exynos/snow: Move core/memory clock-related and board ID code

This patch moves ARM core and DRAM timing functions around to simplify
the dependencies for system_clock_init().

The original code was architected such that the system_clock_init()
function called other functions to obtain core and memory timings.
Due to the way memory timing information must be obtained on Snow,
which entails decoding platform-specific board straps, the bottom-
up approach resulted in having the low-level clock init code
implicitly depend on board and vendor-specific info:

main()
  ->system_clock_init()
    -> get_arm_ratios()
       -> CPU-specific code
    -> clock_get_mem_timings()
       -> board_get_revision()
          -> read GPIOs (3-state logic)
          -> Decode GPIOs in a vendor-specific manner
       -> Choose memory timings from module-specific look-up table
  ...then proceed to init clocks
...come back to main()

The new approach gathers all board and vendor-specific info in a
more appropriate location and passes it into system_clock_init():
main()
  -> get_arm_ratios()
     -> CPU-specific code
  -> get_mem_timings()
     -> board_get_config()
        -> read GPIOs (3-state logic)
        -> Decode GPIOs in a vendor-specific manner
     -> Choose memory timings from module-specific look-up table
  -> system_clock_init()
...back to main()

Change-Id: Ie237ebff76fc2d8a4d2f4577a226ac3909e4d4e8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2271
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

11 files changed, 827 insertions, 1256 deletions

diff --git a/src/cpu/samsung/exynos5250/clock.c b/src/cpu/samsung/exynos5250/clock.c
index 0250d77a28..fc01387125 100644
--- a/src/cpu/samsung/exynos5250/clock.c
+++ b/src/cpu/samsung/exynos5250/clock.c
@@ -26,17 +26,107 @@
 #include <stdlib.h>
 //#include <fdtdec.h>
 #include <arch/io.h>
-//#include <asm/arch/clock.h>
-//#include <asm/arch/clk.h>
-#include <cpu/samsung/exynos5-common/clk.h>
 #include <cpu/samsung/exynos5250/clk.h>
+#include <cpu/samsung/exynos5250/clock_init.h>
 #include <cpu/samsung/exynos5250/cpu.h>
-#include <cpu/samsung/exynos5250/periph.h>
 #include <cpu/samsung/s5p-common/clk.h>
 
 /* input clock of PLL: SMDK5250 has 24MHz input clock */
 #define CONFIG_SYS_CLK_FREQ            24000000
 
+struct arm_clk_ratios arm_clk_ratios[] = {
+	{
+		.arm_freq_mhz = 600,
+
+		.apll_mdiv = 0xc8,
+		.apll_pdiv = 0x4,
+		.apll_sdiv = 0x1,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x1,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x2,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x1,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 800,
+
+		.apll_mdiv = 0x64,
+		.apll_pdiv = 0x3,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x1,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x3,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x2,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 1000,
+
+		.apll_mdiv = 0x7d,
+		.apll_pdiv = 0x3,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x1,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x4,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x2,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 1200,
+
+		.apll_mdiv = 0x96,
+		.apll_pdiv = 0x3,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x3,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x5,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x3,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 1400,
+
+		.apll_mdiv = 0xaf,
+		.apll_pdiv = 0x3,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x3,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x6,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x3,
+		.arm_ratio = 0x0,
+	}, {
+		.arm_freq_mhz = 1700,
+
+		.apll_mdiv = 0x1a9,
+		.apll_pdiv = 0x6,
+		.apll_sdiv = 0x0,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x3,
+		.pclk_dbg_ratio = 0x1,
+		.atb_ratio = 0x6,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x7,
+		.cpud_ratio = 0x3,
+		.arm_ratio = 0x0,
+	}
+};
 
 /* src_bit div_bit prediv_bit */
 static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = {
@@ -269,6 +359,21 @@ unsigned long get_arm_clk(void)
 	return armclk;
 }
 
+struct arm_clk_ratios *get_arm_clk_ratios(void)
+{
+	struct arm_clk_ratios *arm_ratio;
+	unsigned long arm_freq = 1700;	/* FIXME: use get_arm_clk() */
+	int i;
+
+	for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
+		i++, arm_ratio++) {
+		if (arm_ratio->arm_freq_mhz == arm_freq)
+			return arm_ratio;
+	}
+
+	return NULL;
+}
+
 /* exynos5: set the mmc clock */
 void set_mmc_clk(int dev_index, unsigned int div)
 {
diff --git a/src/cpu/samsung/exynos5250/clock_init.c b/src/cpu/samsung/exynos5250/clock_init.c
index 53bab1a53a..4f21022fd1 100644
--- a/src/cpu/samsung/exynos5250/clock_init.c
+++ b/src/cpu/samsung/exynos5250/clock_init.c
@@ -29,772 +29,27 @@
 
 #include <console/console.h>
 
-#include <cpu/samsung/exynos5-common/spl.h>
+/* FIXME: remove unneeded #includes */
 #include <cpu/samsung/exynos5250/clk.h>
+#include <cpu/samsung/exynos5250/clock_init.h>
 #include <cpu/samsung/exynos5250/cpu.h>
 #include <cpu/samsung/exynos5250/dmc.h>
 #include <cpu/samsung/exynos5250/s5p-dp.h>
 #include <cpu/samsung/s5p-common/clk.h>
 
-#include "clock_init.h"
 #include "setup.h"
 
