This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

28 files changed, 180 insertions, 180 deletions

diff --git a/src/cpu/amd/car/cache_as_ram.inc b/src/cpu/amd/car/cache_as_ram.inc
index 94990a66f7..50b78d0c92 100644
--- a/src/cpu/amd/car/cache_as_ram.inc
+++ b/src/cpu/amd/car/cache_as_ram.inc
@@ -18,13 +18,13 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
-#define CacheSize DCACHE_RAM_SIZE
+#define CacheSize CONFIG_DCACHE_RAM_SIZE
 #define CacheBase (0xd0000 - CacheSize)
 
 /* leave some space for global variable to pass to RAM stage */
-#define GlobalVarSize DCACHE_RAM_GLOBAL_VAR_SIZE
+#define GlobalVarSize CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
 
-/* for CAR_FAM10 */
+/* for CONFIG_CAR_FAM10 */
 #define CacheSizeAPStack 0x400 /* 1K */
 
 #define MSR_FAM10      0xC001102A
@@ -72,7 +72,7 @@ cache_as_ram_setup:
 	cvtsd2si %xmm3, %ebx
 
 	/* hope we can skip the double set for normal part */
-#if ((HAVE_FAILOVER_BOOT == 1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT == 0) && (USE_FALLBACK_IMAGE == 1))
+#if ((CONFIG_HAVE_FAILOVER_BOOT == 1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT == 0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
 
 	/* check if cpu_init_detected */
 	movl	$MTRRdefType_MSR, %ecx
@@ -248,10 +248,10 @@ clear_fixed_var_mtrr_out:
 	xorl	%edx, %edx
 	movl	$(((CONFIG_LB_MEM_TOPK << 10) + TOP_MEM_MASK) & ~TOP_MEM_MASK) , %eax
 	wrmsr
-#endif /*  USE_FAILOVER_IMAGE == 1*/
+#endif /*  CONFIG_USE_FAILOVER_IMAGE == 1*/
 
 
-#if ((HAVE_FAILOVER_BOOT == 1) && (USE_FAILOVER_IMAGE == 0)) || ((HAVE_FAILOVER_BOOT == 0) && (USE_FALLBACK_IMAGE == 0))
+#if ((CONFIG_HAVE_FAILOVER_BOOT == 1) && (CONFIG_USE_FAILOVER_IMAGE == 0)) || ((CONFIG_HAVE_FAILOVER_BOOT == 0) && (CONFIG_USE_FALLBACK_IMAGE == 0))
 	/* disable cache */
 	movl	%cr0, %eax
 	orl		$(1 << 30),%eax
@@ -259,25 +259,25 @@ clear_fixed_var_mtrr_out:
 
 #endif
 
-#if defined(XIP_ROM_SIZE) && defined(XIP_ROM_BASE)
+#if defined(CONFIG_XIP_ROM_SIZE) && defined(CONFIG_XIP_ROM_BASE)
 	/* enable write base caching so we can do execute in place
 	 * on the flash rom.
 	 */
 	movl	$0x202, %ecx
 	xorl	%edx, %edx
-	movl	$(XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax
+	movl	$(CONFIG_XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax
 	wrmsr
 
 	movl	$0x203, %ecx
-	movl	$0xff, %edx /* (1 << (CPU_ADDR_BITS - 32)) - 1 for K8 (CPU_ADDR_BITS = 40) */
+	movl	$0xff, %edx /* (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1 for K8 (CONFIG_CPU_ADDR_BITS = 40) */
 	jmp_if_k8(wbcache_post_fam10_setup)
-	movl	$0xffff, %edx /* (1 << (CPU_ADDR_BITS - 32)) - 1 for FAM10 (CPU_ADDR_BITS = 48) */
+	movl	$0xffff, %edx /* (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1 for FAM10 (CONFIG_CPU_ADDR_BITS = 48) */
 wbcache_post_fam10_setup:
-	movl	$(~(XIP_ROM_SIZE - 1) | 0x800), %eax
+	movl	$(~(CONFIG_XIP_ROM_SIZE - 1) | 0x800), %eax
 	wrmsr
-#endif /* XIP_ROM_SIZE && XIP_ROM_BASE */
+#endif /* CONFIG_XIP_ROM_SIZE && CONFIG_XIP_ROM_BASE */
 
-#if ((HAVE_FAILOVER_BOOT == 1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT == 0) && (USE_FALLBACK_IMAGE == 1))
+#if ((CONFIG_HAVE_FAILOVER_BOOT == 1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT == 0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
 	/* Set the default memory type and enable fixed and variable MTRRs */
 	movl	$MTRRdefType_MSR, %ecx
 	xorl	%edx, %edx
@@ -313,7 +313,7 @@ fam10_end_part1:
 	movb	$0xA2, %al
 	outb	%al, $0x80
 
-#if ((HAVE_FAILOVER_BOOT == 1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT == 0) && (USE_FALLBACK_IMAGE == 1))
+#if ((CONFIG_HAVE_FAILOVER_BOOT == 1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT == 0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
 		/* Read the range with lodsl*/
 	cld
 	movl	$CacheBase, %esi
@@ -325,7 +325,7 @@ fam10_end_part1:
 	xorl	%eax, %eax
 	rep		stosl
 
-#endif /*USE_FAILOVER_IMAGE == 1*/
+#endif /*CONFIG_USE_FAILOVER_IMAGE == 1*/
 
 	/* set up the stack pointer */
 	movl	$(CacheBase + CacheSize - GlobalVarSize), %eax
diff --git a/src/cpu/amd/car/clear_init_ram.c b/src/cpu/amd/car/clear_init_ram.c
index 8b97129ec6..0b50480142 100644
--- a/src/cpu/amd/car/clear_init_ram.c
+++ b/src/cpu/amd/car/clear_init_ram.c
@@ -7,11 +7,11 @@ static void __attribute__((noinline)) clear_init_ram(void)
 	// will reuse %edi as 0 from clear_memory for copy_and_run part, actually it is increased already
 	// so noline clear_init_ram
 
