mb/google/brox: Set PCH_EC_PCH_INT_ODL pin as IOAPIC

Setting the EC interrupt GPIO as an APIC is able to solve many
problems that we are currently seeing:

1.  Routing through the APIC make the IRQ# associated with this pin
unavailable to claim for other devices in the kernel.  This is causing
EC interrupts to not work.
2.  Since EC interrupt are not working, we are not able to flash the
EC from the DUT.
3.  Also, the GPI_INT configuration does not allow us to set the
polarity of the GPIO, which means that it is by default set as active
high.  As a result, we are seeing an excessive number of host command
interrupts to the EC.  This disappears when we change the
configuration to APIC and set the polarity as INVERT.

BUG=b:319129926,b:324707182
BRANCH=None

TEST=1. After boot up, check if ec_cros_lpcs driver was successfully
     registered.  Look for the following string:
     "cros_ec_lpcs GOOG0004:00: Chrome EC device registered"
     2.  Make sure can flash the EC image from the DUT
     3.  Make sure EC console is not getting continuous stream of host
     commands.

Change-Id: I74bff88d2ddbaf1f4b085c31d582bd66e18c438a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80467
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.corp-partner.google.com>

0 files changed, 0 insertions, 0 deletions