mb/intel/dq67sw: Add LGA1155 microATX mainboard

This is a new port for the Intel DQ67SW desktop board. It is
microATX-sized with an LGA1155 socket and four DIMM sockets for DDR3
SDRAM.

A list of tested working and non-working features is in the
documentation page.

Change-Id: Ifc703f2d0ad45495e71d3f7799347430f5196791
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

1 files changed, 170 insertions, 0 deletions

diff --git a/Documentation/mainboard/intel/dq67sw.md b/Documentation/mainboard/intel/dq67sw.md
new file mode 100644
index 0000000000..b3ed9b8d0d
--- /dev/null
+++ b/Documentation/mainboard/intel/dq67sw.md
@@ -0,0 +1,170 @@
+# Intel DQ67SW
+
+The Intel DQ67SW is a microATX-sized desktop board for Intel Sandy Bridge CPUs.
+
+## Technology
+
+```eval_rst
++------------------+--------------------------------------------------+
+| Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
++------------------+--------------------------------------------------+
+| Southbridge      | Intel Q67 (bd82x6x)                              |
++------------------+--------------------------------------------------+
+| CPU socket       | LGA 1155                                         |
++------------------+--------------------------------------------------+
+| RAM              | 4 x DDR3-1333                                    |
++------------------+--------------------------------------------------+
+| Super I/O        | Nuvoton/Winbond W83677HG-i                       |
++------------------+--------------------------------------------------+
+| Audio            | Realtek ALC888S                                  |
++------------------+--------------------------------------------------+
+| Network          | Intel 82579LM Gigabit Ethernet                   |
++------------------+--------------------------------------------------+
+| Serial           | Internal header                                  |
++------------------+--------------------------------------------------+
+```
+
+## Status
+
+### Working
+
+- Sandy Bridge and Ivy Bridge CPUs (tested: i5-2500, Pentium G2120)
+- Native RAM initialization with four DIMMs
+- Integrated GPU with libgfxinit
+- PCIe graphics in the PEG slot
+- Additional PCIe slots
+- PCI slot
+- All rear (4x) and internal (8x) USB2 ports
+- Rear USB3 ports (2x)
+- All four internal SATA ports (two 6 Gb/s, two 3 Gb/s)
+- Two rear eSATA connectors (3 Gb/s)
+- SATA at 6 Gb/s
+- Gigabit Ethernet
+- SeaBIOS 1.16.1 + libgfxinit (legacy VGA) to boot slackware64 (Linux 5.15)
+- SeaBIOS 1.16.1 + extracted VGA BIOS to boot Windows 10 (21H2)
+- edk2 UefiPayload (uefipayload_202207) + libgfxinit (high-res) to boot:
+    - slackware64 (Linux 5.15)
+    - Windows 10 (22H2)
+- External in-circuit flashing with flashrom-1.2 and a Raspberry Pi 1
+- Poweroff
+- Resume from S3
+- Console output on the serial port
+
+### Not working
+
+- Automatic fan control. One can still use OS-based fan control programs,
+  such as fancontrol on Linux or SpeedFan on Windows.
+- Windows 10 booted from SeaBIOS + libgfxinit (high-res). The installation
+  works, but once Windows Update installs drivers, it crashes and enters a
+  bootloop.
+
+### Untested
+
+- Firewire (LSI L-FW3227-100)
+- EHCI debug
+- S/PDIF audio
+- Audio jacks other than the green one
+
+## Flashing coreboot
+
+```eval_rst
++---------------------+------------+
+| Type                | Value      |
++=====================+============+
+| Socketed flash      | no         |
++---------------------+------------+
+| Model               | W25Q64.V   |
++---------------------+------------+
+| Size                | 8 MiB      |
++---------------------+------------+
+| Package             | SOIC-8     |
++---------------------+------------+
+| Write protection    | yes        |
++---------------------+------------+
+| Dual BIOS feature   | no         |
++---------------------+------------+
+| Internal flashing   | see below  |
++---------------------+------------+
+| In circuit flashing | see below  |
++---------------------+------------+
+```
+
+The flash is divided into the following regions, as obtained with
+`ifdtool -f rom.layout backup.rom`:
+
+    00000000:00000fff fd
+    00580000:007fffff bios
+    00003000:0057ffff me
+    00001000:00002fff gbe
+
+Unfortunately the SPI interface to the chip is locked down by the vendor
+firmware. The BIOS Lock Enable (BLE) bit of the `BIOS_CNTL` register, part of
+the PCI configuration space of the LPC Interface Bridge, is set.
+
+It is possible to program the chip is to attach an external programmer
+with an SOIC-8 clip.
+
+```eval_rst
+Another way is to boot the vendor firmware in UEFI mode and exploit the
+unpatched S3 Boot Script vulnerability. See this page for a similar procedure:
+:doc:`../lenovo/ivb_internal_flashing`.
+```
+
+On this specific board it is possible to prevent the BLE bit from being set
+when it resumes from S3. One entry in the S3 Boot Script must be modified,
+e.g. with a patched version of [CHIPSEC](https://github.com/chipsec/chipsec)
+that supports this specific type of S3 Boot Script, for example from strobo5:
+
+    $ git clone -b headerless https://github.com/strobo5/chipsec.git
+    $ cd chipsec
+    $ python setup.py build_ext -i
+    $ sudo python chipsec_main.py -m tools.uefi.s3script_modify -a replace_op,mmio_wr,0xe00f80dc,0x00,1
+
+The boot script contains an entry that writes 0x02 to memory at address
+0xe00f80dc. This address points at the PCIe configuration register at offset
+0xdc for the PCIe device 0:1f.0, which is the BIOS Control Register of the LPC
+Interface Bridge [0][1]. The value 0x02 sets the BLE bit, and the modification
+prevents this by making it write a 0 instead.
+
+```eval_rst
+After suspending and resuming the board, the BIOS region can be flashed with
+a coreboot image, e.g. using flashrom. Note that the ME region is not readable,
+so the `--noverify-all` flag is necessary. Please refer to the
+:doc:`../../tutorial/flashing_firmware/index`.
+```
+
+## Hardware monitoring and fan control
+
+Currently there is no automatic, OS-independent fan control.
+
+## Serial port header
+
+Serial port 1, provided by the Super I/O, is exposed on a pin header. The
+RS-232 signals are assigned to the header so that its pin numbers map directly
+to the pin numbers of a DE-9 connector. If your serial port doesn't seem to
+work, check if your bracket expects a different assignment.
+
+Here is a top view of the serial port header found on this board:
+
+                 +---+---+
+             N/C |   | 9 | RI  -> pin 9
+                 +---+---+
+    Pin 8 <- CTS | 8 | 7 | RTS -> pin 7
+                 +---+---+
+    Pin 6 <- DSR | 6 | 5 | GND -> pin 5
+                 +---+---+
+    Pin 4 <- DTR | 4 | 3 | TxD -> pin 3
+                 +---+---+
+    Pin 2 <- RxD | 2 | 1 | DCD -> pin 1
+                 +---+---+
+
+## References
+
+[0]: Intel 6 Series Chipset and Intel C200 Series Chipset Datasheet,
+May 2011,
+Document number 324645-006
+
+[1]: Accessing PCI Express Configuration Registers Using Intel Chipsets,
+December 2008,
+Document number 321090
+