcctl=0x02;
-	print_err("set *drcctl to 2 \n");
-	dummy_write();
-	print_err("PRE\n");
-
-	/* issue 2 auto refreshes to all banks */
-	*drcctl=0x04;
-	dummy_write();
-	print_err("AUTO1\n");
-	dummy_write();
-	print_err("AUTO2\n");
-
-	/* issue LOAD MODE REGISTER command */
-	*drcctl=0x03;
-	dummy_write();
-	print_err("LOAD MODE REG\n");
-
-	*drcctl=0x04;
-	for (i=0; i<8; i++) /* refresh 8 times */{
-		dummy_write();
-		print_err("dummy write\n");
-	}
-	print_err("8 dummy writes\n");
-
-	/* set control register to NORMAL mode */
-	*drcctl=0x00;
-	print_err("normal\n");
-
-	print_err("HI done normal\n");
-	bank = 3;
-
-
-	/* this is really ugly, it is right from assembly code.
-	 * we need to clean it up later
-	 */
-
-start:
-	/* write col 11 wrap adr */
-	COL11_ADR=COL11_DATA;
-	if(COL11_ADR!=COL11_DATA)
-		goto bad_ram;
-
-print_err("11\n");
-	/* write col 10 wrap adr */
-	COL10_ADR=COL10_DATA;
-	if(COL10_ADR!=COL10_DATA)
-		goto bad_ram;
-print_err("10\n");
-
-	/* write col 9 wrap adr */
-	COL09_ADR=COL09_DATA;
-	if(COL09_ADR!=COL09_DATA)
-		goto bad_ram;
-print_err("9\n");
-
-	/* write col 8 wrap adr */
-	COL08_ADR=COL08_DATA;
-	if(COL08_ADR!=COL08_DATA)
-		goto bad_ram;
-print_err("8\n");
-
-	/* write row 14 wrap adr */
-	ROW14_ADR=ROW14_DATA;
-	if(ROW14_ADR!=ROW14_DATA)
-		goto bad_ram;
-print_err("14\n");
-
-	/* write row 13 wrap adr */
-	ROW13_ADR=ROW13_DATA;
-	if(ROW13_ADR!=ROW13_DATA)
-		goto bad_ram;
-print_err("13\n");
-
-	/* write row 12 wrap adr */
-	ROW12_ADR=ROW12_DATA;
-	if(ROW12_ADR!=ROW12_DATA)
-		goto bad_ram;
-print_err("12\n");
-
-	/* write row 11 wrap adr */
-	ROW11_ADR=ROW11_DATA;
-	if(ROW11_ADR!=ROW11_DATA)
-		goto bad_ram;
-print_err("11\n");
-
-	/* write row 10 wrap adr */
-	ROW10_ADR=ROW10_DATA;
-	if(ROW10_ADR!=ROW10_DATA)
-		goto bad_ram;
-print_err("10\n");
-
-/*
- * read data @ row 12 wrap adr to determine # banks,
- *  and read data @ row 14 wrap adr to determine # rows.
- *  if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
- * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
- * if data @ row 12 wrap == 11 or 12, we have 4 banks
- */
-
-	banks=2;
-	if (ROW12_ADR != ROW10_DATA) {
-		banks=4;
-print_err("4b\n");
-		if(ROW12_ADR != ROW11_DATA) {
-			if(ROW12_ADR != ROW12_DATA)
-				goto bad_ram;
-		}
-	}
-
-	/* validate row mask */
-	rows=ROW14_ADR;
-	if (rows<ROW11_DATA)
-		goto bad_ram;
-	if (rows>ROW14_DATA)
-		goto bad_ram;
-	/* verify all 4 bytes of dword same */
-/*
-	if(rows&0xffff!=(rows>>16)&0xffff)
-		goto bad_ram;
-	if(rows&0xff!=(rows>>8)&0xff)
-		goto bad_ram;
-*/
-	/* now just get one of them */
-	rows &= 0xff;
-	print_err("rows"); print_err_hex32(rows); print_err("\n");
-	/* validate column data */
-	cols=COL11_ADR;
-	if(cols<COL08_DATA)
-		goto bad_ram;
-	if (cols>COL11_DATA)
-		goto bad_ram;
-	/* verify all 4 bytes of dword same */
-/*
-	if(cols&0xffff!=(cols>>16)&0xffff)
-		goto bad_ram;
-	if(cols&0xff!=(cols>>8)&0xff)
-		goto bad_ram;
-*/
-	print_err("cols"); print_err_hex32(cols); print_err("\n");
-	cols -= COL08_DATA;
-
-	/* cols now is in the range of 0 1 2 3 ...
-	 */
-	i = cols&3;
-	//	i = cols + rows;
-
-	/* wacky end addr calculation */
-/*
-	al = 3;
-	al -= (i & 0xff);k
- */
-
-	/* what a fookin' mess this is */
-	if(banks==4)
-		i+=8; /* <-- i holds merged value */
-	/* i now has the col width in bits 0-1 and the bank count (2 or 4)
-	 * in bit 3.