-#if HAVE_ACPI_RESUME == 1
+#if CONFIG_HAVE_ACPI_RESUME == 1
 	/* clear only coreboot used region of memory. Note: this may break ECC enabled boards */
-	clear_memory( _RAMBASE,  (CONFIG_LB_MEM_TOPK << 10) -  _RAMBASE - DCACHE_RAM_SIZE);
+	clear_memory( CONFIG_RAMBASE,  (CONFIG_LB_MEM_TOPK << 10) -  CONFIG_RAMBASE - CONFIG_DCACHE_RAM_SIZE);
 #else
-        clear_memory(0,  ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_SIZE));
+        clear_memory(0,  ((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_SIZE));
 #endif
 }
 
diff --git a/src/cpu/amd/car/copy_and_run.c b/src/cpu/amd/car/copy_and_run.c
index 437b91d4ac..f495f6dbba 100644
--- a/src/cpu/amd/car/copy_and_run.c
+++ b/src/cpu/amd/car/copy_and_run.c
@@ -8,7 +8,7 @@ void cbfs_and_run_core(char*, unsigned ebp);
 
 static void copy_and_run(void)
 {
-# if USE_FALLBACK_IMAGE == 1
+# if CONFIG_USE_FALLBACK_IMAGE == 1
 	cbfs_and_run_core("fallback/coreboot_ram", 0);
 # else
       	cbfs_and_run_core("normal/coreboot_ram", 0);
@@ -19,7 +19,7 @@ static void copy_and_run(void)
 
 static void copy_and_run_ap_code_in_car(unsigned ret_addr)
 {
-# if USE_FALLBACK_IMAGE == 1
+# if CONFIG_USE_FALLBACK_IMAGE == 1
 	cbfs_and_run_core("fallback/coreboot_apc", ret_addr);
 # else
       	cbfs_and_run_core("normal/coreboot_apc", ret_addr);
diff --git a/src/cpu/amd/car/disable_cache_as_ram.c b/src/cpu/amd/car/disable_cache_as_ram.c
index 0f5f831270..a5113474d3 100644
--- a/src/cpu/amd/car/disable_cache_as_ram.c
+++ b/src/cpu/amd/car/disable_cache_as_ram.c
@@ -16,7 +16,7 @@ static inline __attribute__((always_inline)) void disable_cache_as_ram(void)
         "xorl    %edx, %edx\n\t"
         "xorl    %eax, %eax\n\t"
 	"wrmsr\n\t"
-#if DCACHE_RAM_SIZE > 0x8000
+#if CONFIG_DCACHE_RAM_SIZE > 0x8000
 	"movl    $0x268, %ecx\n\t"  /* fix4k_c0000*/
         "wrmsr\n\t"
 #endif
diff --git a/src/cpu/amd/car/post_cache_as_ram.c b/src/cpu/amd/car/post_cache_as_ram.c
index 89366e0e33..9e988f02be 100644
--- a/src/cpu/amd/car/post_cache_as_ram.c
+++ b/src/cpu/amd/car/post_cache_as_ram.c
@@ -64,7 +64,7 @@ static void post_cache_as_ram(void)
 	
 	set_init_ram_access(); /* So we can access RAM from [1M, CONFIG_LB_MEM_TOPK) */
 
-//	dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x8000, DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x7c00);
+//	dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x8000, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x7c00);
 	print_debug("Copying data from cache to RAM -- switching to use RAM as stack... ");
 
 	/* from here don't store more data in CAR */
@@ -76,14 +76,14 @@ static void post_cache_as_ram(void)
         );
 #endif
 
-        memcopy((void *)((CONFIG_LB_MEM_TOPK<<10)-DCACHE_RAM_SIZE), (void *)DCACHE_RAM_BASE, DCACHE_RAM_SIZE); //inline
+        memcopy((void *)((CONFIG_LB_MEM_TOPK<<10)-CONFIG_DCACHE_RAM_SIZE), (void *)CONFIG_DCACHE_RAM_BASE, CONFIG_DCACHE_RAM_SIZE); //inline
 //        dump_mem((CONFIG_LB_MEM_TOPK<<10) - 0x8000, (CONFIG_LB_MEM_TOPK<<10) - 0x7c00);
 
         __asm__ volatile (
-                /* set new esp */ /* before _RAMBASE */
+                /* set new esp */ /* before CONFIG_RAMBASE */
                 "subl   %0, %%ebp\n\t"
                 "subl   %0, %%esp\n\t"
-                ::"a"( (DCACHE_RAM_BASE + DCACHE_RAM_SIZE)- (CONFIG_LB_MEM_TOPK<<10) )
+                ::"a"( (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)- (CONFIG_LB_MEM_TOPK<<10) )
         ); // We need to push %eax to the stack (CAR) before copy stack and pop it later after copy stack and change esp
 #if 0
         __asm__ volatile (
@@ -102,18 +102,18 @@ static void post_cache_as_ram(void)
 	disable_cache_as_ram_bsp();  
 
         print_debug("Clearing initial memory region: ");
-        clear_init_ram(); //except the range from [(CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_SIZE, (CONFIG_LB_MEM_TOPK<<10))
+        clear_init_ram(); //except the range from [(CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_SIZE, (CONFIG_LB_MEM_TOPK<<10))
         print_debug("Done\r\n");
 
 //	dump_mem((CONFIG_LB_MEM_TOPK<<10) - 0x8000, (CONFIG_LB_MEM_TOPK<<10) - 0x7c00);
 
-#ifndef MEM_TRAIN_SEQ
-#define MEM_TRAIN_SEQ 0
+#ifndef CONFIG_MEM_TRAIN_SEQ
+#define CONFIG_MEM_TRAIN_SEQ 0
 #endif
         set_sysinfo_in_ram(1); // So other core0 could start to train mem
 
-#if MEM_TRAIN_SEQ == 1
-//	struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE);
+#if CONFIG_MEM_TRAIN_SEQ == 1
+//	struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 
         // wait for ap memory to trained
 //        wait_all_core0_mem_trained(sysinfox); // moved to lapic_init_cpus.c
diff --git a/src/cpu/amd/dualcore/amd_sibling.c b/src/cpu/amd/dualcore/amd_sibling.c
index 899b859d4f..8401818fb6 100644
--- a/src/cpu/amd/dualcore/amd_sibling.c
+++ b/src/cpu/amd/dualcore/amd_sibling.c
@@ -110,7 +110,7 @@ unsigned get_apicid_base(unsigned ioapic_num)
 
 	if((apicid_base+ioapic_num-1)>0xf) {
 		// We need to enable APIC EXT ID
-		printk_info("if the IO APIC device doesn't support 256 apic id, \r\n you need to set ENABLE_APIC_EXT_ID in auto.c so you can spare 16 id for ioapic\r\n");
+		printk_info("if the IO APIC device doesn't support 256 apic id, \r\n you need to set CONFIG_ENABLE_APIC_EXT_ID in auto.c so you can spare 16 id for ioapic\r\n");
 		enable_apic_ext_id(nodes);
 	}
 	
diff --git a/src/cpu/amd/dualcore/dualcore.c b/src/cpu/amd/dualcore/dualcore.c
index 5a61fac699..331c75909a 100644
--- a/src/cpu/amd/dualcore/dualcore.c
+++ b/src/cpu/amd/dualcore/dualcore.c
@@ -19,7 +19,7 @@ static inline unsigned get_core_num_in_bsp(unsigned nodeid)
 #if SET_NB_CFG_54 == 1
 static inline uint8_t set_apicid_cpuid_lo(void)
 {
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
         if(is_cpu_pre_e0()) return 0; // pre_e0 can not be set
 #endif
 
@@ -56,7 +56,7 @@ static inline void start_other_cores(void)
 	unsigned nodes;
 	unsigned nodeid;
 
