From 71ad0c9e5399aba0ac3cd20f1df41c9757cd6ca5 Mon Sep 17 00:00:00 2001 From: Isaac Chen Date: Fri, 13 Jul 2018 10:11:03 +0800 Subject: wayne: Initial bringup Change-Id: I211da5781d8c7a16199fd8a18e1b00cfc9e01944 Signed-off-by: Isaac Chen --- rootdir/Android.mk | 174 +- rootdir/bin/init.class_main.sh | 102 + rootdir/bin/init.crda.sh | 35 + rootdir/bin/init.mdm.sh | 34 + rootdir/bin/init.qcom.class_core.sh | 216 +++ rootdir/bin/init.qcom.coex.sh | 115 ++ rootdir/bin/init.qcom.crashdata.sh | 48 + rootdir/bin/init.qcom.early_boot.sh | 530 ++++++ rootdir/bin/init.qcom.efs.sync.sh | 35 + rootdir/bin/init.qcom.post_boot.sh | 3200 ++++++++++++++++++++++++++++++++ rootdir/bin/init.qcom.sdio.sh | 78 + rootdir/bin/init.qcom.sensors.sh | 43 + rootdir/bin/init.qcom.sh | 470 +++++ rootdir/bin/init.qcom.syspart_fixup.sh | 80 + rootdir/bin/init.qcom.usb.sh | 291 +++ rootdir/bin/init.qcom.wifi.sh | 505 +++++ rootdir/bin/init.qti.ims.sh | 57 + rootdir/bin/qca6234-service.sh | 87 + rootdir/etc/fstab.qcom | 9 +- rootdir/etc/init.msm.usb.configfs.rc | 863 +++++++++ rootdir/etc/init.qcom.rc | 1299 +++++++++++++ rootdir/etc/init.qcom.usb.rc | 1682 +++++++++++++++++ rootdir/etc/init.target.rc | 237 ++- rootdir/etc/recovery.fstab | 42 +- rootdir/etc/ueventd.qcom.rc | 302 +++ 25 files changed, 10486 insertions(+), 48 deletions(-) mode change 100755 => 100644 rootdir/Android.mk create mode 100755 rootdir/bin/init.class_main.sh create mode 100755 rootdir/bin/init.crda.sh create mode 100755 rootdir/bin/init.mdm.sh create mode 100755 rootdir/bin/init.qcom.class_core.sh create mode 100755 rootdir/bin/init.qcom.coex.sh create mode 100755 rootdir/bin/init.qcom.crashdata.sh create mode 100755 rootdir/bin/init.qcom.early_boot.sh create mode 100755 rootdir/bin/init.qcom.efs.sync.sh create mode 100755 rootdir/bin/init.qcom.post_boot.sh create mode 100755 rootdir/bin/init.qcom.sdio.sh create mode 100755 rootdir/bin/init.qcom.sensors.sh create mode 100755 rootdir/bin/init.qcom.sh create mode 100755 rootdir/bin/init.qcom.syspart_fixup.sh create mode 100755 rootdir/bin/init.qcom.usb.sh create mode 100755 rootdir/bin/init.qcom.wifi.sh create mode 100755 rootdir/bin/init.qti.ims.sh create mode 100755 rootdir/bin/qca6234-service.sh mode change 100755 => 100644 rootdir/etc/fstab.qcom create mode 100755 rootdir/etc/init.msm.usb.configfs.rc create mode 100755 rootdir/etc/init.qcom.rc create mode 100755 rootdir/etc/init.qcom.usb.rc mode change 100644 => 100755 rootdir/etc/init.target.rc create mode 100644 rootdir/etc/ueventd.qcom.rc (limited to 'rootdir') diff --git a/rootdir/Android.mk b/rootdir/Android.mk old mode 100755 new mode 100644 index 8b2d12a..1a5cb84 --- a/rootdir/Android.mk +++ b/rootdir/Android.mk @@ -4,17 +4,171 @@ include $(CLEAR_VARS) # files that live under device/qcom/common/rootdir/etc/ include $(CLEAR_VARS) -LOCAL_MODULE := init.target.rc -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := etc/init.target.rc -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC)/init/hw +LOCAL_MODULE := init.qcom.early_boot.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.early_boot.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) include $(BUILD_PREBUILT) include $(CLEAR_VARS) -LOCAL_MODULE := fstab.qcom -LOCAL_MODULE_TAGS := optional eng -LOCAL_MODULE_CLASS := ETC -LOCAL_SRC_FILES := etc/fstab.qcom -LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC) +LOCAL_MODULE := init.qcom.class_core.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.class_core.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.coex.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.coex.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.crashdata.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.crashdata.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.efs.sync.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.efs.sync.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.sdio.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.sdio.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.syspart_fixup.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.syspart_fixup.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.wifi.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.wifi.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := qca6234-service.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/qca6234-service.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.post_boot.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.post_boot.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qti.ims.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qti.ims.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.rc +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := etc/init.qcom.rc +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC)/init/hw +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.class_main.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.class_main.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.usb.rc +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := etc/init.qcom.usb.rc +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC)/init/hw +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.msm.usb.configfs.rc +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := etc/init.msm.usb.configfs.rc +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC)/init/hw +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.usb.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.usb.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := ueventd.qcom.rc +LOCAL_MODULE_STEM := ueventd.rc +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := etc/ueventd.qcom.rc +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.qcom.sensors.sh +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := bin/init.qcom.sensors.sh +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_EXECUTABLES) +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := init.target.rc +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := etc/init.target.rc +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC)/init/hw +include $(BUILD_PREBUILT) + +include $(CLEAR_VARS) +LOCAL_MODULE := fstab.qcom +LOCAL_MODULE_TAGS := optional eng +LOCAL_MODULE_CLASS := ETC +LOCAL_SRC_FILES := etc/fstab.qcom +LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_ETC) include $(BUILD_PREBUILT) diff --git a/rootdir/bin/init.class_main.sh b/rootdir/bin/init.class_main.sh new file mode 100755 index 0000000..9fce445 --- /dev/null +++ b/rootdir/bin/init.class_main.sh @@ -0,0 +1,102 @@ +#! /vendor/bin/sh + +# Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +# +# start ril-daemon only for targets on which radio is present +# +baseband=`getprop ro.baseband` +sgltecsfb=`getprop persist.vendor.radio.sglte_csfb` +datamode=`getprop persist.data.mode` + +case "$baseband" in + "apq" | "sda" ) + setprop ro.radio.noril yes + stop ril-daemon +esac + +case "$baseband" in + "msm" | "csfb" | "svlte2a" | "mdm" | "mdm2" | "sglte" | "sglte2" | "dsda2" | "unknown" | "dsda3") + start qmuxd +esac + +case "$baseband" in + "msm" | "csfb" | "svlte2a" | "mdm" | "mdm2" | "sglte" | "sglte2" | "dsda2" | "unknown" | "dsda3" | "sdm" | "sdx") + start ipacm-diag + start ipacm + case "$baseband" in + "svlte2a" | "csfb") + start qmiproxy + ;; + "sglte" | "sglte2" ) + if [ "x$sgltecsfb" != "xtrue" ]; then + start qmiproxy + else + setprop persist.vendor.radio.voice.modem.index 0 + fi + ;; + "dsda2") + setprop persist.radio.multisim.config dsda + esac + + multisim=`getprop persist.radio.multisim.config` + + if [ "$multisim" = "dsds" ] || [ "$multisim" = "dsda" ]; then + start ril-daemon2 + elif [ "$multisim" = "tsts" ]; then + start ril-daemon2 + start ril-daemon3 + fi + + case "$datamode" in + "tethered") + start qti + start port-bridge + ;; + "concurrent") + start qti + start netmgrd + start port-bridge + ;; + *) + start netmgrd + ;; + esac +esac + +# +# Allow persistent faking of bms +# User needs to set fake bms charge in persist.bms.fake_batt_capacity +# +fake_batt_capacity=`getprop persist.bms.fake_batt_capacity` +case "$fake_batt_capacity" in + "") ;; #Do nothing here + * ) + echo "$fake_batt_capacity" > /sys/class/power_supply/battery/capacity + ;; +esac diff --git a/rootdir/bin/init.crda.sh b/rootdir/bin/init.crda.sh new file mode 100755 index 0000000..4264789 --- /dev/null +++ b/rootdir/bin/init.crda.sh @@ -0,0 +1,35 @@ +#! /vendor/bin/sh + +# Copyright (c) 2012, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +country=`getprop wlan.crda.country` +# crda takes input in COUNTRY environment variable +if [ $country != "" ] +then +COUNTRY="$country" /system/bin/crda +fi diff --git a/rootdir/bin/init.mdm.sh b/rootdir/bin/init.mdm.sh new file mode 100755 index 0000000..840c8cd --- /dev/null +++ b/rootdir/bin/init.mdm.sh @@ -0,0 +1,34 @@ +#! /vendor/bin/sh + +# Copyright (c) 2013, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +baseband=`getprop ro.baseband` +if [ "$baseband" = "mdm" ] || [ "$baseband" = "mdm2" ]; then + start mdm_helper +fi + diff --git a/rootdir/bin/init.qcom.class_core.sh b/rootdir/bin/init.qcom.class_core.sh new file mode 100755 index 0000000..8f8265d --- /dev/null +++ b/rootdir/bin/init.qcom.class_core.sh @@ -0,0 +1,216 @@ +#!/vendor/bin/sh + +# Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +# Set platform variables +target=`getprop ro.board.platform` +if [ -f /sys/devices/soc0/hw_platform ]; then + soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null +else + soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null +fi +if [ -f /sys/devices/soc0/soc_id ]; then + soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null +else + soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null +fi +if [ -f /sys/devices/soc0/platform_version ]; then + soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null +else + soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null +fi + + +# Dynamic Memory Managment (DMM) provides a sys file system to the userspace +# that can be used to plug in/out memory that has been configured as unstable. +# This unstable memory can be in Active or In-Active State. +# Each of which the userspace can request by writing to a sys file. +# +# ro.dev.dmm = 1; Indicates that DMM is enabled in the Android User Space. This +# property is set in the Android system properties file. +# +# If ro.dev.dmm.dpd.start_address is set here then the target has a memory +# configuration that supports DynamicMemoryManagement. +init_DMM() +{ + block=-1 + + case "$target" in + "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "msm8960") + ;; + *) + return + ;; + esac + + mem="/sys/devices/system/memory" + op=`cat $mem/movable_start_bytes` + case "$op" in + "0") + log -p i -t DMM DMM Disabled. movable_start_bytes not set: $op + ;; + + "$mem/movable_start_bytes: No such file or directory ") + log -p i -t DMM DMM Disabled. movable_start_bytes does not exist: $op + ;; + + *) + log -p i -t DMM DMM available. movable_start_bytes at $op + movable_start_bytes=0x`cat $mem/movable_start_bytes` + block_size_bytes=0x`cat $mem/block_size_bytes` + block=$((#${movable_start_bytes}/${block_size_bytes})) + + chown -h system.system $mem/memory$block/state + chown -h system.system $mem/probe + chown -h system.system $mem/active + chown -h system.system $mem/remove + + case "$target" in + "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") + echo $movable_start_bytes > $mem/probe + case "$?" in + "0") + log -p i -t DMM $movable_start_bytes to physical hotplug succeeded. + ;; + *) + log -p e -t DMM $movable_start_bytes to physical hotplug failed. + return + ;; + esac + + echo online > $mem/memory$block/state + case "$?" in + "0") + log -p i -t DMM \'echo online\' to logical hotplug succeeded. + ;; + *) + log -p e -t DMM \'echo online\' to logical hotplug failed. + return + ;; + esac + ;; + esac + + setprop ro.dev.dmm.dpd.start_address $movable_start_bytes + setprop ro.dev.dmm.dpd.block $block + ;; + esac + + case "$target" in + "msm8960") + return + ;; + esac + + # For 7X30 targets: + # ro.dev.dmm.dpd.start_address is set when the target has a 2x256Mb memory + # configuration. This is also used to indicate that the target is capable of + # setting EBI-1 to Deep Power Down or Self Refresh. + op=`cat $mem/low_power_memory_start_bytes` + case "$op" in + "0") + log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes not set:$op + ;; + "$mem/low_power_memory_start_bytes No such file or directory ") + log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes does not exist:$op + ;; + *) + log -p i -t DMM Self-Refresh-Only available. low_power_memory_start_bytes at $op + ;; + esac +} + +# +# For controlling console and shell on console on 8960 - perist.serial.enable 8960 +# On other target use default ro.debuggable property. +# +serial=`getprop persist.serial.enable` +dserial=`getprop ro.debuggable` +case "$target" in + "msm8960") + case "$serial" in + "0") + echo 0 > /sys/devices/platform/msm_serial_hsl.0/console + ;; + "1") + echo 1 > /sys/devices/platform/msm_serial_hsl.0/console + start console + ;; + *) + case "$dserial" in + "1") + start console + ;; + esac + ;; + esac + ;; + + "msm8610" | "msm8974" | "msm8226") + case "$serial" in + "0") + echo 0 > /sys/devices/f991f000.serial/console + ;; + "1") + echo 1 > /sys/devices/f991f000.serial/console + start console + ;; + *) + case "$dserial" in + "1") + start console + ;; + esac + ;; + esac + ;; + *) + case "$dserial" in + "1") + start console + ;; + esac + ;; +esac + +case "$target" in + "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") + insmod /system/lib/modules/ss_mfcinit.ko + insmod /system/lib/modules/ss_vencoder.ko + insmod /system/lib/modules/ss_vdecoder.ko + chmod -h 0666 /dev/ss_mfc_reg + chmod -h 0666 /dev/ss_vdec + chmod -h 0666 /dev/ss_venc + + init_DMM + ;; + + "msm8960") + init_DMM + ;; +esac diff --git a/rootdir/bin/init.qcom.coex.sh b/rootdir/bin/init.qcom.coex.sh new file mode 100755 index 0000000..a9a22f1 --- /dev/null +++ b/rootdir/bin/init.qcom.coex.sh @@ -0,0 +1,115 @@ +#! /vendor/bin/sh + +# Copyright (c) 2009-2010, 2012, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +LOG_TAG="qcom-bt-wlan-coex" +LOG_NAME="${0}:" + +coex_pid="" +ath_wlan_supported=`getprop wlan.driver.ath` + +loge () +{ + /system/bin/log -t $LOG_TAG -p e "$LOG_NAME $@" +} + +logi () +{ + /system/bin/log -t $LOG_TAG -p i "$LOG_NAME $@" +} + +failed () +{ + loge "$1: exit code $2" + exit $2 +} + +start_coex () +{ + case "$ath_wlan_supported" in + "2") + echo "ATH WLAN Chip ID AR6004 is enabled" + /system/bin/abtfilt -d -z -n -m -a -w wlan0 & + ;; + "1") + echo "ATH WLAN Chip ID is enabled" + # Must have -d -z -n -v -s -w wlan0 parameters for atheros btfilter. + /system/bin/abtfilt -d -z -n -v -q -s -w wlan0 & + ;; + "0") + echo "WCN WLAN Chip ID is enabled" + # Must have -o turned on to avoid daemon (otherwise we cannot get pid) + /system/bin/btwlancoex -o $opt_flags & + ;; + *) + echo "NO WLAN Chip ID is enabled, so enabling ATH as default" + # Must have -d -z -n -v -s -w wlan0 parameters for atheros btfilter. + /system/bin/abtfilt -d -z -n -v -q -s -w wlan0 & + ;; + esac + coex_pid=$! + logi "start_coex: pid = $coex_pid" +} + +kill_coex () +{ + logi "kill_coex: pid = $coex_pid" + kill -TERM $coex_pid + # this shell doesn't exit now -- wait returns for normal exit +} + +# mimic coex options parsing -- maybe a waste of effort +USAGE="${0} [-o] [-c] [-r] [-i] [-h]" + +while getopts "ocrih" f +do + case $f in + o | c | r | i | h) opt_flags="$opt_flags -$f" ;; + \?) echo $USAGE; exit 1;; + esac +done + +# init does SIGTERM on ctl.stop for service +trap "kill_coex" TERM INT + +#Selectively start coex module +target=`getprop ro.board.platform` + +if [ "$target" == "msm8960" ] && [ "$ath_wlan_supported" != "2" ]; then + logi "btwlancoex/abtfilt is not needed" +else + # Build settings may not produce the coex executable + if ls /system/bin/btwlancoex || ls /system/bin/abtfilt + then + start_coex + wait $coex_pid + logi "Coex stopped" + else + logi "btwlancoex/abtfilt not available" + fi +fi +exit 0 diff --git a/rootdir/bin/init.qcom.crashdata.sh b/rootdir/bin/init.qcom.crashdata.sh new file mode 100755 index 0000000..59cf68d --- /dev/null +++ b/rootdir/bin/init.qcom.crashdata.sh @@ -0,0 +1,48 @@ +#!/vendor/bin/sh +# Copyright (c) 2017, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of The Linux Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +abnormalcnt="persist.vendor.crash.cnt" + +abnormal_cnt=`getprop $abnormalcnt` +crash_detect=`getprop persist.vendor.crash.detect` + +if [ "$abnormal_cnt" = "" ] +then +setprop $abnormalcnt 0 +fi + +if [ "$crash_detect" = "true" ] +then +abnormal_cnt=`expr $abnormal_cnt + 1` +setprop $abnormalcnt $abnormal_cnt +elif [ "$crash_detect" = "false" ];then +setprop persist.vendor.crash.detect true +else +setprop persist.vendor.crash.detect true +fi diff --git a/rootdir/bin/init.qcom.early_boot.sh b/rootdir/bin/init.qcom.early_boot.sh new file mode 100755 index 0000000..b037c8d --- /dev/null +++ b/rootdir/bin/init.qcom.early_boot.sh @@ -0,0 +1,530 @@ +#! /vendor/bin/sh + +# Copyright (c) 2012-2013,2016 The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +export PATH=/vendor/bin + +# Set platform variables +if [ -f /sys/devices/soc0/hw_platform ]; then + soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null +else + soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null +fi +if [ -f /sys/devices/soc0/soc_id ]; then + soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null +else + soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null +fi +if [ -f /sys/devices/soc0/platform_version ]; then + soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null +else + soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null +fi + +if [ -f /sys/class/graphics/fb0/virtual_size ]; then + res=`cat /sys/class/graphics/fb0/virtual_size` 2> /dev/null + fb_width=${res%,*} +fi + +log -t BOOT -p i "MSM target '$1', SoC '$soc_hwplatform', HwID '$soc_hwid', SoC ver '$soc_hwver'" + +#For drm based display driver +vbfile=/sys/module/drm/parameters/vblankoffdelay +if [ -w $vbfile ]; then + echo -1 > $vbfile +else + log -t DRM_BOOT -p w "file: '$vbfile' or perms doesn't exist" +fi + +function set_density_by_fb() { + #put default density based on width + if [ -z $fb_width ]; then + setprop ro.sf.lcd_density 320 + else + if [ $fb_width -ge 1440 ]; then + setprop ro.sf.lcd_density 560 + elif [ $fb_width -ge 1080 ]; then + setprop ro.sf.lcd_density 480 + elif [ $fb_width -ge 720 ]; then + setprop ro.sf.lcd_density 320 #for 720X1280 resolution + elif [ $fb_width -ge 480 ]; then + setprop ro.sf.lcd_density 240 #for 480X854 QRD resolution + else + setprop ro.sf.lcd_density 160 + fi + fi +} +target=`getprop ro.board.platform` +case "$target" in + "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") + case "$soc_hwplatform" in + "FFA" | "SVLTE_FFA") + # linking to surf_keypad_qwerty.kcm.bin instead of surf_keypad_numeric.kcm.bin so that + # the UI keyboard works fine. + ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin + ;; + "Fluid") + setprop ro.sf.lcd_density 240 + setprop qcom.bt.dev_power_class 2 + ;; + *) + ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin + ;; + esac + ;; + + "msm8660") + case "$soc_hwplatform" in + "Fluid") + setprop ro.sf.lcd_density 240 + ;; + "Dragon") + setprop ro.sound.alsa "WM8903" + ;; + esac + ;; + + "msm8960") + # lcd density is write-once. Hence the separate switch case + case "$soc_hwplatform" in + "Liquid") + if [ "$soc_hwver" == "196608" ]; then # version 0x30000 is 3D sku + setprop ro.sf.hwrotation 90 + fi + + setprop ro.sf.lcd_density 160 + ;; + "MTP") + setprop ro.sf.lcd_density 240 + ;; + *) + case "$soc_hwid" in + "109") + setprop ro.sf.lcd_density 160 + ;; + *) + setprop ro.sf.lcd_density 240 + ;; + esac + ;; + esac + + #Set up composition type based on the target + case "$soc_hwid" in + 87) + #8960 + setprop debug.composition.type dyn + ;; + 153|154|155|156|157|138) + #8064 V2 PRIME | 8930AB | 8630AB | 8230AB | 8030AB | 8960AB + setprop debug.composition.type c2d + ;; + *) + esac + ;; + + "msm8974") + case "$soc_hwplatform" in + "Liquid") + setprop ro.sf.lcd_density 160 + # Liquid do not have hardware navigation keys, so enable + # Android sw navigation bar + setprop ro.hw.nav_keys 0 + ;; + "Dragon") + setprop ro.sf.lcd_density 240 + ;; + *) + setprop ro.sf.lcd_density 320 + ;; + esac + ;; + + "msm8226") + case "$soc_hwplatform" in + *) + setprop ro.sf.lcd_density 320 + ;; + esac + ;; + + "msm8610" | "apq8084" | "mpq8092") + case "$soc_hwplatform" in + *) + setprop ro.sf.lcd_density 240 + ;; + esac + ;; + "apq8084") + case "$soc_hwplatform" in + "Liquid") + setprop ro.sf.lcd_density 320 + # Liquid do not have hardware navigation keys, so enable + # Android sw navigation bar + setprop ro.hw.nav_keys 0 + ;; + "SBC") + setprop ro.sf.lcd_density 200 + # SBC do not have hardware navigation keys, so enable + # Android sw navigation bar + setprop qemu.hw.mainkeys 0 + ;; + *) + setprop ro.sf.lcd_density 480 + ;; + esac + ;; + "msm8996") + case "$soc_hwplatform" in + "Dragon") + setprop ro.sf.lcd_density 240 + setprop qemu.hw.mainkeys 0 + ;; + "ADP") + setprop ro.sf.lcd_density 160 + setprop qemu.hw.mainkeys 0 + ;; + "SBC") + setprop ro.sf.lcd_density 240 + setprop qemu.hw.mainkeys 0 + ;; + *) + setprop ro.sf.lcd_density 560 + ;; + esac + ;; + "msm8937" | "msm8940") + # Set ro.opengles.version based on chip id. + # MSM8937 and MSM8940 variants supports OpenGLES 3.1 + # 196608 is decimal for 0x30000 to report version 3.0 + # 196609 is decimal for 0x30001 to report version 3.1 + # 196610 is decimal for 0x30002 to report version 3.2 + case "$soc_hwid" in + 294|295|296|297|298|313) + setprop ro.opengles.version 196610 + ;; + 303|307|308|309|320) + # Vulkan is not supported for 8917 variants + setprop ro.opengles.version 196608 + setprop persist.graphics.vulkan.disable true + ;; + *) + setprop ro.opengles.version 196608 + ;; + esac + ;; + "msm8909") + case "$soc_hwplatform" in + *) + setprop persist.graphics.vulkan.disable true + ;; + esac + ;; + "msm8998" | "apq8098_latv") + case "$soc_hwplatform" in + *) + setprop ro.sf.lcd_density 560 + if [ ! -e /dev/kgsl-3d0 ]; then + setprop persist.sys.force_sw_gles 1 + setprop sdm.idle_time 0 + else + setprop persist.sys.force_sw_gles 0 + fi + ;; + esac + case "$soc_hwid" in + "319") #apq8098_latv + echo "\n==Loading ALX module==\n" + insmod /system/lib/modules/alx.ko + ;; + esac + ;; + "sdm845") + case "$soc_hwplatform" in + *) + setprop ro.sf.lcd_density 560 + if [ ! -e /dev/kgsl-3d0 ]; then + setprop persist.sys.force_sw_gles 1 + setprop sdm.idle_time 0 + else + setprop persist.sys.force_sw_gles 0 + fi + ;; + esac + ;; + "msm8953") + cap_ver=`cat /sys/devices/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null + if [ $cap_ver -eq 1 ]; then + setprop media.msm8953.version 1 + fi + ;; + "msm8952") + case "$soc_hwid" in + 278) + setprop media.msm8956hw 1 + if [ -f /sys/devices/soc0/platform_version ]; then + hw_ver=`cat /sys/devices/soc.0/1d00000.qcom,vidc/version` 2> /dev/null + if [ $hw_ver -eq 1 ]; then + setprop media.msm8956.version 1 + fi + fi + ;; + 266|277) + setprop media.msm8956hw 1 + if [ -f /sys/devices/soc0/platform_version ]; then + hw_ver=`cat /sys/devices/soc.0/1d00000.qcom,vidc/version` 2> /dev/null + if [ $hw_ver -eq 1 ]; then + setprop media.msm8956.version 1 + fi + fi + ;; + 264) + setprop persist.graphics.vulkan.disable true + ;; + esac + ;; +esac + +# In mpss AT version is greater than 3.1, need +# to use the new vendor-ril which supports L+L feature +# otherwise use the existing old one. +if [ -f /firmware/verinfo/ver_info.txt ]; then + modem=`cat /firmware/verinfo/ver_info.txt | + sed -n 's/^[^:]*modem[^:]*:[[:blank:]]*//p' | + sed 's/.