-	 * this is the format for the drccfg register
-	 */
-
-	/* fix ending addr mask*/
-	/*FIXME*/
-	/* let's just go with this to start ... see if we can get ANYWHERE */
-	/* need to get end addr. Need to do it with the bank in mind. */
-/*
-	al = 3;
-	al -= i&3;
-	*drcbendaddr = rows >> al;
-	print_err("computed ending_adr = "); print_err_hex8(ending_adr);
-	print_err("\n");
-
-*/
-bad_reinit:
-	/* issue all banks recharge */
-	*drcctl=0x02;
-	dummy_write();
-
-	/* update ending address register */
-//	*drcbendadr = ending_adr;
-
-	/* update config register */
-	*drccfg &= ~(0xff << bank*4);
-	if (ending_adr)
-	  *drccfg = ((banks == 4 ? 8 : 0) | cols & 3)<< (bank*4);
-//	dumpram();
-	/* skip the rest for now */
-	//	bank = 0;
-	//	*drccfg=*drccfg&YYY|ZZZZ;
-
-	if(bank!=0) {
-		bank--;
-//		drcbendaddr--;
-		*drcbendaddr = 0xff000000;
-		//*(&*drcbendadr+XXYYXX)=0xff;
-		goto start;
-	}
-
-	/* set control register to NORMAL mode */
-	*drcctl=0x18;
-	dummy_write();
-	return bank;
-
-bad_ram:
-	print_info("bad ram!\n");
-	/* you are here because the read-after-write failed,
-	 * in most cases because: no ram in that bank!
-	 * set badbank to 1 and go to reinit
-	 */
-	ending_adr = 0;
-	goto bad_reinit;
-	while(1)
-	print_err("DONE NEXTBANK\n");
-#endif
-}
-
-/* note: based on AMD code*/
-/* This code is known to work on the digital logic board and on the technologic
- * systems ts5300
- */
-int staticmem(void)
-{
-	volatile unsigned long *zero = (unsigned long *) CACHELINESZ;
-
-	/* set up 0x18 .. **/
-	*drcbendadr = 0x88;
-	*drcmctl = 0x1e;
-	*drccfg = 0x9;
-	/* nop mode */
-	*drcctl = 0x1;
-	/* do the dummy write */
-	*zero = 0;
-
-	/* precharge */
-	*drcctl = 2;
-	*zero = 0;
-
-	/* two autorefreshes */
-	*drcctl = 4;
-	*zero = 0;
-	print_debug("one zero out on refresh\n");
-	*zero = 0;
-	print_debug("two zero out on refresh\n");
-
-	/* load mode register */
-	*drcctl = 3;
-	*zero = 0;
-	print_debug("DONE the load mode reg\n");
-
-	/* normal mode */
-	*drcctl = 0x0;
-	*zero = 0;
-	print_debug("DONE one last write and then turn on refresh etc\n");
-	*drcctl = 0x18;
-	*zero = 0;
-	print_debug("DONE the normal\n");
-	*zero = 0xdeadbeef;
-	if (*zero != 0xdeadbeef)
-	  print_debug("NO LUCK\n");
-	else
-	  print_debug("did a store and load ...\n");
-	//print_err_hex32(*zero);
-	//	print_err(" zero is now "); print_err_hex32(*zero); print_err("\n");
-}
diff --git a/src/cpu/amd/sc520/sc520.c b/src/cpu/amd/sc520/sc520.c
deleted file mode 100644
index 05215447c0..0000000000
--- a/src/cpu/amd/sc520/sc520.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * This file needs a major cleanup. Too much #if 0 code
- */
-
-#include <console/console.h>
-#include <arch/io.h>
-#include <arch/ioapic.h>
-#include <stdint.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/hypertransport.h>
-#include <stdlib.h>
-#include <string.h>
-#include <delay.h>
-
-/*
- * set up basic things ...
- * PAR should NOT go here, as it might change with the mainboard.
- */
-static void cpu_init(device_t dev)
-{
-  unsigned long *l = (unsigned long *) 0xfffef088;
-  int i;
-  for(i = 0; i < 16; i++, l++)
-    printk(BIOS_ERR, "Par%d: 0x%lx\n", i, *l);
-
-  printk(BIOS_SPEW, "SC520 random fixup ...\n");
-}
-
-
-/* Ollie says: make a northbridge/amd/sc520. Ron sez:
- * there is no real northbridge, keep it here in cpu.
- * Ron wins, he's writing the code.