-	if (HAVE_OPTION_TABLE &&
+	if (CONFIG_HAVE_OPTION_TABLE &&
 	    read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) != 0)  {
 		return; // disable dual_core
 	}
@@ -70,7 +70,7 @@ static inline void start_other_cores(void)
 	}
 
 }
-#if USE_DCACHE_RAM == 0
+#if CONFIG_USE_DCACHE_RAM == 0
 static void do_k8_init_and_stop_secondaries(void)
 {
 	struct node_core_id id;
@@ -106,22 +106,22 @@ static void do_k8_init_and_stop_secondaries(void)
 	pci_write_config32(dev_f0, 0x68, val);
 
 	/* Set the lapicid */
-        #if (ENABLE_APIC_EXT_ID == 1)
+        #if (CONFIG_ENABLE_APIC_EXT_ID == 1)
                 unsigned initial_apicid = get_initial_apicid();
-                #if LIFT_BSP_APIC_ID == 0
+                #if CONFIG_LIFT_BSP_APIC_ID == 0
                 if( initial_apicid != 0 ) // other than bsp
                 #endif
                 {
                                 /* use initial apic id to lift it */
                                 uint32_t dword = lapic_read(LAPIC_ID);
                                 dword &= ~(0xff<<24);
-                                dword |= (((initial_apicid + APIC_ID_OFFSET) & 0xff)<<24);
+                                dword |= (((initial_apicid + CONFIG_APIC_ID_OFFSET) & 0xff)<<24);
 
                                 lapic_write(LAPIC_ID, dword);
                 }
 
-                #if LIFT_BSP_APIC_ID == 1
-                bsp_apicid += APIC_ID_OFFSET;
+                #if CONFIG_LIFT_BSP_APIC_ID == 1
+                bsp_apicid += CONFIG_APIC_ID_OFFSET;
                 #endif
 
         #endif
diff --git a/src/cpu/amd/model_10xxx/Config.lb b/src/cpu/amd/model_10xxx/Config.lb
index 47303be0e8..884f1e84f4 100644
--- a/src/cpu/amd/model_10xxx/Config.lb
+++ b/src/cpu/amd/model_10xxx/Config.lb
@@ -17,13 +17,13 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 #
 
-uses HAVE_INIT_TIMER
-uses HAVE_MOVNTI
-uses CPU_ADDR_BITS
+uses CONFIG_HAVE_INIT_TIMER
+uses CONFIG_HAVE_MOVNTI
+uses CONFIG_CPU_ADDR_BITS
 
-default HAVE_INIT_TIMER=1
-default HAVE_MOVNTI=1
-default CPU_ADDR_BITS=48
+default CONFIG_HAVE_INIT_TIMER=1
+default CONFIG_HAVE_MOVNTI=1
+default CONFIG_CPU_ADDR_BITS=48
 dir /cpu/x86/tsc
 dir /cpu/x86/fpu
 dir /cpu/x86/mmx
diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c
index 92eb2de0c8..66959839c2 100644
--- a/src/cpu/amd/model_10xxx/init_cpus.c
+++ b/src/cpu/amd/model_10xxx/init_cpus.c
@@ -19,7 +19,7 @@
 
 #include "defaults.h"
 
-//it takes the ENABLE_APIC_EXT_ID and APIC_ID_OFFSET and LIFT_BSP_APIC_ID
+//it takes the CONFIG_ENABLE_APIC_EXT_ID and CONFIG_APIC_ID_OFFSET and CONFIG_LIFT_BSP_APIC_ID
 #ifndef FAM10_SET_FIDVID
 	#define FAM10_SET_FIDVID 1
 #endif
@@ -58,13 +58,13 @@ static void prep_fid_change(void);
 static void init_fidvid_stage2(u32 apicid, u32 nodeid);
 void cpuSetAMDMSR(void);
 
-#if PCI_IO_CFG_EXT == 1
+#if CONFIG_PCI_IO_CFG_EXT == 1
 static void set_EnableCf8ExtCfg(void)
 {
 	// set the NB_CFG[46]=1;
 	msr_t msr;
 	msr = rdmsr(NB_CFG_MSR);
-	// EnableCf8ExtCfg: We need that to access PCI_IO_CFG_EXT 4K range
+	// EnableCf8ExtCfg: We need that to access CONFIG_PCI_IO_CFG_EXT 4K range
 	msr.hi |= (1<<(46-32));
 	wrmsr(NB_CFG_MSR, msr);
 }
@@ -80,12 +80,12 @@ static void set_EnableCf8ExtCfg(void) { }
 
 static void set_pci_mmio_conf_reg(void)
 {
-#if MMCONF_SUPPORT
+#if CONFIG_MMCONF_SUPPORT
 	msr_t msr;
 	msr = rdmsr(0xc0010058);
 	msr.lo &= ~(0xfff00000 | (0xf << 2));
 	// 256 bus per segment, MMIO reg will be 4G , enable MMIO Config space
-	msr.lo |= ((8+PCI_BUS_SEGN_BITS) << 2) | (1 << 0);
+	msr.lo |= ((8+CONFIG_PCI_BUS_SEGN_BITS) << 2) | (1 << 0);
 	msr.hi &= ~(0x0000ffff);
 	msr.hi |= (PCI_MMIO_BASE >> (32-8));
 	wrmsr(0xc0010058, msr); // MMIO Config Base Address Reg
@@ -168,11 +168,11 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range,
 		for (j = jstart; j <= jend; j++) {
 			ap_apicid = i * (nb_cfg_54 ? (siblings + 1):1) + j * (nb_cfg_54 ? 1:64);
 
-		#if (ENABLE_APIC_EXT_ID == 1) && (APIC_ID_OFFSET > 0)
-			#if LIFT_BSP_APIC_ID == 0
+		#if (CONFIG_ENABLE_APIC_EXT_ID == 1) && (CONFIG_APIC_ID_OFFSET > 0)
+			#if CONFIG_LIFT_BSP_APIC_ID == 0
 			if( (i != 0) || (j != 0)) /* except bsp */
 			#endif
-				ap_apicid += APIC_ID_OFFSET;
+				ap_apicid += CONFIG_APIC_ID_OFFSET;
 		#endif
 
 			if(ap_apicid == bsp_apicid) continue;
@@ -307,8 +307,8 @@ static void STOP_CAR_AND_CPU()
 }
 
 
-#ifndef MEM_TRAIN_SEQ
-#define MEM_TRAIN_SEQ 0
+#ifndef CONFIG_MEM_TRAIN_SEQ
+#define CONFIG_MEM_TRAIN_SEQ 0
 #endif
 
 #if RAMINIT_SYSINFO == 1
@@ -337,7 +337,7 @@ static u32 init_cpus(u32 cpu_init_detectedx)
 	if(id.coreid == 0) {
 		set_apicid_cpuid_lo(); /* only set it on core0 */
 		set_EnableCf8ExtCfg(); /* only set it on core0 */
-		#if (ENABLE_APIC_EXT_ID == 1)
+		#if (CONFIG_ENABLE_APIC_EXT_ID == 1)
 		enable_apic_ext_id(id.nodeid);
 		#endif
 	}
@@ -345,23 +345,23 @@ static u32 init_cpus(u32 cpu_init_detectedx)
 	enable_lapic();
 
