nb/intel/sandybridge/raminit: Add ECC debug code

* Add ECC test code when DEBUG_RAM_SETUP is enabled
* Move ECC scrubbing after set_scrambling_seed() to be able to observe
  what has been cleared in the test routine. If clearing happens
  before set_scrambling_seed the data is XORed with a different PRN.
  Data read from memory will look random instead of all zeros.
* ECC scrubbing must happen after dram_dimm_set_mapping()
  The ECC logic is set to "normal mode" in dram_dimm_set_mapping(). In
  normal mode the ECC bits are calculated and stored on write
  transactions.
* Move method out of try_init_dram_ddr3().
  This satisfies point 2 and point 3 of the list above.

Change-Id: I76174ec962c9b0bb72852897586eb95d896d301e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

0 files changed, 0 insertions, 0 deletions