-struct arm_clk_ratios arm_clk_ratios[] = {
-	{
-		.arm_freq_mhz = 600,
-
-		.apll_mdiv = 0xc8,
-		.apll_pdiv = 0x4,
-		.apll_sdiv = 0x1,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x1,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x2,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x1,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 800,
-
-		.apll_mdiv = 0x64,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x1,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x3,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x2,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1000,
-
-		.apll_mdiv = 0x7d,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x1,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x4,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x2,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1200,
-
-		.apll_mdiv = 0x96,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x5,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1400,
-
-		.apll_mdiv = 0xaf,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x6,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1700,
-
-		.apll_mdiv = 0x1a9,
-		.apll_pdiv = 0x6,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x6,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}
-};
-
-struct mem_timings mem_timings[] = {
-	{
-		.mem_manuf = MEM_MANUF_ELPIDA,
-		.mem_type = DDR_MODE_DDR3,
-		.frequency_mhz = 800,
-		.mpll_mdiv = 0x64,
-		.mpll_pdiv = 0x3,
-		.mpll_sdiv = 0x0,
-		.cpll_mdiv = 0xde,
-		.cpll_pdiv = 0x4,
-		.cpll_sdiv = 0x2,
-		.gpll_mdiv = 0x215,
-		.gpll_pdiv = 0xc,
-		.gpll_sdiv = 0x1,
-		.epll_mdiv = 0x60,
-		.epll_pdiv = 0x3,
-		.epll_sdiv = 0x3,
-		.vpll_mdiv = 0x96,
-		.vpll_pdiv = 0x3,
-		.vpll_sdiv = 0x2,
-
-		.bpll_mdiv = 0x64,
-		.bpll_pdiv = 0x3,
-		.bpll_sdiv = 0x0,
-		.use_bpll = 0,
-		.pclk_cdrex_ratio = 0x5,
-		.direct_cmd_msr = {
-			0x00020018, 0x00030000, 0x00010042, 0x00000d70
-		},
-		.timing_ref = 0x000000bb,
-		.timing_row = 0x8c36660f,
-		.timing_data = 0x3630580b,
-		.timing_power = 0x41000a44,
-		.phy0_dqs = 0x08080808,
-		.phy1_dqs = 0x08080808,
-		.phy0_dq = 0x08080808,
-		.phy1_dq = 0x08080808,
-		.phy0_tFS = 0x4,
-		.phy1_tFS = 0x4,
-		.phy0_pulld_dqs = 0xf,
-		.phy1_pulld_dqs = 0xf,
-
-		.lpddr3_ctrl_phy_reset = 0x1,
-		.ctrl_start_point = 0x10,
-		.ctrl_inc = 0x10,
-		.ctrl_start = 0x1,
-		.ctrl_dll_on = 0x1,
-		.ctrl_ref = 0x8,
-
-		.ctrl_force = 0x1a,
-		.ctrl_rdlat = 0x0b,
-		.ctrl_bstlen = 0x08,
-
-		.fp_resync = 0x8,
-		.iv_size = 0x7,
-		.dfi_init_start = 1,
-		.aref_en = 1,
-
-		.rd_fetch = 0x3,
-
-		.zq_mode_dds = 0x7,
-		.zq_mode_term = 0x1,
-		.zq_mode_noterm = 0,
-
-		/*
-		* Dynamic Clock: Always Running
-		* Memory Burst length: 8
-		* Number of chips: 1
-		* Memory Bus width: 32 bit
-		* Memory Type: DDR3
-		* Additional Latancy for PLL: 0 Cycle
-		*/
-		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
-			DMC_MEMCONTROL_TP_DISABLE |
-			DMC_MEMCONTROL_DSREF_ENABLE |
-			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
-			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
-			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
-			DMC_MEMCONTROL_NUM_CHIP_1 |
-			DMC_MEMCONTROL_BL_8 |
-			DMC_MEMCONTROL_PZQ_DISABLE |
-			DMC_MEMCONTROL_MRR_BYTE_7_0,
-		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
-			DMC_MEMCONFIGx_CHIP_COL_10 |
-			DMC_MEMCONFIGx_CHIP_ROW_15 |
-			DMC_MEMCONFIGx_CHIP_BANK_8,
-		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
-		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
-		.prechconfig_tp_cnt = 0xff,
-		.dpwrdn_cyc = 0xff,
-		.dsref_cyc = 0xffff,
-		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
-			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
-			DMC_CONCONTROL_RD_FETCH_DISABLE |
-			DMC_CONCONTROL_EMPTY_DISABLE |
-			DMC_CONCONTROL_AREF_EN_DISABLE |
-			DMC_CONCONTROL_IO_PD_CON_DISABLE,
-		.dmc_channels = 2,
-		.chips_per_channel = 2,
-		.chips_to_configure = 1,
-		.send_zq_init = 1,
-		.impedance = IMP_OUTPUT_DRV_30_OHM,
-		.gate_leveling_enable = 0,
-	}, {
-		.mem_manuf = MEM_MANUF_SAMSUNG,
-		.mem_type = DDR_MODE_DDR3,
-		.frequency_mhz = 800,
-		.mpll_mdiv = 0x64,
-		.mpll_pdiv = 0x3,
-		.mpll_sdiv = 0x0,
-		.cpll_mdiv = 0xde,
-		.cpll_pdiv = 0x4,
-		.cpll_sdiv = 0x2,
-		.gpll_mdiv = 0x215,
-		.gpll_pdiv = 0xc,
-		.gpll_sdiv = 0x1,
-		.epll_mdiv = 0x60,
-		.epll_pdiv = 0x3,
-		.epll_sdiv = 0x3,
-		.vpll_mdiv = 0x96,
-		.vpll_pdiv = 0x3,
-		.vpll_sdiv = 0x2,
-
-		.bpll_mdiv = 0x64,
-		.bpll_pdiv = 0x3,
-		.bpll_sdiv = 0x0,
-		.use_bpll = 0,
-		.pclk_cdrex_ratio = 0x5,
-		.direct_cmd_msr = {
-			0x00020018, 0x00030000, 0x00010000, 0x00000d70
-		},
-		.timing_ref = 0x000000bb,
-		.timing_row = 0x8c36660f,
-		.timing_data = 0x3630580b,
-		.timing_power = 0x41000a44,
-		.phy0_dqs = 0x08080808,
-		.phy1_dqs = 0x08080808,
-		.phy0_dq = 0x08080808,
-		.phy1_dq = 0x08080808,
-		.phy0_tFS = 0x8,
-		.phy1_tFS = 0x8,
-		.phy0_pulld_dqs = 0xf,
-		.phy1_pulld_dqs = 0xf,
-
-		.lpddr3_ctrl_phy_reset = 0x1,
-		.ctrl_start_point = 0x10,
-		.ctrl_inc = 0x10,
-		.ctrl_start = 0x1,
-		.ctrl_dll_on = 0x1,
-		.ctrl_ref = 0x8,
-
-		.ctrl_force = 0x1a,
-		.ctrl_rdlat = 0x0b,
-		.ctrl_bstlen = 0x08,
-
-		.fp_resync = 0x8,
-		.iv_size = 0x7,
-		.dfi_init_start = 1,
-		.aref_en = 1,
-
-		.rd_fetch = 0x3,
-
-		.zq_mode_dds = 0x5,
-		.zq_mode_term = 0x1,
-		.zq_mode_noterm = 1,
-
-		/*
-		* Dynamic Clock: Always Running
-		* Memory Burst length: 8
-		* Number of chips: 1
-		* Memory Bus width: 32 bit
-		* Memory Type: DDR3
-		* Additional Latancy for PLL: 0 Cycle
-		*/
-		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
-			DMC_MEMCONTROL_TP_DISABLE |
-			DMC_MEMCONTROL_DSREF_ENABLE |
-			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
-			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
-			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
-			DMC_MEMCONTROL_NUM_CHIP_1 |
-			DMC_MEMCONTROL_BL_8 |
-			DMC_MEMCONTROL_PZQ_DISABLE |
-			DMC_MEMCONTROL_MRR_BYTE_7_0,
-		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
-			DMC_MEMCONFIGx_CHIP_COL_10 |
-			DMC_MEMCONFIGx_CHIP_ROW_15 |
-			DMC_MEMCONFIGx_CHIP_BANK_8,
-		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
-		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
-		.prechconfig_tp_cnt = 0xff,
-		.dpwrdn_cyc = 0xff,
-		.dsref_cyc = 0xffff,
-		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
-			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
-			DMC_CONCONTROL_RD_FETCH_DISABLE |
-			DMC_CONCONTROL_EMPTY_DISABLE |
-			DMC_CONCONTROL_AREF_EN_DISABLE |
-			DMC_CONCONTROL_IO_PD_CON_DISABLE,
-		.dmc_channels = 2,
-		.chips_per_channel = 2,
-		.chips_to_configure = 1,
-		.send_zq_init = 1,
-		.impedance = IMP_OUTPUT_DRV_40_OHM,
-		.gate_leveling_enable = 1,
-	},
-	{
-		.mem_manuf = MEM_MANUF_ELPIDA,
-		.mem_type = DDR_MODE_DDR3,
-		.frequency_mhz = 780,
-		.mpll_mdiv = 0x64,
-		.mpll_pdiv = 0x3,
-		.mpll_sdiv = 0x0,
-		.cpll_mdiv = 0xde,
-		.cpll_pdiv = 0x4,
-		.cpll_sdiv = 0x2,
-		.gpll_mdiv = 0x215,
-		.gpll_pdiv = 0xc,
-		.gpll_sdiv = 0x1,
-		.epll_mdiv = 0x60,
-		.epll_pdiv = 0x3,
-		.epll_sdiv = 0x3,
-		.vpll_mdiv = 0x96,
-		.vpll_pdiv = 0x3,
-		.vpll_sdiv = 0x2,
-
-		.bpll_mdiv = 0x82,
-		.bpll_pdiv = 0x4,
-		.bpll_sdiv = 0x0,
-		.use_bpll = 1,
-		.pclk_cdrex_ratio = 0x5,
-		.direct_cmd_msr = {
-			0x00020018, 0x00030000, 0x00010042, 0x00000d70
-		},
-		.timing_ref = 0x000000bb,
-		.timing_row = 0x8c36660f,
-		.timing_data = 0x3630580b,
-		.timing_power = 0x41000a44,
-		.phy0_dqs = 0x08080808,
-		.phy1_dqs = 0x08080808,
-		.phy0_dq = 0x08080808,
-		.phy1_dq = 0x08080808,
-		.phy0_tFS = 0x4,
-		.phy1_tFS = 0x4,
-		.phy0_pulld_dqs = 0xf,
-		.phy1_pulld_dqs = 0xf,
-
-		.lpddr3_ctrl_phy_reset = 0x1,
-		.ctrl_start_point = 0x10,
-		.ctrl_inc = 0x10,
-		.ctrl_start = 0x1,
-		.ctrl_dll_on = 0x1,
-		.ctrl_ref = 0x8,
-
-		.ctrl_force = 0x1a,
-		.ctrl_rdlat = 0x0b,
-		.ctrl_bstlen = 0x08,
-
-		.fp_resync = 0x8,
-		.iv_size = 0x7,
-		.dfi_init_start = 1,
-		.aref_en = 1,
-
-		.rd_fetch = 0x3,
-
-		.zq_mode_dds = 0x7,
-		.zq_mode_term = 0x1,
-		.zq_mode_noterm = 0,
-
-		/*
-		* Dynamic Clock: Always Running
-		* Memory Burst length: 8
-		* Number of chips: 1
-		* Memory Bus width: 32 bit
-		* Memory Type: DDR3
-		* Additional Latancy for PLL: 0 Cycle
-		*/
-		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
-			DMC_MEMCONTROL_TP_DISABLE |
-			DMC_MEMCONTROL_DSREF_ENABLE |
-			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
-			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
-			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
-			DMC_MEMCONTROL_NUM_CHIP_1 |
-			DMC_MEMCONTROL_BL_8 |
-			DMC_MEMCONTROL_PZQ_DISABLE |
-			DMC_MEMCONTROL_MRR_BYTE_7_0,
-		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
-			DMC_MEMCONFIGx_CHIP_COL_10 |
-			DMC_MEMCONFIGx_CHIP_ROW_15 |
-			DMC_MEMCONFIGx_CHIP_BANK_8,
-		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
-		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
-		.prechconfig_tp_cnt = 0xff,
-		.dpwrdn_cyc = 0xff,
-		.dsref_cyc = 0xffff,
-		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
-			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
-			DMC_CONCONTROL_RD_FETCH_DISABLE |
