urara: add clock setup for MIPS CPU, ROM and Ethernet

BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works properly
BRANCH=none

Change-Id: Ie386d6af9eeba7a72b1b88d515e6cb1821569c6b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d4b8d8b6f965296f9ecf62da8e5f383c3667b077
Original-Change-Id: I9eb464340b0475ae735ba5573ab0841dac0d74eb
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243215
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9669
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

3 files changed, 94 insertions, 3 deletions

diff --git a/src/mainboard/google/urara/bootblock.c b/src/mainboard/google/urara/bootblock.c
index 6d90d5932e..b21a8885f4 100644
--- a/src/mainboard/google/urara/bootblock.c
+++ b/src/mainboard/google/urara/bootblock.c
@@ -110,13 +110,27 @@ static int init_clocks(void)
 	/* System PLL divided by 2 -> 400 MHz */
 	/* The same frequency will be the input frequency for the SPFI block */
 	system_clk_setup(1);
+
+	/* MIPS CPU dividers: division by 1 -> 550 MHz
+	 * This is set up as we cannot make any assumption about
+	 * the values set or not by the boot ROM code */
+	mips_clk_setup(0, 0);
+
 	/* System clock divided by 8 -> 50 MHz */
 	ret = usb_clk_setup(7, 2, 7);
 	if (ret != CLOCKS_OK)
 		return ret;
+
 	/* System PLL divided by 7 divided by 62 -> 1.8433 Mhz */
 	uart1_clk_setup(6, 61);
 
+	/* Ethernet clocks setup: ENET as clock source */
+	eth_clk_setup(0, 7);
+
+	/* ROM clock setup: system clock divided by 2 -> 200 MHz */
+	/* Hash accelerator is driven from the ROM clock */
+	rom_clk_setup(1);
+
 	/* Setup system PLL at 800 MHz */
 	ret = sys_pll_setup(2, 1);
 	if (ret != CLOCKS_OK)
diff --git a/src/soc/imgtec/pistachio/clocks.c b/src/soc/imgtec/pistachio/clocks.c
index 1b7722fe74..d50abf578d 100644
--- a/src/soc/imgtec/pistachio/clocks.c
+++ b/src/soc/imgtec/pistachio/clocks.c
@@ -68,6 +68,12 @@
 #define SYSCLKINTERNAL_CTRL_ADDR	0xB8144244
 #define SYSCLKINTERNAL_MASK		0X00000007
 
+/* Definitions for MIPS clock setup */
+#define MIPSCLKINTERNAL_CTRL_ADDR	0xB8144204
+#define MIPSCLKINTERNAL_MASK		0x00000003
+#define MIPSCLKOUT_CTRL_ADDR		0xB8144208
+#define MIPSCLKOUT_MASK			0x000000FF
+
 /* Definitions for USB clock setup */
 #define USBPHYCLKOUT_CTRL_ADDR		0xB814422C
 #define USBPHYCLKOUT_MASK		0X0000003F
@@ -92,6 +98,15 @@
 #define UART1CLKOUT_CTRL_ADDR		0xB8144240
 #define UART1CLKOUT_MASK		0x000003FF
 
+/* Definitions for ROM clock setup */
+#define ROMCLKOUT_CTRL_ADDR		0xB814410C
+#define ROMCLKOUT_MASK			0x0000007F
+
+/* Definitions for ETH clock setup */
+#define ENETCLKMUX_MASK			0x00004000
+#define ENETCLKDIV_CTRL_ADDR		0xB8144230
+#define ENETCLKDIV_MASK			0x0000003F
+
 /* Definitions for timeout values */
 #define PLL_TIMEOUT_VALUE_US		20000
 #define USB_TIMEOUT_VALUE_US		200000
@@ -303,6 +318,27 @@ void system_clk_setup(u8 divider)
 	udelay(SYS_CLK_LOCK_DELAY);
 }
 
