#! /vendor/bin/sh

# Copyright (c) 2009-2016, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of The Linux Foundation nor
#       the names of its contributors may be used to endorse or promote
#       products derived from this software without specific prior written
#       permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

target=`getprop ro.board.platform`
low_ram=`getprop ro.config.low_ram`
if [ -f /sys/devices/soc0/soc_id ]; then
    platformid=`cat /sys/devices/soc0/soc_id`
else
    platformid=`cat /sys/devices/system/soc/soc0/id`
fi

start_msm_irqbalance_8939()
{
	if [ -f /vendor/bin/msm_irqbalance ]; then
		case "$platformid" in
		    "239" | "293" | "294" | "295" | "304" | "338" | "313" | "353" | "354")
			start vendor.msm_irqbalance;;
		esac
	fi
}

start_msm_irqbalance_msmnile()
{
         if [ -f /vendor/bin/msm_irqbalance ]; then
                start vendor.msm_irqbalance
         fi
}

start_msm_irqbalance_kona()
{
         if [ -f /vendor/bin/msm_irqbalance ]; then
                start vendor.msm_irqbalance
         fi
}

start_msm_irqbalance_lito()
{
         if [ -f /vendor/bin/msm_irqbalance ]; then
                start vendor.msm_irqbalance
         fi
}

start_msm_irqbalance_atoll()
{
         if [ -f /vendor/bin/msm_irqbalance ]; then
                start vendor.msm_irqbalance
         fi
}

start_msm_irqbalance660()
{
	if [ -f /vendor/bin/msm_irqbalance ]; then
		case "$platformid" in
		    "317" | "321" | "324" | "325" | "326" | "336" | "345" | "346" | "360" | "393")
			start vendor.msm_irqbalance;;
		    "318" | "327" | "385")
			start vendor.msm_irqbl_sdm630;;
		esac
	fi
}

start_msm_irqbalance()
{
	if [ -f /vendor/bin/msm_irqbalance ]; then
			start vendor.msm_irqbalance
	fi
}

baseband=`getprop ro.baseband`
echo 1 > /proc/sys/net/ipv6/conf/default/accept_ra_defrtr

case "$baseband" in
        "svlte2a")
        start bridgemgrd
        ;;
esac

case "$target" in
    "sdm660")
        if [ -f /sys/devices/soc0/soc_id ]; then
             soc_id=`cat /sys/devices/soc0/soc_id`
        else
             soc_id=`cat /sys/devices/system/soc/soc0/id`
        fi

        if [ -f /sys/devices/soc0/hw_platform ]; then
             hw_platform=`cat /sys/devices/soc0/hw_platform`
        else
             hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
        fi
        start_msm_irqbalance660
        ;;
    "msm8916")
        start_msm_irqbalance_8939
        if [ -f /sys/devices/soc0/soc_id ]; then
            soc_id=`cat /sys/devices/soc0/soc_id`
        else
            soc_id=`cat /sys/devices/system/soc/soc0/id`
        fi

        if [ -f /sys/devices/soc0/platform_subtype_id ]; then
             platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id`
        fi
        if [ -f /sys/devices/soc0/hw_platform ]; then
             hw_platform=`cat /sys/devices/soc0/hw_platform`
        fi
        case "$soc_id" in
             "239")
                  case "$hw_platform" in
                       "Surf")
                            case "$platform_subtype_id" in
                                 "1")
                                      setprop qemu.hw.mainkeys 0
                                      ;;
                            esac
                            ;;
                       "MTP")
                          case "$platform_subtype_id" in
                               "3")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                          esac
                          ;;
                  esac
                  ;;
        esac
        ;;
    "msm8994" | "msm8992" | "msm8998" | "apq8098_latv" | "sdm845" | "sdm710" | "qcs605" | "sm6150" | "trinket" | "bengal")
        start_msm_irqbalance
        ;;
    "msm8996")
        if [ -f /sys/devices/soc0/hw_platform ]; then
             hw_platform=`cat /sys/devices/soc0/hw_platform`
        fi
        case "$hw_platform" in
                "MTP" | "CDP")
                #Loop through the sysfs nodes and determine the correct sysfs to change the permission and ownership.
                        for count in 0 1 2 3 4 5 6 7 8 9 10
                        do
                                dir="/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input"$count
                                if [ -d "$dir" ]; then
                                     chmod 0660 $dir/secure_touch_enable
                                     chmod 0440 $dir/secure_touch
                                     chown system.drmrpc $dir/secure_touch_enable
                                     chown system.drmrpc $dir/secure_touch
                                     break
                                fi
                        done
                        ;;
        esac
        ;;
    "msmnile")
        start_msm_irqbalance_msmnile
        ;;
    "kona")
        start_msm_irqbalance_kona
        ;;
    "lito")
        start_msm_irqbalance_lito
        ;;
    "atoll")
        start_msm_irqbalance_atoll
        ;;
    "msm8937")
        start_msm_irqbalance_8939
        if [ -f /sys/devices/soc0/soc_id ]; then
            soc_id=`cat /sys/devices/soc0/soc_id`
        else
            soc_id=`cat /sys/devices/system/soc/soc0/id`
        fi