-			DMC_CONCONTROL_EMPTY_DISABLE |
-			DMC_CONCONTROL_AREF_EN_DISABLE |
-			DMC_CONCONTROL_IO_PD_CON_DISABLE,
-		.dmc_channels = 2,
-		.chips_per_channel = 2,
-		.chips_to_configure = 1,
-		.send_zq_init = 1,
-		.impedance = IMP_OUTPUT_DRV_30_OHM,
-		.gate_leveling_enable = 0,
-	}, {
-		.mem_manuf = MEM_MANUF_SAMSUNG,
-		.mem_type = DDR_MODE_DDR3,
-		.frequency_mhz = 780,
-		.mpll_mdiv = 0x64,
-		.mpll_pdiv = 0x3,
-		.mpll_sdiv = 0x0,
-		.cpll_mdiv = 0xde,
-		.cpll_pdiv = 0x4,
-		.cpll_sdiv = 0x2,
-		.gpll_mdiv = 0x215,
-		.gpll_pdiv = 0xc,
-		.gpll_sdiv = 0x1,
-		.epll_mdiv = 0x60,
-		.epll_pdiv = 0x3,
-		.epll_sdiv = 0x3,
-		.vpll_mdiv = 0x96,
-		.vpll_pdiv = 0x3,
-		.vpll_sdiv = 0x2,
-
-		.bpll_mdiv = 0x82,
-		.bpll_pdiv = 0x4,
-		.bpll_sdiv = 0x0,
-		.use_bpll = 1,
-		.pclk_cdrex_ratio = 0x5,
-		.direct_cmd_msr = {
-			0x00020018, 0x00030000, 0x00010000, 0x00000d70
-		},
-		.timing_ref = 0x000000bb,
-		.timing_row = 0x8c36660f,
-		.timing_data = 0x3630580b,
-		.timing_power = 0x41000a44,
-		.phy0_dqs = 0x08080808,
-		.phy1_dqs = 0x08080808,
-		.phy0_dq = 0x08080808,
-		.phy1_dq = 0x08080808,
-		.phy0_tFS = 0x8,
-		.phy1_tFS = 0x8,
-		.phy0_pulld_dqs = 0xf,
-		.phy1_pulld_dqs = 0xf,
-
-		.lpddr3_ctrl_phy_reset = 0x1,
-		.ctrl_start_point = 0x10,
-		.ctrl_inc = 0x10,
-		.ctrl_start = 0x1,
-		.ctrl_dll_on = 0x1,
-		.ctrl_ref = 0x8,
-
-		.ctrl_force = 0x1a,
-		.ctrl_rdlat = 0x0b,
-		.ctrl_bstlen = 0x08,
-
-		.fp_resync = 0x8,
-		.iv_size = 0x7,
-		.dfi_init_start = 1,
-		.aref_en = 1,
-
-		.rd_fetch = 0x3,
-
-		.zq_mode_dds = 0x5,
-		.zq_mode_term = 0x1,
-		.zq_mode_noterm = 1,
-
-		/*
-		* Dynamic Clock: Always Running
-		* Memory Burst length: 8
-		* Number of chips: 1
-		* Memory Bus width: 32 bit
-		* Memory Type: DDR3
-		* Additional Latancy for PLL: 0 Cycle
-		*/
-		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
-			DMC_MEMCONTROL_TP_DISABLE |
-			DMC_MEMCONTROL_DSREF_ENABLE |
-			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
-			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
-			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
-			DMC_MEMCONTROL_NUM_CHIP_1 |
-			DMC_MEMCONTROL_BL_8 |
-			DMC_MEMCONTROL_PZQ_DISABLE |
-			DMC_MEMCONTROL_MRR_BYTE_7_0,
-		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
-			DMC_MEMCONFIGx_CHIP_COL_10 |
-			DMC_MEMCONFIGx_CHIP_ROW_15 |
-			DMC_MEMCONFIGx_CHIP_BANK_8,
-		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
-		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
-		.prechconfig_tp_cnt = 0xff,
-		.dpwrdn_cyc = 0xff,
-		.dsref_cyc = 0xffff,
-		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
-			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
-			DMC_CONCONTROL_RD_FETCH_DISABLE |
-			DMC_CONCONTROL_EMPTY_DISABLE |
-			DMC_CONCONTROL_AREF_EN_DISABLE |
-			DMC_CONCONTROL_IO_PD_CON_DISABLE,
-		.dmc_channels = 2,
-		.chips_per_channel = 2,
-		.chips_to_configure = 1,
-		.send_zq_init = 1,
-		.impedance = IMP_OUTPUT_DRV_40_OHM,
-		.gate_leveling_enable = 1,
-	}
-};
-
-/**
- * Detect what memory is present based on board strappings
- *
- * Boards have various resistor stuff options that are supposed to match
- * which SDRAM is present (and which revision of the board this is).  This
- * uses the resistor stuff options to figure out what memory manufacturer
- * to use for matching in the memory tables.
- *
- * @return A MEM_MANUF_XXX constant, or -1 if an error occurred.
- */
-/*
- * FIXME(dhendrix): This unwinds into a mess of board-specific code. The
- * board's romstage.c file should detect the memory type and pass in
- * appropriate parameters to whatever calls this.
- */
-#define BOARD_REV_ELPIDA_MEMORY		3
-#define BOARD_REV_SAMSUNG_MEMORY	4
-
-static inline int board_get_revision(void)
-{
-	/* FIXME: yuck! */
-	return BOARD_REV_ELPIDA_MEMORY;
-}
-
-static int autodetect_memory(void)
-{
-	int board_rev = board_get_revision();
-
-	if (board_rev == -1)
-		return -1;
-
-	switch (board_rev) {
-	case BOARD_REV_SAMSUNG_MEMORY:
-		return MEM_MANUF_SAMSUNG;
-	case BOARD_REV_ELPIDA_MEMORY:
-		return MEM_MANUF_ELPIDA;
-	}
-
-	return -1;
-}
-
-#ifdef CONFIG_SPL_BUILD
-
-#define SIGNATURE	0xdeadbeef
-
-/* Parameters of early board initialization in SPL */
-static struct spl_machine_param machine_param = {
-	.signature	= SIGNATURE,
-	.version	= 1,
-	.params		= "vmubfasirMw",
-	.size		= sizeof(machine_param),
-
-	.mem_iv_size	= 0x1f,
-	.mem_type	= DDR_MODE_DDR3,
-
-	/*
-	 * Set uboot_size to 0x100000 bytes.
-	 *
-	 * This is an overly conservative value chosen to accommodate all
-	 * possible U-Boot image.  You are advised to set this value to a
-	 * smaller realistic size via scripts that modifies the .machine_param
-	 * section of output U-Boot image.
-	 */
-	.uboot_size	= 0x100000,
-
-	.boot_source	= BOOT_MODE_OM,
-	.frequency_mhz	= 800,
-	.arm_freq_mhz	= 1700,
-	.serial_base	= 0x12c30000,
-	.i2c_base	= 0x12c60000,
-//	.board_rev_gpios = GPIO_D00 | (GPIO_D01 << 16),
-	.mem_manuf	= MEM_MANUF_SAMSUNG,
-//	.bad_wake_gpio	= GPIO_Y10,
-};
-
-/**
- * Get the required memory type and speed (SPL version).
- *
- * In SPL we have no device tree, so we use the machine parameters
- */
-int clock_get_mem_selection(enum ddr_mode *mem_type,
-		unsigned *frequency_mhz, unsigned *arm_freq,
-		enum mem_manuf *mem_manuf)
-{
-	struct spl_machine_param *params;
-
-	params = &machine_param;
-	*mem_type = params->mem_type;
-	*frequency_mhz = params->frequency_mhz;
-	*arm_freq = params->arm_freq_mhz;
-	if (params->mem_manuf == MEM_MANUF_AUTODETECT) {
-		*mem_manuf = autodetect_memory();
-		if (*mem_manuf == -1)
-			return -1;
-	} else {
-		*mem_manuf = params->mem_manuf;
-	}
-
-	return 0;
-}
-
-#else
-
-static const char *mem_types[DDR_MODE_COUNT] = {
-	"DDR2", "DDR3", "LPDDR2", "LPDDR3"
-};
-
-static const char *mem_manufs[MEM_MANUF_COUNT] = {
-	"autodetect", "Elpida", "Samsung"
-};
-
-int clock_get_mem_selection(enum ddr_mode *mem_type,
-		unsigned *frequency_mhz, unsigned *arm_freq,
-		enum mem_manuf *mem_manuf)
-{
-	const char *typestr;
-	int node, i;
-
-	node = fdtdec_next_compatible(gd->fdt_blob, 0,
-				      COMPAT_SAMSUNG_EXYNOS_DMC);
-	if (node < 0)
-		die("No memory information available in device tree");
-	typestr = fdt_getprop(gd->fdt_blob, node, "mem-type", NULL);
-	for (i = 0; i < DDR_MODE_COUNT; i++) {
-		if (!stricmp(typestr, mem_types[i]))
-			break;
-	}
-	if (i == DDR_MODE_COUNT)
-		die("Invalid memory type in device tree");
-	*mem_type = i;
-
-	typestr = fdt_getprop(gd->fdt_blob, node, "mem-manuf", NULL);
-	for (i = 0; i < MEM_MANUF_COUNT; i++) {
-		if (!stricmp(typestr, mem_manufs[i]))
-			break;
-	}
-	if (i == MEM_MANUF_COUNT)
-		die("Invalid memory manufacturer in device tree");
-
-	if (i == MEM_MANUF_AUTODETECT) {
-		*mem_manuf = autodetect_memory();
-		if (*mem_manuf == -1)
-			return -1;
-	} else {
-		*mem_manuf = i;
-	}
-
-	*frequency_mhz = fdtdec_get_int(gd->fdt_blob, node, "clock-frequency",
-					0);
-	if (!*frequency_mhz)
-		die("Invalid memory frequency in device tree");
-
-	*arm_freq = fdtdec_get_int(gd->fdt_blob, node, "arm-frequency", 0);
-	/* TODO: Remove all these panics/dies, and just return an error code */
-	if (!*arm_freq)
-		die("Invalid ARM frequency in device tree");
-
-	return 0;
-}
-
-const char *clock_get_mem_type_name(enum ddr_mode mem_type)
-{
-	if (mem_type >= 0 && mem_type < DDR_MODE_COUNT)
-		return mem_types[mem_type];
-
-	return "<unknown>";
-}
-
-const char *clock_get_mem_manuf_name(enum mem_manuf mem_manuf)
-{
-	if (mem_manuf >= 0 && mem_manuf < MEM_MANUF_COUNT)
-		return mem_manufs[mem_manuf];
-
-	return "<unknown>";
-}
-#endif
-
-/* Get the ratios for setting ARM clock */
-struct arm_clk_ratios *get_arm_ratios(void);	/* FIXME: silence compiler... */
-struct arm_clk_ratios *get_arm_ratios(void)
-{
-	struct arm_clk_ratios *arm_ratio;
-	enum ddr_mode mem_type;
-	enum mem_manuf mem_manuf;
-	unsigned frequency_mhz, arm_freq;
-	int i;
-
-	/* TODO(sjg@chromium.org): Return NULL and have caller deal with it */
-	if (clock_get_mem_selection(&mem_type, &frequency_mhz,
-					&arm_freq, &mem_manuf))
-		;
-	for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
-		i++, arm_ratio++) {
-		if (arm_ratio->arm_freq_mhz == arm_freq)
-			return arm_ratio;
-	}
-
-//	die("get_arm_ratios: Failed to find ratio\n");
-	return NULL;
-}
-
-struct mem_timings *clock_get_mem_timings(void)
-{
-	/* FIXME: hard-coded for now */
-	return &mem_timings[0];
-#if 0
-	struct mem_timings *mem;
-	enum ddr_mode mem_type;
-	enum mem_manuf mem_manuf;
-	unsigned frequency_mhz, arm_freq;
-	int i;
-
-	if (!clock_get_mem_selection(&mem_type, &frequency_mhz,
-						&arm_freq, &mem_manuf)) {
-		for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
-				i++, mem++) {
-			if (mem->mem_type == mem_type &&
-					mem->frequency_mhz == frequency_mhz &&
-					mem->mem_manuf == mem_manuf)
-				return mem;
-		}
-	}
-	return NULL;
-#endif
-}
-
-void system_clock_init(void)
+void system_clock_init(struct mem_timings *mem,
+		struct arm_clk_ratios *arm_clk_ratio)
 {
 	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
 	struct exynos5_mct_regs *mct_regs =
 		(struct exynos5_mct_regs *)EXYNOS5_MULTI_CORE_TIMER_BASE;
-	struct mem_timings *mem;
-	struct arm_clk_ratios *arm_clk_ratio;
 	u32 val, tmp;
 