+void mips_clk_setup(u8 divider1, u8 divider2)
+{
+	u32 reg;
+
+	/* Check input parameters */
+	assert(!(divider1 & ~(MIPSCLKINTERNAL_MASK)));
+	assert(!(divider2 & ~(MIPSCLKOUT_MASK)));
+
+	/* Set divider 1 */
+	reg = read32(MIPSCLKINTERNAL_CTRL_ADDR);
+	reg &= ~MIPSCLKINTERNAL_MASK;
+	reg |= divider1 & MIPSCLKINTERNAL_MASK;
+	write32(MIPSCLKINTERNAL_CTRL_ADDR, reg);
+
+	/* Set divider 2 */
+	reg = read32(MIPSCLKOUT_CTRL_ADDR);
+	reg &= ~MIPSCLKOUT_MASK;
+	reg |= divider2 & MIPSCLKOUT_MASK;
+	write32(MIPSCLKOUT_CTRL_ADDR, reg);
+}
+
 /* usb_clk_setup: sets up USB clock */
 int usb_clk_setup(u8 divider, u8 refclksel, u8 fsel)
 {
@@ -352,3 +388,42 @@ int usb_clk_setup(u8 divider, u8 refclksel, u8 fsel)
 
 	return CLOCKS_OK;
 }
+
+void rom_clk_setup(u8 divider)
+{
+	u32 reg;
+
+	/* Check input parameter */
+	assert(!(divider & ~(ROMCLKOUT_MASK)));
+
+	/* Set ROM divider */
+	reg = read32(ROMCLKOUT_CTRL_ADDR);
+	reg &= ~ROMCLKOUT_MASK;
+	reg |= divider & ROMCLKOUT_MASK;
+	write32(ROMCLKOUT_CTRL_ADDR, reg);
+}
+
+void eth_clk_setup(u8 mux, u8 divider)
+{
+
+	u32 reg;
+
+	/* Check input parameters */
+	assert(!(divider & ~(ENETCLKDIV_MASK)));
+	/* This can be either 0 or 1, selecting between
+	 * ENET and system clock as clocksource */
+	assert(!(mux & ~(0x1)));
+
+	/* Set ETH divider */
+	reg = read32(ENETCLKDIV_CTRL_ADDR);
+	reg &= ~ENETCLKDIV_MASK;
+	reg |= divider & ENETCLKDIV_MASK;
+	write32(ENETCLKDIV_CTRL_ADDR, reg);
+
+	/* Select source */
+	if (mux) {
+		reg = read32(PISTACHIO_CLOCK_SWITCH);
+		reg |= ENETCLKMUX_MASK;
+		write32(PISTACHIO_CLOCK_SWITCH, reg);
+	}
+}
diff --git a/src/soc/imgtec/pistachio/include/soc/clocks.h b/src/soc/imgtec/pistachio/include/soc/clocks.h
index 95b35857a5..f57d43d89e 100644
--- a/src/soc/imgtec/pistachio/include/soc/clocks.h
+++ b/src/soc/imgtec/pistachio/include/soc/clocks.h
@@ -22,13 +22,15 @@
 
 /* Functions for PLL setting */
 int sys_pll_setup(u8 divider1, u8 divider2);
-int mips_pll_setup(u8 divider1, u8 divider2i, u8 predivider, u32 feedback);
+int mips_pll_setup(u8 divider1, u8 divider2, u8 predivider, u32 feedback);
 
 /* Peripheral divider setting */
-void uart1_clk_setup(u8 divider1, u16 divider2);
 void system_clk_setup(u8 divider);
+void mips_clk_setup(u8 divider1, u8 divider2);
+void uart1_clk_setup(u8 divider1, u16 divider2);
 int usb_clk_setup(u8 divider, u8 refclksel, u8 fsel);
-
+void rom_clk_setup(u8 divider);
+void eth_clk_setup(u8 mux, u8 divider);
 enum {
 	CLOCKS_OK = 0,
 	PLL_TIMEOUT = -1,