diff options
| author | Angel Pons <th3fanbus@gmail.com> | 2020-12-17 13:47:13 +0100 |
|---|---|---|
| committer | Angel Pons <th3fanbus@gmail.com> | 2020-12-21 19:30:05 +0000 |
| commit | db27d6f6d04468959decd8ceb0d558dc35dc6cc3 (patch) | |
| tree | f00eb798569506b45dc75458a7b076c602126218 | |
| parent | 3b879f46b49b756b4f6e851d97677a821e11ce1d (diff) | |
mb/prodrive/hermes: Update USB 2.0 settings
Test results show that USB signals look better with these settings.
Yes, there's a macro in the devicetree now. All ports use the same
settings except for the overcurrent pin, so this avoids redundancy.
Change-Id: Ib0dafab88d8dcc05388b724f6a7183c13ac64934
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48694
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
| -rw-r--r-- | src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb | 50 |
1 files changed, 27 insertions, 23 deletions
diff --git a/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb b/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb index b543a78c5c..4d35c47ddb 100644 --- a/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb +++ b/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb @@ -85,43 +85,47 @@ chip soc/intel/cannonlake register "PcieClkSrcClkReq[4]" = "4" # M2_M_CLK_REQ_n register "PcieClkSrcClkReq[5]" = "5" # M2_E_CLK_REQ_n + # USB OC5-7: not connected + register "usb2_ports" = "{ + +#define HERMES_USB2_CONFIG(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_0MV, \ + .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_28P15MV, \ + .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \ +} + [0] = HERMES_USB2_CONFIG(OC0), /* USB3 rear panel 1 */ + [1] = HERMES_USB2_CONFIG(OC0), + [2] = HERMES_USB2_CONFIG(OC1), /* USB3 rear panel 2 */ + [3] = HERMES_USB2_CONFIG(OC1), + [4] = HERMES_USB2_CONFIG(OC2), /* USB3 internal header CN_USB3_HDR */ + [5] = HERMES_USB2_CONFIG(OC2), + [6] = HERMES_USB2_CONFIG(OC3), /* USB2 internal header USB2_HDR1 */ + [7] = HERMES_USB2_CONFIG(OC3), + [8] = HERMES_USB2_CONFIG(OC4), /* USB2 internal header USB2_HDR1 */ + [9] = HERMES_USB2_CONFIG(OC4), + [10] = HERMES_USB2_CONFIG(OC_SKIP), /* BMC */ + [11] = USB2_PORT_EMPTY, + [12] = HERMES_USB2_CONFIG(OC_SKIP), /* piggy-back */ + [13] = HERMES_USB2_CONFIG(OC_SKIP), /* M.2 key E */ + }" + # USB Config 2.0/3.0 # Enumeration starts at 0 # USB 3.0 # USB OC0: RP1 register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" - register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # USB OC1: RP2 register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" - register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC1)" - register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC1)" # USB OC2: Internal Header CN_USB3_HDR register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)" - register "usb2_ports[4]" = "USB2_PORT_TYPE_C(OC2)" - register "usb2_ports[5]" = "USB2_PORT_TYPE_C(OC2)" - - # USB 2.0 - # USB OC3: Internal Header USB2_HDR1 - register "usb2_ports[6]" = "USB2_PORT_MID(OC3)" - register "usb2_ports[7]" = "USB2_PORT_MID(OC3)" - - # USB OC4: Internal Header USB2_HDR2 - register "usb2_ports[8]" = "USB2_PORT_MID(OC4)" - register "usb2_ports[9]" = "USB2_PORT_MID(OC4)" - - # USB OC5-7: not connected - # BMC - register "usb2_ports[10]" = "USB2_PORT_MID(OC_SKIP)" - # piggy-back - register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)" - # M2 key E - register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" # Thermal register "tcc_offset" = "1" # TCC of 99C |