 	/* Turn on the MCT as early as possible. */
 	mct_regs->g_tcon |= (1 << 8);
 
-	mem = clock_get_mem_timings();
-	arm_clk_ratio = get_arm_ratios();
-
 	clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK);
 	do {
 		val = readl(&clk->mux_stat_cpu);
diff --git a/src/cpu/samsung/exynos5250/clock_init.h b/src/cpu/samsung/exynos5250/clock_init.h
index 00561a0b58..3757e7d761 100644
--- a/src/cpu/samsung/exynos5250/clock_init.h
+++ b/src/cpu/samsung/exynos5250/clock_init.h
@@ -25,10 +25,6 @@
 #ifndef __EXYNOS_CLOCK_INIT_H
 #define __EXYNOS_CLOCK_INIT_H
 
-enum {
-	MEM_TIMINGS_MSR_COUNT	= 4,
-};
-
 /* These are the ratio's for configuring ARM clock */
 struct arm_clk_ratios {
 	unsigned int arm_freq_mhz;	/* Frequency of ARM core in MHz */
@@ -47,104 +43,17 @@ struct arm_clk_ratios {
 	unsigned int arm_ratio;
 };
 
-/* These are the memory timings for a particular memory type and speed */
-struct mem_timings {
-	enum mem_manuf mem_manuf;	/* Memory manufacturer */
-	enum ddr_mode mem_type;		/* Memory type */
-	unsigned int frequency_mhz;	/* Frequency of memory in MHz */
-
-	/* Here follow the timing parameters for the selected memory */
-	uint8_t apll_mdiv;
-	uint8_t apll_pdiv;
-	uint8_t apll_sdiv;
-	uint8_t mpll_mdiv;
-	uint8_t mpll_pdiv;
-	uint8_t mpll_sdiv;
-	uint8_t cpll_mdiv;
-	uint8_t cpll_pdiv;
-	uint8_t cpll_sdiv;
-	uint8_t gpll_pdiv;
-	uint16_t gpll_mdiv;
-	uint8_t gpll_sdiv;
-	uint8_t epll_mdiv;
-	uint8_t epll_pdiv;
-	uint8_t epll_sdiv;
-	uint8_t vpll_mdiv;
-	uint8_t vpll_pdiv;
-	uint8_t vpll_sdiv;
-	uint8_t bpll_mdiv;
-	uint8_t bpll_pdiv;
-	uint8_t bpll_sdiv;
-	uint8_t use_bpll;       /* 1 to use BPLL for cdrex, 0 to use MPLL */
-	uint8_t pclk_cdrex_ratio;
-	unsigned int direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
-
-	unsigned int timing_ref;
-	unsigned int timing_row;
-	unsigned int timing_data;
-	unsigned int timing_power;
-
-	/* DQS, DQ, DEBUG offsets */
-	unsigned int phy0_dqs;
-	unsigned int phy1_dqs;
-	unsigned int phy0_dq;
-	unsigned int phy1_dq;
-	uint8_t phy0_tFS;
-	uint8_t phy1_tFS;
-	uint8_t phy0_pulld_dqs;
-	uint8_t phy1_pulld_dqs;
-
-	uint8_t lpddr3_ctrl_phy_reset;
-	uint8_t ctrl_start_point;
-	uint8_t ctrl_inc;
-	uint8_t ctrl_start;
-	uint8_t ctrl_dll_on;
-	uint8_t ctrl_ref;
-
-	uint8_t ctrl_force;
-	uint8_t ctrl_rdlat;
-	uint8_t ctrl_bstlen;
-
-	uint8_t fp_resync;
-	uint8_t iv_size;
-	uint8_t dfi_init_start;
-	uint8_t aref_en;
-
-	uint8_t rd_fetch;
-
-	uint8_t zq_mode_dds;
-	uint8_t zq_mode_term;
-	uint8_t zq_mode_noterm;	/* 1 to allow termination disable */
-
-	unsigned int memcontrol;
-	unsigned int memconfig;
-
-	unsigned int membaseconfig0;
-	unsigned int membaseconfig1;
-	unsigned int prechconfig_tp_cnt;
-	unsigned int dpwrdn_cyc;
-	unsigned int dsref_cyc;
-	unsigned int concontrol;
-	/* Channel and Chip Selection */
-	uint8_t dmc_channels;		/* number of memory channels */
-	uint8_t chips_per_channel;	/* number of chips per channel */
-	uint8_t chips_to_configure;	/* number of chips to configure */
-	uint8_t send_zq_init;		/* 1 to send this command */
-	unsigned int impedance;		/* drive strength impedeance */
-	uint8_t gate_leveling_enable;	/* check gate leveling is enabled */
-};
-
 /**
- * Get the correct memory timings for our selected memory type and speed.
- *
- * This function can be called from SPL or the main U-Boot.
+ * Get the clock ratios for CPU configuration
  *
- * @return pointer to the memory timings that we should use
+ * @return pointer to the clock ratios that we should use
  */
-struct mem_timings *clock_get_mem_timings(void);
+struct arm_clk_ratios *get_arm_clk_ratios(void);
 
 /*
  * Initialize clock for the device
  */
-void system_clock_init(void);
+struct mem_timings;
+void system_clock_init(struct mem_timings *mem,
+		struct arm_clk_ratios *arm_clk_ratio);
 #endif
diff --git a/src/cpu/samsung/exynos5250/dmc.h b/src/cpu/samsung/exynos5250/dmc.h
index 9b1f29305d..0814c07afb 100644
--- a/src/cpu/samsung/exynos5250/dmc.h
+++ b/src/cpu/samsung/exynos5250/dmc.h
@@ -175,6 +175,10 @@ enum mem_manuf {
 	MEM_MANUF_COUNT = 2, // fancy that.
 };
 
+enum {
+	MEM_TIMINGS_MSR_COUNT	= 4,
+};
+
 #define DMC_INTERLEAVE_SIZE		0x1f
 
 /* CONCONTROL register fields */
@@ -224,5 +228,99 @@ enum mem_manuf {
 #define PHY_CON42_CTRL_RDLAT_SHIFT	0
 #define PHY_CON42_CTRL_RDLAT_MASK	(0x1f << PHY_CON42_CTRL_RDLAT_SHIFT)
 
+/* These are the memory timings for a particular memory type and speed */
+struct mem_timings {
+	enum mem_manuf mem_manuf;	/* Memory manufacturer */
+	enum ddr_mode mem_type;		/* Memory type */
+	unsigned int frequency_mhz;	/* Frequency of memory in MHz */
+
+	/* Here follow the timing parameters for the selected memory */
+	uint8_t apll_mdiv;
+	uint8_t apll_pdiv;
+	uint8_t apll_sdiv;
+	uint8_t mpll_mdiv;
+	uint8_t mpll_pdiv;
+	uint8_t mpll_sdiv;
+	uint8_t cpll_mdiv;
+	uint8_t cpll_pdiv;
+	uint8_t cpll_sdiv;
+	uint8_t gpll_pdiv;
+	uint16_t gpll_mdiv;
+	uint8_t gpll_sdiv;
+	uint8_t epll_mdiv;
+	uint8_t epll_pdiv;
+	uint8_t epll_sdiv;
+	uint8_t vpll_mdiv;
+	uint8_t vpll_pdiv;
+	uint8_t vpll_sdiv;
+	uint8_t bpll_mdiv;
+	uint8_t bpll_pdiv;
+	uint8_t bpll_sdiv;
+	uint8_t use_bpll;       /* 1 to use BPLL for cdrex, 0 to use MPLL */
+	uint8_t pclk_cdrex_ratio;
+	unsigned int direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
+
+	unsigned int timing_ref;
+	unsigned int timing_row;
+	unsigned int timing_data;
+	unsigned int timing_power;
+
+	/* DQS, DQ, DEBUG offsets */
+	unsigned int phy0_dqs;
+	unsigned int phy1_dqs;
+	unsigned int phy0_dq;
+	unsigned int phy1_dq;
+	uint8_t phy0_tFS;
+	uint8_t phy1_tFS;
+	uint8_t phy0_pulld_dqs;
+	uint8_t phy1_pulld_dqs;
+
+	uint8_t lpddr3_ctrl_phy_reset;
+	uint8_t ctrl_start_point;
+	uint8_t ctrl_inc;
+	uint8_t ctrl_start;
+	uint8_t ctrl_dll_on;
+	uint8_t ctrl_ref;
+
+	uint8_t ctrl_force;
+	uint8_t ctrl_rdlat;
+	uint8_t ctrl_bstlen;
+
+	uint8_t fp_resync;
+	uint8_t iv_size;
+	uint8_t dfi_init_start;
+	uint8_t aref_en;
+
+	uint8_t rd_fetch;
+
+	uint8_t zq_mode_dds;
+	uint8_t zq_mode_term;
+	uint8_t zq_mode_noterm;	/* 1 to allow termination disable */
+
+	unsigned int memcontrol;
+	unsigned int memconfig;
+
+	unsigned int membaseconfig0;
+	unsigned int membaseconfig1;
+	unsigned int prechconfig_tp_cnt;
+	unsigned int dpwrdn_cyc;
+	unsigned int dsref_cyc;
+	unsigned int concontrol;
+	/* Channel and Chip Selection */
+	uint8_t dmc_channels;		/* number of memory channels */
+	uint8_t chips_per_channel;	/* number of chips per channel */
+	uint8_t chips_to_configure;	/* number of chips to configure */
+	uint8_t send_zq_init;		/* 1 to send this command */
+	unsigned int impedance;		/* drive strength impedeance */
+	uint8_t gate_leveling_enable;	/* check gate leveling is enabled */
+};
+
+/**
+ * Get the correct memory timings for our selected memory type and speed.
+ *
+ * @return pointer to the memory timings that we should use
+ */
+struct mem_timings *get_mem_timings(void);
+
 #endif
 #endif
diff --git a/src/cpu/samsung/s5p-common/s5p_gpio.c b/src/cpu/samsung/s5p-common/s5p_gpio.c
index f09d0a4ee5..0023beb141 100644
--- a/src/cpu/samsung/s5p-common/s5p_gpio.c
+++ b/src/cpu/samsung/s5p-common/s5p_gpio.c
@@ -20,6 +20,7 @@
 