        if [ -f /sys/devices/soc0/hw_platform ]; then
             hw_platform=`cat /sys/devices/soc0/hw_platform`
        else
             hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
        fi
	if [ "$low_ram" != "true" ]; then
             case "$soc_id" in
                  "294" | "295" | "303" | "307" | "308" | "309" | "313" | "320" | "353" | "354" | "363" | "364")
                       case "$hw_platform" in
                            "Surf")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                            "MTP")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                            "RCM")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                            "QRD")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                       esac
                       ;;
             esac
        fi
        ;;
    "msm8953")
	start_msm_irqbalance_8939
        if [ -f /sys/devices/soc0/soc_id ]; then
            soc_id=`cat /sys/devices/soc0/soc_id`
        else
            soc_id=`cat /sys/devices/system/soc/soc0/id`
        fi

        if [ -f /sys/devices/soc0/hw_platform ]; then
             hw_platform=`cat /sys/devices/soc0/hw_platform`
        else
             hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
        fi
        case "$soc_id" in
             "293" | "304" | "338" | "351" | "349" | "350" )
                  case "$hw_platform" in
                       "Surf")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                       "MTP")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                       "RCM")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                       "QRD")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                  esac
                  ;;
       esac
        ;;
    "sdm710")
        if [ -f /sys/devices/soc0/soc_id ]; then
            soc_id=`cat /sys/devices/soc0/soc_id`
        else
            soc_id=`cat /sys/devices/system/soc/soc0/id`
        fi

        if [ -f /sys/devices/soc0/hw_platform ]; then
             hw_platform=`cat /sys/devices/soc0/hw_platform`
        else
             hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
        fi
        case "$soc_id" in
             "336" | "337" | "347" | "360" | "393" )
                  case "$hw_platform" in
                       "Surf")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                       "MTP")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                       "RCM")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                       "QRD")
                                    setprop qemu.hw.mainkeys 0
                                    ;;
                  esac
                  ;;
       esac
        ;;
esac

#
# Make modem config folder and copy firmware config to that folder for RIL
#
if [ -f /data/vendor/modem_config/ver_info.txt ]; then
    prev_version_info=`cat /data/vendor/modem_config/ver_info.txt`
else
    prev_version_info=""
fi

cur_version_info=`cat /vendor/firmware_mnt/verinfo/ver_info.txt`
if [ ! -f /vendor/firmware_mnt/verinfo/ver_info.txt -o "$prev_version_info" != "$cur_version_info" ]; then
    # add W for group recursively before delete
    chmod g+w -R /data/vendor/modem_config/*
    rm -rf /data/vendor/modem_config/*
    # preserve the read only mode for all subdir and files
    cp --preserve=m -dr /vendor/firmware_mnt/image/modem_pr/mcfg/configs/* /data/vendor/modem_config
    cp --preserve=m -d /vendor/firmware_mnt/verinfo/ver_info.txt /data/vendor/modem_config/
    cp --preserve=m -d /vendor/firmware_mnt/image/modem_pr/mbn_ota.txt /data/vendor/modem_config/
    # the group must be root, otherwise this script could not add "W" for group recursively
    chown -hR radio.root /data/vendor/modem_config/*
fi
chmod g-w /data/vendor/modem_config
setprop ro.vendor.ril.mbn_copy_completed 1

#check build variant for printk logging
#current default minimum boot-time-default
buildvariant=`getprop ro.build.type`
case "$buildvariant" in
    "userdebug" | "eng")
        #set default loglevel to KERN_INFO
        echo "6 6 1 7" > /proc/sys/kernel/printk
        ;;
    *)
        #set default loglevel to KERN_WARNING
        echo "4 4 1 4" > /proc/sys/kernel/printk
        ;;
esac