If no pci access method has been set for the device tree so far (e.g.

during early coreboot_ram), pci_{read,write}_config{8,16,32} will die().
This patch changes pci_{read,write}_config{8,16,32} to use the existing
PCI access method autodetection infrastructure instead of die()ing.

Until r4340, any usage of pci_{read,write}_config{8,16,32} in
coreboot_ram before the device tree was set up resulted in either a
silent hang or a NULL pointer dereference. I changed the code in r4340
to die() properly with a loud error message. That still was not perfect,
but at least it allowed people to see why their new ports died.
Still, die() is not something developers like to see, and thus a patch
to automatically pick a sensible default instead of dying was created.
Of course, handling PCI access method selection automatically for
fallback purposes has certain limitations before the device tree is set
up. We only check if conf1 works and use conf2 as fallback. No further
tests are done.

This patch enables cleanups and readability improvements in early
coreboot_ram code:
Without this patch:
dword = pci_cf8_conf1.read32(&pbus, sm_dev->bus->secondary,
        sm_dev->path.pci.devfn, 0x64);
With this patch:
dword = pci_read_config32(sm_dev, 0x64);

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4646 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 10 insertions, 1 deletions

diff --git a/src/arch/i386/lib/pci_ops_auto.c b/src/arch/i386/lib/pci_ops_auto.c
index b757e608fc..f453d47826 100644
--- a/src/arch/i386/lib/pci_ops_auto.c
+++ b/src/arch/i386/lib/pci_ops_auto.c
@@ -41,6 +41,8 @@ static int pci_sanity_check(const struct pci_bus_operations *o)
 	return 0;
 }
 
+struct pci_bus_operations *pci_bus_fallback_ops = NULL;
+
 const struct pci_bus_operations *pci_check_direct(void)
 {
 	unsigned int tmp;
@@ -81,11 +83,18 @@ const struct pci_bus_operations *pci_check_direct(void)
 	return NULL;
 }
 
+const struct pci_bus_operations *pci_remember_direct(void)
+{
+	if (!pci_bus_fallback_ops)
+		pci_bus_fallback_ops = pci_check_direct();
+	return pci_bus_fallback_ops;
+}
+
 /** Set the method to be used for PCI, type I or type II
  */
 void pci_set_method(device_t dev)
 {
 	printk_info("Finding PCI configuration type.\n");
-	dev->ops->ops_pci_bus = pci_check_direct();
+	dev->ops->ops_pci_bus = pci_remember_direct();
 	post_code(0x5f);
 }