*AT.\(.*\)/\1/g' | cut -d \- -f 1` + zygote=`getprop ro.zygote` + case "$zygote" in + "zygote64_32") + if [ "$modem" \< "3.1" ]; then + setprop vendor.rild.libpath "/vendor/lib64/libril-qc-qmi-1.so" + else + setprop vendor.rild.libpath "/vendor/lib64/libril-qc-hal-qmi.so" + fi + ;; + "zygote32") + if [ "$modem" \< "3.1" ]; then + setprop vendor.rild.libpath "/vendor/lib/libril-qc-qmi-1.so" + else + setprop vendor.rild.libpath "/vendor/lib/libril-qc-hal-qmi.so" + fi + ;; + esac +fi + +if [ -f /firmware/verinfo/ver_info.txt ]; then + # In mpss AT version is greater than 3.1, need + # to use the new vendor-ril which supports L+L feature + # otherwise use the existing old one. + modem=`cat /firmware/verinfo/ver_info.txt | + sed -n 's/^[^:]*modem[^:]*:[[:blank:]]*//p' | + sed 's/.*MPSS.\(.*\)/\1/g' | cut -d \. -f 1` + if [ "$modem" = "AT" ]; then + version=`cat /firmware/verinfo/ver_info.txt | + sed -n 's/^[^:]*modem[^:]*:[[:blank:]]*//p' | + sed 's/.*AT.\(.*\)/\1/g' | cut -d \- -f 1` + if [ ! -z $version ]; then + zygote=`getprop ro.zygote` + case "$zygote" in + "zygote64_32") + if [ "$version" \< "3.1" ]; then + setprop vendor.rild.libpath "/vendor/lib64/libril-qc-qmi-1.so" + else + setprop vendor.rild.libpath "/vendor/lib64/libril-qc-hal-qmi.so" + fi + ;; + "zygote32") + if [ "$version" \< "3.1" ]; then + echo "legacy qmi load for TA less than 3.1" + setprop vendor.rild.libpath "/vendor/lib/libril-qc-qmi-1.so" + else + setprop vendor.rild.libpath "/vendor/lib/libril-qc-hal-qmi.so" + fi + ;; + esac + fi + # In mpss TA version is greater than 3.0, need + # to use the new vendor-ril which supports L+L feature + # otherwise use the existing old one. + elif [ "$modem" = "TA" ]; then + version=`cat /firmware/verinfo/ver_info.txt | + sed -n 's/^[^:]*modem[^:]*:[[:blank:]]*//p' | + sed 's/.*TA.\(.*\)/\1/g' | cut -d \- -f 1` + if [ ! -z $version ]; then + zygote=`getprop ro.zygote` + case "$zygote" in + "zygote64_32") + if [ "$version" \< "3.0" ]; then + setprop vendor.rild.libpath "/vendor/lib64/libril-qc-qmi-1.so" + else + setprop vendor.rild.libpath "/vendor/lib64/libril-qc-hal-qmi.so" + fi + ;; + "zygote32") + if [ "$version" \< "3.0" ]; then + setprop vendor.rild.libpath "/vendor/lib/libril-qc-qmi-1.so" + else + setprop vendor.rild.libpath "/vendor/lib/libril-qc-hal-qmi.so" + fi + ;; + esac + fi + fi; +fi + +baseband=`getprop ro.baseband` +#enable atfwd daemon all targets except sda, apq, qcs +case "$baseband" in + "apq" | "sda" | "qcs" ) + setprop persist.radio.atfwd.start false;; + *) + setprop persist.radio.atfwd.start true;; +esac + +#set default lcd density +#Since lcd density has read only +#property, it will not overwrite previous set +#property if any target is setting forcefully. +set_density_by_fb + +# Setup display nodes & permissions +# HDMI can be fb1 or fb2 +# Loop through the sysfs nodes and determine +# the HDMI(dtv panel) + +function set_perms() { + #Usage set_perms + chown -h $2 $1 + chmod $3 $1 +} + +function setHDMIPermission() { + file=/sys/class/graphics/fb$1 + dev_file=/dev/graphics/fb$1 + dev_gfx_hdmi=/devices/virtual/switch/hdmi + + set_perms $file/hpd system.graphics 0664 + set_perms $file/res_info system.graphics 0664 + set_perms $file/vendor_name system.graphics 0664 + set_perms $file/product_description system.graphics 0664 + set_perms $file/video_mode system.graphics 0664 + set_perms $file/format_3d system.graphics 0664 + set_perms $file/s3d_mode system.graphics 0664 + set_perms $file/dynamic_fps system.graphics 0664 + set_perms $file/msm_fb_dfps_mode system.graphics 0664 + set_perms $file/hdr_stream system.graphics 0664 + set_perms $file/cec/enable system.graphics 0664 + set_perms $file/cec/logical_addr system.graphics 0664 + set_perms $file/cec/rd_msg system.graphics 0664 + set_perms $file/pa system.graphics 0664 + set_perms $file/cec/wr_msg system.graphics 0600 + set_perms $file/hdcp/tp system.graphics 0664 + set_perms $file/hdmi_audio_cb audioserver.audio 0600 + set_perms $file/pll_enable system.graphics 0664 + set_perms $file/hdmi_ppm system.graphics 0664 + + ln -s $dev_file $dev_gfx_hdmi +} + +# check for the type of driver FB or DRM +fb_driver=/sys/class/graphics/fb0 +if [ -e "$fb_driver" ] +then + # check for HDMI connection + for fb_cnt in 0 1 2 3 + do + file=/sys/class/graphics/fb$fb_cnt/msm_fb_panel_info + if [ -f "$file" ] + then + cat $file | while read line; do + case "$line" in + *"is_pluggable"*) + case "$line" in + *"1"*) + setHDMIPermission $fb_cnt + esac + esac + done + fi + done + + # check for mdp caps + file=/sys/class/graphics/fb0/mdp/caps + if [ -f "$file" ] + then + setprop debug.gralloc.gfx_ubwc_disable 1 + cat $file | while read line; do + case "$line" in + *"ubwc"*) + setprop debug.gralloc.enable_fb_ubwc 1 + setprop debug.gralloc.gfx_ubwc_disable 0 + esac + done + fi + + file=/sys/class/graphics/fb0 + if [ -d "$file" ] + then + set_perms $file/idle_time system.graphics 0664 + set_perms $file/dynamic_fps system.graphics 0664 + set_perms $file/dyn_pu system.graphics 0664 + set_perms $file/modes system.graphics 0664 + set_perms $file/mode system.graphics 0664 + set_perms $file/msm_cmd_autorefresh_en system.graphics 0664 + fi + + # set lineptr permissions for all displays + for fb_cnt in 0 1 2 3 + do + file=/sys/class/graphics/fb$fb_cnt + if [ -f "$file/lineptr_value" ]; then + set_perms $file/lineptr_value system.graphics 0664 + fi + if [ -f "$file/msm_fb_persist_mode" ]; then + set_perms $file/msm_fb_persist_mode system.graphics 0664 + fi + done +fi + +boot_reason=`cat /proc/sys/kernel/boot_reason` +reboot_reason=`getprop ro.boot.alarmboot` +power_off_alarm_file=`cat /persist/alarm/powerOffAlarmSet` +if [ "$boot_reason" = "3" ] || [ "$reboot_reason" = "true" ]; then + if [ "$power_off_alarm_file" = "1" ] + then + setprop ro.alarm_boot true + setprop debug.sf.nobootanimation 1 + fi +else + setprop ro.alarm_boot false +fi + +# copy GPU frequencies to system property +if [ -f /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies ]; then + gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies` 2> /dev/null + setprop ro.gpu.available_frequencies "$gpu_freq" +fi diff --git a/rootdir/bin/init.qcom.efs.sync.sh b/rootdir/bin/init.qcom.efs.sync.sh new file mode 100755 index 0000000..5e7bfa1 --- /dev/null +++ b/rootdir/bin/init.qcom.efs.sync.sh @@ -0,0 +1,35 @@ +#! /vendor/bin/sh + +# Copyright (c) 2012, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of The Linux Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# + +PATH=/system/bin:$PATH +export PATH +cat /sys/devices/platform/rs300000a7.65536/force_sync +cat /sys/devices/platform/rs300100a7.65536/force_sync diff --git a/rootdir/bin/init.qcom.post_boot.sh b/rootdir/bin/init.qcom.post_boot.sh new file mode 100755 index 0000000..1d6b55a --- /dev/null +++ b/rootdir/bin/init.qcom.post_boot.sh @@ -0,0 +1,3200 @@ +#! /vendor/bin/sh + +# Copyright (c) 2012-2013, 2016-2017, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +target=`getprop ro.board.platform` + +function configure_zram_parameters() { + MemTotalStr=`cat /proc/meminfo | grep MemTotal` + MemTotal=${MemTotalStr:16:8} + + low_ram=`getprop ro.config.low_ram` + + # Zram disk - 75% for Go devices. + # For 512MB Go device, size = 384MB + # For 1GB Go device, size = 768MB + # Others - 512MB size + # And enable lz4 zram compression for Go devices + zram_enable=`getprop ro.vendor.qti.config.zram` + if [ "$zram_enable" == "true" ]; then + if [ $MemTotal -le 524288 ] && [ "$low_ram" == "true" ]; then + echo lz4 > /sys/block/zram0/comp_algorithm + echo 402653184 > /sys/block/zram0/disksize + elif [ $MemTotal -le 1048576 ] && [ "$low_ram" == "true" ]; then + echo lz4 > /sys/block/zram0/comp_algorithm + echo 805306368 > /sys/block/zram0/disksize + else + echo 536870912 > /sys/block/zram0/disksize + fi + mkswap /dev/block/zram0 + swapon /dev/block/zram0 -p 32758 + fi +} + +function configure_memory_parameters() { + # Set Memory paremeters. + # + # Set per_process_reclaim tuning parameters + # 2GB 64-bit will have aggressive settings when compared to 1GB 32-bit + # 1GB and less will use vmpressure range 50-70, 2GB will use 10-70 + # 1GB and less will use 512 pages swap size, 2GB will use 1024 + # + # Set Low memory killer minfree parameters + # 32 bit all memory configurations will use 15K series + # 64 bit up to 2GB with use 14K, and above 2GB will use 18K + # + # Set ALMK parameters (usually above the highest minfree values) + # 32 bit will have 53K & 64 bit will have 81K + # + +ProductName=`getprop ro.product.name` +low_ram=`getprop ro.config.low_ram` + +if [ "$ProductName" == "msm8996" ]; then + # Enable Adaptive LMK + echo 1 > /sys/module/lowmemorykiller/parameters/enable_adaptive_lmk + echo 81250 > /sys/module/lowmemorykiller/parameters/vmpressure_file_min + + configure_zram_parameters +else + arch_type=`uname -m` + MemTotalStr=`cat /proc/meminfo | grep MemTotal` + MemTotal=${MemTotalStr:16:8} + + # Read adj series and set adj threshold for PPR and ALMK. + # This is required since adj values change from framework to framework. + adj_series=`cat /sys/module/lowmemorykiller/parameters/adj` + adj_1="${adj_series#*,}" + set_almk_ppr_adj="${adj_1%%,*}" + + # PPR and ALMK should not act on HOME adj and below. + # Normalized ADJ for HOME is 6. Hence multiply by 6 + # ADJ score represented as INT in LMK params, actual score can be in decimal + # Hence add 6 considering a worst case of 0.9 conversion to INT (0.9*6). + # For uLMK + Memcg, this will be set as 6 since adj is zero. + set_almk_ppr_adj=$(((set_almk_ppr_adj * 6) + 6)) + echo $set_almk_ppr_adj > /sys/module/lowmemorykiller/parameters/adj_max_shift + echo $set_almk_ppr_adj > /sys/module/process_reclaim/parameters/min_score_adj + + #Set other memory parameters + echo 0 > /sys/module/process_reclaim/parameters/enable_process_reclaim + echo 70 > /sys/module/process_reclaim/parameters/pressure_max + echo 30 > /sys/module/process_reclaim/parameters/swap_opt_eff + echo 1 > /sys/module/lowmemorykiller/parameters/enable_adaptive_lmk + if [ "$arch_type" == "aarch64" ] && [ $MemTotal -gt 4194304 ]; then + echo 10 > /sys/module/process_reclaim/parameters/pressure_min + echo 1024 > /sys/module/process_reclaim/parameters/per_swap_size + echo "18432,23040,27648,32256,55296,80640" > /sys/module/lowmemorykiller/parameters/minfree + echo 81250 > /sys/module/lowmemorykiller/parameters/vmpressure_file_min + elif [ "$arch_type" == "aarch64" ] && [ $MemTotal -gt 2097152 ]; then + echo 10 > /sys/module/process_reclaim/parameters/pressure_min + echo 1024 > /sys/module/process_reclaim/parameters/per_swap_size + echo "18432,23040,27648,32256,80640,140640" > /sys/module/lowmemorykiller/parameters/minfree + echo 81250 > /sys/module/lowmemorykiller/parameters/vmpressure_file_min + elif [ "$arch_type" == "aarch64" ] && [ $MemTotal -gt 1048576 ]; then + echo 10 > /sys/module/process_reclaim/parameters/pressure_min + echo 1024 > /sys/module/process_reclaim/parameters/per_swap_size + echo "14746,18432,22118,25805,40000,55000" > /sys/module/lowmemorykiller/parameters/minfree + echo 81250 > /sys/module/lowmemorykiller/parameters/vmpressure_file_min + elif [ "$arch_type" == "aarch64" ]; then + echo 50 > /sys/module/process_reclaim/parameters/pressure_min + echo 512 > /sys/module/process_reclaim/parameters/per_swap_size + echo "14746,18432,22118,25805,40000,55000" > /sys/module/lowmemorykiller/parameters/minfree + echo 81250 > /sys/module/lowmemorykiller/parameters/vmpressure_file_min + else + if [ $MemTotal -le 1048576 ] && [ "$low_ram" == "true" ]; then + # Disable KLMK, ALMK & PPR for Go devices + echo 0 > /sys/module/lowmemorykiller/parameters/enable_lmk + echo 0 > /sys/module/lowmemorykiller/parameters/enable_adaptive_lmk + echo 0 > /sys/module/process_reclaim/parameters/enable_process_reclaim + else + echo 50 > /sys/module/process_reclaim/parameters/pressure_min + echo 512 > /sys/module/process_reclaim/parameters/per_swap_size + echo "15360,19200,23040,26880,34415,43737" > /sys/module/lowmemorykiller/parameters/minfree + echo 53059 > /sys/module/lowmemorykiller/parameters/vmpressure_file_min + fi + fi + + configure_zram_parameters + + SWAP_ENABLE_THRESHOLD=1048576 + swap_enable=`getprop ro.vendor.qti.config.swap` + + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + # Enable swap initially only for 1 GB targets + if [ "$MemTotal" -le "$SWAP_ENABLE_THRESHOLD" ] && [ "$swap_enable" == "true" ]; then + # Static swiftness + echo 1 > /proc/sys/vm/swap_ratio_enable + echo 70 > /proc/sys/vm/swap_ratio + + # Swap disk - 200MB size + if [ ! -f /data/system/swap/swapfile ]; then + dd if=/dev/zero of=/data/system/swap/swapfile bs=1m count=200 + fi + mkswap /data/system/swap/swapfile + swapon /data/system/swap/swapfile -p 32758 + fi +fi +} + +function enable_memory_features() +{ + MemTotalStr=`cat /proc/meminfo | grep MemTotal` + MemTotal=${MemTotalStr:16:8} + + if [ $MemTotal -le 2097152 ]; then + #Enable B service adj transition for 2GB or less memory + setprop ro.vendor.qti.sys.fw.bservice_enable true + setprop ro.vendor.qti.sys.fw.bservice_limit 5 + setprop ro.vendor.qti.sys.fw.bservice_age 5000 + + #Enable Delay Service Restart + setprop ro.vendor.qti.am.reschedule_service true + fi +} + +function start_hbtp() +{ + # Start the Host based Touch processing but not in the power off mode. + bootmode=`getprop ro.bootmode` + if [ "charger" != $bootmode ]; then + start hbtp + fi +} + +case "$target" in + "msm7201a_ffa" | "msm7201a_surf" | "msm7627_ffa" | "msm7627_6x" | "msm7627a" | "msm7627_surf" | \ + "qsd8250_surf" | "qsd8250_ffa" | "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "qsd8650a_st1x") + echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold + ;; +esac + +case "$target" in + "msm7201a_ffa" | "msm7201a_surf") + echo 500000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + ;; +esac + +case "$target" in + "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") + echo 75000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + echo 1 > /sys/module/pm2/parameters/idle_sleep_mode + ;; +esac + +case "$target" in + "msm7201a_ffa" | "msm7201a_surf" | "msm7627_ffa" | "msm7627_6x" | "msm7627_surf" | "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "msm7627a" ) + echo 245760 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + ;; +esac + +case "$target" in + "msm8660") + echo 1 > /sys/module/rpm_resources/enable_low_power/L2_cache + echo 1 > /sys/module/rpm_resources/enable_low_power/pxo + echo 2 > /sys/module/rpm_resources/enable_low_power/vdd_dig + echo 2 > /sys/module/rpm_resources/enable_low_power/vdd_mem + echo 1 > /sys/module/rpm_resources/enable_low_power/rpm_cpu + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled + echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor + echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold + echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy + echo 4 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor + echo 384000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 384000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + chown -h system /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq + chown -h root.system /sys/devices/system/cpu/mfreq + chmod -h 220 /sys/devices/system/cpu/mfreq + chown -h root.system /sys/devices/system/cpu/cpu1/online + chmod -h 664 /sys/devices/system/cpu/cpu1/online + ;; +esac + +case "$target" in + "msm8960") + echo 1 > /sys/module/rpm_resources/enable_low_power/L2_cache + echo 1 > /sys/module/rpm_resources/enable_low_power/pxo + echo 1 > /sys/module/rpm_resources/enable_low_power/vdd_dig + echo 1 > /sys/module/rpm_resources/enable_low_power/vdd_mem + echo 1 > /sys/module/msm_pm/modes/cpu0/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled + echo 0 > /sys/module/msm_thermal/core_control/enabled + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor + echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold + echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy + echo 4 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor + echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential + echo 70 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core + echo 3 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core + echo 918000 > /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq + echo 1026000 > /sys/devices/system/cpu/cpufreq/ondemand/sync_freq + echo 80 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load + chown -h system /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + chown -h system /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor + chown -h system /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy + echo 384000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 384000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq + echo 384000 > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq + echo 384000 > /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + chown -h system /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq + chown -h system /sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq + chown -h system /sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq + echo 1 > /sys/module/msm_thermal/core_control/enabled + chown -h root.system /sys/devices/system/cpu/mfreq + chmod -h 220 /sys/devices/system/cpu/mfreq + chown -h root.system /sys/devices/system/cpu/cpu1/online + chown -h root.system /sys/devices/system/cpu/cpu2/online + chown -h root.system /sys/devices/system/cpu/cpu3/online + chmod -h 664 /sys/devices/system/cpu/cpu1/online + chmod -h 664 /sys/devices/system/cpu/cpu2/online + chmod -h 664 /sys/devices/system/cpu/cpu3/online + # set DCVS parameters for CPU + echo 40000 > /sys/module/msm_dcvs/cores/cpu0/slack_time_max_us + echo 40000 > /sys/module/msm_dcvs/cores/cpu0/slack_time_min_us + echo 100000 > /sys/module/msm_dcvs/cores/cpu0/em_win_size_min_us + echo 500000 > /sys/module/msm_dcvs/cores/cpu0/em_win_size_max_us + echo 0 > /sys/module/msm_dcvs/cores/cpu0/slack_mode_dynamic + echo 1000000 > /sys/module/msm_dcvs/cores/cpu0/disable_pc_threshold + echo 25000 > /sys/module/msm_dcvs/cores/cpu1/slack_time_max_us + echo 25000 > /sys/module/msm_dcvs/cores/cpu1/slack_time_min_us + echo 100000 > /sys/module/msm_dcvs/cores/cpu1/em_win_size_min_us + echo 500000 > /sys/module/msm_dcvs/cores/cpu1/em_win_size_max_us + echo 0 > /sys/module/msm_dcvs/cores/cpu1/slack_mode_dynamic + echo 1000000 > /sys/module/msm_dcvs/cores/cpu1/disable_pc_threshold + echo 25000 > /sys/module/msm_dcvs/cores/cpu2/slack_time_max_us + echo 25000 > /sys/module/msm_dcvs/cores/cpu2/slack_time_min_us + echo 100000 > /sys/module/msm_dcvs/cores/cpu2/em_win_size_min_us + echo 500000 > /sys/module/msm_dcvs/cores/cpu2/em_win_size_max_us + echo 0 > /sys/module/msm_dcvs/cores/cpu2/slack_mode_dynamic + echo 1000000 > /sys/module/msm_dcvs/cores/cpu2/disable_pc_threshold + echo 25000 > /sys/module/msm_dcvs/cores/cpu3/slack_time_max_us + echo 25000 > /sys/module/msm_dcvs/cores/cpu3/slack_time_min_us + echo 100000 > /sys/module/msm_dcvs/cores/cpu3/em_win_size_min_us + echo 500000 > /sys/module/msm_dcvs/cores/cpu3/em_win_size_max_us + echo 0 > /sys/module/msm_dcvs/cores/cpu3/slack_mode_dynamic + echo 1000000 > /sys/module/msm_dcvs/cores/cpu3/disable_pc_threshold + # set DCVS parameters for GPU + echo 20000 > /sys/module/msm_dcvs/cores/gpu0/slack_time_max_us + echo 20000 > /sys/module/msm_dcvs/cores/gpu0/slack_time_min_us + echo 0 > /sys/module/msm_dcvs/cores/gpu0/slack_mode_dynamic + # set msm_mpdecision parameters + echo 45000 > /sys/module/msm_mpdecision/slack_time_max_us + echo 15000 > /sys/module/msm_mpdecision/slack_time_min_us + echo 100000 > /sys/module/msm_mpdecision/em_win_size_min_us + echo 1000000 > /sys/module/msm_mpdecision/em_win_size_max_us + echo 3 > /sys/module/msm_mpdecision/online_util_pct_min + echo 25 > /sys/module/msm_mpdecision/online_util_pct_max + echo 97 > /sys/module/msm_mpdecision/em_max_util_pct + echo 2 > /sys/module/msm_mpdecision/rq_avg_poll_ms + echo 10 > /sys/module/msm_mpdecision/mp_em_rounding_point_min + echo 85 > /sys/module/msm_mpdecision/mp_em_rounding_point_max + echo 50 > /sys/module/msm_mpdecision/iowait_threshold_pct + #set permissions for the nodes needed by display on/off hook + chown -h system /sys/module/msm_dcvs/cores/cpu0/slack_time_max_us + chown -h system /sys/module/msm_dcvs/cores/cpu0/slack_time_min_us + chown -h system /sys/module/msm_mpdecision/slack_time_max_us + chown -h system /sys/module/msm_mpdecision/slack_time_min_us + chmod -h 664 /sys/module/msm_dcvs/cores/cpu0/slack_time_max_us + chmod -h 664 /sys/module/msm_dcvs/cores/cpu0/slack_time_min_us + chmod -h 664 /sys/module/msm_mpdecision/slack_time_max_us + chmod -h 664 /sys/module/msm_mpdecision/slack_time_min_us + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + case "$soc_id" in + "130") + echo 230 > /sys/class/gpio/export + echo 228 > /sys/class/gpio/export + echo 229 > /sys/class/gpio/export + echo "in" > /sys/class/gpio/gpio230/direction + echo "rising" > /sys/class/gpio/gpio230/edge + echo "in" > /sys/class/gpio/gpio228/direction + echo "rising" > /sys/class/gpio/gpio228/edge + echo "in" > /sys/class/gpio/gpio229/direction + echo "rising" > /sys/class/gpio/gpio229/edge + echo 253 > /sys/class/gpio/export + echo 254 > /sys/class/gpio/export + echo 257 > /sys/class/gpio/export + echo 258 > /sys/class/gpio/export + echo 259 > /sys/class/gpio/export + echo "out" > /sys/class/gpio/gpio253/direction + echo "out" > /sys/class/gpio/gpio254/direction + echo "out" > /sys/class/gpio/gpio257/direction + echo "out" > /sys/class/gpio/gpio258/direction + echo "out" > /sys/class/gpio/gpio259/direction + chown -h media /sys/class/gpio/gpio253/value + chown -h media /sys/class/gpio/gpio254/value + chown -h media /sys/class/gpio/gpio257/value + chown -h media /sys/class/gpio/gpio258/value + chown -h media /sys/class/gpio/gpio259/value + chown -h media /sys/class/gpio/gpio253/direction + chown -h media /sys/class/gpio/gpio254/direction + chown -h media /sys/class/gpio/gpio257/direction + chown -h media /sys/class/gpio/gpio258/direction + chown -h media /sys/class/gpio/gpio259/direction + echo 0 > /sys/module/rpm_resources/enable_low_power/vdd_dig + echo 0 > /sys/module/rpm_resources/enable_low_power/vdd_mem + ;; + esac + ;; +esac + +case "$target" in + "msm8974") + echo 4 > /sys/module/lpm_levels/enable_low_power/l2 + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/retention/idle_enabled + echo 0 > /sys/module/msm_thermal/core_control/enabled + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + case "$soc_id" in + "208" | "211" | "214" | "217" | "209" | "212" | "215" | "218" | "194" | "210" | "213" | "216") + for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor + do + echo "cpubw_hwmon" > $devfreq_gov + done + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "interactive" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor + echo "interactive" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor + echo "interactive" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor + echo "20000 1400000:40000 1700000:20000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load + echo 1190400 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq + echo 1 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy + echo "85 1500000:90 1800000:70" > /sys/devices/system/cpu/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time + echo 20 > /sys/module/cpu_boost/parameters/boost_ms + echo 1728000 > /sys/module/cpu_boost/parameters/sync_threshold + echo 100000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor + echo 1497600 > /sys/module/cpu_boost/parameters/input_boost_freq + echo 40 > /sys/module/cpu_boost/parameters/input_boost_ms + setprop ro.qualcomm.perf.cores_online 2 + ;; + *) + echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor + echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold + echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy + echo 2 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor + echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential + echo 70 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core + echo 3 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core + echo 960000 > /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq + echo 960000 > /sys/devices/system/cpu/cpufreq/ondemand/sync_freq + echo 1190400 > /sys/devices/system/cpu/cpufreq/ondemand/input_boost + echo 80 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load + ;; + esac + echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 300000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq + echo 300000 > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq + echo 300000 > /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 1 > /sys/module/msm_thermal/core_control/enabled + chown -h root.system /sys/devices/system/cpu/mfreq + chmod -h 220 /sys/devices/system/cpu/mfreq + chown -h root.system /sys/devices/system/cpu/cpu1/online + chown -h root.system /sys/devices/system/cpu/cpu2/online + chown -h root.system /sys/devices/system/cpu/cpu3/online + chmod -h 664 /sys/devices/system/cpu/cpu1/online + chmod -h 664 /sys/devices/system/cpu/cpu2/online + chmod -h 664 /sys/devices/system/cpu/cpu3/online + echo 1 > /dev/cpuctl/apps/cpu.notify_on_migrate + ;; +esac + +case "$target" in + "msm8916") + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + case "$soc_id" in + "206") + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 2 > /sys/class/net/rmnet0/queues/rx-0/rps_cpus + ;; + "247" | "248" | "249" | "250") + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + ;; + "239" | "241" | "263") + if [ -f /sys/devices/soc0/revision ]; then + revision=`cat /sys/devices/soc0/revision` + else + revision=`cat /sys/devices/system/soc/soc0/revision` + fi + echo 10 > /sys/class/net/rmnet0/queues/rx-0/rps_cpus + if [ -f /sys/devices/soc0/platform_subtype_id ]; then + platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id` + fi + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + fi + case "$soc_id" in + "239") + case "$hw_platform" in + "Surf") + case "$platform_subtype_id" in + "1" | "2") + start_hbtp + ;; + esac + ;; + "MTP") + case "$platform_subtype_id" in + "3") + start_hbtp + ;; + esac + ;; + esac + ;; + esac + ;; + "268" | "269" | "270" | "271") + echo 10 > /sys/class/net/rmnet0/queues/rx-0/rps_cpus + ;; + "233" | "240" | "242") + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + ;; + esac + ;; +esac + +case "$target" in + "msm8226") + echo 4 > /sys/module/lpm_levels/enable_low_power/l2 + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold + echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy + echo 2 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor + echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential + echo 70 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core + echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core + echo 787200 > /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq + echo 300000 > /sys/devices/system/cpu/cpufreq/ondemand/sync_freq + echo 80 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load + echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + chown -h root.system /sys/devices/system/cpu/cpu1/online + chown -h root.system /sys/devices/system/cpu/cpu2/online + chown -h root.system /sys/devices/system/cpu/cpu3/online + chmod -h 664 /sys/devices/system/cpu/cpu1/online + chmod -h 664 /sys/devices/system/cpu/cpu2/online + chmod -h 664 /sys/devices/system/cpu/cpu3/online + ;; +esac + +case "$target" in + "msm8610") + echo 4 > /sys/module/lpm_levels/enable_low_power/l2 + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold + echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy + echo 2 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor + echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential + echo 70 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core + echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core + echo 787200 > /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq + echo 300000 > /sys/devices/system/cpu/cpufreq/ondemand/sync_freq + echo 80 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load + echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + setprop ro.qualcomm.perf.min_freq 7 + echo 1 > /sys/kernel/mm/ksm/deferred_timer + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + chown -h root.system /sys/devices/system/cpu/cpu1/online + chown -h root.system /sys/devices/system/cpu/cpu2/online + chown -h root.system /sys/devices/system/cpu/cpu3/online + chmod -h 664 /sys/devices/system/cpu/cpu1/online + chmod -h 664 /sys/devices/system/cpu/cpu2/online + chmod -h 664 /sys/devices/system/cpu/cpu3/online + ;; +esac + +case "$target" in + "msm8916") + + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + # HMP scheduler settings for 8916, 8936, 8939, 8929 + echo 3 > /proc/sys/kernel/sched_window_stats_policy + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + + # Apply governor settings for 8916 + case "$soc_id" in + "206" | "247" | "248" | "249" | "250") + + # HMP scheduler load tracking settings + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + + # HMP Task packing settings for 8916 + echo 20 > /proc/sys/kernel/sched_small_task + echo 30 > /proc/sys/kernel/sched_mostly_idle_load + echo 3 > /proc/sys/kernel/sched_mostly_idle_nr_run + + # disable thermal core_control to update scaling_min_freq + echo 0 > /sys/module/msm_thermal/core_control/enabled + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + # enable thermal core_control now + echo 1 > /sys/module/msm_thermal/core_control/enabled + + echo "25000 1094400:50000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load + echo 30000 > /sys/devices/system/cpu/cpufreq/interactive/timer_rate + echo 998400 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy + echo "1 800000:85 998400:90 1094400:80" > /sys/devices/system/cpu/cpufreq/interactive/target_loads + echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time + echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu4/online + ;; + esac + + # Apply governor settings for 8936 + case "$soc_id" in + "233" | "240" | "242") + + # HMP scheduler load tracking settings + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + + # HMP Task packing settings for 8936 + echo 50 > /proc/sys/kernel/sched_small_task + echo 50 > /proc/sys/kernel/sched_mostly_idle_load + echo 10 > /proc/sys/kernel/sched_mostly_idle_nr_run + + # disable thermal core_control to update scaling_min_freq, interactive gov + echo 0 > /sys/module/msm_thermal/core_control/enabled + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + # enable thermal core_control now + echo 1 > /sys/module/msm_thermal/core_control/enabled + + echo "25000 1113600:50000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load + echo 30000 > /sys/devices/system/cpu/cpufreq/interactive/timer_rate + echo 960000 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy + echo "1 800000:85 1113600:90 1267200:80" > /sys/devices/system/cpu/cpufreq/interactive/target_loads + echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time + echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu4/online + + # Enable low power modes + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + for gpu_bimc_io_percent in /sys/class/devfreq/*qcom,gpubw*/bw_hwmon/io_percent + do + echo 40 > $gpu_bimc_io_percent + done + ;; + esac + + # Apply governor settings for 8939 + case "$soc_id" in + "239" | "241" | "263" | "268" | "269" | "270" | "271") + + if [ `cat /sys/devices/soc0/revision` != "3.0" ]; then + # Apply 1.0 and 2.0 specific Sched & Governor settings + + # HMP scheduler load tracking settings + echo 5 > /proc/sys/kernel/sched_ravg_hist_size + + # HMP Task packing settings for 8939, 8929 + echo 20 > /proc/sys/kernel/sched_small_task + + for devfreq_gov in /sys/class/devfreq/*qcom,mincpubw*/governor + do + echo "cpufreq" > $devfreq_gov + done + + for devfreq_gov in /sys/class/devfreq/*qcom,cpubw*/governor + do + echo "bw_hwmon" > $devfreq_gov + for cpu_io_percent in /sys/class/devfreq/*qcom,cpubw*/bw_hwmon/io_percent + do + echo 20 > $cpu_io_percent + done + done + + for gpu_bimc_io_percent in /sys/class/devfreq/*qcom,gpubw*/bw_hwmon/io_percent + do + echo 40 > $gpu_bimc_io_percent + done + # disable thermal core_control to update interactive gov settings + echo 0 > /sys/module/msm_thermal/core_control/enabled + + # enable governor for perf cluster + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "20000 1113600:50000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 85 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 1113600 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo "1 960000:85 1113600:90 1344000:80" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 50000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 50000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/sampling_down_factor + echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + + # enable governor for power cluster + echo 1 > /sys/devices/system/cpu/cpu4/online + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo "25000 800000:50000" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 998400 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo "1 800000:90" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor + echo 800000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + + # enable thermal core_control now + echo 1 > /sys/module/msm_thermal/core_control/enabled + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu4/online + echo 1 > /sys/devices/system/cpu/cpu5/online + echo 1 > /sys/devices/system/cpu/cpu6/online + echo 1 > /sys/devices/system/cpu/cpu7/online + + # Enable low power modes + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + # HMP scheduler (big.Little cluster related) settings + echo 75 > /proc/sys/kernel/sched_upmigrate + echo 60 > /proc/sys/kernel/sched_downmigrate + + # cpu idle load threshold + echo 30 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_load + + # cpu idle nr run threshold + echo 3 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_nr_run + + else + # Apply 3.0 specific Sched & Governor settings + # HMP scheduler settings for 8939 V3.0 + echo 3 > /proc/sys/kernel/sched_window_stats_policy + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + echo 20000000 > /proc/sys/kernel/sched_ravg_window + + # HMP Task packing settings for 8939 V3.0 + echo 20 > /proc/sys/kernel/sched_small_task + echo 30 > /proc/sys/kernel/sched_mostly_idle_load + echo 3 > /proc/sys/kernel/sched_mostly_idle_nr_run + + echo 0 > /sys/devices/system/cpu/cpu0/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu1/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu2/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu3/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu4/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu5/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu6/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu7/sched_prefer_idle + + for devfreq_gov in /sys/class/devfreq/*qcom,mincpubw*/governor + do + echo "cpufreq" > $devfreq_gov + done + + for devfreq_gov in /sys/class/devfreq/*qcom,cpubw*/governor + do + echo "bw_hwmon" > $devfreq_gov + for cpu_io_percent in /sys/class/devfreq/*qcom,cpubw*/bw_hwmon/io_percent + do + echo 20 > $cpu_io_percent + done + done + + for gpu_bimc_io_percent in /sys/class/devfreq/*qcom,gpubw*/bw_hwmon/io_percent + do + echo 40 > $gpu_bimc_io_percent + done + # disable thermal core_control to update interactive gov settings + echo 0 > /sys/module/msm_thermal/core_control/enabled + + # enable governor for perf cluster + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "19000 1113600:39000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 85 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 1113600 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo "1 960000:85 1113600:90 1344000:80" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/sampling_down_factor + echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + + # enable governor for power cluster + echo 1 > /sys/devices/system/cpu/cpu4/online + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 39000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 800000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo "1 800000:90" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor + echo 800000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + + # enable thermal core_control now + echo 1 > /sys/module/msm_thermal/core_control/enabled + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu5/online + echo 1 > /sys/devices/system/cpu/cpu6/online + echo 1 > /sys/devices/system/cpu/cpu7/online + + # Enable low power modes + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + # HMP scheduler (big.Little cluster related) settings + echo 93 > /proc/sys/kernel/sched_upmigrate + echo 83 > /proc/sys/kernel/sched_downmigrate + + # Enable sched guided freq control + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif + echo 50000 > /proc/sys/kernel/sched_freq_inc_notify + echo 50000 > /proc/sys/kernel/sched_freq_dec_notify + + # Enable core control +# insmod /system/lib/modules/core_ctl.ko + echo 2 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus + echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/max_cpus + echo 68 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres + echo 40 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres + echo 100 > /sys/devices/system/cpu/cpu0/core_ctl/offline_delay_ms + case "$revision" in + "3.0") + # Enable dynamic clock gatin + echo 1 > /sys/module/lpm_levels/lpm_workarounds/dynamic_clock_gating + ;; + esac + fi + ;; + esac + # Set Memory parameters + configure_memory_parameters + ;; +esac + +case "$target" in + "msm8952") + + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + case "$soc_id" in + "264" | "289") + # Apply Scheduler and Governor settings for 8952 + + # HMP scheduler settings + echo 3 > /proc/sys/kernel/sched_window_stats_policy + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + echo 20000000 > /proc/sys/kernel/sched_ravg_window + + # HMP Task packing settings + echo 20 > /proc/sys/kernel/sched_small_task + echo 30 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_load + + echo 3 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_nr_run + + echo 0 > /sys/devices/system/cpu/cpu0/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu1/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu2/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu3/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu4/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu5/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu6/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu7/sched_prefer_idle + + echo 0 > /proc/sys/kernel/sched_boost + + for devfreq_gov in /sys/class/devfreq/*qcom,mincpubw*/governor + do + echo "cpufreq" > $devfreq_gov + done + + for devfreq_gov in /sys/class/devfreq/*qcom,cpubw*/governor + do + echo "bw_hwmon" > $devfreq_gov + for cpu_io_percent in /sys/class/devfreq/*qcom,cpubw*/bw_hwmon/io_percent + do + echo 20 > $cpu_io_percent + done + for cpu_guard_band in /sys/class/devfreq/*qcom,cpubw*/bw_hwmon/guard_band_mbps + do + echo 30 > $cpu_guard_band + done + done + + for gpu_bimc_io_percent in /sys/class/devfreq/qcom,gpubw*/bw_hwmon/io_percent + do + echo 40 > $gpu_bimc_io_percent + done + # disable thermal & BCL core_control to update interactive gov settings + echo 0 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + bcl_hotplug_mask=`cat $hotplug_mask` + echo 0 > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + bcl_soc_hotplug_mask=`cat $hotplug_soc_mask` + echo 0 > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + + # enable governor for perf cluster + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "19000 1113600:39000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 85 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 1113600 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo "1 960000:85 1113600:90 1344000:80" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/sampling_down_factor + echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + + # enable governor for power cluster + echo 1 > /sys/devices/system/cpu/cpu4/online + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 39000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 806400 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo "1 806400:90" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor + echo 806400 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu4/online + echo 1 > /sys/devices/system/cpu/cpu5/online + echo 1 > /sys/devices/system/cpu/cpu6/online + echo 1 > /sys/devices/system/cpu/cpu7/online + + # Enable Low power modes + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + # HMP scheduler (big.Little cluster related) settings + echo 93 > /proc/sys/kernel/sched_upmigrate + echo 83 > /proc/sys/kernel/sched_downmigrate + + # Enable sched guided freq control + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif + echo 50000 > /proc/sys/kernel/sched_freq_inc_notify + echo 50000 > /proc/sys/kernel/sched_freq_dec_notify + + # Enable core control + echo 2 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus + echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/max_cpus + echo 68 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres + echo 40 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres + echo 100 > /sys/devices/system/cpu/cpu0/core_ctl/offline_delay_ms + echo 1 > /sys/devices/system/cpu/cpu0/core_ctl/is_big_cluster + + # re-enable thermal & BCL core_control now + echo 1 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + echo $bcl_hotplug_mask > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + echo $bcl_soc_hotplug_mask > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + + # Enable dynamic clock gating + echo 1 > /sys/module/lpm_levels/lpm_workarounds/dynamic_clock_gating + # Enable timer migration to little cluster + echo 1 > /proc/sys/kernel/power_aware_timer_migration + + # Set Memory parameters + configure_memory_parameters + + ;; + *) + panel=`cat /sys/class/graphics/fb0/modes` + if [ "${panel:5:1}" == "x" ]; then + panel=${panel:2:3} + else + panel=${panel:2:4} + fi + + # Apply Scheduler and Governor settings for 8976 + # SoC IDs are 266, 274, 277, 278 + + # HMP scheduler (big.Little cluster related) settings + echo 95 > /proc/sys/kernel/sched_upmigrate + echo 85 > /proc/sys/kernel/sched_downmigrate + + echo 2 > /proc/sys/kernel/sched_window_stats_policy + echo 5 > /proc/sys/kernel/sched_ravg_hist_size + + echo 3 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_nr_run + + for devfreq_gov in /sys/class/devfreq/*qcom,mincpubw*/governor + do + echo "cpufreq" > $devfreq_gov + done + + for devfreq_gov in /sys/class/devfreq/*qcom,cpubw*/governor + do + echo "bw_hwmon" > $devfreq_gov + for cpu_io_percent in /sys/class/devfreq/*qcom,cpubw*/bw_hwmon/io_percent + do + echo 20 > $cpu_io_percent + done + for cpu_guard_band in /sys/class/devfreq/*qcom,cpubw*/bw_hwmon/guard_band_mbps + do + echo 30 > $cpu_guard_band + done + done + + for gpu_bimc_io_percent in /sys/class/devfreq/qcom,gpubw*/bw_hwmon/io_percent + do + echo 40 > $gpu_bimc_io_percent + done + # disable thermal & BCL core_control to update interactive gov settings + echo 0 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + bcl_hotplug_mask=`cat $hotplug_mask` + echo 0 > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + bcl_soc_hotplug_mask=`cat $hotplug_soc_mask` + echo 0 > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + + # enable governor for power cluster + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 80 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 691200 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + + # enable governor for perf cluster + echo 1 > /sys/devices/system/cpu/cpu4/online + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 85 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor + echo 883200 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + echo 60000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/max_freq_hysteresis + + if [ $panel -gt 1080 ]; then + #set texture cache size for resolution greater than 1080p + setprop ro.hwui.texture_cache_size 72 + fi + + echo 59000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 1305600 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo "1 691200:80" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 1382400 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo "19000 1382400:39000" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo "85 1382400:90 1747200:80" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + # HMP Task packing settings for 8976 + echo 30 > /proc/sys/kernel/sched_small_task + echo 20 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load + echo 20 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load + echo 20 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load + echo 20 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load + echo 20 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_load + echo 20 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_load + echo 20 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_load + echo 20 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_load + + echo 0 > /proc/sys/kernel/sched_boost + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu4/online + echo 1 > /sys/devices/system/cpu/cpu5/online + echo 1 > /sys/devices/system/cpu/cpu6/online + echo 1 > /sys/devices/system/cpu/cpu7/online + + #Disable CPU retention modes for 32bit builds + ProductName=`getprop ro.product.name` + if [ "$ProductName" == "msm8952_32" ] || [ "$ProductName" == "msm8952_32_LMT" ]; then + echo N > /sys/module/lpm_levels/system/a72/cpu4/retention/idle_enabled + echo N > /sys/module/lpm_levels/system/a72/cpu5/retention/idle_enabled + echo N > /sys/module/lpm_levels/system/a72/cpu6/retention/idle_enabled + echo N > /sys/module/lpm_levels/system/a72/cpu7/retention/idle_enabled + fi + + if [ `cat /sys/devices/soc0/revision` == "1.0" ]; then + # Disable l2-pc and l2-gdhs low power modes + echo N > /sys/module/lpm_levels/system/a53/a53-l2-gdhs/idle_enabled + echo N > /sys/module/lpm_levels/system/a72/a72-l2-gdhs/idle_enabled + echo N > /sys/module/lpm_levels/system/a53/a53-l2-pc/idle_enabled + echo N > /sys/module/lpm_levels/system/a72/a72-l2-pc/idle_enabled + fi + + # Enable LPM Prediction + echo 1 > /sys/module/lpm_levels/parameters/lpm_prediction + + # Enable Low power modes + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + # Disable L2 GDHS on 8976 + echo N > /sys/module/lpm_levels/system/a53/a53-l2-gdhs/idle_enabled + echo N > /sys/module/lpm_levels/system/a72/a72-l2-gdhs/idle_enabled + + # Enable sched guided freq control + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif + echo 50000 > /proc/sys/kernel/sched_freq_inc_notify + echo 50000 > /proc/sys/kernel/sched_freq_dec_notify + + # Enable core control + #for 8976 + echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus + echo 4 > /sys/devices/system/cpu/cpu4/core_ctl/max_cpus + echo 68 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres + echo 40 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres + echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms + echo 1 > /sys/devices/system/cpu/cpu4/core_ctl/is_big_cluster + + # re-enable thermal & BCL core_control now + echo 1 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + echo $bcl_hotplug_mask > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + echo $bcl_soc_hotplug_mask > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + + # Enable timer migration to little cluster + echo 1 > /proc/sys/kernel/power_aware_timer_migration + + case "$soc_id" in + "277" | "278") + # Start energy-awareness for 8976 + start energy-awareness + ;; + esac + + #enable sched colocation and colocation inheritance + echo 130 > /proc/sys/kernel/sched_grp_upmigrate + echo 110 > /proc/sys/kernel/sched_grp_downmigrate + echo 1 > /proc/sys/kernel/sched_enable_thread_grouping + + # Set Memory parameters + configure_memory_parameters + + ;; + esac + #Enable Memory Features + enable_memory_features + ;; +esac + +case "$target" in + "msm8953") + + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + else + hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + + case "$soc_id" in + "293" | "304" | "338" | "351" ) + + # Start Host based Touch processing + case "$hw_platform" in + "MTP" | "Surf" | "RCM" ) + #if this directory is present, it means that a + #1200p panel is connected to the device. + dir="/sys/bus/i2c/devices/3-0038" + if [ ! -d "$dir" ]; then + start_hbtp + fi + ;; + esac + + #scheduler settings + echo 3 > /proc/sys/kernel/sched_window_stats_policy + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + #task packing settings + echo 0 > /sys/devices/system/cpu/cpu0/sched_static_cpu_pwr_cost + echo 0 > /sys/devices/system/cpu/cpu1/sched_static_cpu_pwr_cost + echo 0 > /sys/devices/system/cpu/cpu2/sched_static_cpu_pwr_cost + echo 0 > /sys/devices/system/cpu/cpu3/sched_static_cpu_pwr_cost + echo 0 > /sys/devices/system/cpu/cpu4/sched_static_cpu_pwr_cost + echo 0 > /sys/devices/system/cpu/cpu5/sched_static_cpu_pwr_cost + echo 0 > /sys/devices/system/cpu/cpu6/sched_static_cpu_pwr_cost + echo 0 > /sys/devices/system/cpu/cpu7/sched_static_cpu_pwr_cost + + #init task load, restrict wakeups to preferred cluster + echo 15 > /proc/sys/kernel/sched_init_task_load + # spill load is set to 100% by default in the kernel + echo 3 > /proc/sys/kernel/sched_spill_nr_run + # Apply inter-cluster load balancer restrictions + echo 1 > /proc/sys/kernel/sched_restrict_cluster_spill + + # set sync wakee policy tunable + echo 1 > /proc/sys/kernel/sched_prefer_sync_wakee_to_waker + + for devfreq_gov in /sys/class/devfreq/qcom,mincpubw*/governor + do + echo "cpufreq" > $devfreq_gov + done + + for devfreq_gov in /sys/class/devfreq/soc:qcom,cpubw/governor + do + echo "bw_hwmon" > $devfreq_gov + for cpu_io_percent in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/io_percent + do + echo 34 > $cpu_io_percent + done + for cpu_guard_band in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/guard_band_mbps + do + echo 0 > $cpu_guard_band + done + for cpu_hist_memory in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/hist_memory + do + echo 20 > $cpu_hist_memory + done + for cpu_hyst_length in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/hyst_length + do + echo 10 > $cpu_hyst_length + done + for cpu_idle_mbps in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/idle_mbps + do + echo 1600 > $cpu_idle_mbps + done + for cpu_low_power_delay in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/low_power_delay + do + echo 20 > $cpu_low_power_delay + done + for cpu_low_power_io_percent in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/low_power_io_percent + do + echo 34 > $cpu_low_power_io_percent + done + for cpu_mbps_zones in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/mbps_zones + do + echo "1611 3221 5859 6445 7104" > $cpu_mbps_zones + done + for cpu_sample_ms in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/sample_ms + do + echo 4 > $cpu_sample_ms + done + for cpu_up_scale in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/up_scale + do + echo 250 > $cpu_up_scale + done + for cpu_min_freq in /sys/class/devfreq/soc:qcom,cpubw/min_freq + do + echo 1611 > $cpu_min_freq + done + done + + for gpu_bimc_io_percent in /sys/class/devfreq/soc:qcom,gpubw/bw_hwmon/io_percent + do + echo 40 > $gpu_bimc_io_percent + done + + # Configure DCC module to capture critical register contents when device crashes + for DCC_PATH in /sys/bus/platform/devices/*.dcc* + do + echo 0 > $DCC_PATH/enable + echo cap > $DCC_PATH/func_type + echo sram > $DCC_PATH/data_sink + echo 1 > $DCC_PATH/config_reset + + # Register specifies APC CPR closed-loop settled voltage for current voltage corner + echo 0xb1d2c18 1 > $DCC_PATH/config + + # Register specifies SW programmed open-loop voltage for current voltage corner + echo 0xb1d2900 1 > $DCC_PATH/config + + # Register specifies APM switch settings and APM FSM state + echo 0xb1112b0 1 > $DCC_PATH/config + + # Register specifies CPR mode change state and also #online cores input to CPR HW + echo 0xb018798 1 > $DCC_PATH/config + + echo 1 > $DCC_PATH/enable + done + + # disable thermal & BCL core_control to update interactive gov settings + echo 0 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + bcl_hotplug_mask=`cat $hotplug_mask` + echo 0 > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + bcl_soc_hotplug_mask=`cat $hotplug_soc_mask` + echo 0 > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + + #governor settings + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "19000 1401600:39000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay + echo 85 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpufreq/interactive/timer_rate + echo 1401600 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy + echo "85 1401600:80" > /sys/devices/system/cpu/cpufreq/interactive/target_loads + echo 39000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor + echo 652800 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + + # re-enable thermal & BCL core_control now + echo 1 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + echo $bcl_hotplug_mask > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + echo $bcl_soc_hotplug_mask > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu4/online + echo 1 > /sys/devices/system/cpu/cpu5/online + echo 1 > /sys/devices/system/cpu/cpu6/online + echo 1 > /sys/devices/system/cpu/cpu7/online + + # Enable low power modes + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + # SMP scheduler + echo 85 > /proc/sys/kernel/sched_upmigrate + echo 85 > /proc/sys/kernel/sched_downmigrate + echo 19 > /proc/sys/kernel/sched_upmigrate_min_nice + + # Enable sched guided freq control + echo 1 > /sys/devices/system/cpu/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpufreq/interactive/use_migration_notif + echo 200000 > /proc/sys/kernel/sched_freq_inc_notify + echo 200000 > /proc/sys/kernel/sched_freq_dec_notify + + # Set Memory parameters + configure_memory_parameters + ;; + esac + ;; +esac + +case "$target" in + "msm8937") + + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + else + hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + if [ -f /sys/devices/soc0/platform_subtype_id ]; then + platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id` + fi + + case "$soc_id" in + "303" | "307" | "308" | "309" | "320" ) + + # Start Host based Touch processing + case "$hw_platform" in + "MTP" ) + start_hbtp + ;; + esac + + case "$hw_platform" in + "Surf" | "RCM" ) + if [ $platform_subtype_id -ne "4" ]; then + start_hbtp + fi + ;; + esac + # Apply Scheduler and Governor settings for 8917 / 8920 + + # HMP scheduler settings + echo 3 > /proc/sys/kernel/sched_window_stats_policy + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + echo 20000000 > /proc/sys/kernel/sched_ravg_window + echo 1 > /proc/sys/kernel/sched_restrict_tasks_spread + + #disable sched_boost in 8917 + echo 0 > /proc/sys/kernel/sched_boost + + # HMP Task packing settings + echo 20 > /proc/sys/kernel/sched_small_task + echo 30 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load + + echo 3 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_nr_run + + echo 0 > /sys/devices/system/cpu/cpu0/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu1/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu2/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu3/sched_prefer_idle + + # core_ctl is not needed for 8917. Disable it. + echo 1 > /sys/devices/system/cpu/cpu0/core_ctl/disable + + for devfreq_gov in /sys/class/devfreq/qcom,mincpubw*/governor + do + echo "cpufreq" > $devfreq_gov + done + + for devfreq_gov in /sys/class/devfreq/soc:qcom,cpubw/governor + do + echo "bw_hwmon" > $devfreq_gov + for cpu_io_percent in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/io_percent + do + echo 20 > $cpu_io_percent + done + for cpu_guard_band in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/guard_band_mbps + do + echo 30 > $cpu_guard_band + done + done + + for gpu_bimc_io_percent in /sys/class/devfreq/soc:qcom,gpubw/bw_hwmon/io_percent + do + echo 40 > $gpu_bimc_io_percent + done + + # disable thermal core_control to update interactive gov settings + echo 0 > /sys/module/msm_thermal/core_control/enabled + + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "19000 1094400:39000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay + echo 85 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpufreq/interactive/timer_rate + echo 1094400 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy + echo "1 960000:85 1094400:90" > /sys/devices/system/cpu/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor + echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + + # re-enable thermal core_control now + echo 1 > /sys/module/msm_thermal/core_control/enabled + + # Disable L2-GDHS low power modes + echo N > /sys/module/lpm_levels/perf/perf-l2-gdhs/idle_enabled + echo N > /sys/module/lpm_levels/perf/perf-l2-gdhs/suspend_enabled + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + + # Enable low power modes + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + # Enable sched guided freq control + echo 1 > /sys/devices/system/cpu/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpufreq/interactive/use_migration_notif + echo 50000 > /proc/sys/kernel/sched_freq_inc_notify + echo 50000 > /proc/sys/kernel/sched_freq_dec_notify + + # Set rps mask + echo 2 > /sys/class/net/rmnet0/queues/rx-0/rps_cpus + + # Enable dynamic clock gating + echo 1 > /sys/module/lpm_levels/lpm_workarounds/dynamic_clock_gating + # Enable timer migration to little cluster + echo 1 > /proc/sys/kernel/power_aware_timer_migration + # Set Memory parameters + configure_memory_parameters + ;; + *) + ;; + esac + + case "$soc_id" in + "294" | "295" | "313" ) + + # Start Host based Touch processing + case "$hw_platform" in + "MTP" | "Surf" | "RCM" ) + start_hbtp + ;; + esac + + # Apply Scheduler and Governor settings for 8937/8940 + + # HMP scheduler settings + echo 3 > /proc/sys/kernel/sched_window_stats_policy + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + echo 20000000 > /proc/sys/kernel/sched_ravg_window + + #disable sched_boost in 8937 + echo 0 > /proc/sys/kernel/sched_boost + + # HMP Task packing settings + echo 20 > /proc/sys/kernel/sched_small_task + echo 30 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_load + + echo 3 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu4/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu5/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu6/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu7/sched_mostly_idle_nr_run + + echo 0 > /sys/devices/system/cpu/cpu0/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu1/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu2/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu3/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu4/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu5/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu6/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu7/sched_prefer_idle + + for devfreq_gov in /sys/class/devfreq/qcom,mincpubw*/governor + do + echo "cpufreq" > $devfreq_gov + done + + for devfreq_gov in /sys/class/devfreq/soc:qcom,cpubw/governor + do + echo "bw_hwmon" > $devfreq_gov + for cpu_io_percent in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/io_percent + do + echo 20 > $cpu_io_percent + done + for cpu_guard_band in /sys/class/devfreq/soc:qcom,cpubw/bw_hwmon/guard_band_mbps + do + echo 30 > $cpu_guard_band + done + done + + for gpu_bimc_io_percent in /sys/class/devfreq/soc:qcom,gpubw/bw_hwmon/io_percent + do + echo 40 > $gpu_bimc_io_percent + done + + # disable thermal core_control to update interactive gov and core_ctl settings + echo 0 > /sys/module/msm_thermal/core_control/enabled + + # enable governor for perf cluster + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "19000 1094400:39000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 85 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 1094400 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo "1 960000:85 1094400:90 1344000:80" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/sampling_down_factor + echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + + # enable governor for power cluster + echo 1 > /sys/devices/system/cpu/cpu4/online + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 39000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 768000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo "1 768000:90" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/sampling_down_factor + echo 768000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + + # Disable L2-GDHS low power modes + echo N > /sys/module/lpm_levels/system/pwr/pwr-l2-gdhs/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/pwr-l2-gdhs/suspend_enabled + echo N > /sys/module/lpm_levels/system/perf/perf-l2-gdhs/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/perf-l2-gdhs/suspend_enabled + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu4/online + echo 1 > /sys/devices/system/cpu/cpu5/online + echo 1 > /sys/devices/system/cpu/cpu6/online + echo 1 > /sys/devices/system/cpu/cpu7/online + + # Enable low power modes + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + # HMP scheduler (big.Little cluster related) settings + echo 93 > /proc/sys/kernel/sched_upmigrate + echo 83 > /proc/sys/kernel/sched_downmigrate + + # Enable sched guided freq control + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif + echo 50000 > /proc/sys/kernel/sched_freq_inc_notify + echo 50000 > /proc/sys/kernel/sched_freq_dec_notify + + # Enable core control + echo 2 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus + echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/max_cpus + echo 68 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres + echo 40 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres + echo 100 > /sys/devices/system/cpu/cpu0/core_ctl/offline_delay_ms + echo 1 > /sys/devices/system/cpu/cpu0/core_ctl/is_big_cluster + + # re-enable thermal core_control + echo 1 > /sys/module/msm_thermal/core_control/enabled + + # Enable dynamic clock gating + echo 1 > /sys/module/lpm_levels/lpm_workarounds/dynamic_clock_gating + # Enable timer migration to little cluster + echo 1 > /proc/sys/kernel/power_aware_timer_migration + # Set Memory parameters + configure_memory_parameters + ;; + *) + + ;; + esac + ;; +esac + +case "$target" in + "sdm660") + + # Set the default IRQ affinity to the primary cluster. When a + # CPU is isolated/hotplugged, the IRQ affinity is adjusted + # to one of the CPU from the default IRQ affinity mask. + echo f > /proc/irq/default_smp_affinity + + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + else + hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + + panel=`cat /sys/class/graphics/fb0/modes` + if [ "${panel:5:1}" == "x" ]; then + panel=${panel:2:3} + else + panel=${panel:2:4} + fi + + if [ $panel -gt 1080 ]; then + echo 2 > /proc/sys/kernel/sched_window_stats_policy + echo 5 > /proc/sys/kernel/sched_ravg_hist_size + else + echo 3 > /proc/sys/kernel/sched_window_stats_policy + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + fi + #Apply settings for sdm660, sdm636,sda636 + case "$soc_id" in + "317" | "324" | "325" | "326" | "345" | "346" ) + + echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus + echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres + echo 30 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres + echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms + echo 1 > /sys/devices/system/cpu/cpu4/core_ctl/is_big_cluster + echo 4 > /sys/devices/system/cpu/cpu4/core_ctl/task_thres + + # Setting b.L scheduler parameters + echo 96 > /proc/sys/kernel/sched_upmigrate + echo 90 > /proc/sys/kernel/sched_downmigrate + echo 140 > /proc/sys/kernel/sched_group_upmigrate + echo 120 > /proc/sys/kernel/sched_group_downmigrate + echo 0 > /proc/sys/kernel/sched_select_prev_cpu_us + echo 400000 > /proc/sys/kernel/sched_freq_inc_notify + echo 400000 > /proc/sys/kernel/sched_freq_dec_notify + echo 5 > /proc/sys/kernel/sched_spill_nr_run + echo 1 > /proc/sys/kernel/sched_restrict_cluster_spill + echo 100000 > /proc/sys/kernel/sched_short_burst_ns + echo 1 > /proc/sys/kernel/sched_prefer_sync_wakee_to_waker + + # cpuset settings + echo 0-7 > /dev/cpuset/top-app/cpus + echo 4-7 > /dev/cpuset/foreground/boost/cpus + echo 0-2,4-7 > /dev/cpuset/foreground/cpus + echo 0-1 > /dev/cpuset/background/cpus + echo 0-2 > /dev/cpuset/system-background/cpus + + # disable thermal bcl hotplug to switch governor + echo 0 > /sys/module/msm_thermal/core_control/enabled + + # online CPU0 + echo 1 > /sys/devices/system/cpu/cpu0/online + # configure governor settings for little cluster + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo "19000 1401600:39000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 1401600 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo "85 1747200:95" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 39000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/max_freq_hysteresis + echo 633600 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/ignore_hispeed_on_notif + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/fast_ramp_down + # online CPU4 + echo 1 > /sys/devices/system/cpu/cpu4/online + # configure governor settings for big cluster + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif + echo "19000 1401600:39000" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 1401600 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo "85 1401600:90 2150400:95" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + echo 39000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 59000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/max_freq_hysteresis + echo 1113600 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/ignore_hispeed_on_notif + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/fast_ramp_down + + # bring all cores online + echo 1 > /sys/devices/system/cpu/cpu0/online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu4/online + echo 1 > /sys/devices/system/cpu/cpu5/online + echo 1 > /sys/devices/system/cpu/cpu6/online + echo 1 > /sys/devices/system/cpu/cpu7/online + + # configure LPM + echo N > /sys/module/lpm_levels/system/pwr/cpu0/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu1/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu2/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu3/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu4/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu5/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu6/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu7/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/pwr-l2-dynret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/perf-l2-dynret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/pwr-l2-ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/perf-l2-ret/idle_enabled + # enable LPM + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + # re-enable thermal and BCL hotplug + echo 1 > /sys/module/msm_thermal/core_control/enabled + + #Add-begin-HMI_L8866_A01-794,lijiang@longcheer.com,2018-01-20 + #Enable input boost configuration + echo "0:1401600" > /sys/module/cpu_boost/parameters/input_boost_freq + echo 60 > /sys/module/cpu_boost/parameters/input_boost_ms + #Add-end-HMI_L8866_A01-794 + # Set Memory parameters + configure_memory_parameters + + # Enable bus-dcvs + for cpubw in /sys/class/devfreq/*qcom,cpubw* + do + echo "bw_hwmon" > $cpubw/governor + echo 50 > $cpubw/polling_interval + echo 762 > $cpubw/min_freq + echo "1525 3143 5859 7759 9887 10327 11863 13763" > $cpubw/bw_hwmon/mbps_zones + echo 4 > $cpubw/bw_hwmon/sample_ms + echo 85 > $cpubw/bw_hwmon/io_percent + echo 100 > $cpubw/bw_hwmon/decay_rate + echo 50 > $cpubw/bw_hwmon/bw_step + echo 20 > $cpubw/bw_hwmon/hist_memory + echo 0 > $cpubw/bw_hwmon/hyst_length + echo 80 > $cpubw/bw_hwmon/down_thres + echo 0 > $cpubw/bw_hwmon/low_power_ceil_mbps + echo 34 > $cpubw/bw_hwmon/low_power_io_percent + echo 20 > $cpubw/bw_hwmon/low_power_delay + echo 0 > $cpubw/bw_hwmon/guard_band_mbps + echo 250 > $cpubw/bw_hwmon/up_scale + echo 1600 > $cpubw/bw_hwmon/idle_mbps + done + + for memlat in /sys/class/devfreq/*qcom,memlat-cpu* + do + echo "mem_latency" > $memlat/governor + echo 10 > $memlat/polling_interval + echo 400 > $memlat/mem_latency/ratio_ceil + done + echo "cpufreq" > /sys/class/devfreq/soc:qcom,mincpubw/governor + + + # Start Host based Touch processing + # case "$hw_platform" in + # "MTP" | "Surf" | "RCM" | "QRD" ) + # start_hbtp + # ;; + # esac + ;; + esac + #Apply settings for sdm630 + case "$soc_id" in + "318" | "327" ) + + # Start Host based Touch processing + #case "$hw_platform" in + # "MTP" | "Surf" | "RCM" | "QRD" ) + # start_hbtp + # ;; + #esac + + # Setting b.L scheduler parameters + echo 85 > /proc/sys/kernel/sched_upmigrate + echo 85 > /proc/sys/kernel/sched_downmigrate + echo 900 > /proc/sys/kernel/sched_group_upmigrate + echo 900 > /proc/sys/kernel/sched_group_downmigrate + echo 0 > /proc/sys/kernel/sched_select_prev_cpu_us + echo 400000 > /proc/sys/kernel/sched_freq_inc_notify + echo 400000 > /proc/sys/kernel/sched_freq_dec_notify + echo 3 > /proc/sys/kernel/sched_spill_nr_run + + #init task load, restrict wakeups to preferred cluster + echo 15 > /proc/sys/kernel/sched_init_task_load + echo 1 > /proc/sys/kernel/sched_restrict_cluster_spill + echo 50000 > /proc/sys/kernel/sched_short_burst_ns + + # cpuset settings + echo 0-3 > /dev/cpuset/background/cpus + echo 0-3 > /dev/cpuset/system-background/cpus + + # disable thermal bcl hotplug to switch governor + echo 0 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + bcl_hotplug_mask=`cat $hotplug_mask` + echo 0 > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + bcl_soc_hotplug_mask=`cat $hotplug_soc_mask` + echo 0 > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + + # online CPU0 + echo 1 > /sys/devices/system/cpu/cpu0/online + # configure governor settings for Big cluster(CPU0 to CPU3) + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo "19000 1344000:39000" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 85 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 1344000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo "85 1344000:80" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 39000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/max_freq_hysteresis + echo 787200 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/ignore_hispeed_on_notif + + # online CPU4 + echo 1 > /sys/devices/system/cpu/cpu4/online + # configure governor settings for Little cluster(CPU4 to CPU7) + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif + echo "19000 1094400:39000" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo 85 