 /* FIXME(dhendrix): fix this up so it doesn't require a bunch of #ifdefs... */
 #include <common.h>
+#include <gpio.h>
 //#include <arch/io.h>
 #include <gpio.h>
 #include <arch/gpio.h>
diff --git a/src/mainboard/google/snow/Makefile.inc b/src/mainboard/google/snow/Makefile.inc
index a43bcbcc16..130c3545cb 100644
--- a/src/mainboard/google/snow/Makefile.inc
+++ b/src/mainboard/google/snow/Makefile.inc
@@ -17,6 +17,12 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 ##
 
+# needed for system_clock_init()
+bootblock-y += mainboard.c
+bootblock-y += memory.c
+
+romstage-y += mainboard.c
+romstage-y += memory.c
 romstage-y += romstage.c
 
 # ramstage-y += ec.c
diff --git a/src/mainboard/google/snow/bootblock.c b/src/mainboard/google/snow/bootblock.c
index 1985662c9a..90a2de188e 100644
--- a/src/mainboard/google/snow/bootblock.c
+++ b/src/mainboard/google/snow/bootblock.c
@@ -345,393 +345,6 @@ static void power_init(void)
 						REG_ENABLE, MAX77686_MV);
 }
 
-/* FIXME(dhendrix): this will be removed in a follow-up patch */
-struct mem_timings my_mem_timings[] = {
-	{
-		.mem_manuf = MEM_MANUF_ELPIDA,
-		.mem_type = DDR_MODE_DDR3,
-		.frequency_mhz = 800,
-		.mpll_mdiv = 0x64,
-		.mpll_pdiv = 0x3,
-		.mpll_sdiv = 0x0,
-		.cpll_mdiv = 0xde,
-		.cpll_pdiv = 0x4,
-		.cpll_sdiv = 0x2,
-		.gpll_mdiv = 0x215,
-		.gpll_pdiv = 0xc,
-		.gpll_sdiv = 0x1,
-		.epll_mdiv = 0x60,
-		.epll_pdiv = 0x3,
-		.epll_sdiv = 0x3,
-		.vpll_mdiv = 0x96,
-		.vpll_pdiv = 0x3,
-		.vpll_sdiv = 0x2,
-
-		.bpll_mdiv = 0x64,
-		.bpll_pdiv = 0x3,
-		.bpll_sdiv = 0x0,
-		.use_bpll = 0,
-		.pclk_cdrex_ratio = 0x5,
-		.direct_cmd_msr = {
-			0x00020018, 0x00030000, 0x00010042, 0x00000d70
-		},
-		.timing_ref = 0x000000bb,
-		.timing_row = 0x8c36660f,
-		.timing_data = 0x3630580b,
-		.timing_power = 0x41000a44,
-		.phy0_dqs = 0x08080808,
-		.phy1_dqs = 0x08080808,
-		.phy0_dq = 0x08080808,
-		.phy1_dq = 0x08080808,
-		.phy0_tFS = 0x4,
-		.phy1_tFS = 0x4,
-		.phy0_pulld_dqs = 0xf,
-		.phy1_pulld_dqs = 0xf,
-
-		.lpddr3_ctrl_phy_reset = 0x1,
-		.ctrl_start_point = 0x10,
-		.ctrl_inc = 0x10,
-		.ctrl_start = 0x1,
-		.ctrl_dll_on = 0x1,
-		.ctrl_ref = 0x8,
-
-		.ctrl_force = 0x1a,
-		.ctrl_rdlat = 0x0b,
-		.ctrl_bstlen = 0x08,
-
-		.fp_resync = 0x8,
-		.iv_size = 0x7,
-		.dfi_init_start = 1,
-		.aref_en = 1,
-
-		.rd_fetch = 0x3,
-
-		.zq_mode_dds = 0x7,
-		.zq_mode_term = 0x1,
-		.zq_mode_noterm = 0,
-
-		/*
-		* Dynamic Clock: Always Running
-		* Memory Burst length: 8
-		* Number of chips: 1
-		* Memory Bus width: 32 bit
-		* Memory Type: DDR3
-		* Additional Latancy for PLL: 0 Cycle
-		*/
-		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
-			DMC_MEMCONTROL_TP_DISABLE |
-			DMC_MEMCONTROL_DSREF_ENABLE |
-			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
-			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
-			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
-			DMC_MEMCONTROL_NUM_CHIP_1 |
-			DMC_MEMCONTROL_BL_8 |
-			DMC_MEMCONTROL_PZQ_DISABLE |
-			DMC_MEMCONTROL_MRR_BYTE_7_0,
-		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
-			DMC_MEMCONFIGx_CHIP_COL_10 |
-			DMC_MEMCONFIGx_CHIP_ROW_15 |
-			DMC_MEMCONFIGx_CHIP_BANK_8,
-		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
-		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
-		.prechconfig_tp_cnt = 0xff,
-		.dpwrdn_cyc = 0xff,
-		.dsref_cyc = 0xffff,
-		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
-			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
-			DMC_CONCONTROL_RD_FETCH_DISABLE |
-			DMC_CONCONTROL_EMPTY_DISABLE |
-			DMC_CONCONTROL_AREF_EN_DISABLE |
-			DMC_CONCONTROL_IO_PD_CON_DISABLE,
-		.dmc_channels = 2,
-		.chips_per_channel = 2,
-		.chips_to_configure = 1,
-		.send_zq_init = 1,
-		.impedance = IMP_OUTPUT_DRV_30_OHM,
-		.gate_leveling_enable = 0,
-	},
-};
-
-/* FIXME(dhendrix): this will be removed in a follow-up patch */
-struct arm_clk_ratios my_arm_clk_ratios[] = {
-	{
-		.arm_freq_mhz = 1700,
-
-		.apll_mdiv = 0x1a9,
-		.apll_pdiv = 0x6,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x6,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}
-};
-
-static void clock_init(void)
-{
-	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
-	struct exynos5_mct_regs *mct_regs =
-		(struct exynos5_mct_regs *)EXYNOS5_MULTI_CORE_TIMER_BASE;
-	struct mem_timings *mem = &my_mem_timings[0];
-	struct arm_clk_ratios *arm_clk_ratio = &my_arm_clk_ratios[0];
-	u32 val, tmp;
-
-	/* Turn on the MCT as early as possible. */
-	mct_regs->g_tcon |= (1 << 8);
-
-//	mem = clock_get_mem_timings();
-//	arm_clk_ratio = get_arm_ratios();
-
-	clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK);
-	do {
-		val = readl(&clk->mux_stat_cpu);
-	} while ((val | MUX_APLL_SEL_MASK) != val);
-
-	clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK);
-	do {
-		val = readl(&clk->mux_stat_core1);
-	} while ((val | MUX_MPLL_SEL_MASK) != val);
-
-	clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK);
-	clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK);
-	clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK);
-	clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK);
-	tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
-		| MUX_GPLL_SEL_MASK;
-	do {
-		val = readl(&clk->mux_stat_top2);
-	} while ((val | tmp) != val);
-
-	clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK);
-	do {
-		val = readl(&clk->mux_stat_cdrex);
-	} while ((val | MUX_BPLL_SEL_MASK) != val);
-
-	/* PLL locktime */
-	writel(APLL_LOCK_VAL, &clk->apll_lock);
-
-	writel(MPLL_LOCK_VAL, &clk->mpll_lock);
-
-	writel(BPLL_LOCK_VAL, &clk->bpll_lock);
-
-	writel(CPLL_LOCK_VAL, &clk->cpll_lock);
-
-	writel(GPLL_LOCK_VAL, &clk->gpll_lock);
-
-	writel(EPLL_LOCK_VAL, &clk->epll_lock);
-
-	writel(VPLL_LOCK_VAL, &clk->vpll_lock);
-
-	writel(CLK_REG_DISABLE, &clk->pll_div2_sel);
-
-	writel(MUX_HPM_SEL_MASK, &clk->src_cpu);
-	do {
-		val = readl(&clk->mux_stat_cpu);
-	} while ((val | HPM_SEL_SCLK_MPLL) != val);
-
-	val = arm_clk_ratio->arm2_ratio << 28
-		| arm_clk_ratio->apll_ratio << 24
-		| arm_clk_ratio->pclk_dbg_ratio << 20
-		| arm_clk_ratio->atb_ratio << 16
-		| arm_clk_ratio->periph_ratio << 12
-		| arm_clk_ratio->acp_ratio << 8
-		| arm_clk_ratio->cpud_ratio << 4
-		| arm_clk_ratio->arm_ratio;
-	writel(val, &clk->div_cpu0);
-	do {
-		val = readl(&clk->div_stat_cpu0);
-	} while (0 != val);
-
-	writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
-	do {
-		val = readl(&clk->div_stat_cpu1);
-	} while (0 != val);
-
-	/* Set APLL */
-	writel(APLL_CON1_VAL, &clk->apll_con1);
-	val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
-			arm_clk_ratio->apll_sdiv);
-	writel(val, &clk->apll_con0);
-	while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set MPLL */
-	writel(MPLL_CON1_VAL, &clk->mpll_con1);
-	val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
-	writel(val, &clk->mpll_con0);
-	while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0)
-		;
-
-	/*
-	 * Configure MUX_MPLL_FOUT to choose the direct clock source
-	 * path and avoid the fixed DIV/2 block to save power
-	 */
-	setbits_le32(&clk->pll_div2_sel, MUX_MPLL_FOUT_SEL);
-
-	/* Set BPLL */
-	if (mem->use_bpll) {
-		writel(BPLL_CON1_VAL, &clk->bpll_con1);
-		val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
-		writel(val, &clk->bpll_con0);
-		while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0)
-			;
-
-		setbits_le32(&clk->pll_div2_sel, MUX_BPLL_FOUT_SEL);
-	}
-
-	/* Set CPLL */
-	writel(CPLL_CON1_VAL, &clk->cpll_con1);
-	val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
-	writel(val, &clk->cpll_con0);
-	while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set GPLL */
-	writel(GPLL_CON1_VAL, &clk->gpll_con1);
-	val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
-	writel(val, &clk->gpll_con0);
-	while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set EPLL */
-	writel(EPLL_CON2_VAL, &clk->epll_con2);
-	writel(EPLL_CON1_VAL, &clk->epll_con1);
-	val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
-	writel(val, &clk->epll_con0);
-	while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set VPLL */
-	writel(VPLL_CON2_VAL, &clk->vpll_con2);
-	writel(VPLL_CON1_VAL, &clk->vpll_con1);
-	val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
-	writel(val, &clk->vpll_con0);
-	while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0)
-		;
-
-	writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
-	writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
-	while (readl(&clk->div_stat_core0) != 0)
-		;
-
-	writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
-	while (readl(&clk->div_stat_core1) != 0)
-		;
-
-	writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt);
-	while (readl(&clk->div_stat_sysrgt) != 0)
-		;
-
-	writel(CLK_DIV_ACP_VAL, &clk->div_acp);
-	while (readl(&clk->div_stat_acp) != 0)
-		;
-
-	writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft);
-	while (readl(&clk->div_stat_syslft) != 0)
-		;
-
-	writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
-	writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
-	writel(TOP2_VAL, &clk->src_top2);
-	writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
-
-	writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
-	while (readl(&clk->div_stat_top0))
-		;
-
-	writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
-	while (readl(&clk->div_stat_top1))
-		;
-
-	writel(CLK_SRC_LEX_VAL, &clk->src_lex);
-	while (1) {
-		val = readl(&clk->mux_stat_lex);
-		if (val == (val | 1))
-			break;
-	}
-
-	writel(CLK_DIV_LEX_VAL, &clk->div_lex);
-	while (readl(&clk->div_stat_lex))
-		;
-
-	writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
-	while (readl(&clk->div_stat_r0x))
-		;
-
-	writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
-	while (readl(&clk->div_stat_r0x))
-		;
-
-	writel(CLK_DIV_R1X_VAL, &clk->div_r1x);
-	while (readl(&clk->div_stat_r1x))
-		;
-
-	if (mem->use_bpll) {
-		writel(MUX_BPLL_SEL_MASK | MUX_MCLK_CDREX_SEL |
-			MUX_MCLK_DPHY_SEL, &clk->src_cdrex);
-	} else {
-		writel(CLK_REG_DISABLE, &clk->src_cdrex);
-	}
-
-	writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
-	while (readl(&clk->div_stat_cdrex))
-		;
-
-	val = readl(&clk->src_cpu);
-	val |= CLK_SRC_CPU_VAL;
-	writel(val, &clk->src_cpu);
-
-	val = readl(&clk->src_top2);
-	val |= CLK_SRC_TOP2_VAL;
-	writel(val, &clk->src_top2);
-
-	val = readl(&clk->src_core1);
-	val |= CLK_SRC_CORE1_VAL;
-	writel(val, &clk->src_core1);
-
-	writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
-	writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
-	while (readl(&clk->div_stat_fsys0))
-		;
-
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_core);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_top);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex);
-
-	writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
-	writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
-
-	writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1);
-	writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1);
-	writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2);
-	writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp);
-	writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp);
-	writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
-	writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
-	writel(CLK_DIV_ISP2_VAL, &clk->div_isp2);
-
-	/* FIMD1 SRC CLK SELECTION */
-	writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0);
-
-	val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET
-		| MMC2_RATIO_VAL << MMC2_RATIO_OFFSET
-		| MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET
-		| MMC3_RATIO_VAL << MMC3_RATIO_OFFSET;
-	writel(val, &clk->div_fsys2);
-}
-
 #include <console/vtxprintf.h>
 #include <string.h>
 #define ZEROPAD	1		/* pad with zero */
@@ -1025,12 +638,17 @@ int do_printk(int msg_level, const char *fmt, ...)
 void bootblock_mainboard_init(void);
 void bootblock_mainboard_init(void)
 {
+	struct mem_timings *mem;
+	struct arm_clk_ratios *arm_ratios;
+
 	/* FIXME: we should not need UART in bootblock, this is only
 	   done for testing purposes */
 	i2c_set_early_reg(I2C0_BASE);
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	power_init();
-	clock_init();
+	mem = get_mem_timings();
+	arm_ratios = get_arm_clk_ratios();
+	system_clock_init(mem, arm_ratios);
 	do_serial();
 	printk(BIOS_INFO, "%s: UART initialized\n", __func__);
 
