diff options
author | Hung-Te Lin <hungte@chromium.org> | 2013-09-27 12:45:45 +0800 |
---|---|---|
committer | Isaac Christensen <isaac.christensen@se-eng.com> | 2014-08-26 17:55:18 +0200 |
commit | 22d0ca0ceb802675cdcab1472b8477066f729373 (patch) | |
tree | 79e2e38a2c6b34125f48b05cfd7f9ef3c88c833d /src/cpu/samsung/exynos5420/uart.c | |
parent | b123e0d3345554d7e93361bb4511a53bc95d41a1 (diff) |
armv7: Move Exynos from 'cpu' to 'soc'.
The Exynos family and most ARM products are SoC, not just CPU.
We used to put ARM code in src/cpu to avoid polluting the code base for what was
essentially an experiment at the time. Now that it's past the experimental phase
and we're going to see more SoCs (including intel/baytrail) in coreboot.
Change-Id: I5ea1f822664244edf5f77087bc8018d7c535f81c
Reviewed-on: https://chromium-review.googlesource.com/170891
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit c8bb8fe0b20be37465f93c738d80e7e43033670a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6739
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src/cpu/samsung/exynos5420/uart.c')
-rw-r--r-- | src/cpu/samsung/exynos5420/uart.c | 194 |
1 files changed, 0 insertions, 194 deletions
diff --git a/src/cpu/samsung/exynos5420/uart.c b/src/cpu/samsung/exynos5420/uart.c deleted file mode 100644 index be96d5b86c..0000000000 --- a/src/cpu/samsung/exynos5420/uart.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <console/uart.h> -#include <arch/io.h> -#include <boot/coreboot_tables.h> -#include "uart.h" -#include "clk.h" -#include "cpu.h" -#include "periph.h" -#include "uart.h" - -#define RX_FIFO_COUNT_MASK 0xff -#define RX_FIFO_FULL_MASK (1 << 8) -#define TX_FIFO_FULL_MASK (1 << 24) - - -/* - * The coefficient, used to calculate the baudrate on S5P UARTs is - * calculated as - * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT - * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1, - * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants: - */ -static const int udivslot[] = { - 0, - 0x0080, - 0x0808, - 0x0888, - 0x2222, - 0x4924, - 0x4a52, - 0x54aa, - 0x5555, - 0xd555, - 0xd5d5, - 0xddd5, - 0xdddd, - 0xdfdd, - 0xdfdf, - 0xffdf, -}; - -static void serial_setbrg_dev(struct s5p_uart *uart) -{ - u32 uclk; - u32 val; - - // All UARTs share the same clock. - uclk = clock_get_periph_rate(PERIPH_ID_UART3); - val = uclk / default_baudrate(); - - writel(val / 16 - 1, &uart->ubrdiv); - - /* - * FIXME(dhendrix): the original uart.h had a "br_rest" value which - * does not seem relevant to the exynos5420... not entirely sure - * where/if we need to worry about it here - */ -#if 0 - if (s5p_uart_divslot()) - writel(udivslot[val % 16], &uart->rest.slot); - else - writeb(val % 16, &uart->rest.value); -#endif -} - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - */ -static void exynos5_init_dev(struct s5p_uart *uart) -{ - /* enable FIFOs */ - writel(0x1, &uart->ufcon); - writel(0, &uart->umcon); - /* 8N1 */ - writel(0x3, &uart->ulcon); - /* No interrupts, no DMA, pure polling */ - writel(0x245, &uart->ucon); - - serial_setbrg_dev(uart); -} - -static int exynos5_uart_err_check(struct s5p_uart *uart, int op) -{ - unsigned int mask; - - /* - * UERSTAT - * Break Detect [3] - * Frame Err [2] : receive operation - * Parity Err [1] : receive operation - * Overrun Err [0] : receive operation - */ - if (op) - mask = 0x8; - else - mask = 0xf; - - return readl(&uart->uerstat) & mask; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart) -{ - /* wait for character to arrive */ - while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK | - RX_FIFO_FULL_MASK))) { - if (exynos5_uart_err_check(uart, 0)) - return 0; - } - - return readb(&uart->urxh) & 0xff; -} - -/* - * Output a single byte to the serial port. - */ -static void exynos5_uart_tx_byte(struct s5p_uart *uart, unsigned char data) -{ - /* wait for room in the tx FIFO */ - while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) { - if (exynos5_uart_err_check(uart, 1)) - return; - } - - writeb(data, &uart->utxh); -} - -unsigned int uart_platform_base(int idx) -{ - if (idx < 4) - return 0x12c00000 + idx * 0x10000; - else - return 0; -} - -void uart_init(int idx) -{ - struct s5p_uart *uart = uart_platform_baseptr(idx); - exynos5_init_dev(uart); -} - -unsigned char uart_rx_byte(int idx) -{ - struct s5p_uart *uart = uart_platform_baseptr(idx); - return exynos5_uart_rx_byte(uart); -} - -void uart_tx_byte(int idx, unsigned char data) -{ - struct s5p_uart *uart = uart_platform_baseptr(idx); - exynos5_uart_tx_byte(uart, data); -} - -void uart_tx_flush(int idx) -{ - /* Exynos5250 implements this too. */ -} - -#ifndef __PRE_RAM__ -void uart_fill_lb(void *data) -{ - struct lb_serial serial; - serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; - serial.baseaddr = uart_platform_base(CONFIG_UART_FOR_CONSOLE); - serial.baud = default_baudrate(); - lb_add_serial(&serial, data); - - lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data); -} -#endif |