 
-#if (ENABLE_APIC_EXT_ID == 1) && (APIC_ID_OFFSET > 0)
+#if (CONFIG_ENABLE_APIC_EXT_ID == 1) && (CONFIG_APIC_ID_OFFSET > 0)
 	u32 initial_apicid = get_initial_apicid();
 
-	#if LIFT_BSP_APIC_ID == 0
+	#if CONFIG_LIFT_BSP_APIC_ID == 0
 	if( initial_apicid != 0 ) // other than bsp
 	#endif
 	{
 		/* use initial apic id to lift it */
 		u32 dword = lapic_read(LAPIC_ID);
 		dword &= ~(0xff << 24);
-		dword |= (((initial_apicid + APIC_ID_OFFSET) & 0xff) << 24);
+		dword |= (((initial_apicid + CONFIG_APIC_ID_OFFSET) & 0xff) << 24);
 
 		lapic_write(LAPIC_ID, dword);
 	}
 
-	#if LIFT_BSP_APIC_ID == 1
-	bsp_apicid += APIC_ID_OFFSET;
+	#if CONFIG_LIFT_BSP_APIC_ID == 1
+	bsp_apicid += CONFIG_APIC_ID_OFFSET;
 	#endif
 
 #endif
@@ -478,8 +478,8 @@ static void start_node(u8 node)
 	/* Enable routing table */
 	printk_debug("Start node %02x", node);
 
-#if CAR_FAM10 == 1
-	/* For CAR_FAM10 support, we need to set Dram base/limit for the new node */
+#if CONFIG_CAR_FAM10 == 1
+	/* For CONFIG_CAR_FAM10 support, we need to set Dram base/limit for the new node */
 	pci_write_config32(NODE_MP(node), 0x44, 0);
 	pci_write_config32(NODE_MP(node), 0x40, 3);
 #endif
diff --git a/src/cpu/amd/model_10xxx/update_microcode.c b/src/cpu/amd/model_10xxx/update_microcode.c
index f7f717d110..f996247d8d 100644
--- a/src/cpu/amd/model_10xxx/update_microcode.c
+++ b/src/cpu/amd/model_10xxx/update_microcode.c
@@ -47,7 +47,7 @@ static const u8 microcode_updates[] __attribute__ ((aligned(16))) = {
  * 00100F62h (DA-C2)     1062h                  0100009Fh
  */
 
-#include AMD_UCODE_PATCH_FILE
+#include CONFIG_AMD_UCODE_PATCH_FILE
 
 #endif
 	/*  Dummy terminator  */
diff --git a/src/cpu/amd/model_fxx/Config.lb b/src/cpu/amd/model_fxx/Config.lb
index 550716bc38..28ba85f8a9 100644
--- a/src/cpu/amd/model_fxx/Config.lb
+++ b/src/cpu/amd/model_fxx/Config.lb
@@ -1,10 +1,10 @@
-uses HAVE_INIT_TIMER
-uses HAVE_MOVNTI
-uses CPU_ADDR_BITS
+uses CONFIG_HAVE_INIT_TIMER
+uses CONFIG_HAVE_MOVNTI
+uses CONFIG_CPU_ADDR_BITS
 
-default HAVE_INIT_TIMER=1
-default HAVE_MOVNTI=1
-default CPU_ADDR_BITS=40
+default CONFIG_HAVE_INIT_TIMER=1
+default CONFIG_HAVE_MOVNTI=1
+default CONFIG_CPU_ADDR_BITS=40
 dir /cpu/x86/tsc
 dir /cpu/x86/fpu
 dir /cpu/x86/mmx
diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c
index f0f7b7fdd2..f079776f25 100644
--- a/src/cpu/amd/model_fxx/fidvid.c
+++ b/src/cpu/amd/model_fxx/fidvid.c
@@ -73,7 +73,7 @@ static void enable_fid_change(void)
 //		dword = 0x00070000; /* enable FID/VID change */
 		pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x80, dword);
 
-#if HAVE_ACPI_RESUME
+#if CONFIG_HAVE_ACPI_RESUME
 		dword = 0x21132113;
 #else
 		dword = 0x00132113;
diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c
index 8b613a624e..435167e94a 100644
--- a/src/cpu/amd/model_fxx/init_cpus.c
+++ b/src/cpu/amd/model_fxx/init_cpus.c
@@ -1,6 +1,6 @@
-//it takes the ENABLE_APIC_EXT_ID and APIC_ID_OFFSET and LIFT_BSP_APIC_ID
+//it takes the CONFIG_ENABLE_APIC_EXT_ID and CONFIG_APIC_ID_OFFSET and CONFIG_LIFT_BSP_APIC_ID
 #ifndef K8_SET_FIDVID
-	#if K8_REV_F_SUPPORT == 0
+	#if CONFIG_K8_REV_F_SUPPORT == 0
 		#define K8_SET_FIDVID 0
 	#else
 		// for rev F, need to set FID to max
@@ -72,7 +72,7 @@ static void for_each_ap(unsigned bsp_apicid, unsigned core_range, process_ap_t p
 	nodes = get_nodes();
 
         disable_siblings = !CONFIG_LOGICAL_CPUS;
-#if CONFIG_LOGICAL_CPUS == 1 && HAVE_OPTION_TABLE == 1
+#if CONFIG_LOGICAL_CPUS == 1 && CONFIG_HAVE_OPTION_TABLE == 1
         if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) != 0) { // 0 mean dual core
                 disable_siblings = 1;
         }
@@ -87,7 +87,7 @@ static void for_each_ap(unsigned bsp_apicid, unsigned core_range, process_ap_t p
                 j = ((pci_read_config32(PCI_DEV(0, 0x18+i, 3), 0xe8) >> 12) & 3);
                 if(nb_cfg_54) {
  	               if(j == 0 ){ // if it is single core, we need to increase siblings for apic calculation 
-                       #if K8_REV_F_SUPPORT == 0
+                       #if CONFIG_K8_REV_F_SUPPORT == 0
         	               e0_later_single_core = is_e0_later_in_bsp(i);  // single core
                        #else
                                e0_later_single_core = is_cpu_f0_in_bsp(i);  // We can read cpuid(1) from Func3
@@ -119,11 +119,11 @@ static void for_each_ap(unsigned bsp_apicid, unsigned core_range, process_ap_t p
 
                         ap_apicid = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:8);
 
-                #if (ENABLE_APIC_EXT_ID == 1)
-			#if LIFT_BSP_APIC_ID == 0
+                #if (CONFIG_ENABLE_APIC_EXT_ID == 1)
+			#if CONFIG_LIFT_BSP_APIC_ID == 0
 			if( (i!=0) || (j!=0)) /* except bsp */
 			#endif
-                        	ap_apicid += APIC_ID_OFFSET;
+                        	ap_apicid += CONFIG_APIC_ID_OFFSET;
                 #endif
 
 			if(ap_apicid == bsp_apicid) continue;
@@ -238,12 +238,12 @@ static void STOP_CAR_AND_CPU(void)
 	stop_this_cpu(); // inline, it will stop all cores except node0/core0 the bsp ....
 }
 