diff --git a/src/mainboard/google/snow/mainboard.c b/src/mainboard/google/snow/mainboard.c
index f11f1fa395..efe6672435 100644
--- a/src/mainboard/google/snow/mainboard.c
+++ b/src/mainboard/google/snow/mainboard.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 The ChromeOS Authors
+ * Copyright (C) 2012 Google Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -17,18 +17,60 @@
  * MA 02111-1307 USA
  */
 
+#include <stdlib.h>
+#include <gpio.h>
 #include <device/device.h>
 #include <console/console.h>
 
-// mainboard_enable is executed as first thing after
-// enumerate_buses().
+#include <cpu/samsung/exynos5-common/gpio.h>
+#include <cpu/samsung/exynos5250/gpio.h>
 
-static void mainboard_enable(device_t dev)
+#include "mainboard.h"
+
+#define SNOW_BOARD_ID0_GPIO	88	/* GPD0, pin 0 */
+#define SNOW_BOARD_ID1_GPIO	89	/* GPD0, pin 1 */
+
+struct {
+	enum mvl3 id0, id1;
+	enum snow_board_config config;
+} snow_id_map[] = {
+	/*  ID0      ID1         config */
+	{ LOGIC_0, LOGIC_0, SNOW_CONFIG_SAMSUNG_MP },
+	{ LOGIC_0, LOGIC_1, SNOW_CONFIG_ELPIDA_MP },
+	{ LOGIC_1, LOGIC_0, SNOW_CONFIG_SAMSUNG_DVT },
+	{ LOGIC_1, LOGIC_1, SNOW_CONFIG_ELPIDA_DVT },
+	{ LOGIC_0, LOGIC_Z, SNOW_CONFIG_SAMSUNG_PVT },
+	{ LOGIC_1, LOGIC_Z, SNOW_CONFIG_ELPIDA_PVT },
+	{ LOGIC_Z, LOGIC_0, SNOW_CONFIG_SAMSUNG_MP },
+	{ LOGIC_Z, LOGIC_Z, SNOW_CONFIG_ELPIDA_MP },
+	{ LOGIC_Z, LOGIC_1, SNOW_CONFIG_RSVD },
+};
+
+int board_get_config(void)
 {
-	//dev->ops->init = mainboard_init;
+	int i;
+	int id0, id1;
+	enum snow_board_config config = SNOW_CONFIG_UNKNOWN;
+
+	id0 = gpio_read_mvl3(SNOW_BOARD_ID0_GPIO);
+	id1 = gpio_read_mvl3(SNOW_BOARD_ID1_GPIO);
+	if (id0 < 0 || id1 < 0)
+		return -1;
+	printk(BIOS_DEBUG, "%s: id0: %u, id1: %u\n", __func__, id0, id1);
+
+	for (i = 0; i < ARRAY_SIZE(snow_id_map); i++) {
+		if (id0 == snow_id_map[i].id0 && id1 == snow_id_map[i].id1) {
+			config = snow_id_map[i].config;
+			break;
+		}
+	}
+
+	return config;
 }
 
