#! /vendor/bin/sh # Copyright (c) 2012-2013,2016,2018,2019 The Linux Foundation. All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # * Neither the name of The Linux Foundation nor # the names of its contributors may be used to endorse or promote # products derived from this software without specific prior written # permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND # NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR # CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # export PATH=/vendor/bin # Set platform variables if [ -f /sys/devices/soc0/hw_platform ]; then soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null else soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null fi if [ -f /sys/devices/soc0/soc_id ]; then soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null else soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null fi if [ -f /sys/devices/soc0/platform_version ]; then soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null else soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null fi if [ -f /sys/class/drm/card0-DSI-1/modes ]; then echo "detect" > /sys/class/drm/card0-DSI-1/status mode_file=/sys/class/drm/card0-DSI-1/modes while read line; do fb_width=${line%%x*}; break; done < $mode_file elif [ -f /sys/class/graphics/fb0/virtual_size ]; then res=`cat /sys/class/graphics/fb0/virtual_size` 2> /dev/null fb_width=${res%,*} fi log -t BOOT -p i "MSM target '$1', SoC '$soc_hwplatform', HwID '$soc_hwid', SoC ver '$soc_hwver'" #For drm based display driver vbfile=/sys/module/drm/parameters/vblankoffdelay if [ -w $vbfile ]; then echo -1 > $vbfile else log -t DRM_BOOT -p w "file: '$vbfile' or perms doesn't exist" fi function set_density_by_fb() { #put default density based on width if [ -z $fb_width ]; then setprop vendor.display.lcd_density 320 else if [ $fb_width -ge 1600 ]; then setprop vendor.display.lcd_density 640 elif [ $fb_width -ge 1440 ]; then setprop vendor.display.lcd_density 560 elif [ $fb_width -ge 1080 ]; then setprop vendor.display.lcd_density 480 elif [ $fb_width -ge 720 ]; then setprop vendor.display.lcd_density 320 #for 720X1280 resolution elif [ $fb_width -ge 480 ]; then setprop vendor.display.lcd_density 240 #for 480X854 QRD resolution else setprop vendor.display.lcd_density 160 fi fi } target=`getprop ro.board.platform` case "$target" in "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") case "$soc_hwplatform" in "FFA" | "SVLTE_FFA") # linking to surf_keypad_qwerty.kcm.bin instead of surf_keypad_numeric.kcm.bin so that # the UI keyboard works fine. ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin ;; "Fluid") setprop vendor.display.lcd_density 240 setprop qcom.bt.dev_power_class 2 ;; *) ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin ;; esac ;; "sm6150") case "$soc_hwplatform" in "ADP") setprop vendor.display.lcd_density 160 ;; esac case "$soc_hwid" in 365|366) sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null setprop vendor.media.target.version 1 if [ $sku_ver -eq 1 ]; then setprop vendor.media.target.version 2 fi ;; *) esac ;; "msm8660") case "$soc_hwplatform" in "Fluid") setprop vendor.display.lcd_density 240 ;; "Dragon") setprop ro.sound.alsa "WM8903" ;; esac ;; "msm8960") # lcd density is write-once. Hence the separate switch case case "$soc_hwplatform" in "Liquid") if [ "$soc_hwver" == "196608" ]; then # version 0x30000 is 3D sku setprop ro.sf.hwrotation 90 fi setprop vendor.display.lcd_density 160 ;; "MTP") setprop vendor.display.lcd_density 240 ;; *) case "$soc_hwid" in "109") setprop vendor.display.lcd_density 160 ;; *) setprop vendor.display.lcd_density 240 ;; esac ;; esac #Set up composition type based on the target case "$soc_hwid" in 87) #8960 setprop debug.composition.type dyn ;; 153|154|155|156|157|138) #8064 V2 PRIME | 8930AB | 8630AB | 8230AB | 8030AB | 8960AB setprop debug.composition.type c2d ;; *) esac ;; "msm8974") case "$soc_hwplatform" in "Liquid") setprop vendor.display.lcd_density 160 # Liquid do not have hardware navigation keys, so enable # Android sw navigation bar setprop ro.hw.nav_keys 0 ;; "Dragon") setprop vendor.display.lcd_density 240 ;; *) setprop vendor.display.lcd_density 320 ;; esac ;; "msm8226") case "$soc_hwplatform" in *) setprop vendor.display.lcd_density 320 ;; esac ;; "msm8610" | "apq8084" | "mpq8092") case "$soc_hwplatform" in *) setprop vendor.display.lcd_density 240 ;; esac ;; "apq8084") case "$soc_hwplatform" in "Liquid") setprop vendor.display.lcd_density 320 # Liquid do not have hardware navigation keys, so enable # Android sw navigation bar setprop ro.hw.nav_keys 0 ;; "SBC") setprop vendor.display.lcd_density 200 # SBC do not have hardware navigation keys, so enable # Android sw navigation bar setprop qemu.hw.mainkeys 0 ;; *) setprop vendor.display.lcd_density 480 ;; esac ;; "msm8996") case "$soc_hwplatform" in "Dragon") setprop vendor.display.lcd_density 240 setprop qemu.hw.mainkeys 0 ;; "ADP") setprop vendor.display.lcd_density 160 setprop qemu.hw.mainkeys 0 ;; "SBC") setprop