-#ifndef MEM_TRAIN_SEQ
-#define MEM_TRAIN_SEQ 0
+#ifndef CONFIG_MEM_TRAIN_SEQ
+#define CONFIG_MEM_TRAIN_SEQ 0
 #endif
 
 
-#if MEM_TRAIN_SEQ == 1
+#if CONFIG_MEM_TRAIN_SEQ == 1
 static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct sys_info *sysinfo, unsigned retcall); 
 #endif
 
@@ -268,7 +268,7 @@ static unsigned init_cpus(unsigned cpu_init_detectedx)
                 /* NB_CFG MSR is shared between cores, so we need make sure core0 is done at first --- use wait_all_core0_started  */
 		if(id.coreid == 0) {
                 	set_apicid_cpuid_lo(); /* only set it on core0 */
-			#if ENABLE_APIC_EXT_ID == 1
+			#if CONFIG_ENABLE_APIC_EXT_ID == 1
                         enable_apic_ext_id(id.nodeid);
 			#endif
                 }
@@ -276,22 +276,22 @@ static unsigned init_cpus(unsigned cpu_init_detectedx)
 		enable_lapic();
 //              init_timer(); // We need TMICT to pass msg for FID/VID change
 
-        #if (ENABLE_APIC_EXT_ID == 1)
+        #if (CONFIG_ENABLE_APIC_EXT_ID == 1)
 		unsigned initial_apicid = get_initial_apicid();	
-                #if LIFT_BSP_APIC_ID == 0
+                #if CONFIG_LIFT_BSP_APIC_ID == 0
                 if( initial_apicid != 0 ) // other than bsp
                 #endif
                 {
                                 /* use initial apic id to lift it */
                                 uint32_t dword = lapic_read(LAPIC_ID);
                                 dword &= ~(0xff<<24);
-                                dword |= (((initial_apicid + APIC_ID_OFFSET) & 0xff)<<24);
+                                dword |= (((initial_apicid + CONFIG_APIC_ID_OFFSET) & 0xff)<<24);
 
                                 lapic_write(LAPIC_ID, dword);
                 }
 
-                #if LIFT_BSP_APIC_ID == 1
-                bsp_apicid += APIC_ID_OFFSET;
+                #if CONFIG_LIFT_BSP_APIC_ID == 1
+                bsp_apicid += CONFIG_APIC_ID_OFFSET;
                 #endif
 
         #endif
@@ -346,7 +346,7 @@ static unsigned init_cpus(unsigned cpu_init_detectedx)
 			}
                         lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x44); // bsp can not check it before stop_this_cpu
                         set_init_ram_access();
-	#if MEM_TRAIN_SEQ == 1
+	#if CONFIG_MEM_TRAIN_SEQ == 1
 			train_ram_on_node(id.nodeid, id.coreid, sysinfo, STOP_CAR_AND_CPU);
 	#endif
 
diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c
index 3bccfe0d83..d183bf89bc 100644
--- a/src/cpu/amd/model_fxx/model_fxx_init.c
+++ b/src/cpu/amd/model_fxx/model_fxx_init.c
@@ -32,15 +32,15 @@
 
 void cpus_ready_for_init(void)
 {
-#if MEM_TRAIN_SEQ == 1
-        struct sys_info *sysinfox = (struct sys_info *)((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE);
+#if CONFIG_MEM_TRAIN_SEQ == 1
+        struct sys_info *sysinfox = (struct sys_info *)((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
         // wait for ap memory to trained
         wait_all_core0_mem_trained(sysinfox);
 #endif
 }
 
 
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 int is_e0_later_in_bsp(int nodeid)
 {
         uint32_t val;
@@ -67,7 +67,7 @@ int is_e0_later_in_bsp(int nodeid)
 }
 #endif
 
-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
 int is_cpu_f0_in_bsp(int nodeid)
 {
         uint32_t dword;
@@ -289,8 +289,8 @@ static void init_ecc_memory(unsigned node_id)
 	startk = (pci_read_config32(f1_dev, 0x40 + (node_id*8)) & 0xffff0000) >> 2;
 	endk   = ((pci_read_config32(f1_dev, 0x44 + (node_id*8)) & 0xffff0000) >> 2) + 0x4000;
 
-#if HW_MEM_HOLE_SIZEK != 0
-	#if K8_REV_F_SUPPORT == 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
+	#if CONFIG_K8_REV_F_SUPPORT == 0
         if (!is_cpu_pre_e0()) 
 	{
 	#endif
@@ -300,7 +300,7 @@ static void init_ecc_memory(unsigned node_id)
                 if(val & 1) {
         	        hole_startk = ((val & (0xff<<24)) >> 10);
                 }
-	#if K8_REV_F_SUPPORT == 0
+	#if CONFIG_K8_REV_F_SUPPORT == 0
         }
 	#endif
 #endif
@@ -322,7 +322,7 @@ static void init_ecc_memory(unsigned node_id)
 	disable_lapic();
 
 	/* Walk through 2M chunks and zero them */
-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 	/* here hole_startk can not be equal to begink, never. Also hole_startk is in 2M boundary, 64M? */
         if ( (hole_startk != 0) && ((begink < hole_startk) && (endk>(4*1024*1024)))) {
 		        for(basek = begink; basek < hole_startk;
@@ -368,7 +368,7 @@ static void init_ecc_memory(unsigned node_id)
 static inline void k8_errata(void)
 {
 	msr_t msr;
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 	if (is_cpu_pre_c0()) {
 		/* Erratum 63... */
 		msr = rdmsr(HWCR_MSR);
@@ -438,7 +438,7 @@ static inline void k8_errata(void)
  	}
 #endif
 
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 	if (!is_cpu_pre_e0()) 
 #endif
 	{
@@ -453,7 +453,7 @@ static inline void k8_errata(void)
 	msr.lo |= 1 << 6;
 	wrmsr(HWCR_MSR, msr);
 
-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
         /* Erratum 131... */
         msr = rdmsr(NB_CFG_MSR);
         msr.lo |= 1 << 20;
@@ -478,7 +478,7 @@ void model_fxx_init(device_t dev)
 	unsigned siblings;
 #endif
 
-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
 	struct cpuinfo_x86 c;
 	
 	get_fms(&c, dev->device);
@@ -564,7 +564,7 @@ static struct device_operations cpu_dev_ops = {
 };
 
 static struct cpu_device_id cpu_table[] = {
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 	{ X86_VENDOR_AMD, 0xf40 },   /* SH-B0 (socket 754) */
 	{ X86_VENDOR_AMD, 0xf50 },   /* SH-B0 (socket 940) */
 	{ X86_VENDOR_AMD, 0xf51 },   /* SH-B3 (socket 940) */
@@ -606,7 +606,7 @@ static struct cpu_device_id cpu_table[] = {
 	{ X86_VENDOR_AMD, 0x30ff2 }, /* E4 ? */
 #endif
 