+#if 0
 struct chip_operations mainboard_ops = {
 	.name	= "Samsung/Google ARM ChromeBook",
 	.enable_dev = mainboard_enable,
 };
+#endif
diff --git a/src/mainboard/google/snow/mainboard.h b/src/mainboard/google/snow/mainboard.h
new file mode 100644
index 0000000000..6fe371fc99
--- /dev/null
+++ b/src/mainboard/google/snow/mainboard.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MAINBOARD_H
+#define MAINBOARD_H
+
+enum snow_board_config {
+	SNOW_CONFIG_UNKNOWN = -1,
+	SNOW_CONFIG_SAMSUNG_EVT,
+	SNOW_CONFIG_ELPIDA_EVT,
+	SNOW_CONFIG_SAMSUNG_DVT,
+	SNOW_CONFIG_ELPIDA_DVT,
+	SNOW_CONFIG_SAMSUNG_PVT,
+	SNOW_CONFIG_ELPIDA_PVT,
+	SNOW_CONFIG_SAMSUNG_MP,
+	SNOW_CONFIG_ELPIDA_MP,
+	SNOW_CONFIG_RSVD,
+};
+
+int board_get_config(void);
+
+#endif	/* MAINBOARD_H */
diff --git a/src/mainboard/google/snow/memory.c b/src/mainboard/google/snow/memory.c
new file mode 100644
index 0000000000..ba8c91fd6e
--- /dev/null
+++ b/src/mainboard/google/snow/memory.c
@@ -0,0 +1,494 @@
+/*
+ * This file is part of the coreboot project. It is based off code
+ * from Das U-Boot.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Copyright (C) 2013 The ChromiumOS Authors.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <console/console.h>
+
+#include <cpu/samsung/exynos5250/setup.h>
+#include <cpu/samsung/exynos5250/dmc.h>
+#include <cpu/samsung/exynos5250/clock_init.h>
+
+#include "mainboard.h"
+
+struct mem_timings mem_timings[] = {
+	{
+		.mem_manuf = MEM_MANUF_ELPIDA,
+		.mem_type = DDR_MODE_DDR3,
+		.frequency_mhz = 800,
+		.mpll_mdiv = 0x64,
+		.mpll_pdiv = 0x3,
+		.mpll_sdiv = 0x0,
+		.cpll_mdiv = 0xde,
+		.cpll_pdiv = 0x4,
+		.cpll_sdiv = 0x2,
+		.gpll_mdiv = 0x215,
+		.gpll_pdiv = 0xc,
+		.gpll_sdiv = 0x1,
+		.epll_mdiv = 0x60,
+		.epll_pdiv = 0x3,
+		.epll_sdiv = 0x3,
+		.vpll_mdiv = 0x96,
+		.vpll_pdiv = 0x3,
+		.vpll_sdiv = 0x2,
+
+		.bpll_mdiv = 0x64,
+		.bpll_pdiv = 0x3,
+		.bpll_sdiv = 0x0,
+		.use_bpll = 0,
+		.pclk_cdrex_ratio = 0x5,
+		.direct_cmd_msr = {
+			0x00020018, 0x00030000, 0x00010042, 0x00000d70
+		},
+		.timing_ref = 0x000000bb,
+		.timing_row = 0x8c36660f,
+		.timing_data = 0x3630580b,
+		.timing_power = 0x41000a44,
+		.phy0_dqs = 0x08080808,
+		.phy1_dqs = 0x08080808,
+		.phy0_dq = 0x08080808,
+		.phy1_dq = 0x08080808,
+		.phy0_tFS = 0x4,
+		.phy1_tFS = 0x4,
+		.phy0_pulld_dqs = 0xf,
+		.phy1_pulld_dqs = 0xf,
+
+		.lpddr3_ctrl_phy_reset = 0x1,
+		.ctrl_start_point = 0x10,
+		.ctrl_inc = 0x10,
+		.ctrl_start = 0x1,
+		.ctrl_dll_on = 0x1,
+		.ctrl_ref = 0x8,
+
+		.ctrl_force = 0x1a,
+		.ctrl_rdlat = 0x0b,
+		.ctrl_bstlen = 0x08,
+
+		.fp_resync = 0x8,
+		.iv_size = 0x7,
+		.dfi_init_start = 1,
+		.aref_en = 1,
+
+		.rd_fetch = 0x3,
+
+		.zq_mode_dds = 0x7,
+		.zq_mode_term = 0x1,
+		.zq_mode_noterm = 0,
+
+		/*
+		* Dynamic Clock: Always Running
+		* Memory Burst length: 8
+		* Number of chips: 1
+		* Memory Bus width: 32 bit
+		* Memory Type: DDR3
+		* Additional Latancy for PLL: 0 Cycle
+		*/
+		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+			DMC_MEMCONTROL_TP_DISABLE |
+			DMC_MEMCONTROL_DSREF_ENABLE |
+			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+			DMC_MEMCONTROL_NUM_CHIP_1 |
+			DMC_MEMCONTROL_BL_8 |
+			DMC_MEMCONTROL_PZQ_DISABLE |
+			DMC_MEMCONTROL_MRR_BYTE_7_0,
+		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
+			DMC_MEMCONFIGx_CHIP_COL_10 |
+			DMC_MEMCONFIGx_CHIP_ROW_15 |
+			DMC_MEMCONFIGx_CHIP_BANK_8,
+		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
+		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
+		.prechconfig_tp_cnt = 0xff,
+		.dpwrdn_cyc = 0xff,
+		.dsref_cyc = 0xffff,
+		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+			DMC_CONCONTROL_RD_FETCH_DISABLE |
+			DMC_CONCONTROL_EMPTY_DISABLE |
+			DMC_CONCONTROL_AREF_EN_DISABLE |
+			DMC_CONCONTROL_IO_PD_CON_DISABLE,
+		.dmc_channels = 2,
+		.chips_per_channel = 2,
+		.chips_to_configure = 1,
+		.send_zq_init = 1,
+		.impedance = IMP_OUTPUT_DRV_30_OHM,
+		.gate_leveling_enable = 0,
+	}, {
+		.mem_manuf = MEM_MANUF_SAMSUNG,
+		.mem_type = DDR_MODE_DDR3,
+		.frequency_mhz = 800,
+		.mpll_mdiv = 0x64,
+		.mpll_pdiv = 0x3,
+		.mpll_sdiv = 0x0,
+		.cpll_mdiv = 0xde,
+		.cpll_pdiv = 0x4,
+		.cpll_sdiv = 0x2,
+		.gpll_mdiv = 0x215,
+		.gpll_pdiv = 0xc,
+		.gpll_sdiv = 0x1,
+		.epll_mdiv = 0x60,
+		.epll_pdiv = 0x3,
+		.epll_sdiv = 0x3,
+		.vpll_mdiv = 0x96,
+		.vpll_pdiv = 0x3,
+		.vpll_sdiv = 0x2,
+
+		.bpll_mdiv = 0x64,
+		.bpll_pdiv = 0x3,
+		.bpll_sdiv = 0x0,
+		.use_bpll = 0,
+		.pclk_cdrex_ratio = 0x5,
+		.direct_cmd_msr = {
+			0x00020018, 0x00030000, 0x00010000, 0x00000d70
+		},
+		.timing_ref = 0x000000bb,
+		.timing_row = 0x8c36660f,
+		.timing_data = 0x3630580b,
+		.timing_power = 0x41000a44,
+		.phy0_dqs = 0x08080808,
+		.phy1_dqs = 0x08080808,
+		.phy0_dq = 0x08080808,
+		.phy1_dq = 0x08080808,
+		.phy0_tFS = 0x8,
+		.phy1_tFS = 0x8,
+		.phy0_pulld_dqs = 0xf,
+		.phy1_pulld_dqs = 0xf,
+
+		.lpddr3_ctrl_phy_reset = 0x1,
+		.ctrl_start_point = 0x10,
+		.ctrl_inc = 0x10,
+		.ctrl_start = 0x1,
+		.ctrl_dll_on = 0x1,
+		.ctrl_ref = 0x8,
+
+		.ctrl_force = 0x1a,
+		.ctrl_rdlat = 0x0b,
+		.ctrl_bstlen = 0x08,
+
+		.fp_resync = 0x8,
+		.iv_size = 0x7,
+		.dfi_init_start = 1,
+		.aref_en = 1,
+
+		.rd_fetch = 0x3,
+
+		.zq_mode_dds = 0x5,
+		.zq_mode_term = 0x1,
+		.zq_mode_noterm = 1,
+
+		/*
+		* Dynamic Clock: Always Running
+		* Memory Burst length: 8
+		* Number of chips: 1
+		* Memory Bus width: 32 bit
+		* Memory Type: DDR3
+		* Additional Latancy for PLL: 0 Cycle
+		*/
+		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+			DMC_MEMCONTROL_TP_DISABLE |
+			DMC_MEMCONTROL_DSREF_ENABLE |
+			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+			DMC_MEMCONTROL_NUM_CHIP_1 |
+			DMC_MEMCONTROL_BL_8 |
+			DMC_MEMCONTROL_PZQ_DISABLE |
+			DMC_MEMCONTROL_MRR_BYTE_7_0,
+		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
+			DMC_MEMCONFIGx_CHIP_COL_10 |
+			DMC_MEMCONFIGx_CHIP_ROW_15 |
+			DMC_MEMCONFIGx_CHIP_BANK_8,
+		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
+		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
+		.prechconfig_tp_cnt = 0xff,
+		.dpwrdn_cyc = 0xff,
+		.dsref_cyc = 0xffff,
+		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+			DMC_CONCONTROL_RD_FETCH_DISABLE |
+			DMC_CONCONTROL_EMPTY_DISABLE |
+			DMC_CONCONTROL_AREF_EN_DISABLE |
+			DMC_CONCONTROL_IO_PD_CON_DISABLE,
+		.dmc_channels = 2,
+		.chips_per_channel = 2,
+		.chips_to_configure = 1,
+		.send_zq_init = 1,
+		.impedance = IMP_OUTPUT_DRV_40_OHM,
+		.gate_leveling_enable = 1,
+	},
+	{
+		.mem_manuf = MEM_MANUF_ELPIDA,
+		.mem_type = DDR_MODE_DDR3,
+		.frequency_mhz = 780,
+		.mpll_mdiv = 0x64,
+		.mpll_pdiv = 0x3,
+		.mpll_sdiv = 0x0,
+		.cpll_mdiv = 0xde,
+		.cpll_pdiv = 0x4,
+		.cpll_sdiv = 0x2,
+		.gpll_mdiv = 0x215,
+		.gpll_pdiv = 0xc,
+		.gpll_sdiv = 0x1,
+		.epll_mdiv = 0x60,
+		.epll_pdiv = 0x3,
+		.epll_sdiv = 0x3,
+		.vpll_mdiv = 0x96,
+		.vpll_pdiv = 0x3,
+		.vpll_sdiv = 0x2,
+
+		.bpll_mdiv = 0x82,
+		.bpll_pdiv = 0x4,
+		.bpll_sdiv = 0x0,
+		.use_bpll = 1,
+		.pclk_cdrex_ratio = 0x5,
+		.direct_cmd_msr = {
+			0x00020018, 0x00030000, 0x00010042, 0x00000d70
+		},
+		.timing_ref = 0x000000bb,
+		.timing_row = 0x8c36660f,
+		.timing_data = 0x3630580b,
+		.timing_power = 0x41000a44,
+		.phy0_dqs = 0x08080808,
+		.phy1_dqs = 0x08080808,
+		.phy0_dq = 0x08080808,
+		.phy1_dq = 0x08080808,
+		.phy0_tFS = 0x4,
+		.phy1_tFS = 0x4,
+		.phy0_pulld_dqs = 0xf,
+		.phy1_pulld_dqs = 0xf,
+
+		.lpddr3_ctrl_phy_reset = 0x1,
+		.ctrl_start_point = 0x10,
+		.ctrl_inc = 0x10,
+		.ctrl_start = 0x1,
+		.ctrl_dll_on = 0x1,
+		.ctrl_ref = 0x8,
+
+		.ctrl_force = 0x1a,
+		.ctrl_rdlat = 0x0b,
+		.ctrl_bstlen = 0x08,
+
+		.fp_resync = 0x8,
+		.iv_size = 0x7,
+		.dfi_init_start = 1,
+		.aref_en = 1,
+
+		.rd_fetch = 0x3,
+
+		.zq_mode_dds = 0x7,
+		.zq_mode_term = 0x1,
+		.zq_mode_noterm = 0,
+
+		/*
+		* Dynamic Clock: Always Running
+		* Memory Burst length: 8
+		* Number of chips: 1
+		* Memory Bus width: 32 bit
+		* Memory Type: DDR3
+		* Additional Latancy for PLL: 0 Cycle
+		*/
+		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+			DMC_MEMCONTROL_TP_DISABLE |
+			DMC_MEMCONTROL_DSREF_ENABLE |
+			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+			DMC_MEMCONTROL_NUM_CHIP_1 |
+			DMC_MEMCONTROL_BL_8 |
+			DMC_MEMCONTROL_PZQ_DISABLE |
+			DMC_MEMCONTROL_MRR_BYTE_7_0,
+		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
+			DMC_MEMCONFIGx_CHIP_COL_10 |
+			DMC_MEMCONFIGx_CHIP_ROW_15 |
+			DMC_MEMCONFIGx_CHIP_BANK_8,
+		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
+		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
+		.prechconfig_tp_cnt = 0xff,
+		.dpwrdn_cyc = 0xff,
+		.dsref_cyc = 0xffff,
+		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+			DMC_CONCONTROL_RD_FETCH_DISABLE |
+			DMC_CONCONTROL_EMPTY_DISABLE |
+			DMC_CONCONTROL_AREF_EN_DISABLE |
+			DMC_CONCONTROL_IO_PD_CON_DISABLE,
+		.dmc_channels = 2,
+		.chips_per_channel = 2,
+		.chips_to_configure = 1,
+		.send_zq_init = 1,
+		.impedance = IMP_OUTPUT_DRV_30_OHM,
+		.gate_leveling_enable = 0,
+	}, {
+		.mem_manuf = MEM_MANUF_SAMSUNG,
+		.mem_type = DDR_MODE_DDR3,
+		.frequency_mhz = 780,
+		.mpll_mdiv = 0x64,
+		.mpll_pdiv = 0x3,
+		.mpll_sdiv = 0x0,
+		.cpll_mdiv = 0xde,
+		.cpll_pdiv = 0x4,
+		.cpll_sdiv = 0x2,
+		.gpll_mdiv = 0x215,
+		.gpll_pdiv = 0xc,
+		.gpll_sdiv = 0x1,
+		.epll_mdiv = 0x60,
+		.epll_pdiv = 0x3,
+		.epll_sdiv = 0x3,
+		.vpll_mdiv = 0x96,
+		.vpll_pdiv = 0x3,
+		.vpll_sdiv = 0x2,
+
+		.bpll_mdiv = 0x82,
+		.bpll_pdiv = 0x4,
+		.bpll_sdiv = 0x0,
+		.use_bpll = 1,
+		.pclk_cdrex_ratio = 0x5,
+		.direct_cmd_msr = {
+			0x00020018, 0x00030000, 0x00010000, 0x00000d70
+		},
+		.timing_ref = 0x000000bb,
+		.timing_row = 0x8c36660f,
+		.timing_data = 0x3630580b,
+		.timing_power = 0x41000a44,
+		.phy0_dqs = 0x08080808,
+		.phy1_dqs = 0x08080808,
+		.phy0_dq = 0x08080808,
+		.phy1_dq = 0x08080808,
+		.phy0_tFS = 0x8,
+		.phy1_tFS = 0x8,
+		.phy0_pulld_dqs = 0xf,
+		.phy1_pulld_dqs = 0xf,
+
+		.lpddr3_ctrl_phy_reset = 0x1,
+		.ctrl_start_point = 0x10,
+		.ctrl_inc = 0x10,
+		.ctrl_start = 0x1,
+		.ctrl_dll_on = 0x1,
+		.ctrl_ref = 0x8,
+
+		.ctrl_force = 0x1a,
+		.ctrl_rdlat = 0x0b,
+		.ctrl_bstlen = 0x08,
+
+		.fp_resync = 0x8,
+		.iv_size = 0x7,
+		.dfi_init_start = 1,
+		.aref_en = 1,
+
+		.rd_fetch = 0x3,
+
+		.zq_mode_dds = 0x5,
+		.zq_mode_term = 0x1,
+		.zq_mode_noterm = 1,
+
+		/*
+		* Dynamic Clock: Always Running
+		* Memory Burst length: 8
+		* Number of chips: 1
+		* Memory Bus width: 32 bit
+		* Memory Type: DDR3
+		* Additional Latancy for PLL: 0 Cycle
+		*/
+		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+			DMC_MEMCONTROL_TP_DISABLE |
+			DMC_MEMCONTROL_DSREF_ENABLE |
+			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+			DMC_MEMCONTROL_NUM_CHIP_1 |
+			DMC_MEMCONTROL_BL_8 |
+			DMC_MEMCONTROL_PZQ_DISABLE |
+			DMC_MEMCONTROL_MRR_BYTE_7_0,
+		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
+			DMC_MEMCONFIGx_CHIP_COL_10 |
+			DMC_MEMCONFIGx_CHIP_ROW_15 |
+			DMC_MEMCONFIGx_CHIP_BANK_8,
+		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
+		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
+		.prechconfig_tp_cnt = 0xff,
+		.dpwrdn_cyc = 0xff,
+		.dsref_cyc = 0xffff,
+		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+			DMC_CONCONTROL_RD_FETCH_DISABLE |
+			DMC_CONCONTROL_EMPTY_DISABLE |
+			DMC_CONCONTROL_AREF_EN_DISABLE |
+			DMC_CONCONTROL_IO_PD_CON_DISABLE,
+		.dmc_channels = 2,
+		.chips_per_channel = 2,
+		.chips_to_configure = 1,
+		.send_zq_init = 1,
+		.impedance = IMP_OUTPUT_DRV_40_OHM,
+		.gate_leveling_enable = 1,
+	}
+};
+
+struct mem_timings *get_mem_timings(void)
+{
+	int i;
+	enum snow_board_config board_config;
+	enum ddr_mode mem_type;
+	unsigned int frequency_mhz;
+	enum mem_manuf mem_manuf;
+	struct mem_timings *mem;
+	
+	board_config = board_get_config();
+	switch (board_config) {
+	case SNOW_CONFIG_ELPIDA_EVT:
+	case SNOW_CONFIG_ELPIDA_DVT:
+	case SNOW_CONFIG_ELPIDA_PVT:
+	case SNOW_CONFIG_ELPIDA_MP:
+		mem_manuf = MEM_MANUF_ELPIDA;
+		mem_type = DDR_MODE_DDR3;
+		frequency_mhz = 800;
+		break;
+	case SNOW_CONFIG_SAMSUNG_EVT:
+	case SNOW_CONFIG_SAMSUNG_DVT:
+	case SNOW_CONFIG_SAMSUNG_PVT:
+	case SNOW_CONFIG_SAMSUNG_MP:
+		mem_manuf = MEM_MANUF_SAMSUNG;
+		mem_type = DDR_MODE_DDR3;
+		frequency_mhz = 800;
+		break;
+	default:
+		printk(BIOS_CRIT, "Unable to determine board config\n");
+		return NULL;
+	}
+
+	for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
+			i++, mem++) {
+		if (mem->mem_type == mem_type &&
+			mem->frequency_mhz == frequency_mhz &&
+			mem->mem_manuf == mem_manuf)
+			return mem;
+	}
+
+	return NULL;
+}
diff --git a/src/mainboard/google/snow/romstage.c b/src/mainboard/google/snow/romstage.c
index fae371a3de..03fd1be550 100644
--- a/src/mainboard/google/snow/romstage.c
+++ b/src/mainboard/google/snow/romstage.c
@@ -24,13 +24,14 @@
 #include <cbfs.h>
 #include <common.h>
 