vendor.display.lcd_density 240 setprop qemu.hw.mainkeys 0 ;; *) setprop vendor.display.lcd_density 560 ;; esac ;; "msm8937" | "msm8940") # Set vendor.opengles.version based on chip id. # MSM8937 and MSM8940 variants supports OpenGLES 3.1 # 196608 is decimal for 0x30000 to report version 3.0 # 196609 is decimal for 0x30001 to report version 3.1 # 196610 is decimal for 0x30002 to report version 3.2 case "$soc_hwid" in 294|295|296|297|298|313|353|354|363|364) setprop vendor.opengles.version 196610 if [ $soc_hwid = 354 ] then setprop vendor.media.target.version 1 log -t BOOT -p i "SDM429 early_boot prop set for: HwID '$soc_hwid'" fi ;; 303|307|308|309|320) # Vulkan is not supported for 8917 variants setprop vendor.opengles.version 196608 setprop persist.graphics.vulkan.disable true ;; *) setprop vendor.opengles.version 196608 ;; esac ;; "msm8909") case "$soc_hwplatform" in *) setprop persist.graphics.vulkan.disable true ;; esac ;; "msm8998" | "apq8098_latv") case "$soc_hwplatform" in *) setprop vendor.display.lcd_density 560 ;; esac ;; "sdm845") case "$soc_hwplatform" in *) if [ $fb_width -le 1600 ]; then setprop vendor.display.lcd_density 560 else setprop vendor.display.lcd_density 640 fi ;; esac ;; "msmnile") case "$soc_hwplatform" in *) if [ $fb_width -le 1600 ]; then setprop vendor.display.lcd_density 560 else setprop vendor.display.lcd_density 640 fi ;; esac ;; "kona") case "$soc_hwplatform" in *) if [ $fb_width -le 1600 ]; then setprop vendor.display.lcd_density 560 else setprop vendor.display.lcd_density 640 fi ;; esac ;; "lito") case "$soc_hwplatform" in *) sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null if [ $sku_ver -eq 1 ]; then setprop vendor.media.target.version 1 fi ;; esac ;; "sdm710" | "msmpeafowl") case "$soc_hwplatform" in *) sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null if [ $sku_ver -eq 1 ]; then setprop vendor.media.target.version 1 fi ;; esac ;; "msm8953") cap_ver = 1 if [ -e "/sys/devices/platform/soc/1d00000.qcom,vidc/capability_version" ]; then cap_ver=`cat /sys/devices/platform/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null else cap_ver=`cat /sys/devices/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null fi if [ $cap_ver -eq 1 ]; then setprop vendor.media.target.version 1 fi ;; #Set property to differentiate SDM660 & SDM455 #SOC ID for SDM455 is 385 "sdm660") case "$soc_hwid" in 385) setprop vendor.media.target.version 1 esac ;; esac baseband=`getprop ro.baseband` #enable atfwd daemon all targets except sda, apq, qcs case "$baseband" in "apq" | "sda" | "qcs" ) setprop persist.vendor.radio.atfwd.start false;; *) setprop persist.vendor.radio.atfwd.start true;; esac #set default lcd density #Since lcd density has read only #property, it will not overwrite previous set #property if any target is setting forcefully. set_density_by_fb # set Lilliput LCD density for ADP product=`getprop ro.build.product` case "$product" in "msmnile_au") setprop vendor.display.lcd_density 160 echo 902400000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/min_freq echo 1612800000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/max_freq echo 902400000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/min_freq echo 1612800000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/max_freq ;; *) ;; esac case "$product" in "sm6150_au") setprop vendor.display.lcd_density 160 ;; *) ;; esac case "$product" in "sdmshrike_au") setprop vendor.display.lcd_density 160 echo 940800000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/min_freq echo 940800000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/min_freq ;; *) ;; esac case "$product" in "msmnile_gvmq") setprop vendor.display.lcd_density 160 ;; *) ;; esac # Setup display nodes & permissions # HDMI can be fb1 or fb2 # Loop through the sysfs nodes and determine # the HDMI(dtv panel) function set_perms() { #Usage set_perms chown -h $2 $1 chmod $3 $1 } # check for the type of driver FB or DRM fb_driver=/sys/class/graphics/fb0 if [ -e "$fb_driver" ] then # check for mdp caps file=/sys/class/graphics/fb0/mdp/caps if [ -f "$file" ] then setprop vendor.gralloc.disable_ubwc 1 cat $file | while read line; do case "$line" in *"ubwc"*) setprop vendor.gralloc.enable_fb_ubwc 1 setprop vendor.gralloc.disable_ubwc 0 esac done fi else set_perms /sys/devices/virtual/hdcp/msm_hdcp/min_level_change system.graphics 0660 fi # allow system_graphics group to access pmic secure_mode node set_perms /sys/class/lcd_bias/secure_mode system.graphics 0660 set_perms /sys/class/leds/wled/secure_mode system.graphics 0660 boot_reason=`cat /proc/sys/kernel/boot_reason` reboot_reason=`getprop ro.boot.alarmboot` if [ "$boot_reason" = "3" ] || [ "$reboot_reason" = "true" ]; then setprop ro.vendor.alarm_boot true else setprop ro.vendor.alarm_boot false fi # copy GPU frequencies to vendor property if [ -f /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies ]; then gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies` 2> /dev/null setprop vendor.gpu.available_frequencies "$gpu_freq" fi