-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
 	/*
 	 * AMD F0 support.
 	 *
diff --git a/src/cpu/amd/model_fxx/model_fxx_update_microcode.c b/src/cpu/amd/model_fxx/model_fxx_update_microcode.c
index e210846479..68a2cea070 100644
--- a/src/cpu/amd/model_fxx/model_fxx_update_microcode.c
+++ b/src/cpu/amd/model_fxx/model_fxx_update_microcode.c
@@ -52,13 +52,13 @@ $1.0$
 
 static uint8_t microcode_updates[] __attribute__ ((aligned(16))) = {
 
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 	#include "microcode_rev_c.h"
 	#include "microcode_rev_d.h"
 	#include "microcode_rev_e.h"
 #endif
 
-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
 //	#include "microcode_rev_f.h"
 #endif
         /*  Dummy terminator  */
@@ -70,7 +70,7 @@ static uint8_t microcode_updates[] __attribute__ ((aligned(16))) = {
 
 static unsigned get_equivalent_processor_rev_id(unsigned orig_id) {
 	static unsigned id_mapping_table[] = {
-	#if K8_REV_F_SUPPORT == 0
+	#if CONFIG_K8_REV_F_SUPPORT == 0
 	        0x0f48, 0x0048,
 	        0x0f58, 0x0048,
 
@@ -93,7 +93,7 @@ static unsigned get_equivalent_processor_rev_id(unsigned orig_id) {
 	        0x20fb1, 0x0210,
 	#endif
 
-	#if K8_REV_F_SUPPORT == 1
+	#if CONFIG_K8_REV_F_SUPPORT == 1
 	
 	#endif
 
diff --git a/src/cpu/amd/model_fxx/powernow_acpi.c b/src/cpu/amd/model_fxx/powernow_acpi.c
index 6ad1686dad..b68382761f 100644
--- a/src/cpu/amd/model_fxx/powernow_acpi.c
+++ b/src/cpu/amd/model_fxx/powernow_acpi.c
@@ -169,7 +169,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP)
 	cpuid1 = cpuid(0x80000001);
 	pwr_lmt = ((cpuid1.ebx & 0x1C0) >> 5) | ((cpuid1.ebx & 0x4000) >> 14);
 	for (index = 0; index <= sizeof(TDP) / sizeof(TDP[0]); index++)
-		if (TDP[index].socket_type == CPU_SOCKET_TYPE &&
+		if (TDP[index].socket_type == CONFIG_CPU_SOCKET_TYPE &&
 		    TDP[index].cmp_cap == cmp_cap &&
 		    TDP[index].pwr_lmt == pwr_lmt) {
 			power_limit = TDP[index].power_limit;
diff --git a/src/cpu/amd/model_fxx/processor_name.c b/src/cpu/amd/model_fxx/processor_name.c
index df187cb1d2..5c87266f23 100644
--- a/src/cpu/amd/model_fxx/processor_name.c
+++ b/src/cpu/amd/model_fxx/processor_name.c
@@ -41,7 +41,7 @@
  * your mainboard will not be posted on the AMD Recommended Motherboard Website
  */
 
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 static char *processor_names[]={
 	/* 0x00 */ "AMD Engineering Sample",
 	/* 0x01-0x03 */ NULL, NULL, NULL,
@@ -163,7 +163,7 @@ int init_processor_name(void)
 	char program_string[48];
 	unsigned int *program_values = (unsigned int *)program_string;
 
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 	/* Find out which CPU brand it is */
 	EightBitBrandId = cpuid_ebx(0x00000001) & 0xff;
 	BrandId = cpuid_ebx(0x80000001) & 0xffff;
@@ -187,7 +187,7 @@ int init_processor_name(void)
 		processor_name_string = "AMD Processor model unknown";
 #endif
 
-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
 	u32 Socket;
 	u32 CmpCap;
 	u32 PwrLmt;
@@ -343,7 +343,7 @@ int init_processor_name(void)
 	for (i=0; i<47; i++) { // 48 -1 
 		if(program_string[i] == program_string[i+1]) {
 			switch (program_string[i]) {
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 			case 'X': ModelNumber = 22+ NN; break;
 			case 'Y': ModelNumber = 38 + (2*NN); break;
 			case 'Z':
@@ -352,7 +352,7 @@ int init_processor_name(void)
 			case 'V': ModelNumber =  9 + NN; break;
 #endif
 
-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
 			case 'R': ModelNumber = NN - 1; break;
 			case 'P': ModelNumber = 26 + NN; break;
 			case 'T': ModelNumber = 15 + (CmpCap * 10) + NN; break;
diff --git a/src/cpu/amd/model_gx2/vsmsetup.c b/src/cpu/amd/model_gx2/vsmsetup.c
index dc1b680836..3c71cdb408 100644
--- a/src/cpu/amd/model_gx2/vsmsetup.c
+++ b/src/cpu/amd/model_gx2/vsmsetup.c
@@ -271,7 +271,7 @@ void do_vsmbios(void)
 	//rom = 0xfff80000;
 	//rom = 0xfffc0000;
 	/* the VSA starts at the base of rom - 64 */
-	rom = ((unsigned long) 0) - (ROM_SIZE  + 64*1024);
+	rom = ((unsigned long) 0) - (CONFIG_ROM_SIZE  + 64*1024);
 
 	buf = (unsigned char *) 0x60000;
 	olen = unrv2b((uint8_t *)rom, buf, &ilen);
diff --git a/src/cpu/amd/model_lx/cache_as_ram.inc b/src/cpu/amd/model_lx/cache_as_ram.inc
index 57bfc1211f..c9e538ad93 100644
--- a/src/cpu/amd/model_lx/cache_as_ram.inc
+++ b/src/cpu/amd/model_lx/cache_as_ram.inc
@@ -17,8 +17,8 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
-#define	LX_STACK_BASE		DCACHE_RAM_BASE		/* this is where the DCache will be mapped and be used as stack, It would be cool if it was the same base as coreboot normal stack */
-#define	LX_STACK_END		LX_STACK_BASE+(DCACHE_RAM_SIZE-1)
+#define	LX_STACK_BASE		CONFIG_DCACHE_RAM_BASE		/* this is where the DCache will be mapped and be used as stack, It would be cool if it was the same base as coreboot normal stack */
+#define	LX_STACK_END		LX_STACK_BASE+(CONFIG_DCACHE_RAM_SIZE-1)
 
 #define	LX_NUM_CACHELINES	0x080	/* there are 128lines per way */
 #define	LX_CACHELINE_SIZE	0x020	/* there are 32bytes per line */
@@ -82,7 +82,7 @@ DCacheSetup:
 	xorl	%esi, %esi
 	xorl	%ebp, %ebp
 