-#include <cpu/samsung/exynos5250/setup.h>
 #include <cpu/samsung/exynos5250/dmc.h>
-#include <cpu/samsung/exynos5250/clock_init.h>
+#include <cpu/samsung/exynos5250/setup.h>
+
 #include <console/console.h>
-#include <arch/bootblock_exit.h>
 #include <arch/stages.h>
 
+#include "mainboard.h"
+
 void main(void)
 {
 	struct cbfs_media cbfs;
@@ -43,28 +44,31 @@ void main(void)
 	struct mem_timings *mem;
 	int ret;
 
-	mem = clock_get_mem_timings();
-	printk(BIOS_SPEW, "clock_get_mem_timings returns 0x%p\n", mem);
+	mem = get_mem_timings();
+	if (!mem) {
+		printk(BIOS_CRIT, "Unable to auto-detect memory timings\n");
+		while(1);
+	}
 	printk(BIOS_SPEW, "man: 0x%x type: 0x%x, div: 0x%x, mhz: 0x%x\n",
 		mem->mem_manuf,
 		mem->mem_type,
 		mem->mpll_mdiv,
 		mem->frequency_mhz);
 
-       ret = ddr3_mem_ctrl_init(mem, DMC_INTERLEAVE_SIZE);
-       if (ret) {
-               printk(BIOS_ERR, "Memory controller init failed, err: %x\n",
-                      ret);
-               while(1);
-       }
+	ret = ddr3_mem_ctrl_init(mem, DMC_INTERLEAVE_SIZE);
+	if (ret) {
+		printk(BIOS_ERR, "Memory controller init failed, err: %x\n",
+		ret);
+		while(1);
+	}
 
-       printk(BIOS_INFO, "ddr3_init done\n");
+	printk(BIOS_INFO, "ddr3_init done\n");
        /* wow, did it work? */
 	int i;
 	u32 *c = (void *)CONFIG_RAMBASE;
 
 //	mmu_setup(CONFIG_SYS_SDRAM_BASE, CONFIG_DRAM_SIZE_MB * 1024);
-//      printk(BIOS_INFO, "mmu_setup done\n");
+//	printk(BIOS_INFO, "mmu_setup done\n");
 	for(i = 0; i < 16384; i++)
 		c[i] = i+32768;
 	for(i = 0; i < 16384; i++)
@@ -72,6 +76,7 @@ void main(void)
 			printk(BIOS_SPEW, "BADc[%02x]: %02x,", i, c[i]);
 	for(i = 0; i < 1048576; i++)
 		c[i] = 0;
+
 	ret = init_default_cbfs_media(&cbfs);
 	if (ret){
 		printk(BIOS_ERR, "init_default_cbfs_media returned %d: HALT\n",