src/superio: Drop unneeded empty lines

Change-Id: I3fd0cc00f32fa073cb2a6faf2802acdbe7db592c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44614
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

8 files changed, 0 insertions, 9 deletions

diff --git a/src/superio/fintek/f81866d/f81866d_hwm.c b/src/superio/fintek/f81866d/f81866d_hwm.c
index a682a158e3..a7ed96bb26 100644
--- a/src/superio/fintek/f81866d/f81866d_hwm.c
+++ b/src/superio/fintek/f81866d/f81866d_hwm.c
@@ -10,7 +10,6 @@
 #include "fintek_internal.h"
 #include "chip.h"
 
-
 /* Register addresses */
 // Choose between AMD and Intel
 #define HWM_AMD_TSI_ADDR		0x08
@@ -37,7 +36,6 @@
 #define HWM_FAN2_SEG4_SPEED_COUNT	0xBD
 #define HWM_FAN2_SEG5_SPEED_COUNT	0xBE
 
-
 void f81866d_hwm_init(struct device *dev)
 {
 	struct resource *res = find_resource(dev, PNP_IDX_IO0);
diff --git a/src/superio/ite/common/early_serial.c b/src/superio/ite/common/early_serial.c
index 48e414b0da..6b05a382e7 100644
--- a/src/superio/ite/common/early_serial.c
+++ b/src/superio/ite/common/early_serial.c
@@ -45,7 +45,6 @@ void ite_reg_write(pnp_devfn_t dev, u8 reg, u8 value)
 	pnp_exit_conf_state(dev);
 }
 
-
 /*
  * in romstage.c
  * #define CLKIN_DEV PNP_DEV(0x2e, ITE_GPIO)
diff --git a/src/superio/ite/it8528e/it8528e.h b/src/superio/ite/it8528e/it8528e.h
index 13e723c9be..009f8666d9 100644
--- a/src/superio/ite/it8528e/it8528e.h
+++ b/src/superio/ite/it8528e/it8528e.h
@@ -19,5 +19,4 @@
 #define IT8528E_PMC4 0x18 /* Power Management Channel 4 */
 #define IT8528E_PMC5 0x19 /* Power Management Channel 5 */
 
-
 #endif /* SUPERIO_ITE_IT8528E_H */
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h
index 2663884eb7..949ec116f5 100644
--- a/src/superio/ite/it8772f/it8772f.h
+++ b/src/superio/ite/it8772f/it8772f.h
@@ -129,5 +129,4 @@ void it8772f_exit_conf(pnp_devfn_t dev);
 void it8772f_gpio_led(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup,
 			u8 output, u8 enable, u8 led_pin_map, u8 led_freq);
 
-
 #endif /* SUPERIO_ITE_IT8772F_H */
diff --git a/src/superio/nuvoton/nct6779d/nct6779d.h b/src/superio/nuvoton/nct6779d/nct6779d.h
index 46abf05c70..85f4081368 100644
--- a/src/superio/nuvoton/nct6779d/nct6779d.h
+++ b/src/superio/nuvoton/nct6779d/nct6779d.h
@@ -20,7 +20,6 @@
 #define NCT6779D_PRT80		0x14 /* Port 80 UART */
 #define NCT6779D_DSLP		0x16 /* Deep sleep */
 
-
 /* virtual LDN for GPIO */
 
 #define NCT6779D_GPIOBASE	((0 << 8) | NCT6779D_WDT1_GPIO01_V)
diff --git a/src/superio/nuvoton/nct6779d/superio.c b/src/superio/nuvoton/nct6779d/superio.c
index ef50aa6c05..77058b0bc3 100644
--- a/src/superio/nuvoton/nct6779d/superio.c
+++ b/src/superio/nuvoton/nct6779d/superio.c
@@ -7,7 +7,6 @@
 
 #include "nct6779d.h"
 
-
 static void nct6779d_init(struct device *dev)
 {
 	if (!dev->enabled)
diff --git a/src/superio/smsc/sch5545/sch5545.h b/src/superio/smsc/sch5545/sch5545.h
index 464be1a106..9d5054efa0 100644
--- a/src/superio/smsc/sch5545/sch5545.h
+++ b/src/superio/smsc/sch5545/sch5545.h
@@ -131,7 +131,6 @@
 #define SCH5545_IRQ_PARPORT			0x11
 #define SCH5545_IRQ_DISABLED			0xff
 
-
 /* runtime registers */
 #define SCH5545_RR_PME_STS			0x00
 #define   SCH5545_GLOBAL_PME_STS		0x01
diff --git a/src/superio/smsc/smscsuperio/early_serial.c b/src/superio/smsc/smscsuperio/early_serial.c
index 81ec0aab5c..b9f6e70fef 100644
--- a/src/superio/smsc/smscsuperio/early_serial.c
+++ b/src/superio/smsc/smscsuperio/early_serial.c
@@ -24,7 +24,6 @@ static void pnp_exit_conf_state(pnp_devfn_t dev)
 	outb(SMSC_EXIT_KEY, port);
 }
 
-
 /**
  * Enable the specified serial port.
  *