-	/* DCache Ways0 through Ways7 will be tagged for LX_STACK_BASE + DCACHE_RAM_SIZE for holding stack */
+	/* DCache Ways0 through Ways7 will be tagged for LX_STACK_BASE + CONFIG_DCACHE_RAM_SIZE for holding stack */
 	/* remember,  there is NO stack yet... */
 
 	/* Tell cache we want to fill WAY 0 starting at the top */
@@ -192,7 +192,7 @@ done_cache_as_ram_main:
 	mov	string, %ebx	; \
 	CALLSP(crt_console_tx_string)
 
-# if defined(TTYS0_BASE) && (ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG)
+# if defined(CONFIG_TTYS0_BASE) && (ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG)
 #  define CONSOLE_DEBUG_TX_STRING(string)        __CRT_CONSOLE_TX_STRING(string)
 # else
 #  define CONSOLE_DEBUG_TX_STRING(string)
@@ -333,26 +333,26 @@ crt_console_tx_string:
 	RETSP
 9:
 /* Base Address */
-#ifndef TTYS0_BASE
-#define TTYS0_BASE	0x3f8
+#ifndef CONFIG_TTYS0_BASE
+#define CONFIG_TTYS0_BASE	0x3f8
 #endif
 /* Data */
-#define TTYS0_RBR (TTYS0_BASE+0x00)
+#define TTYS0_RBR (CONFIG_TTYS0_BASE+0x00)
 
 /* Control */
 #define TTYS0_TBR TTYS0_RBR
-#define TTYS0_IER (TTYS0_BASE+0x01)
-#define TTYS0_IIR (TTYS0_BASE+0x02)
+#define TTYS0_IER (CONFIG_TTYS0_BASE+0x01)
+#define TTYS0_IIR (CONFIG_TTYS0_BASE+0x02)
 #define TTYS0_FCR TTYS0_IIR
-#define TTYS0_LCR (TTYS0_BASE+0x03)
-#define TTYS0_MCR (TTYS0_BASE+0x04)
+#define TTYS0_LCR (CONFIG_TTYS0_BASE+0x03)
+#define TTYS0_MCR (CONFIG_TTYS0_BASE+0x04)
 #define TTYS0_DLL TTYS0_RBR
 #define TTYS0_DLM TTYS0_IER
 
 /* Status */
-#define TTYS0_LSR (TTYS0_BASE+0x05)
-#define TTYS0_MSR (TTYS0_BASE+0x06)
-#define TTYS0_SCR (TTYS0_BASE+0x07)
+#define TTYS0_LSR (CONFIG_TTYS0_BASE+0x05)
+#define TTYS0_MSR (CONFIG_TTYS0_BASE+0x06)
+#define TTYS0_SCR (CONFIG_TTYS0_BASE+0x07)
 
 	mov	%al, %ah
 10:	mov	$TTYS0_LSR, %dx
diff --git a/src/cpu/amd/model_lx/syspreinit.c b/src/cpu/amd/model_lx/syspreinit.c
index 4df30f4b8a..53cd4aa9c9 100644
--- a/src/cpu/amd/model_lx/syspreinit.c
+++ b/src/cpu/amd/model_lx/syspreinit.c
@@ -39,7 +39,7 @@ void SystemPreInit(void)
 {
 
 	/* they want a jump ... */
-#ifndef USE_DCACHE_RAM
+#ifndef CONFIG_USE_DCACHE_RAM
 	__asm__ __volatile__("jmp .+2\ninvd\njmp .+2\n");
 #endif
 	StartTimer1();
diff --git a/src/cpu/amd/model_lx/vsmsetup.c b/src/cpu/amd/model_lx/vsmsetup.c
index 9c47a4f6d9..0a749da90a 100644
--- a/src/cpu/amd/model_lx/vsmsetup.c
+++ b/src/cpu/amd/model_lx/vsmsetup.c
@@ -292,7 +292,7 @@ void do_vsmbios(void)
 	 */
 
 	//VSA is cat onto the end after LB builds
-	rom = ((unsigned long)0) - (ROM_SIZE + 36 * 1024);
+	rom = ((unsigned long)0) - (CONFIG_ROM_SIZE + 36 * 1024);
 	buf = (unsigned char *)VSA2_BUFFER;
 	olen = unrv2b((uint8_t *) rom, buf, &ilen);
 	printk_debug("buf ilen %d olen%d\n", ilen, olen);
diff --git a/src/cpu/amd/mtrr/amd_earlymtrr.c b/src/cpu/amd/mtrr/amd_earlymtrr.c
index 948d4ac83b..c633c957f0 100644
--- a/src/cpu/amd/mtrr/amd_earlymtrr.c
+++ b/src/cpu/amd/mtrr/amd_earlymtrr.c
@@ -41,11 +41,11 @@ static void do_amd_early_mtrr_init(const unsigned long *mtrr_msrs)
         msr.lo = (((CONFIG_LB_MEM_TOPK << 10) + TOP_MEM_MASK) & ~TOP_MEM_MASK);
         wrmsr(TOP_MEM, msr);
 
-#if defined(XIP_ROM_SIZE)
+#if defined(CONFIG_XIP_ROM_SIZE)
         /* enable write through caching so we can do execute in place
          * on the flash rom.
          */
-        set_var_mtrr(1, XIP_ROM_BASE, XIP_ROM_SIZE, MTRR_TYPE_WRBACK);
+        set_var_mtrr(1, CONFIG_XIP_ROM_BASE, CONFIG_XIP_ROM_SIZE, MTRR_TYPE_WRBACK);
 #endif
 
         /* Set the default memory type and enable fixed and variable MTRRs 
diff --git a/src/cpu/amd/mtrr/amd_mtrr.c b/src/cpu/amd/mtrr/amd_mtrr.c
index e8e9273868..3d72fe684e 100644
--- a/src/cpu/amd/mtrr/amd_mtrr.c
+++ b/src/cpu/amd/mtrr/amd_mtrr.c
@@ -180,7 +180,7 @@ void amd_setup_mtrrs(void)
 	/* FIXME we should probably query the cpu for this
 	 * but so far this is all any recent AMD cpu has supported.
 	 */
-	address_bits = CPU_ADDR_BITS; //K8 could be 40, and GH could be 48
+	address_bits = CONFIG_CPU_ADDR_BITS; //K8 could be 40, and GH could be 48
 