- */
-static void sc520_enable_resources(struct device *dev) {
-	unsigned char command;
-
-	printk(BIOS_SPEW, "%s\n", __func__);
-        command = pci_read_config8(dev, PCI_COMMAND);
-        printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command);
-        command |= PCI_COMMAND_MEMORY | PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-        printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command);
-        pci_write_config8(dev, PCI_COMMAND, command);
-        command = pci_read_config8(dev, PCI_COMMAND);
-        printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command);
-}
-
-static void sc520_read_resources(device_t dev)
-{
-	struct resource* res;
-
-	pci_dev_read_resources(dev);
-
-	res = new_resource(dev, 1);
-	res->base = 0x0UL;
-	res->size = 0x400UL;
-	res->limit = 0xffffUL;
-	res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-
-	res = new_resource(dev, 3); /* IOAPIC */
-	res->base = IO_APIC_ADDR;
-	res->size = 0x00001000;
-	res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-}
-
-
-static struct device_operations cpu_operations = {
-	.read_resources   = sc520_read_resources,
-	.set_resources    = pci_dev_set_resources,
-	.enable_resources = sc520_enable_resources,
-	.init             = cpu_init,
-	.enable           = 0,
-	.ops_pci          = 0,
-};
-
-static const struct pci_driver cpu_driver __pci_driver = {
-	.ops = &cpu_operations,
-	.vendor = PCI_VENDOR_ID_AMD,
-	.device = 0x3000
-};
-
-static void pci_domain_set_resources(device_t dev)
-{
-	device_t mc_dev;
-        uint32_t pci_tolm;
-  printk(BIOS_SPEW, "%s\n", __func__);
-        pci_tolm = find_pci_tolm(dev->link_list);
-	mc_dev = dev->link_list->children;
-	if (mc_dev) {
-		unsigned long tomk, tolmk;
-		//		unsigned char rambits;
-		// int i;
-		int idx;
-#if 0
-		for(rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) {
-			unsigned char reg;
-			reg = pci_read_config8(mc_dev, ramregs[i]);
-			/* these are ENDING addresses, not sizes.
-			 * if there is memory in this slot, then reg will be > rambits.
-			 * So we just take the max, that gives us total.
-			 * We take the highest one to cover for once and future coreboot
-			 * bugs. We warn about bugs.
-			 */
-			if (reg > rambits)
-				rambits = reg;
-			if (reg < rambits)
-				printk(BIOS_ERR, "ERROR! register 0x%x is not set!\n",
-					ramregs[i]);
-		}
-		printk(BIOS_DEBUG, "I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024);
-		tomk = rambits*8*1024;
-#endif
-		tomk = 32 * 1024;
-		/* Compute the top of Low memory */
-		tolmk = pci_tolm >> 10;
-		if (tolmk >= tomk) {
-			/* The PCI hole does does not overlap the memory.
-			 */
-			tolmk = tomk;
-		}
-		/* Report the memory regions */
-		idx = 10;
-		ram_resource(dev, idx++, 0, tolmk);
-	}
-	assign_resources(dev->link_list);
-}
-
-#if 0
-void sc520_enable_resources(device_t dev) {
-
-	printk(BIOS_SPEW, "%s\n", __func__);
-	printk(BIOS_SPEW, "THIS IS FOR THE SC520 =============================\n");
-
-/*
-	command = pci_read_config8(dev, PCI_COMMAND);
-	printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command);
-	command |= PCI_COMMAND_MEMORY;
-	printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command);
-	pci_write_config8(dev, PCI_COMMAND, command);
-	command = pci_read_config8(dev, PCI_COMMAND);
-	printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command);
- */
-	enable_childrens_resources(dev);
-	printk(BIOS_SPEW, "%s\n", __func__);
-}
-#endif
-
-static struct device_operations pci_domain_ops = {
-        .read_resources   = pci_domain_read_resources,
-        .set_resources    = pci_domain_set_resources,
-	/*
-	 * If enable_resources is set to the generic enable_resources
-	 * function the whole thing will hang in an endless loop on
-	 * the ts5300. If this is really needed on another platform,
-	 * something is conceptually wrong.
-	 */
-        .enable_resources = 0, //enable_resources,
-        .init             = 0,
-        .scan_bus         = pci_domain_scan_bus,
-        .ops_pci_bus      = pci_bus_default_ops,
-};
-
-#if 0
-static void cpu_bus_init(device_t dev)
-{
-  printk(BIOS_SPEW, "cpu_bus_init\n");
-}
-
-static struct device_operations cpu_bus_ops = {
-        .read_resources   = DEVICE_NOOP,
-        .set_resources    = DEVICE_NOOP,
-        .enable_resources = DEVICE_NOOP,
-        .init             = cpu_bus_init,
-        .scan_bus         = 0,
-};
-#endif
-
-static void enable_dev(struct device *dev)
-{
-  printk(BIOS_SPEW, "%s\n", __func__);
-        /* Set the operations if it is a special bus type */
-        if (dev->path.type == DEVICE_PATH_DOMAIN) {
-                dev->ops = &pci_domain_ops;
-        }
-#if 0
-	/* This is never hit as none of the sc520 boards have
-	 * an APIC cluster defined
-	 */
-        else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) {
-                dev->ops = &cpu_bus_ops;
-        }
-#endif
-}
-
-
-struct chip_operations cpu_amd_sc520_ops = {
-	CHIP_NAME("AMD Elan SC520 CPU")
-	.enable_dev = enable_dev,
-};