 	/* Now that I have mapped what is memory and what is not
 	 * Setup the mtrrs so we can cache the memory.
diff --git a/src/cpu/amd/quadcore/amd_sibling.c b/src/cpu/amd/quadcore/amd_sibling.c
index 4d4e11648f..999c51807c 100644
--- a/src/cpu/amd/quadcore/amd_sibling.c
+++ b/src/cpu/amd/quadcore/amd_sibling.c
@@ -114,7 +114,7 @@ u32 get_apicid_base(u32 ioapic_num)
 
 	if((apicid_base+ioapic_num-1)>0xf) {
 		// We need to enable APIC EXT ID
-		printk_spew("if the IO APIC device doesn't support 256 apic id, \r\n you need to set ENABLE_APIC_EXT_ID in MB Option.lb so you can spare 16 id for ioapic\r\n");
+		printk_spew("if the IO APIC device doesn't support 256 apic id, \r\n you need to set CONFIG_ENABLE_APIC_EXT_ID in MB Option.lb so you can spare 16 id for ioapic\r\n");
 		enable_apic_ext_id(sysconf.nodes);
 	}
 
diff --git a/src/cpu/amd/socket_AM2/Config.lb b/src/cpu/amd/socket_AM2/Config.lb
index de3c04608f..095643bd91 100644
--- a/src/cpu/amd/socket_AM2/Config.lb
+++ b/src/cpu/amd/socket_AM2/Config.lb
@@ -1,15 +1,15 @@
-uses K8_REV_F_SUPPORT
-uses K8_HT_FREQ_1G_SUPPORT
-uses DIMM_SUPPORT
-uses CPU_SOCKET_TYPE
+uses CONFIG_K8_REV_F_SUPPORT
+uses CONFIG_K8_HT_FREQ_1G_SUPPORT
+uses CONFIG_DIMM_SUPPORT
+uses CONFIG_CPU_SOCKET_TYPE
 
 config chip.h
 
-default K8_REV_F_SUPPORT=1
+default CONFIG_K8_REV_F_SUPPORT=1
 #Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
-default DIMM_SUPPORT=0x0004  #DDR2 unbuffered
-default CPU_SOCKET_TYPE=0x11
+default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
+default CONFIG_DIMM_SUPPORT=0x0004  #DDR2 unbuffered
+default CONFIG_CPU_SOCKET_TYPE=0x11
 
 object socket_AM2.o
 
diff --git a/src/cpu/amd/socket_F/Config.lb b/src/cpu/amd/socket_F/Config.lb
index 42afda14b8..72f2a1b4cb 100644
--- a/src/cpu/amd/socket_F/Config.lb
+++ b/src/cpu/amd/socket_F/Config.lb
@@ -1,15 +1,15 @@
-uses K8_REV_F_SUPPORT
-uses K8_HT_FREQ_1G_SUPPORT
-uses DIMM_SUPPORT
-uses CPU_SOCKET_TYPE
+uses CONFIG_K8_REV_F_SUPPORT
+uses CONFIG_K8_HT_FREQ_1G_SUPPORT
+uses CONFIG_DIMM_SUPPORT
+uses CONFIG_CPU_SOCKET_TYPE
 
 config chip.h
 
-default K8_REV_F_SUPPORT=1
+default CONFIG_K8_REV_F_SUPPORT=1
 #Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
-default DIMM_SUPPORT=0x0104  #DDR2 and REG
-default CPU_SOCKET_TYPE=0x10
+default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
+default CONFIG_DIMM_SUPPORT=0x0104  #DDR2 and REG
+default CONFIG_CPU_SOCKET_TYPE=0x10
 
 object socket_F.o
 
diff --git a/src/cpu/amd/socket_F_1207/Config.lb b/src/cpu/amd/socket_F_1207/Config.lb
index 5777e356d4..5c0147af7e 100644
--- a/src/cpu/amd/socket_F_1207/Config.lb
+++ b/src/cpu/amd/socket_F_1207/Config.lb
@@ -17,37 +17,37 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 #
 
-uses PCI_IO_CFG_EXT
-uses MMCONF_SUPPORT
-uses HT3_SUPPORT
-uses EXT_RT_TBL_SUPPORT
-uses EXT_CONF_SUPPORT
-uses DIMM_SUPPORT
-uses CPU_SOCKET_TYPE
-uses CBB
-uses CDB
-uses PCI_BUS_SEGN_BITS
-uses CAR_FAM10
+uses CONFIG_PCI_IO_CFG_EXT
+uses CONFIG_MMCONF_SUPPORT
+uses CONFIG_HT3_SUPPORT
+uses CONFIG_EXT_RT_TBL_SUPPORT
+uses CONFIG_EXT_CONF_SUPPORT
+uses CONFIG_DIMM_SUPPORT
+uses CONFIG_CPU_SOCKET_TYPE
+uses CONFIG_CBB
+uses CONFIG_CDB
+uses CONFIG_PCI_BUS_SEGN_BITS
+uses CONFIG_CAR_FAM10
 
 config chip.h
 
-default PCI_IO_CFG_EXT=1
+default CONFIG_PCI_IO_CFG_EXT=1
 
-default HT3_SUPPORT=1
-default EXT_RT_TBL_SUPPORT=0
-default EXT_CONF_SUPPORT=0
-default DIMM_SUPPORT=0x0104  #DDR2 and REG
-default CPU_SOCKET_TYPE=0x10
+default CONFIG_HT3_SUPPORT=1
+default CONFIG_EXT_RT_TBL_SUPPORT=0
+default CONFIG_EXT_CONF_SUPPORT=0
+default CONFIG_DIMM_SUPPORT=0x0104  #DDR2 and REG
+default CONFIG_CPU_SOCKET_TYPE=0x10
 
-default CAR_FAM10=1
+default CONFIG_CAR_FAM10=1
 
-if EXT_RT_TBL_SUPPORT
-	default CBB=0xff
-	default CDB=0
+if CONFIG_EXT_RT_TBL_SUPPORT
+	default CONFIG_CBB=0xff
+	default CONFIG_CDB=0
 end
 
-#default MMCONF_SUPPORT=1
-#default MMCONF_SUPPORT_DEFAULT=1
+#default CONFIG_MMCONF_SUPPORT=1
+#default CONFIG_MMCONF_SUPPORT_DEFAULT=1
 
 object socket_F_1207.o
 
diff --git a/src/cpu/amd/socket_S1G1/Config.lb b/src/cpu/amd/socket_S1G1/Config.lb
index 5cdc3bffab..6aa6b5a45b 100644
--- a/src/cpu/amd/socket_S1G1/Config.lb
+++ b/src/cpu/amd/socket_S1G1/Config.lb
@@ -1,15 +1,15 @@
-uses K8_REV_F_SUPPORT
-uses K8_HT_FREQ_1G_SUPPORT
-uses DIMM_SUPPORT
-uses CPU_SOCKET_TYPE
+uses CONFIG_K8_REV_F_SUPPORT
+uses CONFIG_K8_HT_FREQ_1G_SUPPORT
+uses CONFIG_DIMM_SUPPORT
+uses CONFIG_CPU_SOCKET_TYPE
 
 config chip.h
 
-default K8_REV_F_SUPPORT=1
+default CONFIG_K8_REV_F_SUPPORT=1
 #Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
-default DIMM_SUPPORT=0x0204  #DDR2 and REG, S1G1
-default CPU_SOCKET_TYPE=0x12
+default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
+default CONFIG_DIMM_SUPPORT=0x0204  #DDR2 and REG, S1G1
+default CONFIG_CPU_SOCKET_TYPE=0x12
 
 object socket_S1G1.o