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 1094400 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo "85 1094400:80" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + echo 39000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/max_freq_hysteresis + echo 614400 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/ignore_hispeed_on_notif + + # bring all cores online + echo 1 > /sys/devices/system/cpu/cpu0/online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 1 > /sys/devices/system/cpu/cpu4/online + echo 1 > /sys/devices/system/cpu/cpu5/online + echo 1 > /sys/devices/system/cpu/cpu6/online + echo 1 > /sys/devices/system/cpu/cpu7/online + + # configure LPM + echo N > /sys/module/lpm_levels/system/perf/cpu0/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu1/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu2/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu3/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu4/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu5/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu6/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu7/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/pwr-l2-dynret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/perf-l2-dynret/idle_enabled + # enable LPM + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + # re-enable thermal and BCL hotplug + echo 1 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + echo $bcl_hotplug_mask > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + echo $bcl_soc_hotplug_mask > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + + # Set Memory parameters + configure_memory_parameters + + # Enable bus-dcvs + for cpubw in /sys/class/devfreq/*qcom,cpubw* + do + echo "bw_hwmon" > $cpubw/governor + echo 50 > $cpubw/polling_interval + echo 762 > $cpubw/min_freq + echo "1525 3143 4173 5195 5859 7759 9887 10327" > $cpubw/bw_hwmon/mbps_zones + echo 4 > $cpubw/bw_hwmon/sample_ms + echo 85 > $cpubw/bw_hwmon/io_percent + echo 20 > $cpubw/bw_hwmon/hist_memory + echo 0 > $cpubw/bw_hwmon/hyst_length + echo 100 > $cpubw/bw_hwmon/decay_rate + echo 50 > $cpubw/bw_hwmon/bw_step + echo 80 > $cpubw/bw_hwmon/down_thres + echo 0 > $cpubw/bw_hwmon/low_power_ceil_mbps + echo 50 > $cpubw/bw_hwmon/low_power_io_percent + echo 20 > $cpubw/bw_hwmon/low_power_delay + echo 0 > $cpubw/bw_hwmon/guard_band_mbps + echo 250 > $cpubw/bw_hwmon/up_scale + echo 1600 > $cpubw/bw_hwmon/idle_mbps + done + + for memlat in /sys/class/devfreq/*qcom,memlat-cpu* + do + echo "mem_latency" > $memlat/governor + echo 10 > $memlat/polling_interval + echo 400 > $memlat/mem_latency/ratio_ceil + done + + echo "cpufreq" > /sys/class/devfreq/soc:qcom,mincpubw/governor + ;; + esac + ;; +esac + +case "$target" in + "apq8084") + echo 4 > /sys/module/lpm_levels/enable_low_power/l2 + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/retention/idle_enabled + echo 0 > /sys/module/msm_thermal/core_control/enabled + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor + do + echo "cpubw_hwmon" > $devfreq_gov + done + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "interactive" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor + echo "interactive" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor + echo "interactive" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor + echo "20000 1400000:40000 1700000:20000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load + echo 1497600 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq + echo "85 1500000:90 1800000:70" > /sys/devices/system/cpu/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time + echo 20 > /sys/module/cpu_boost/parameters/boost_ms + echo 1728000 > /sys/module/cpu_boost/parameters/sync_threshold + echo 100000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor + echo 1497600 > /sys/module/cpu_boost/parameters/input_boost_freq + echo 40 > /sys/module/cpu_boost/parameters/input_boost_ms + echo 1 > /dev/cpuctl/apps/cpu.notify_on_migrate + echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 300000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq + echo 300000 > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq + echo 300000 > /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq + echo 1 > /sys/module/msm_thermal/core_control/enabled + setprop ro.qualcomm.perf.cores_online 2 + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + chown -h root.system /sys/devices/system/cpu/mfreq + chmod -h 220 /sys/devices/system/cpu/mfreq + chown -h root.system /sys/devices/system/cpu/cpu1/online + chown -h root.system /sys/devices/system/cpu/cpu2/online + chown -h root.system /sys/devices/system/cpu/cpu3/online + chmod -h 664 /sys/devices/system/cpu/cpu1/online + chmod -h 664 /sys/devices/system/cpu/cpu2/online + chmod -h 664 /sys/devices/system/cpu/cpu3/online + ;; +esac + +case "$target" in + "mpq8092") + echo 4 > /sys/module/lpm_levels/enable_low_power/l2 + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu0/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu1/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu2/retention/idle_enabled + echo 1 > /sys/module/msm_pm/modes/cpu3/retention/idle_enabled + echo 0 > /sys/module/msm_thermal/core_control/enabled + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor + echo "ondemand" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor + echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + echo 90 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold + echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy + echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 300000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq + echo 300000 > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq + echo 300000 > /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq + echo 1 > /sys/module/msm_thermal/core_control/enabled + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq + chown -h system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + chown -h root.system /sys/devices/system/cpu/mfreq + chmod -h 220 /sys/devices/system/cpu/mfreq + chown -h root.system /sys/devices/system/cpu/cpu1/online + chown -h root.system /sys/devices/system/cpu/cpu2/online + chown -h root.system /sys/devices/system/cpu/cpu3/online + chmod -h 664 /sys/devices/system/cpu/cpu1/online + chmod -h 664 /sys/devices/system/cpu/cpu2/online + chmod -h 664 /sys/devices/system/cpu/cpu3/online + ;; +esac + +case "$target" in + "msm8992") + # disable thermal bcl hotplug to switch governor + echo 0 > /sys/module/msm_thermal/core_control/enabled + echo -n disable > /sys/devices/soc.*/qcom,bcl.*/mode + bcl_hotplug_mask=`cat /sys/devices/soc.*/qcom,bcl.*/hotplug_mask` + echo 0 > /sys/devices/soc.*/qcom,bcl.*/hotplug_mask + echo -n enable > /sys/devices/soc.*/qcom,bcl.*/mode + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + # configure governor settings for little cluster + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo 19000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo 80 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 80000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/max_freq_hysteresis + echo 384000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + # online CPU4 + echo 1 > /sys/devices/system/cpu/cpu4/online + # configure governor settings for big cluster + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif + echo 19000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 1536000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo 85 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 80000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/max_freq_hysteresis + echo 384000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + # re-enable thermal and BCL hotplug + echo 1 > /sys/module/msm_thermal/core_control/enabled + echo -n disable > /sys/devices/soc.*/qcom,bcl.*/mode + echo $bcl_hotplug_mask > /sys/devices/soc.*/qcom,bcl.*/hotplug_mask + echo $bcl_soc_hotplug_mask > /sys/devices/soc.*/qcom,bcl.*/hotplug_soc_mask + echo -n enable > /sys/devices/soc.*/qcom,bcl.*/mode + # plugin remaining A57s + echo 1 > /sys/devices/system/cpu/cpu5/online + # input boost configuration + echo 0:1248000 > /sys/module/cpu_boost/parameters/input_boost_freq + echo 40 > /sys/module/cpu_boost/parameters/input_boost_ms + # Enable task migration fixups in the scheduler + echo 1 > /proc/sys/kernel/sched_migration_fixup + for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor + do + echo "bw_hwmon" > $devfreq_gov + done + #enable rps static configuration + echo 8 > /sys/class/net/rmnet_ipa0/queues/rx-0/rps_cpus + echo 30 > /proc/sys/kernel/sched_small_task + ;; +esac + +case "$target" in + "msm8994") + # ensure at most one A57 is online when thermal hotplug is disabled + echo 0 > /sys/devices/system/cpu/cpu5/online + echo 0 > /sys/devices/system/cpu/cpu6/online + echo 0 > /sys/devices/system/cpu/cpu7/online + # in case CPU4 is online, limit its frequency + echo 960000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_max_freq + # Limit A57 max freq from msm_perf module in case CPU 4 is offline + echo "4:960000 5:960000 6:960000 7:960000" > /sys/module/msm_performance/parameters/cpu_max_freq + # disable thermal bcl hotplug to switch governor + echo 0 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + bcl_hotplug_mask=`cat $hotplug_mask` + echo 0 > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + bcl_soc_hotplug_mask=`cat $hotplug_soc_mask` + echo 0 > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + # configure governor settings for little cluster + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo 19000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo 80 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 80000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/max_freq_hysteresis + echo 384000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + # online CPU4 + echo 1 > /sys/devices/system/cpu/cpu4/online + # Best effort limiting for first time boot if msm_performance module is absent + echo 960000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_max_freq + # configure governor settings for big cluster + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif + echo "19000 1400000:39000 1700000:19000" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 1248000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo "85 1500000:90 1800000:70" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + echo 40000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 80000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/max_freq_hysteresis + echo 384000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + # restore A57's max + cat /sys/devices/system/cpu/cpu4/cpufreq/cpuinfo_max_freq > /sys/devices/system/cpu/cpu4/cpufreq/scaling_max_freq + # re-enable thermal and BCL hotplug + echo 1 > /sys/module/msm_thermal/core_control/enabled + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n disable > $mode + done + for hotplug_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_mask + do + echo $bcl_hotplug_mask > $hotplug_mask + done + for hotplug_soc_mask in /sys/devices/soc.0/qcom,bcl.*/hotplug_soc_mask + do + echo $bcl_soc_hotplug_mask > $hotplug_soc_mask + done + for mode in /sys/devices/soc.0/qcom,bcl.*/mode + do + echo -n enable > $mode + done + # plugin remaining A57s + echo 1 > /sys/devices/system/cpu/cpu5/online + echo 1 > /sys/devices/system/cpu/cpu6/online + echo 1 > /sys/devices/system/cpu/cpu7/online + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + # Restore CPU 4 max freq from msm_performance + echo "4:4294967295 5:4294967295 6:4294967295 7:4294967295" > /sys/module/msm_performance/parameters/cpu_max_freq + # input boost configuration + echo 0:1344000 > /sys/module/cpu_boost/parameters/input_boost_freq + echo 40 > /sys/module/cpu_boost/parameters/input_boost_ms + # Setting b.L scheduler parameters + echo 1 > /proc/sys/kernel/sched_migration_fixup + echo 30 > /proc/sys/kernel/sched_small_task + echo 20 > /proc/sys/kernel/sched_mostly_idle_load + echo 3 > /proc/sys/kernel/sched_mostly_idle_nr_run + echo 99 > /proc/sys/kernel/sched_upmigrate + echo 85 > /proc/sys/kernel/sched_downmigrate + echo 400000 > /proc/sys/kernel/sched_freq_inc_notify + echo 400000 > /proc/sys/kernel/sched_freq_dec_notify + #enable rps static configuration + echo 8 > /sys/class/net/rmnet_ipa0/queues/rx-0/rps_cpus + for devfreq_gov in /sys/class/devfreq/qcom,cpubw*/governor + do + echo "bw_hwmon" > $devfreq_gov + done + ;; +esac + +case "$target" in + "msm8996") + # disable thermal bcl hotplug to switch governor + echo 0 > /sys/module/msm_thermal/core_control/enabled + echo -n disable > /sys/devices/soc/soc:qcom,bcl/mode + bcl_hotplug_mask=`cat /sys/devices/soc/soc:qcom,bcl/hotplug_mask` + echo 0 > /sys/devices/soc/soc:qcom,bcl/hotplug_mask + bcl_soc_hotplug_mask=`cat /sys/devices/soc/soc:qcom,bcl/hotplug_soc_mask` + echo 0 > /sys/devices/soc/soc:qcom,bcl/hotplug_soc_mask + echo -n enable > /sys/devices/soc/soc:qcom,bcl/mode + # set sync wakee policy tunable + echo 1 > /proc/sys/kernel/sched_prefer_sync_wakee_to_waker + # configure governor settings for little cluster + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo 19000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 960000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo 80 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 19000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 79000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/max_freq_hysteresis + echo 300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/ignore_hispeed_on_notif + # online CPU2 + echo 1 > /sys/devices/system/cpu/cpu2/online + # configure governor settings for big cluster + echo "interactive" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu2/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu2/cpufreq/interactive/use_migration_notif + echo "19000 1400000:39000 1700000:19000 2100000:79000" > /sys/devices/system/cpu/cpu2/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu2/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu2/cpufreq/interactive/timer_rate + echo 1248000 > /sys/devices/system/cpu/cpu2/cpufreq/interactive/hispeed_freq + echo 1 > /sys/devices/system/cpu/cpu2/cpufreq/interactive/io_is_busy + echo "85 1500000:90 1800000:70 2100000:95" > /sys/devices/system/cpu/cpu2/cpufreq/interactive/target_loads + echo 19000 > /sys/devices/system/cpu/cpu2/cpufreq/interactive/min_sample_time + echo 79000 > /sys/devices/system/cpu/cpu2/cpufreq/interactive/max_freq_hysteresis + echo 300000 > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq + echo 1 > /sys/devices/system/cpu/cpu2/cpufreq/interactive/ignore_hispeed_on_notif + # re-enable thermal and BCL hotplug + echo 1 > /sys/module/msm_thermal/core_control/enabled + echo -n disable > /sys/devices/soc/soc:qcom,bcl/mode + echo $bcl_hotplug_mask > /sys/devices/soc/soc:qcom,bcl/hotplug_mask + echo $bcl_soc_hotplug_mask > /sys/devices/soc/soc:qcom,bcl/hotplug_soc_mask + echo -n enable > /sys/devices/soc/soc:qcom,bcl/mode + # input boost configuration + echo "0:1324800 2:1324800" > /sys/module/cpu_boost/parameters/input_boost_freq + echo 40 > /sys/module/cpu_boost/parameters/input_boost_ms + # Setting b.L scheduler parameters + echo 0 > /proc/sys/kernel/sched_boost + echo 1 > /proc/sys/kernel/sched_migration_fixup + echo 45 > /proc/sys/kernel/sched_downmigrate + echo 45 > /proc/sys/kernel/sched_upmigrate + echo 400000 > /proc/sys/kernel/sched_freq_inc_notify + echo 400000 > /proc/sys/kernel/sched_freq_dec_notify + echo 3 > /proc/sys/kernel/sched_spill_nr_run + echo 100 > /proc/sys/kernel/sched_init_task_load + # Enable bus-dcvs + for cpubw in /sys/class/devfreq/*qcom,cpubw* + do + echo "bw_hwmon" > $cpubw/governor + echo 50 > $cpubw/polling_interval + echo 1525 > $cpubw/min_freq + echo "1525 5195 11863 13763" > $cpubw/bw_hwmon/mbps_zones + echo 4 > $cpubw/bw_hwmon/sample_ms + echo 34 > $cpubw/bw_hwmon/io_percent + echo 20 > $cpubw/bw_hwmon/hist_memory + echo 10 > $cpubw/bw_hwmon/hyst_length + echo 0 > $cpubw/bw_hwmon/low_power_ceil_mbps + echo 34 > $cpubw/bw_hwmon/low_power_io_percent + echo 20 > $cpubw/bw_hwmon/low_power_delay + echo 0 > $cpubw/bw_hwmon/guard_band_mbps + echo 250 > $cpubw/bw_hwmon/up_scale + echo 1600 > $cpubw/bw_hwmon/idle_mbps + done + + for memlat in /sys/class/devfreq/*qcom,memlat-cpu* + do + echo "mem_latency" > $memlat/governor + echo 10 > $memlat/polling_interval + done + echo "cpufreq" > /sys/class/devfreq/soc:qcom,mincpubw/governor + + soc_revision=`cat /sys/devices/soc0/revision` + if [ "$soc_revision" == "2.0" ]; then + #Disable suspend for v2.0 + echo pwr_dbg > /sys/power/wake_lock + elif [ "$soc_revision" == "2.1" ]; then + # Enable C4.D4.E4.M3 LPM modes + # Disable D3 state + echo 0 > /sys/module/lpm_levels/system/pwr/pwr-l2-gdhs/idle_enabled + echo 0 > /sys/module/lpm_levels/system/perf/perf-l2-gdhs/idle_enabled + # Disable DEF-FPC mode + echo N > /sys/module/lpm_levels/system/pwr/cpu0/fpc-def/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu1/fpc-def/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu2/fpc-def/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu3/fpc-def/idle_enabled + else + # Enable all LPMs by default + # This will enable C4, D4, D3, E4 and M3 LPMs + echo N > /sys/module/lpm_levels/parameters/sleep_disabled + fi + echo N > /sys/module/lpm_levels/parameters/sleep_disabled + # Starting io prefetcher service + start iop + + # Set Memory parameters + configure_memory_parameters + ;; +esac + +case "$target" in + "sdm845") + + # Set the default IRQ affinity to the silver cluster. When a + # CPU is isolated/hotplugged, the IRQ affinity is adjusted + # to one of the CPU from the default IRQ affinity mask. + echo f > /proc/irq/default_smp_affinity + + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + case "$soc_id" in + "321") #sdm845 + start_hbtp + ;; + esac + # Core control parameters + echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus + echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres + echo 30 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres + echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms + echo 1 > /sys/devices/system/cpu/cpu4/core_ctl/is_big_cluster + echo 4 > /sys/devices/system/cpu/cpu4/core_ctl/task_thres + + # Setting b.L scheduler parameters + echo 95 > /proc/sys/kernel/sched_upmigrate + echo 85 > /proc/sys/kernel/sched_downmigrate + echo 100 > /proc/sys/kernel/sched_group_upmigrate + echo 95 > /proc/sys/kernel/sched_group_downmigrate + echo 0 > /proc/sys/kernel/sched_select_prev_cpu_us + echo 400000 > /proc/sys/kernel/sched_freq_inc_notify + echo 400000 > /proc/sys/kernel/sched_freq_dec_notify + echo 5 > /proc/sys/kernel/sched_spill_nr_run + echo 1 > /proc/sys/kernel/sched_restrict_cluster_spill + + # configure governor settings for little cluster + echo "schedutil" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/schedutil/rate_limit_us + echo 1209600 > /sys/devices/system/cpu/cpu0/cpufreq/schedutil/hispeed_freq + + # configure governor settings for big cluster + echo "schedutil" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 0 > /sys/devices/system/cpu/cpu4/cpufreq/schedutil/rate_limit_us + echo 1574400 > /sys/devices/system/cpu/cpu4/cpufreq/schedutil/hispeed_freq + echo "0:1324800" > /sys/module/cpu_boost/parameters/input_boost_freq + echo 120 > /sys/module/cpu_boost/parameters/input_boost_ms + + # Enable bus-dcvs + for cpubw in /sys/class/devfreq/*qcom,cpubw* + do + echo "bw_hwmon" > $cpubw/governor + echo 50 > $cpubw/polling_interval + echo "2288 4577 6500 8132 9155 10681" > $cpubw/bw_hwmon/mbps_zones + echo 4 > $cpubw/bw_hwmon/sample_ms + echo 34 > $cpubw/bw_hwmon/io_percent + echo 20 > $cpubw/bw_hwmon/hist_memory + echo 10 > $cpubw/bw_hwmon/hyst_length + echo 0 > $cpubw/bw_hwmon/low_power_ceil_mbps + echo 34 > $cpubw/bw_hwmon/low_power_io_percent + echo 20 > $cpubw/bw_hwmon/low_power_delay + echo 0 > $cpubw/bw_hwmon/guard_band_mbps + echo 250 > $cpubw/bw_hwmon/up_scale + echo 1600 > $cpubw/bw_hwmon/idle_mbps + done + + for llccbw in /sys/class/devfreq/*qcom,llccbw* + do + echo "bw_hwmon" > $llccbw/governor + echo 50 > $llccbw/polling_interval + echo "1720 2929 4943 5931 6881" > $llccbw/bw_hwmon/mbps_zones + echo 4 > $llccbw/bw_hwmon/sample_ms + echo 68 > $llccbw/bw_hwmon/io_percent + echo 20 > $llccbw/bw_hwmon/hist_memory + echo 10 > $llccbw/bw_hwmon/hyst_length + echo 0 > $llccbw/bw_hwmon/low_power_ceil_mbps + echo 68 > $llccbw/bw_hwmon/low_power_io_percent + echo 20 > $llccbw/bw_hwmon/low_power_delay + echo 0 > $llccbw/bw_hwmon/guard_band_mbps + echo 250 > $llccbw/bw_hwmon/up_scale + echo 1600 > $llccbw/bw_hwmon/idle_mbps + done + + #Enable mem_latency governor for DDR scaling + for memlat in /sys/class/devfreq/*qcom,memlat-cpu* + do + echo "mem_latency" > $memlat/governor + echo 10 > $memlat/polling_interval + echo 400 > $memlat/mem_latency/ratio_ceil + done + + #Enable mem_latency governor for L3 scaling + for memlat in /sys/class/devfreq/*qcom,l3-cpu* + do + echo "mem_latency" > $memlat/governor + echo 10 > $memlat/polling_interval + echo 400 > $memlat/mem_latency/ratio_ceil + done + + #Gold L3 ratio ceil + echo 4000 > /sys/class/devfreq/soc:qcom,l3-cpu4/mem_latency/ratio_ceil + + echo "cpufreq" > /sys/class/devfreq/soc:qcom,mincpubw/governor + + # cpuset parameters + echo 0-3 > /dev/cpuset/background/cpus + echo 0-3 > /dev/cpuset/system-background/cpus + + # Turn off scheduler boost at the end + echo 0 > /proc/sys/kernel/sched_boost + # Disable CPU Retention + echo N > /sys/module/lpm_levels/L3/cpu0/ret/idle_enabled + echo N > /sys/module/lpm_levels/L3/cpu1/ret/idle_enabled + echo N > /sys/module/lpm_levels/L3/cpu2/ret/idle_enabled + echo N > /sys/module/lpm_levels/L3/cpu3/ret/idle_enabled + echo N > /sys/module/lpm_levels/L3/cpu4/ret/idle_enabled + echo N > /sys/module/lpm_levels/L3/cpu5/ret/idle_enabled + echo N > /sys/module/lpm_levels/L3/cpu6/ret/idle_enabled + echo N > /sys/module/lpm_levels/L3/cpu7/ret/idle_enabled + # Turn on sleep modes. + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + echo 100 > /proc/sys/vm/swappiness + ;; +esac + +case "$target" in + "msm8998" | "apq8098_latv") + + echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus + echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres + echo 30 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres + echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms + echo 1 > /sys/devices/system/cpu/cpu4/core_ctl/is_big_cluster + echo 4 > /sys/devices/system/cpu/cpu4/core_ctl/task_thres + + # Setting b.L scheduler parameters + echo 1 > /proc/sys/kernel/sched_migration_fixup + echo 95 > /proc/sys/kernel/sched_upmigrate + echo 90 > /proc/sys/kernel/sched_downmigrate + echo 100 > /proc/sys/kernel/sched_group_upmigrate + echo 95 > /proc/sys/kernel/sched_group_downmigrate + echo 0 > /proc/sys/kernel/sched_select_prev_cpu_us + echo 400000 > /proc/sys/kernel/sched_freq_inc_notify + echo 400000 > /proc/sys/kernel/sched_freq_dec_notify + echo 5 > /proc/sys/kernel/sched_spill_nr_run + echo 1 > /proc/sys/kernel/sched_restrict_cluster_spill + echo 1 > /proc/sys/kernel/sched_prefer_sync_wakee_to_waker + start iop + + # disable thermal bcl hotplug to switch governor + echo 0 > /sys/module/msm_thermal/core_control/enabled + + # online CPU0 + echo 1 > /sys/devices/system/cpu/cpu0/online + # configure governor settings for little cluster + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/use_migration_notif + echo 19000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/timer_rate + echo 1248000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/hispeed_freq + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/io_is_busy + echo "83 1804800:95" > /sys/devices/system/cpu/cpu0/cpufreq/interactive/target_loads + echo 19000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/min_sample_time + echo 79000 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/max_freq_hysteresis + echo 518400 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/interactive/ignore_hispeed_on_notif + # online CPU4 + echo 1 > /sys/devices/system/cpu/cpu4/online + # configure governor settings for big cluster + echo "interactive" > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_sched_load + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/use_migration_notif + echo 19000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/go_hispeed_load + echo 20000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/timer_rate + echo 1574400 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/hispeed_freq + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/io_is_busy + echo "83 1939200:90 2016000:95" > /sys/devices/system/cpu/cpu4/cpufreq/interactive/target_loads + echo 19000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/min_sample_time + echo 79000 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/max_freq_hysteresis + echo 806400 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq + echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/interactive/ignore_hispeed_on_notif + + # re-enable thermal and BCL hotplug + echo 1 > /sys/module/msm_thermal/core_control/enabled + + # Enable input boost configuration + echo "0:1324800" > /sys/module/cpu_boost/parameters/input_boost_freq + echo 40 > /sys/module/cpu_boost/parameters/input_boost_ms + # Enable bus-dcvs + for cpubw in /sys/class/devfreq/*qcom,cpubw* + do + echo "bw_hwmon" > $cpubw/governor + echo 50 > $cpubw/polling_interval + echo 1525 > $cpubw/min_freq + echo "3143 5859 11863 13763" > $cpubw/bw_hwmon/mbps_zones + echo 4 > $cpubw/bw_hwmon/sample_ms + echo 34 > $cpubw/bw_hwmon/io_percent + echo 20 > $cpubw/bw_hwmon/hist_memory + echo 10 > $cpubw/bw_hwmon/hyst_length + echo 0 > $cpubw/bw_hwmon/low_power_ceil_mbps + echo 34 > $cpubw/bw_hwmon/low_power_io_percent + echo 20 > $cpubw/bw_hwmon/low_power_delay + echo 0 > $cpubw/bw_hwmon/guard_band_mbps + echo 250 > $cpubw/bw_hwmon/up_scale + echo 1600 > $cpubw/bw_hwmon/idle_mbps + done + + for memlat in /sys/class/devfreq/*qcom,memlat-cpu* + do + echo "mem_latency" > $memlat/governor + echo 10 > $memlat/polling_interval + echo 400 > $memlat/mem_latency/ratio_ceil + done + echo "cpufreq" > /sys/class/devfreq/soc:qcom,mincpubw/governor + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + else + hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + + if [ -f /sys/devices/soc0/platform_version ]; then + platform_version=`cat /sys/devices/soc0/platform_version` + platform_major_version=$((10#${platform_version}>>16)) + fi + + if [ -f /sys/devices/soc0/platform_subtype_id ]; then + platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id` + fi + + case "$soc_id" in + "292") #msm8998 apq8098_latv + # Start Host based Touch processing + case "$hw_platform" in + "QRD") + case "$platform_subtype_id" in + "0") + start_hbtp + ;; + "16") + if [ $platform_major_version -lt 6 ]; then + start_hbtp + fi + ;; + esac + + ;; + esac + ;; + esac + + echo N > /sys/module/lpm_levels/system/pwr/cpu0/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu1/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu2/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/cpu3/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu4/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu5/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu6/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/cpu7/ret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/pwr-l2-dynret/idle_enabled + echo N > /sys/module/lpm_levels/system/pwr/pwr-l2-ret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/perf-l2-dynret/idle_enabled + echo N > /sys/module/lpm_levels/system/perf/perf-l2-ret/idle_enabled + echo N > /sys/module/lpm_levels/parameters/sleep_disabled + + echo 0-3 > /dev/cpuset/background/cpus + echo 0-3 > /dev/cpuset/system-background/cpus + echo 0 > /proc/sys/kernel/sched_boost + ;; +esac + +case "$target" in + "msm8909") + + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + # HMP scheduler settings for 8909 similiar to 8917 + echo 3 > /proc/sys/kernel/sched_window_stats_policy + echo 3 > /proc/sys/kernel/sched_ravg_hist_size + + echo 1 > /proc/sys/kernel/sched_restrict_tasks_spread + + echo 20 > /proc/sys/kernel/sched_small_task + echo 30 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_load + echo 30 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_load + + echo 3 > /sys/devices/system/cpu/cpu0/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu1/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu2/sched_mostly_idle_nr_run + echo 3 > /sys/devices/system/cpu/cpu3/sched_mostly_idle_nr_run + + echo 0 > /sys/devices/system/cpu/cpu0/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu1/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu2/sched_prefer_idle + echo 0 > /sys/devices/system/cpu/cpu3/sched_prefer_idle + + # Apply governor settings for 8909 + + # disable thermal core_control to update scaling_min_freq + echo 0 > /sys/module/msm_thermal/core_control/enabled + echo 1 > /sys/devices/system/cpu/cpu0/online + echo "interactive" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor + echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq + # enable thermal core_control now + echo 1 > /sys/module/msm_thermal/core_control/enabled + + echo "29000 1094400:49000" > /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay + echo 90 > /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load + echo 30000 > /sys/devices/system/cpu/cpufreq/interactive/timer_rate + echo 998400 > /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq + echo 0 > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy + echo "1 800000:85 998400:90 1094400:80" > /sys/devices/system/cpu/cpufreq/interactive/target_loads + echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/min_sample_time + echo 50000 > /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor + + # Bring up all cores online + echo 1 > /sys/devices/system/cpu/cpu1/online + echo 1 > /sys/devices/system/cpu/cpu2/online + echo 1 > /sys/devices/system/cpu/cpu3/online + echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled + + # Tune core control + echo 2 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus + max_freq=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq` + min_freq=800000 + echo $((min_freq*100 / max_freq)) $((min_freq*100 / max_freq)) $((66*1000000 / max_freq)) \ + $((55*1000000 / max_freq)) > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres + echo $((33*1000000 / max_freq)) > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres + echo 100 > /sys/devices/system/cpu/cpu0/core_ctl/offline_delay_ms + + for devfreq_gov in /sys/class/devfreq/*qcom,cpubw*/governor + do + echo "bw_hwmon" > $devfreq_gov + for cpu_bimc_bw_step in /sys/class/devfreq/*qcom,cpubw*/bw_hwmon/bw_step + do + echo 60 > $cpu_bimc_bw_step + done + for cpu_guard_band_mbps in /sys/class/devfreq/*qcom,cpubw*/bw_hwmon/guard_band_mbps + do + echo 30 > $cpu_guard_band_mbps + done + done + + for gpu_bimc_io_percent in /sys/class/devfreq/*qcom,gpubw*/bw_hwmon/io_percent + do + echo 40 > $gpu_bimc_io_percent + done + for gpu_bimc_bw_step in /sys/class/devfreq/*qcom,gpubw*/bw_hwmon/bw_step + do + echo 60 > $gpu_bimc_bw_step + done + for gpu_bimc_guard_band_mbps in /sys/class/devfreq/*qcom,gpubw*/bw_hwmon/guard_band_mbps + do + echo 30 > $gpu_bimc_guard_band_mbps + done + + # Set Memory parameters + configure_memory_parameters + ;; +esac + +case "$target" in + "msm7627_ffa" | "msm7627_surf" | "msm7627_6x") + echo 25000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + ;; +esac + +case "$target" in + "qsd8250_surf" | "qsd8250_ffa" | "qsd8650a_st1x") + echo 50000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + ;; +esac + +case "$target" in + "qsd8650a_st1x") + mount -t debugfs none /sys/kernel/debug + ;; +esac + +chown -h system /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate +chown -h system /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor +chown -h system /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy + +emmc_boot=`getprop ro.boot.emmc` +case "$emmc_boot" + in "true") + chown -h system /sys/devices/platform/rs300000a7.65536/force_sync + chown -h system /sys/devices/platform/rs300000a7.65536/sync_sts + chown -h system /sys/devices/platform/rs300100a7.65536/force_sync + chown -h system /sys/devices/platform/rs300100a7.65536/sync_sts + ;; +esac + +case "$target" in + "msm8960" | "msm8660" | "msm7630_surf") + echo 10 > /sys/devices/platform/msm_sdcc.3/idle_timeout + ;; + "msm7627a") + echo 10 > /sys/devices/platform/msm_sdcc.1/idle_timeout + ;; +esac + +# Post-setup services +case "$target" in + "msm8660" | "msm8960" | "msm8226" | "msm8610" | "mpq8092" ) + start mpdecision + ;; + "msm8916") + setprop sys.post_boot.parsed 1 + + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + case $soc_id in + "239" | "241" | "263" | "268" | "269" | "270" | "271") + setprop ro.min_freq_0 960000 + setprop ro.min_freq_4 800000 + ;; + "206" | "247" | "248" | "249" | "250" | "233" | "240" | "242") + setprop ro.min_freq_0 800000 + ;; + esac + ;; + "msm8909") + echo 128 > /sys/block/mmcblk0/bdi/read_ahead_kb + echo 128 > /sys/block/mmcblk0/queue/read_ahead_kb + echo 128 > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb + echo 128 > /sys/block/mmcblk0rpmb/queue/read_ahead_kb + setprop sys.post_boot.parsed 1 + ;; + "msm8952") + echo 128 > /sys/block/mmcblk0/bdi/read_ahead_kb + echo 128 > /sys/block/mmcblk0/queue/read_ahead_kb + echo 128 > /sys/block/dm-0/queue/read_ahead_kb + echo 128 > /sys/block/dm-1/queue/read_ahead_kb + echo 128 > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb + echo 128 > /sys/block/mmcblk0rpmb/queue/read_ahead_kb + setprop sys.post_boot.parsed 1 + ;; + "msm8937" | "msm8953") + echo 128 > /sys/block/mmcblk0/bdi/read_ahead_kb + echo 128 > /sys/block/mmcblk0/queue/read_ahead_kb + echo 128 > /sys/block/dm-0/queue/read_ahead_kb + echo 128 > /sys/block/dm-1/queue/read_ahead_kb + echo 128 > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb + echo 128 > /sys/block/mmcblk0rpmb/queue/read_ahead_kb + setprop sys.post_boot.parsed 1 + + low_ram_enable=`getprop ro.config.low_ram` + + if [ "$low_ram_enable" != "true" ]; then + start gamed + fi + ;; + "msm8974") + start mpdecision + echo 512 > /sys/block/mmcblk0/bdi/read_ahead_kb + ;; + "msm8994" | "msm8992" | "msm8996" | "msm8998" | "sdm660" | "apq8098_latv" | "sdm845") + setprop sys.post_boot.parsed 1 + ;; + "apq8084") + rm /data/system/perfd/default_values + start mpdecision + echo 512 > /sys/block/mmcblk0/bdi/read_ahead_kb + echo 512 > /sys/block/sda/bdi/read_ahead_kb + echo 512 > /sys/block/sdb/bdi/read_ahead_kb + echo 512 > /sys/block/sdc/bdi/read_ahead_kb + echo 512 > /sys/block/sdd/bdi/read_ahead_kb + echo 512 > /sys/block/sde/bdi/read_ahead_kb + echo 512 > /sys/block/sdf/bdi/read_ahead_kb + echo 512 > /sys/block/sdg/bdi/read_ahead_kb + echo 512 > /sys/block/sdh/bdi/read_ahead_kb + ;; + "msm7627a") + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + case "$soc_id" in + "127" | "128" | "129") + start mpdecision + ;; + esac + ;; +esac + +# Enable Power modes and set the CPU Freq Sampling rates +case "$target" in + "msm7627a") + start qosmgrd + echo 1 > /sys/module/pm2/modes/cpu0/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/pm2/modes/cpu1/standalone_power_collapse/idle_enabled + echo 1 > /sys/module/pm2/modes/cpu0/standalone_power_collapse/suspend_enabled + echo 1 > /sys/module/pm2/modes/cpu1/standalone_power_collapse/suspend_enabled + #SuspendPC: + echo 1 > /sys/module/pm2/modes/cpu0/power_collapse/suspend_enabled + #IdlePC: + echo 1 > /sys/module/pm2/modes/cpu0/power_collapse/idle_enabled + echo 25000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate + ;; +esac + +# Change adj level and min_free_kbytes setting for lowmemory killer to kick in +case "$target" in + "msm7627a") + echo 0,1,2,4,9,12 > /sys/module/lowmemorykiller/parameters/adj + echo 5120 > /proc/sys/vm/min_free_kbytes + ;; +esac + +# Install AdrenoTest.apk if not already installed +if [ -f /data/prebuilt/AdrenoTest.apk ]; then + if [ ! -d /data/data/com.qualcomm.adrenotest ]; then + pm install /data/prebuilt/AdrenoTest.apk + fi +fi + +# Install SWE_Browser.apk if not already installed +if [ -f /data/prebuilt/SWE_AndroidBrowser.apk ]; then + if [ ! -d /data/data/com.android.swe.browser ]; then + pm install /data/prebuilt/SWE_AndroidBrowser.apk + fi +fi + +# Change adj level and min_free_kbytes setting for lowmemory killer to kick in +case "$target" in + "msm8660") + start qosmgrd + echo 0,1,2,4,9,12 > /sys/module/lowmemorykiller/parameters/adj + echo 5120 > /proc/sys/vm/min_free_kbytes + ;; +esac + +# Let kernel know our image version/variant/crm_version +if [ -f /sys/devices/soc0/select_image ]; then + image_version="10:" + image_version+=`getprop ro.build.id` + image_version+=":" + image_version+=`getprop ro.build.version.incremental` + image_variant=`getprop ro.product.name` + image_variant+="-" + image_variant+=`getprop ro.build.type` + oem_version=`getprop ro.build.version.codename` + echo 10 > /sys/devices/soc0/select_image + echo $image_version > /sys/devices/soc0/image_version + echo $image_variant > /sys/devices/soc0/image_variant + echo $oem_version > /sys/devices/soc0/image_crm_version +fi + +# Change console log level as per console config property +console_config=`getprop persist.console.silent.config` +case "$console_config" in + "1") + echo "Enable console config to $console_config" + echo 0 > /proc/sys/kernel/printk + ;; + *) + echo "Enable console config to $console_config" + ;; +esac + +# Parse misc partition path and set property +misc_link=$(ls -l /dev/block/bootdevice/by-name/misc) +real_path=${misc_link##*>} +setprop persist.vendor.mmi.misc_dev_path $real_path + diff --git a/rootdir/bin/init.qcom.sdio.sh b/rootdir/bin/init.qcom.sdio.sh new file mode 100755 index 0000000..df77745 --- /dev/null +++ b/rootdir/bin/init.qcom.sdio.sh @@ -0,0 +1,78 @@ +#! /vendor/bin/sh + +# Copyright (c) 2010, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of The Linux Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +# For successful WLAN card detection, WLAN needs SDIO polling turned on. +# This script can be used to turn on/off SDIO polling on appropriate +# SDIO slot on the MSM target (e.g. slot 3 on 7x30 surf). + +arg=$1 +target=`getprop ro.board.platform` + +case "$target" in + "msm7627_6x") + echo 1 > /sys/devices/platform/msm_sdcc.1/polling + echo 1 > /sys/devices/platform/msm_sdcc.2/polling + ;; + + "msm7627_ffa") + echo 1 > /sys/devices/platform/msm_sdcc.2/polling + ;; + + "msm7627_surf") + echo 1 > /sys/devices/platform/msm_sdcc.1/polling + echo 1 > /sys/devices/platform/msm_sdcc.2/polling + ;; + + "msm7627a") + echo 1 > /sys/devices/platform/msm_sdcc.2/polling + ;; + + "msm7630_surf") + echo 1 > /sys/devices/platform/msm_sdcc.3/polling + ;; + + "msm7630_1x") + echo 1 > /sys/devices/platform/msm_sdcc.3/polling + ;; + + "msm7630_fusion") + echo 1 > /sys/devices/platform/msm_sdcc.3/polling + ;; + + "msm8660") + echo 1 > /sys/devices/platform/msm_sdcc.4/polling + ;; + + "msm8660_csfb") + echo 1 > /sys/devices/platform/msm_sdcc.4/polling + ;; +esac + +exit 0 diff --git a/rootdir/bin/init.qcom.sensors.sh b/rootdir/bin/init.qcom.sensors.sh new file mode 100755 index 0000000..fd193e2 --- /dev/null +++ b/rootdir/bin/init.qcom.sensors.sh @@ -0,0 +1,43 @@ +#!/vendor/bin/sh +# Copyright (c) 2015, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +# +# Function to start sensors for SSC enabled platforms +# +start_sensors() +{ + if [ -c /dev/msm_dsps -o -c /dev/sensors ]; then + chmod -h 775 /persist/sensors + chmod -h 664 /persist/sensors/sensors_settings + mkdir -p /persist/sensors/registry/registry + chown -h system.root /persist/sensors/sensors_settings + start sensors + fi +} + +start_sensors diff --git a/rootdir/bin/init.qcom.sh b/rootdir/bin/init.qcom.sh new file mode 100755 index 0000000..fc1f560 --- /dev/null +++ b/rootdir/bin/init.qcom.sh @@ -0,0 +1,470 @@ +#! /vendor/bin/sh + +# Copyright (c) 2009-2016, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +target=`getprop ro.board.platform` +if [ -f /sys/devices/soc0/soc_id ]; then + platformid=`cat /sys/devices/soc0/soc_id` +else + platformid=`cat /sys/devices/system/soc/soc0/id` +fi + +start_battery_monitor() +{ + if ls /sys/bus/spmi/devices/qpnp-bms-*/fcc_data ; then + chown -h root.system /sys/module/pm8921_bms/parameters/* + chown -h root.system /sys/module/qpnp_bms/parameters/* + chown -h root.system /sys/bus/spmi/devices/qpnp-bms-*/fcc_data + chown -h root.system /sys/bus/spmi/devices/qpnp-bms-*/fcc_temp + chown -h root.system /sys/bus/spmi/devices/qpnp-bms-*/fcc_chgcyl + chmod 0660 /sys/module/qpnp_bms/parameters/* + chmod 0660 /sys/module/pm8921_bms/parameters/* + mkdir -p /data/bms + chown -h root.system /data/bms + chmod 0770 /data/bms + start battery_monitor + fi +} + +start_charger_monitor() +{ + if ls /sys/module/qpnp_charger/parameters/charger_monitor; then + chown -h root.system /sys/module/qpnp_charger/parameters/* + chown -h root.system /sys/class/power_supply/battery/input_current_max + chown -h root.system /sys/class/power_supply/battery/input_current_trim + chown -h root.system /sys/class/power_supply/battery/input_current_settled + chown -h root.system /sys/class/power_supply/battery/voltage_min + chmod 0664 /sys/class/power_supply/battery/input_current_max + chmod 0664 /sys/class/power_supply/battery/input_current_trim + chmod 0664 /sys/class/power_supply/battery/input_current_settled + chmod 0664 /sys/class/power_supply/battery/voltage_min + chmod 0664 /sys/module/qpnp_charger/parameters/charger_monitor + start charger_monitor + fi +} + +start_vm_bms() +{ + if [ -e /dev/vm_bms ]; then + chown -h root.system /sys/class/power_supply/bms/current_now + chown -h root.system /sys/class/power_supply/bms/voltage_ocv + chmod 0664 /sys/class/power_supply/bms/current_now + chmod 0664 /sys/class/power_supply/bms/voltage_ocv + start vm_bms + fi +} + +start_msm_irqbalance_8939() +{ + if [ -f /system/vendor/bin/msm_irqbalance ]; then + case "$platformid" in + "239" | "293" | "294" | "295" | "304" | "313") + start vendor.msm_irqbalance;; + esac + fi +} + +start_msm_irqbalance_8952() +{ + if [ -f /system/vendor/bin/msm_irqbalance ]; then + case "$platformid" in + "241" | "263" | "264" | "268" | "269" | "270" | "271") + start vendor.msm_irqbalance;; + esac + case "$platformid" in + "266" | "274" | "277" | "278") + start vendor.msm_irqbal_lb;; + esac + fi +} + +start_msm_irqbalance660() +{ + if [ -f /vendor/bin/msm_irqbalance ]; then + case "$platformid" in + "317" | "324" | "325" | "326" | "345" | "346") + start vendor.msm_irqbalance;; + "318" | "327") + start vendor.msm_irqbl_sdm630;; + esac + fi +} + +start_msm_irqbalance() +{ + if [ -f /vendor/bin/msm_irqbalance ]; then + start vendor.msm_irqbalance + fi +} + +start_copying_prebuilt_qcril_db() +{ + if [ -f /vendor/radio/qcril_database/qcril.db -a ! -f /data/vendor/radio/qcril.db ]; then + cp /vendor/radio/qcril_database/qcril.db /data/vendor/radio/qcril.db + chown -h radio.radio /data/vendor/radio/qcril.db + fi +} + +baseband=`getprop ro.baseband` +echo 1 > /proc/sys/net/ipv6/conf/default/accept_ra_defrtr + +case "$baseband" in + "svlte2a") + start bridgemgrd + ;; +esac + +case "$target" in + "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") + if [ -f /sys/devices/soc0/hw_platform ]; then + value=`cat /sys/devices/soc0/hw_platform` + else + value=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + case "$value" in + "Fluid") + start profiler_daemon;; + esac + ;; + "msm8660" ) + if [ -f /sys/devices/soc0/hw_platform ]; then + platformvalue=`cat /sys/devices/soc0/hw_platform` + else + platformvalue=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + case "$platformvalue" in + "Fluid") + start profiler_daemon;; + esac + ;; + "msm8960") + case "$baseband" in + "msm") + start_battery_monitor;; + esac + + if [ -f /sys/devices/soc0/hw_platform ]; then + platformvalue=`cat /sys/devices/soc0/hw_platform` + else + platformvalue=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + case "$platformvalue" in + "Fluid") + start profiler_daemon;; + "Liquid") + start profiler_daemon;; + esac + ;; + "msm8974") + platformvalue=`cat /sys/devices/soc0/hw_platform` + case "$platformvalue" in + "Fluid") + start profiler_daemon;; + "Liquid") + start profiler_daemon;; + esac + case "$baseband" in + "msm") + start_battery_monitor + ;; + esac + start_charger_monitor + ;; + "sdm660") + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + else + hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + + case "$soc_id" in + "317" | "324" | "325" | "326" | "318" | "327" ) + case "$hw_platform" in + "Surf") + setprop qemu.hw.mainkeys 0 + ;; + "MTP") + setprop qemu.hw.mainkeys 0 + ;; + "RCM") + setprop qemu.hw.mainkeys 0 + ;; + "QRD") + setprop qemu.hw.mainkeys 0 + ;; + esac + ;; + esac + start_msm_irqbalance660 + ;; + "apq8084") + platformvalue=`cat /sys/devices/soc0/hw_platform` + case "$platformvalue" in + "Fluid") + start profiler_daemon;; + "Liquid") + start profiler_daemon;; + esac + ;; + "msm8226") + start_charger_monitor + ;; + "msm8610") + start_charger_monitor + ;; + "msm8916") + start_vm_bms + start_msm_irqbalance_8939 + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + if [ -f /sys/devices/soc0/platform_subtype_id ]; then + platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id` + fi + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + fi + case "$soc_id" in + "239") + case "$hw_platform" in + "Surf") + case "$platform_subtype_id" in + "1") + setprop qemu.hw.mainkeys 0 + ;; + esac + ;; + "MTP") + case "$platform_subtype_id" in + "3") + setprop qemu.hw.mainkeys 0 + ;; + esac + ;; + esac + ;; + esac + ;; + "msm8994" | "msm8992" | "msm8998" | "apq8098_latv" | "sdm845") + start_msm_irqbalance + ;; + "msm8996") + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + fi + case "$hw_platform" in + "MTP" | "CDP") + #Loop through the sysfs nodes and determine the correct sysfs to change the permission and ownership. + for count in 0 1 2 3 4 5 6 7 8 9 10 + do + dir="/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input"$count + if [ -d "$dir" ]; then + chmod 0660 $dir/secure_touch_enable + chmod 0440 $dir/secure_touch + chown system.drmrpc $dir/secure_touch_enable + chown system.drmrpc $dir/secure_touch + break + fi + done + ;; + esac + ;; + "msm8909") + start_vm_bms + ;; + "msm8952") + start_msm_irqbalance_8952 + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + if [ -f /sys/devices/soc0/platform_subtype_id ]; then + platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id` + fi + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + fi + case "$soc_id" in + "264") + case "$hw_platform" in + "Surf") + case "$platform_subtype_id" in + "1" | "2") + setprop qemu.hw.mainkeys 0 + ;; + esac + ;; + "MTP") + case "$platform_subtype_id" in + "3") + setprop qemu.hw.mainkeys 0 + ;; + esac + ;; + "QRD") + case "$platform_subtype_id" in + "0") + setprop qemu.hw.mainkeys 0 + ;; + esac + ;; + esac + ;; + "266" | "274" | "277" | "278") + case "$hw_platform" in + "Surf" | "RCM") + if [ $panel_xres -eq 1440 ]; then + setprop qemu.hw.mainkeys 0 + fi + ;; + "MTP" | "QRD") + setprop qemu.hw.mainkeys 0 + ;; + esac + ;; + esac + ;; + "msm8937") + start_msm_irqbalance_8939 + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + else + hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + case "$soc_id" in + "294" | "295" | "303" | "307" | "308" | "309" | "313" | "320") + case "$hw_platform" in + "Surf") + setprop qemu.hw.mainkeys 0 + ;; + "MTP") + setprop qemu.hw.mainkeys 0 + ;; + "RCM") + setprop qemu.hw.mainkeys 0 + ;; + "QRD") + setprop qemu.hw.mainkeys 0 + ;; + esac + ;; + esac + ;; + "msm8953") + start_msm_irqbalance_8939 + if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` + else + soc_id=`cat /sys/devices/system/soc/soc0/id` + fi + + if [ -f /sys/devices/soc0/hw_platform ]; then + hw_platform=`cat /sys/devices/soc0/hw_platform` + else + hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform` + fi + case "$soc_id" in + "293" | "304" | "338" | "351" ) + case "$hw_platform" in + "Surf") + setprop qemu.hw.mainkeys 0 + ;; + "MTP") + setprop qemu.hw.mainkeys 0 + ;; + "RCM") + setprop qemu.hw.mainkeys 0 + ;; + "QRD") + setprop qemu.hw.mainkeys 0 + ;; + esac + ;; + esac + ;; +esac + +# +# Copy qcril.db if needed for RIL +# +start_copying_prebuilt_qcril_db +echo 1 > /data/vendor/radio/db_check_done + +# +# Make modem config folder and copy firmware config to that folder for RIL +# +if [ -f /data/vendor/radio/ver_info.txt ]; then + prev_version_info=`cat /data/vendor/radio/ver_info.txt` +else + prev_version_info="" +fi + +cur_version_info=`cat /firmware/verinfo/ver_info.txt` +if [ ! -f /firmware/verinfo/ver_info.txt -o "$prev_version_info" != "$cur_version_info" ]; then + rm -rf /data/vendor/radio/modem_config + mkdir /data/vendor/radio/modem_config + chmod 770 /data/vendor/radio/modem_config + cp -r /firmware/image/modem_pr/mcfg/configs/* /data/vendor/radio/modem_config + chown -hR radio.radio /data/vendor/radio/modem_config + cp /firmware/verinfo/ver_info.txt /data/vendor/radio/ver_info.txt + chown radio.radio /data/vendor/radio/ver_info.txt +fi +cp /firmware/image/modem_pr/mbn_ota.txt /data/vendor/radio/modem_config +chown radio.radio /data/vendor/radio/modem_config/mbn_ota.txt +echo 1 > /data/vendor/radio/copy_complete + +#check build variant for printk logging +#current default minimum boot-time-default +buildvariant=`getprop ro.build.type` +case "$buildvariant" in + "userdebug" | "eng") + #set default loglevel to KERN_INFO + echo "6 6 1 7" > /proc/sys/kernel/printk + ;; + *) + #set default loglevel to KERN_WARNING + echo "4 4 1 4" > /proc/sys/kernel/printk + ;; +esac diff --git a/rootdir/bin/init.qcom.syspart_fixup.sh b/rootdir/bin/init.qcom.syspart_fixup.sh new file mode 100755 index 0000000..38d00f1 --- /dev/null +++ b/rootdir/bin/init.qcom.syspart_fixup.sh @@ -0,0 +1,80 @@ +#! /vendor/bin/sh + +# Copyright (c) 2012, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +target="$1" +serial="$2" + +# No path is set up at this point so we have to do it here. +PATH=/sbin:/system/sbin:/system/bin:/system/xbin +export PATH + +mount_needed=false; + +if [ ! -f /system/etc/boot_fixup ];then +# This should be the first command +# remount system as read-write. + mount -o rw,remount,barrier=1 /system + mount_needed=true; +fi + +# **** WARNING ***** +# This runs in a single-threaded, critical path portion +# of the Android bootup sequence. This is to guarantee +# all necessary system partition fixups are done before +# the rest of the system starts up. Run any non- +# timing critical tasks in a separate process to +# prevent slowdown at boot. + +# Run modem link script +if [ -f /system/etc/init.qcom.modem_links.sh ]; then + /system/vendor/bin/init.qcom.modem_links.sh +fi + +# Run mdm link script +if [ -f /system/etc/init.qcom.mdm_links.sh ]; then + /system/vendor/bin/init.qcom.mdm_links.sh +fi + +# Run wifi script +if [ -f /vendor/bin/init.qcom.wifi.sh ]; then + /vendor/bin/init.qcom.wifi.sh "$target" "$serial" +fi + +# Run the sensor script +if [ -f /system/etc/init.qcom.sensor.sh ]; then + /system/vendor/bin/init.qcom.sensor.sh +fi + +touch /system/etc/boot_fixup + +if $mount_needed ;then +# This should be the last command +# remount system as read-only. + mount -o ro,remount,barrier=1 /system +fi diff --git a/rootdir/bin/init.qcom.usb.sh b/rootdir/bin/init.qcom.usb.sh new file mode 100755 index 0000000..9bd8ca2 --- /dev/null +++ b/rootdir/bin/init.qcom.usb.sh @@ -0,0 +1,291 @@ +#!/vendor/bin/sh +# Copyright (c) 2012-2017, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of The Linux Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# +chown -h root.system /sys/devices/platform/msm_hsusb/gadget/wakeup +chmod -h 220 /sys/devices/platform/msm_hsusb/gadget/wakeup + +# Set platform variables +if [ -f /sys/devices/soc0/hw_platform ]; then + soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null +else + soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null +fi + +if [ -f /sys/devices/soc0/machine ]; then + soc_machine=`cat /sys/devices/soc0/machine` 2> /dev/null +else + soc_machine=`cat /sys/devices/system/soc/soc0/machine` 2> /dev/null +fi + +# Get hardware revision +if [ -f /sys/devices/soc0/revision ]; then + soc_revision=`cat /sys/devices/soc0/revision` 2> /dev/null +else + soc_revision=`cat /sys/devices/system/soc/soc0/revision` 2> /dev/null +fi + +# +# Allow persistent usb charging disabling +# User needs to set usb charging disabled in persist.usb.chgdisabled +# +target=`getprop ro.board.platform` +usbchgdisabled=`getprop persist.usb.chgdisabled` +case "$usbchgdisabled" in + "") ;; #Do nothing here + * ) + case $target in + "msm8660") + echo "$usbchgdisabled" > /sys/module/pmic8058_charger/parameters/disabled + echo "$usbchgdisabled" > /sys/module/smb137b/parameters/disabled + ;; + "msm8960") + echo "$usbchgdisabled" > /sys/module/pm8921_charger/parameters/disabled + ;; + esac +esac + +usbcurrentlimit=`getprop persist.usb.currentlimit` +case "$usbcurrentlimit" in + "") ;; #Do nothing here + * ) + case $target in + "msm8960") + echo "$usbcurrentlimit" > /sys/module/pm8921_charger/parameters/usb_max_current + ;; + esac +esac + +# +# Check ESOC for external MDM +# +# Note: currently only a single MDM is supported +# +if [ -d /sys/bus/esoc/devices ]; then +for f in /sys/bus/esoc/devices/*; do + if [ -d $f ]; then + if [ `grep "^MDM" $f/esoc_name` ]; then + esoc_link=`cat $f/esoc_link` + break + fi + fi +done +fi + +target=`getprop ro.board.platform` + +# soc_ids for 8937 +if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` +else + soc_id=`cat /sys/devices/system/soc/soc0/id` +fi + +# +# Allow USB enumeration with default PID/VID +# +baseband=`getprop ro.baseband` + +echo 1 > /sys/class/android_usb/f_mass_storage/lun/nofua + +# set USB controller's device node +case "$target" in + "msm8996") + setprop sys.usb.controller "6a00000.dwc3" + setprop sys.usb.rndis.func.name "rndis_bam" + setprop sys.usb.rmnet.func.name "rmnet_bam" + ;; + "msm8998" | "apq8098_latv") + setprop sys.usb.controller "a800000.dwc3" + setprop sys.usb.rndis.func.name "gsi" + setprop sys.usb.rmnet.func.name "gsi" + ;; + "sdm660") + setprop sys.usb.controller "a800000.dwc3" + setprop sys.usb.rndis.func.name "rndis_bam" + setprop sys.usb.rmnet.func.name "rmnet_bam" + echo 15916 > /sys/module/usb_f_qcrndis/parameters/rndis_dl_max_xfer_size + ;; + "sdm845") + setprop sys.usb.controller "a600000.dwc3" + setprop sys.usb.rndis.func.name "gsi" + setprop sys.usb.rmnet.func.name "gsi" + ;; + *) + ;; +esac + +# check configfs is mounted or not +if [ -d /config/usb_gadget ]; then + msm_serial=`cat /sys/devices/soc0/serial_number`; + msm_serial_hex=`printf %08X $msm_serial` + + # ADB requires valid iSerialNumber; if ro.serialno is missing, use dummy + serialnumber=`cat /config/usb_gadget/g1/strings/0x409/serialnumber` 2> /dev/null + if [ "$serialnumber" == "" ]; then + serialno=1234567 + echo $serialno > /config/usb_gadget/g1/strings/0x409/serialnumber + fi + + persist_comp=`getprop persist.sys.usb.config` + comp=`getprop sys.usb.config` + echo $persist_comp + echo $comp + if [ "$comp" != "$persist_comp" ]; then + echo "setting sys.usb.config" + setprop sys.usb.config $persist_comp + fi + + setprop sys.usb.configfs 1 +else + persist_comp=`getprop persist.sys.usb.config` + comp=`getprop sys.usb.config` + echo $persist_comp + echo $comp + if [ "$comp" != "$persist_comp" ]; then + echo "setting sys.usb.config" + setprop sys.usb.config $persist_comp + fi +fi + +# +# Do target specific things +# +case "$target" in + "msm8974") +# Select USB BAM - 2.0 or 3.0 + echo ssusb > /sys/bus/platform/devices/usb_bam/enable + ;; + "apq8084") + if [ "$baseband" == "apq" ]; then + echo "msm_hsic_host" > /sys/bus/platform/drivers/xhci_msm_hsic/unbind + fi + ;; + "msm8226") + if [ -e /sys/bus/platform/drivers/msm_hsic_host ]; then + if [ ! -L /sys/bus/usb/devices/1-1 ]; then + echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind + fi + fi + ;; + "msm8994" | "msm8992" | "msm8996" | "msm8953") + echo BAM2BAM_IPA > /sys/class/android_usb/android0/f_rndis_qc/rndis_transports + echo 131072 > /sys/module/g_android/parameters/mtp_tx_req_len + echo 131072 > /sys/module/g_android/parameters/mtp_rx_req_len + ;; + "msm8937") + case "$soc_id" in + "313" | "320") + echo BAM2BAM_IPA > /sys/class/android_usb/android0/f_rndis_qc/rndis_transports + ;; + esac + ;; +esac + +# +# set module params for embedded rmnet devices +# +rmnetmux=`getprop persist.rmnet.mux` +case "$baseband" in + "mdm" | "dsda" | "sglte2") + case "$rmnetmux" in + "enabled") + echo 1 > /sys/module/rmnet_usb/parameters/mux_enabled + echo 8 > /sys/module/rmnet_usb/parameters/no_fwd_rmnet_links + echo 17 > /sys/module/rmnet_usb/parameters/no_rmnet_insts_per_dev + ;; + esac + echo 1 > /sys/module/rmnet_usb/parameters/rmnet_data_init + # Allow QMUX daemon to assign port open wait time + chown -h radio.radio /sys/devices/virtual/hsicctl/hsicctl0/modem_wait + ;; + "dsda2") + echo 2 > /sys/module/rmnet_usb/parameters/no_rmnet_devs + echo hsicctl,hsusbctl > /sys/module/rmnet_usb/parameters/rmnet_dev_names + case "$rmnetmux" in + "enabled") #mux is neabled on both mdms + echo 3 > /sys/module/rmnet_usb/parameters/mux_enabled + echo 8 > /sys/module/rmnet_usb/parameters/no_fwd_rmnet_links + echo 17 > write /sys/module/rmnet_usb/parameters/no_rmnet_insts_per_dev + ;; + "enabled_hsic") #mux is enabled on hsic mdm + echo 1 > /sys/module/rmnet_usb/parameters/mux_enabled + echo 8 > /sys/module/rmnet_usb/parameters/no_fwd_rmnet_links + echo 17 > /sys/module/rmnet_usb/parameters/no_rmnet_insts_per_dev + ;; + "enabled_hsusb") #mux is enabled on hsusb mdm + echo 2 > /sys/module/rmnet_usb/parameters/mux_enabled + echo 8 > /sys/module/rmnet_usb/parameters/no_fwd_rmnet_links + echo 17 > /sys/module/rmnet_usb/parameters/no_rmnet_insts_per_dev + ;; + esac + echo 1 > /sys/module/rmnet_usb/parameters/rmnet_data_init + # Allow QMUX daemon to assign port open wait time + chown -h radio.radio /sys/devices/virtual/hsicctl/hsicctl0/modem_wait + ;; +esac + +# +# Add support for exposing lun0 as cdrom in mass-storage +# +cdromname="/system/etc/cdrom_install.iso" +platformver=`cat /sys/devices/soc0/hw_platform` +case "$target" in + "msm8226" | "msm8610" | "msm8916") + case $platformver in + "QRD") + echo "mounting usbcdrom lun" + echo $cdromname > /sys/class/android_usb/android0/f_mass_storage/rom/file + chmod 0444 /sys/class/android_usb/android0/f_mass_storage/rom/file + ;; + esac + ;; +esac + +# +# Initialize RNDIS Diag option. If unset, set it to 'none'. +# +diag_extra=`getprop persist.sys.usb.config.extra` +if [ "$diag_extra" == "" ]; then + setprop persist.sys.usb.config.extra none +fi + +# soc_ids for 8937 +if [ -f /sys/devices/soc0/soc_id ]; then + soc_id=`cat /sys/devices/soc0/soc_id` +else + soc_id=`cat /sys/devices/system/soc/soc0/id` +fi + +# enable rps cpus on msm8937 target +setprop sys.usb.rps_mask 0 +case "$soc_id" in + "294" | "295") + setprop sys.usb.rps_mask 40 + ;; +esac diff --git a/rootdir/bin/init.qcom.wifi.sh b/rootdir/bin/init.qcom.wifi.sh new file mode 100755 index 0000000..d8bb2d3 --- /dev/null +++ b/rootdir/bin/init.qcom.wifi.sh @@ -0,0 +1,505 @@ +#! /vendor/bin/sh + +# Copyright (c) 2010-2013, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of The Linux Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# This script will load and unload the wifi driver to put the wifi in +# in deep sleep mode so that there won't be voltage leakage. +# Loading/Unloading the driver only incase if the Wifi GUI is not going +# to Turn ON the Wifi. In the Script if the wlan driver status is +# ok(GUI loaded the driver) or loading(GUI is loading the driver) then +# the script won't do anything. Otherwise (GUI is not going to Turn On +# the Wifi) the script will load/unload the driver +# This script will get called after post bootup. + +target="$1" +serialno="$2" + +btsoc="" + +# No path is set up at this point so we have to do it here. +PATH=/sbin:/system/sbin:/system/bin:/system/xbin +export PATH + +# Trigger WCNSS platform driver +trigger_wcnss() +{ + # We need to trigger WCNSS platform driver, WCNSS driver + # will export a file which we must touch so that the + # driver knows that userspace is ready to handle firmware + # download requests. + + # See if an appropriately named device file is present + wcnssnode=`ls /dev/wcnss*` + case "$wcnssnode" in + *wcnss*) + # Before triggering wcnss, let it know that + # caldata is available at userspace. + if [ -e /data/misc/wifi/WCNSS_qcom_wlan_cal.bin ]; then + calparm=`ls /sys/module/wcnsscore/parameters/has_calibrated_data` + if [ -e $calparm ] && [ ! -e /data/misc/wifi/WCN_FACTORY ]; then + echo 1 > $calparm + fi + fi + # There is a device file. Write to the file + # so that the driver knows userspace is + # available for firmware download requests + echo 1 > $wcnssnode + ;; + + *) + # There is not a device file present, so + # the driver must not be available + echo "No WCNSS device node detected" + ;; + esac + + # Plumb down the device serial number + if [ -f /sys/devices/*wcnss-wlan/serial_number ]; then + cd /sys/devices/*wcnss-wlan + echo $serialno > serial_number + cd / + elif [ -f /sys/devices/platform/wcnss_wlan.0/serial_number ]; then + echo $serialno > /sys/devices/platform/wcnss_wlan.0/serial_number + fi +} + + +case "$target" in + msm8974* | msm8226* | msm8610*) + +# Check whether device is plugged on the HSIC bus +# Currently HSIC bus will be the first index + + if [ -e /sys/bus/platform/drivers/msm_hsic_host ]; then + if [ ! -L /sys/bus/usb/devices/1-1 ]; then + echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind + fi + + chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/bind + chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/unbind + chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/bind + chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/unbind + fi + + wlanchip="" + +# force ar6004 is ar6004_wlan.conf existed. + if [ -f /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf ]; then + wlanchip=`cat /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf` + fi + +# auto detect ar6004-sdio card +# for ar6004-sdio card, the vendor id and device id is as the following +# vendor id device id +# 0x0271 0x0400 +# 0x0271 0x0401 + if [ "$wlanchip" == "" ]; then + sdio_vendors=`echo \`cat /sys/bus/mmc/devices/*/*/vendor\`` + sdio_devices=`echo \`cat /sys/bus/mmc/devices/*/*/device\`` + ven_idx=0 + + for vendor in $sdio_vendors; do + case "$vendor" in + "0x0271") + dev_idx=0 + for device in $sdio_devices; do + if [ $ven_idx -eq $dev_idx ]; then + case "$device" in + "0x0400" | "0x0401" | "0x0402") + wlanchip="AR6004-SDIO" + ;; + *) + ;; + esac + fi + dev_idx=$(( $dev_idx + 1)) + done + ;; + *) + ;; + esac + ven_idx=$(( $ven_idx + 1)) + done + # auto detect ar6004-sdio card end + fi + +# for ar6004-usb card, the vendor id and device id is as the following +# vendor id product id +# 0x0cf3 0x9374 +# 0x0cf3 0x9372 + if [ "$wlanchip" == "" ]; then + usb_vendors=`echo \`cat /sys/bus/usb/devices/*/*/idVendor\`` + usb_products=`echo \`cat /sys/bus/usb/devices/*/*/idProduct\`` + ven_idx=0 + + for vendor in $usb_vendors; do + case "$vendor" in + "0cf3") + dev_idx=0 + for product in $usb_products; do + if [ $ven_idx -eq $dev_idx ]; then + case "$product" in + "9374" | "9372") + wlanchip="AR6004-USB" + ;; + *) + ;; + esac + fi + dev_idx=$(( $dev_idx + 1)) + done + ;; + *) + ;; + esac + ven_idx=$(( $ven_idx + 1)) + done + # auto detect ar6004-usb card end + fi + + echo "The WLAN Chip ID is $wlanchip" + case "$wlanchip" in + "AR6004-USB") + echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind + setprop wlan.driver.ath 2 + setprop qcom.bluetooth.soc ath3k + btsoc="ath3k" + rm /system/lib/modules/wlan.ko + ln -s /system/lib/modules/ath6kl-3.5/ath6kl_usb.ko \ + /system/lib/modules/wlan.ko + rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin + rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_usb \ + /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_usb \ + /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin + rm /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin_usb \ + /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin + + # Use different wpa_supplicant.conf template between wcn driver + # and ath6kl driver + rm /system/etc/wifi/wpa_supplicant.conf + ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \ + /system/etc/wifi/wpa_supplicant.conf + ;; + + "AR6004-SDIO") + setprop wlan.driver.ath 2 + setprop qcom.bluetooth.soc ath3k + btsoc="ath3k" + # Chown polling nodes as needed from UI running on system server + chmod -h 0200 /sys/devices/msm_sdcc.1/polling + chmod -h 0200 /sys/devices/msm_sdcc.2/polling + chmod -h 0200 /sys/devices/msm_sdcc.3/polling + chmod -h 0200 /sys/devices/msm_sdcc.4/polling + + chown -h system.system /sys/devices/msm_sdcc.1/polling + chown -h system.system /sys/devices/msm_sdcc.2/polling + chown -h system.system /sys/devices/msm_sdcc.3/polling + chown -h system.system /sys/devices/msm_sdcc.4/polling + + rm /system/lib/modules/wlan.ko + ln -s /system/lib/modules/ath6kl-3.5/ath6kl_sdio.ko \ + /system/lib/modules/wlan.ko + rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin + rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_sdio \ + /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_sdio \ + /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin + rm /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin_sdio \ + /system/etc/firmware/ath6k/AR6004/hw3.0/bdata.bin + + # Use different wpa_supplicant.conf template between wcn driver + # and ath6kl driver + rm /system/etc/wifi/wpa_supplicant.conf + ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \ + /system/etc/wifi/wpa_supplicant.conf + ;; + + *) + echo "*** WI-FI chip ID is not specified in /persist/wlan_chip_id **" + echo "*** Use the default WCN driver. **" + setprop wlan.driver.ath 0 + rm /system/lib/modules/wlan.ko + ln -s /system/lib/modules/pronto/pronto_wlan.ko \ + /system/lib/modules/wlan.ko + # Populate the writable driver configuration file + if [ ! -s /data/misc/wifi/WCNSS_qcom_cfg.ini ]; then + cp /system/etc/wifi/WCNSS_qcom_cfg.ini \ + /data/misc/wifi/WCNSS_qcom_cfg.ini + chown -h system:wifi /data/misc/wifi/WCNSS_qcom_cfg.ini + chmod -h 660 /data/misc/wifi/WCNSS_qcom_cfg.ini + fi + + # The property below is used in Qcom SDK for softap to determine + # the wifi driver config file + setprop wlan.driver.config /data/misc/wifi/WCNSS_qcom_cfg.ini + + # Use different wpa_supplicant.conf template between wcn driver + # and ath6kl driver + rm /system/etc/wifi/wpa_supplicant.conf + ln -s /system/etc/wifi/wpa_supplicant_wcn.conf \ + /system/etc/wifi/wpa_supplicant.conf + + # Trigger WCNSS platform driver + trigger_wcnss & + ;; + esac + ;; + + apq8084*) + echo "*** Use the CNSS CLD driver.**" + setprop wlan.driver.ath 0 + + # Use different wpa_supplicant.conf template between wcn driver + # and ath6kl driver + rm /system/etc/wifi/wpa_supplicant.conf + ln -s /system/etc/wifi/wpa_supplicant_wcn.conf \ + /system/etc/wifi/wpa_supplicant.conf + ;; + + msm8960*) + + # Move cfg80211.ko to prima directory, the default cfg80211.ko is + # for wcnss solution + if [ ! -L /system/lib/modules/cfg80211.ko ]; then + mv /system/lib/modules/cfg80211.ko /system/lib/modules/prima/ + fi + + wlanchip="" + + if [ -f /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf ]; then + wlanchip=`cat /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf` + fi + + if [ "$wlanchip" == "" ]; then + # auto detect ar6004-usb card + # for ar6004-usb card, the vendor id and device id is as the following + # vendor id product id + # 0x0cf3 0x9374 + # 0x0cf3 0x9372 + usb_vendors=`echo \`cat /sys/bus/usb/devices/*/*/idVendor\`` + usb_products=`echo \`cat /sys/bus/usb/devices/*/*/idProduct\`` + ven_idx=0 + + for vendor in $usb_vendors; do + case "$vendor" in + "0cf3") + dev_idx=0 + for product in $usb_products; do + if [ $ven_idx -eq $dev_idx ]; then + case "$product" in + "9374" | "9372") + wlanchip="AR6004-USB" + ;; + *) + ;; + esac + fi + dev_idx=$(( $dev_idx + 1)) + done + ;; + *) + ;; + esac + ven_idx=$(( $ven_idx + 1)) + done + # auto detect ar6004-usb card end + fi + + if [ "$wlanchip" == "" ]; then + # auto detect ar6004-sdio card + # for ar6004-sdio card, the vendor id and device id is + # as the following + # vendor id device id + # 0x0271 0x0400 + # 0x0271 0x0401 + sdio_vendors=`echo \`cat /sys/bus/mmc/devices/*/*/vendor\`` + sdio_devices=`echo \`cat /sys/bus/mmc/devices/*/*/device\`` + ven_idx=0 + + for vendor in $sdio_vendors; do + case "$vendor" in + "0x0271") + dev_idx=0 + for device in $sdio_devices; do + if [ $ven_idx -eq $dev_idx ]; then + case "$device" in + "0x0400" | "0x0401") + wlanchip="AR6004-SDIO" + ;; + *) + ;; + esac + fi + dev_idx=$(( $dev_idx + 1)) + done + ;; + *) + ;; + esac + ven_idx=$(( $ven_idx + 1)) + done + # auto detect ar6004-sdio card end + fi + + echo "The WLAN Chip ID is $wlanchip" + case "$wlanchip" in + "AR6004-USB") + setprop wlan.driver.ath 2 + rm /system/lib/modules/wlan.ko + rm /system/lib/modules/cfg80211.ko + ln -s /system/lib/modules/ath6kl-3.5/ath6kl_usb.ko \ + /system/lib/modules/wlan.ko + ln -s /system/lib/modules/ath6kl-3.5/cfg80211.ko \ + /system/lib/modules/cfg80211.ko + rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin + rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_usb \ + /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_usb \ + /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin + + # Use different wpa_supplicant.conf template between wcn driver + # and ath6kl driver + rm /system/etc/wifi/wpa_supplicant.conf + ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \ + /system/etc/wifi/wpa_supplicant.conf + ;; + "AR6004-SDIO") + setprop wlan.driver.ath 2 + setprop qcom.bluetooth.soc ath3k + btsoc="ath3k" + rm /system/lib/modules/wlan.ko + rm /system/lib/modules/cfg80211.ko + ln -s /system/lib/modules/ath6kl-3.5/ath6kl_sdio.ko \ + /system/lib/modules/wlan.ko + ln -s /system/lib/modules/ath6kl-3.5/cfg80211.ko \ + /system/lib/modules/cfg80211.ko + rm /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin + rm /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin_sdio \ + /system/etc/firmware/ath6k/AR6004/hw1.3/fw.ram.bin + ln -s /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin_sdio \ + /system/etc/firmware/ath6k/AR6004/hw1.3/bdata.bin + + # Use different wpa_supplicant.conf template between wcn driver + # and ath6kl driver + rm /system/etc/wifi/wpa_supplicant.conf + ln -s /system/etc/wifi/wpa_supplicant_ath6kl.conf \ + /system/etc/wifi/wpa_supplicant.conf + ;; + *) + echo "*** WI-FI chip ID is not specified in /persist/wlan_chip_id **" + echo "*** Use the default WCN driver. **" + setprop wlan.driver.ath 0 + rm /system/lib/modules/wlan.ko + rm /system/lib/modules/cfg80211.ko + ln -s /system/lib/modules/prima/prima_wlan.ko \ + /system/lib/modules/wlan.ko + ln -s /system/lib/modules/prima/cfg80211.ko \ + /system/lib/modules/cfg80211.ko + + # The property below is used in Qcom SDK for softap to determine + # the wifi driver config file + setprop wlan.driver.config /data/misc/wifi/WCNSS_qcom_cfg.ini + + # Use different wpa_supplicant.conf template between wcn driver + # and ath6kl driver + rm /system/etc/wifi/wpa_supplicant.conf + ln -s /system/etc/wifi/wpa_supplicant_wcn.conf \ + /system/etc/wifi/wpa_supplicant.conf + + # Trigger WCNSS platform driver + trigger_wcnss & + ;; + esac + ;; + + msm7627a*) + + # The default cfg80211 module is for volans + if [ ! -L /system/lib/modules/cfg80211.ko ]; then + mv /system/lib/modules/cfg80211.ko /system/lib/modules/volans/ + fi + + wlanchip=`cat /persist/wlan_chip_id` + echo "The WLAN Chip ID is $wlanchip" + case "$wlanchip" in + "ATH6KL") + setprop wlan.driver.ath 1 + rm /system/lib/modules/wlan.ko + rm /system/lib/modules/cfg80211.ko + ln -s /system/lib/modules/ath6kl/ath6kl_sdio.ko \ + /system/lib/modules/wlan.ko + ln -s /system/lib/modules/ath6kl/cfg80211.ko \ + /system/lib/modules/cfg80211.ko + ;; + "WCN1314") + setprop wlan.driver.ath 0 + rm /system/lib/modules/wlan.ko + rm /system/lib/modules/cfg80211.ko + ln -s /system/lib/modules/volans/WCN1314_rf.ko \ + /system/lib/modules/wlan.ko + ln -s /system/lib/modules/volans/cfg80211.ko \ + /system/lib/modules/cfg80211.ko + ;; + *) + setprop wlan.driver.ath 1 + rm /system/lib/modules/wlan.ko + rm /system/lib/modules/cfg80211.ko + ln -s /system/lib/modules/ath6kl/ath6kl_sdio.ko \ + /system/lib/modules/wlan.ko + ln -s /system/lib/modules/ath6kl/cfg80211.ko \ + /system/lib/modules/cfg80211.ko + echo "************************************************************" + echo "*** Error:WI-FI chip ID is not specified in" + echo "/persist/wlan_chip_id" + echo "******* WI-FI may not work ***************************" + ;; + esac + ;; + + msm7627*) + ln -s /data/hostapd/qcom_cfg.ini /etc/firmware/wlan/qcom_cfg.ini + ln -s /persist/qcom_wlan_nv.bin /etc/firmware/wlan/qcom_wlan_nv.bin + ;; + + msm8660*) + ;; + + msm7630*) + ;; + + *) + ;; +esac + diff --git a/rootdir/bin/init.qti.ims.sh b/rootdir/bin/init.qti.ims.sh new file mode 100755 index 0000000..c2ac44e --- /dev/null +++ b/rootdir/bin/init.qti.ims.sh @@ -0,0 +1,57 @@ +#! /vendor/bin/sh + +# Copyright (c) 2014, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of The Linux Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# + +dir0=/data +trigger_file=$dir0/ims_diabled +ims_disabled=`getprop persist.ims.disabled` +target=`getprop ro.build.product` + +#if [ ! -e $trigger_file ]; then +# for future use in doing conditional debugging +#else +# +#fi +echo "$ims_disabled" +echo "$target" + +if [ "$ims_disabled" = "0" ]; then + echo "ims will be enabled" + setprop service.qti.ims.enabled 1 + exit +fi + +if [ "$ims_disabled" = "1" ] || [ "$target" = "msm8909_512" ]; then + echo "ims is disabled" + setprop service.qti.ims.enabled 0 +else + echo "ims is enabled" + setprop service.qti.ims.enabled 1 +fi diff --git a/rootdir/bin/qca6234-service.sh b/rootdir/bin/qca6234-service.sh new file mode 100755 index 0000000..ee0f4dc --- /dev/null +++ b/rootdir/bin/qca6234-service.sh @@ -0,0 +1,87 @@ +#! /vendor/bin/sh + +# Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of The Linux Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# Check whether device is plugged on the HSIC bus +# Currently HSIC bus will be the first index + +PATH=/sbin:/system/sbin:/system/bin:/system/xbin +export PATH + +deviceprop=`getprop ro.baseband` +boardprop=`getprop ro.board.platform` + +if [ -e /sys/bus/platform/drivers/msm_hsic_host ]; then + if [ ! -L /sys/bus/usb/devices/1-1 ]; then + echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind + fi + + chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/bind + chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/unbind + chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/bind + chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/unbind +fi + +wlanchip="" + +if [ "$deviceprop" == "apq" ] && [ "$boardprop" == "msm8974" ]; then + wlanchip="AR6004-USB" +fi + +# force ar6004 is ar6004_wlan.conf existed. +if [ -f /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf ]; then + wlanchip=`cat /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf` +fi + +echo "The WLAN Chip ID is $wlanchip" +if [ "$wlanchip" == "AR6004-USB" ]; then + echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind + setprop wlan.driver.ath 2 + setprop qcom.bluetooth.soc ath3k + setprop wlan.driver.name /system/lib/modules/ath6kl-3.5/ath6kl_usb.ko + setprop wlan.supp.template /system/etc/wifi/wpa_supplicant_ath6kl.conf + btsoc="ath3k" +elif [ "$wlanchip" == "AR6004-SDIO" ]; then + setprop wlan.driver.ath 2 + setprop qcom.bluetooth.soc ath3k + setprop wlan.driver.name /system/lib/modules/ath6kl-3.5/ath6kl_sdio.ko + setprop wlan.supp.template /system/etc/wifi/wpa_supplicant_ath6kl.conf + btsoc="ath3k" + + # Chown polling nodes as needed from UI running on system server + chmod -h 0200 /sys/devices/msm_sdcc.1/polling + chmod -h 0200 /sys/devices/msm_sdcc.2/polling + chmod -h 0200 /sys/devices/msm_sdcc.3/polling + chmod -h 0200 /sys/devices/msm_sdcc.4/polling + + chown -h system.system /sys/devices/msm_sdcc.1/polling + chown -h system.system /sys/devices/msm_sdcc.2/polling + chown -h system.system /sys/devices/msm_sdcc.3/polling + chown -h system.system /sys/devices/msm_sdcc.4/polling +fi + diff --git a/rootdir/etc/fstab.qcom b/rootdir/etc/fstab.qcom old mode 100755 new mode 100644 index 0892afe..2c4f737 --- a/rootdir/etc/fstab.qcom +++ b/rootdir/etc/fstab.qcom @@ -7,12 +7,11 @@ # Non-A/B fstab.qcom variant # -/dev/block/bootdevice/by-name/userdata /data ext4 nosuid,nodev,barrier=1,noauto_da_alloc,discard,noatime,lazytime,errors=panic wait,resize,check,forceencrypt=footer,crashcheck,quota -/dev/block/bootdevice/by-name/cust /cust ext4 ro,nosuid,nodev,barrier=1 wait,check +/dev/block/bootdevice/by-name/userdata /data ext4 nosuid,nodev,barrier=1,noauto_da_alloc,discard,noatime,lazytime,errors=panic wait,resize,check,encryptable=footer,crashcheck,quota /dev/block/bootdevice/by-name/misc /misc emmc defaults defaults /dev/block/bootdevice/by-name/modem /firmware vfat ro,shortname=lower,uid=1000,gid=1000,dmask=227,fmask=337,context=u:object_r:firmware_file:s0 wait /dev/block/bootdevice/by-name/bluetooth /bt_firmware vfat ro,shortname=lower,uid=1002,gid=3002,dmask=227,fmask=337,context=u:object_r:bt_firmware_file:s0 wait -/devices/soc/a800000.ssusb/a800000.dwc3/xhci-hcd.0.auto* /storage/usbotg vfat nosuid,nodev wait,voldmanaged=usbotg:auto +/devices/soc/a800000.ssusb/a800000.dwc3/xhci-hcd.0.auto* /storage/usbotg vfat nosuid,nodev wait,voldmanaged=usbotg:auto /dev/block/bootdevice/by-name/dsp /dsp ext4 ro,nosuid,nodev,barrier=1 wait -/dev/block/bootdevice/by-name/cache /cache ext4 nosuid,nodev,noatime,barrier=1 wait -/dev/block/bootdevice/by-name/persist /persist ext4 nosuid,nodev,barrier=1,noatime wait,check +/dev/block/bootdevice/by-name/cache /cache ext4 nosuid,nodev,noatime,barrier=1 wait +/dev/block/bootdevice/by-name/persist /persist ext4 nosuid,nodev,barrier=1,noatime wait,check diff --git a/rootdir/etc/init.msm.usb.configfs.rc b/rootdir/etc/init.msm.usb.configfs.rc new file mode 100755 index 0000000..b7f5b1b --- /dev/null +++ b/rootdir/etc/init.msm.usb.configfs.rc @@ -0,0 +1,863 @@ +# Copyright (c) 2016-2017, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of The Linux Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS +# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# MIUI ADD +on property:vold.decrypt=trigger_restart_framework + setprop sys.usb.config ${persist.sys.usb.config} + +# USB compositions +on property:sys.usb.config=mass_storage && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "msc" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0xF000 + symlink /config/usb_gadget/g1/functions/mass_storage.0 /config/usb_gadget/g1/configs/b.1/f1 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mass_storage,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=mass_storage,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "adb_msc" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9015 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/mass_storage.0 /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x901D + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x900E + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,rmnet,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,serial_cdev,rmnet,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "Default composition" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9091 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,rmnet && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "Default comp without ADB" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9092 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,adb,serial_cdev,serial_nmea,rmnet && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,adb,serial_cdev,serial_nmea,rmnet && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_adb_dun_nmea_rmnet" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9025 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/cser.nmea.1 /config/usb_gadget/g1/configs/b.1/f4 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f5 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.tethering=true + write /sys/class/net/rndis0/queues/rx-0/rps_cpus ${sys.usb.rps_mask} + +on property:sys.usb.config=rndis + setprop sys.usb.config rndis,${persist.sys.usb.config.extra} + +on property:sys.usb.config=rndis,none && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x2717 + write /config/usb_gadget/g1/idProduct 0xFF80 + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + write /config/usb_gadget/g1/configs/b.1/f1/wceis 1 + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,adb + setprop sys.usb.config rndis,${persist.sys.usb.config.extra},adb + +on property:sys.usb.config=rndis,none,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,none,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x2717 + write /config/usb_gadget/g1/idProduct 0xFF88 + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + write /config/usb_gadget/g1/configs/b.1/f1/wceis 1 + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=rndis,diag && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x902C + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,diag,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x902D + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=rndis,serial_cdev && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90B3 + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,serial_cdev,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,serial_cdev,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90B4 + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=rndis,serial_cdev,diag && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun_diag" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90B5 + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,serial_cdev,diag,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,serial_cdev,diag,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun_diag" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90B6 + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=mtp,diag && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "mtp_diag" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x901B + symlink /config/usb_gadget/g1/functions/mtp.gs0 /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mtp,diag,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=mtp,diag,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "mtp_diag_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x903A + symlink /config/usb_gadget/g1/functions/mtp.gs0 /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x904A + write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,qdss,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9060 + write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,rmnet && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss_rmnet" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9083 + write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,rmnet,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,qdss,rmnet,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss_rmnet_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9084 + write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f4 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=rndis,diag,qdss && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_qdss" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9081 + write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=rndis,diag,qdss,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,qdss,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_qdss_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9082 + write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 + symlink /config/usb_gadget/g1/functions/${sys.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=ncm && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ncm" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0xA4A1 + symlink /config/usb_gadget/g1/functions/ncm.0 /config/usb_gadget/g1/configs/b.1/f1 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=ncm,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=ncm,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ncm_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x908C + symlink /config/usb_gadget/g1/functions/ncm.0 /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x9004 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,adb,serial_cdev && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,adb,serial_cdev && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_adb_dun" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x901f + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,rmnet,dpl && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_dpl" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90b7 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.dpl /config/usb_gadget/g1/configs/b.1/f4 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,rmnet,dpl,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,serial_cdev,rmnet,dpl,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_dpl_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90b8 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.dpl /config/usb_gadget/g1/configs/b.1/f4 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f5 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=rndis,diag,dpl && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_dpl" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90bf + symlink /config/usb_gadget/g1/functions/gsi.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.dpl /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,diag,dpl,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,dpl,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_dpl_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90c0 + symlink /config/usb_gadget/g1/functions/gsi.rndis /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.dpl /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=ccid && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ccid" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90CE + symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f1 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=ccid,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=ccid,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ccid_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90CF + symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=ccid,diag && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ccid_diag" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90D0 + symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=ccid,diag,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=ccid,diag,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ccid_diag_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90D1 + symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,rmnet,ccid && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_ccid" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90D2 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f4 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,rmnet,ccid,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,serial_cdev,rmnet,ccid,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_ccid_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90D3 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f4 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f5 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,rmnet && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_diag_mdm,qdss_qdss_mdm_dun_dun_mdm_rmnet" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90D7 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f4 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f5 + symlink /config/usb_gadget/g1/functions/cser.dun.2 /config/usb_gadget/g1/configs/b.1/f6 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f7 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,rmnet,adb && property:sys.usb.configfs=1 + start adbd + +on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,rmnet,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_diag_mdm,qdss_qdss_mdm_dun_dun_mdm_rmnet_adb" + rm /config/usb_gadget/g1/configs/b.1/f1 + rm /config/usb_gadget/g1/configs/b.1/f2 + rm /config/usb_gadget/g1/configs/b.1/f3 + rm /config/usb_gadget/g1/configs/b.1/f4 + rm /config/usb_gadget/g1/configs/b.1/f5 + rm /config/usb_gadget/g1/configs/b.1/f6 + rm /config/usb_gadget/g1/configs/b.1/f7 + rm /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0x90D8 + symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 + symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f2 + symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3 + symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f4 + symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f5 + symlink /config/usb_gadget/g1/functions/cser.dun.2 /config/usb_gadget/g1/configs/b.1/f6 + symlink /config/usb_gadget/g1/functions/${sys.usb.rmnet.func.name}.rmnet /config/usb_gadget/g1/configs/b.1/f7 + symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f8 + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x2717 + write /config/usb_gadget/g1/idProduct 0xFF08 + +on property:sys.usb.config=mtp && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x2717 + write /config/usb_gadget/g1/idProduct 0xFF40 + +on property:sys.usb.config=mtp,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x2717 + write /config/usb_gadget/g1/idProduct 0xFF48 + +on property:sys.usb.config=ptp && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x2717 + write /config/usb_gadget/g1/idProduct 0xFF10 + +on property:sys.usb.config=ptp,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x2717 + write /config/usb_gadget/g1/idProduct 0xFF18 + +on property:sys.usb.config=accessory && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x18d1 + write /config/usb_gadget/g1/idProduct 0x2d00 + +on property:sys.usb.config=accessory,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x18d1 + write /config/usb_gadget/g1/idProduct 0x2d01 + +on property:sys.usb.config=audio_source && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x18d1 + write /config/usb_gadget/g1/idProduct 0x2d02 + +on property:sys.usb.config=audio_source,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x18d1 + write /config/usb_gadget/g1/idProduct 0x2d03 + +on property:sys.usb.config=accessory,audio_source && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x18d1 + write /config/usb_gadget/g1/idProduct 0x2d04 + +on property:sys.usb.config=accessory,audio_source,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x18d1 + write /config/usb_gadget/g1/idProduct 0x2d05 + +on property:sys.usb.config=midi && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x18d1 + write /config/usb_gadget/g1/idProduct 0x4ee8 + +on property:sys.usb.config=midi,adb && property:sys.usb.configfs=1 + write /config/usb_gadget/g1/idVendor 0x18d1 + write /config/usb_gadget/g1/idProduct 0x4ee9 diff --git a/rootdir/etc/init.qcom.rc b/rootdir/etc/init.qcom.rc new file mode 100755 index 0000000..357f276 --- /dev/null +++ b/rootdir/etc/init.qcom.rc @@ -0,0 +1,1299 @@ +# Copyright (c) 2009-2012, 2014-2017, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +import /vendor/etc/init/hw/init.qcom.usb.rc +import /vendor/etc/init/hw/init.msm.usb.configfs.rc +import /vendor/etc/init/hw/init.target.rc + +on early-init + mount debugfs debugfs /sys/kernel/debug + chmod 0755 /sys/kernel/debug + chown root system /dev/kmsg + chmod 0620 /dev/kmsg + +on init + # Set permissions for persist partition + mkdir /persist 0771 root system + + # Support legacy paths + symlink /sdcard /mnt/sdcard + symlink /sdcard /storage/sdcard0 + + # Create cgroup mount point for memory + mkdir /sys/fs/cgroup/memory/bg 0750 root system + write /sys/fs/cgroup/memory/bg/memory.swappiness 140 + write /sys/fs/cgroup/memory/bg/memory.move_charge_at_immigrate 1 + chown root system /sys/fs/cgroup/memory/bg/tasks + chmod 0660 /sys/fs/cgroup/memory/bg/tasks + +on post-fs + chmod 0755 /sys/kernel/debug/tracing + insmod /system/lib/modules/exfat.ko + +on early-boot + # set RLIMIT_MEMLOCK to 64MB + setrlimit 8 67108864 67108864 + # Allow subsystem (modem etc) debugging + write /sys/kernel/boot_adsp/boot 1 + write /sys/kernel/boot_cdsp/boot 1 + write /sys/kernel/boot_slpi/boot 1 + exec u:r:qti_init_shell:s0 -- /vendor/bin/init.qcom.early_boot.sh + chown root audio /sys/kernel/boot_adsp/boot + +on boot + chown bluetooth bluetooth /sys/module/bluetooth_power/parameters/power + chown bluetooth net_bt /sys/class/rfkill/rfkill0/type + chown bluetooth net_bt /sys/class/rfkill/rfkill0/state + chown bluetooth bluetooth /proc/bluetooth/sleep/proto + chown bluetooth bluetooth /sys/module/hci_uart/parameters/ath_lpm + chown bluetooth bluetooth /sys/module/hci_uart/parameters/ath_btwrite + chown system system /sys/module/sco/parameters/disable_esco + chown bluetooth bluetooth /sys/module/hci_smd/parameters/hcismd_set + chown system system /sys/module/msm_core/parameters/polling_interval + chown system system /sys/module/msm_core/parameters/disabled + chown system system /sys/kernel/debug/msm_core/enable + chown system system /sys/kernel/debug/msm_core/ptable + chown system system /sys/kernel/boot_slpi/ssr + chown system system /sys/module/radio_iris_transport/parameters/fmsmd_set + chmod 0660 /sys/module/bluetooth_power/parameters/power + chmod 0660 /sys/module/hci_smd/parameters/hcismd_set + chmod 0660 /sys/module/radio_iris_transport/parameters/fmsmd_set + chmod 0660 /sys/class/rfkill/rfkill0/state + chmod 0660 /proc/bluetooth/sleep/proto + chown bluetooth net_bt /dev/ttyHS0 + chmod 0660 /sys/module/hci_uart/parameters/ath_lpm + chmod 0660 /sys/module/hci_uart/parameters/ath_btwrite + chmod 0660 /dev/ttyHS0 + chown bluetooth bluetooth /sys/devices/platform/msm_serial_hs.0/clock + chmod 0660 /sys/devices/platform/msm_serial_hs.0/clock + + chmod 0660 /dev/ttyHS2 + chown bluetooth bluetooth /dev/ttyHS2 + + chown bluetooth net_bt /sys/class/rfkill/rfkill0/device/extldo + chmod 0660 /sys/class/rfkill/rfkill0/device/extldo + + #Create QMUX deamon socket area + mkdir /dev/socket/qmux_radio 0770 radio radio + chmod 2770 /dev/socket/qmux_radio + mkdir /dev/socket/qmux_audio 0770 media audio + chmod 2770 /dev/socket/qmux_audio + mkdir /dev/socket/qmux_bluetooth 0770 bluetooth bluetooth + chmod 2770 /dev/socket/qmux_bluetooth + mkdir /dev/socket/qmux_gps 0770 gps gps + chmod 2770 /dev/socket/qmux_gps + + mkdir /persist/drm 0770 system system + mkdir /persist/bluetooth 0770 bluetooth bluetooth + mkdir /persist/misc 0770 system system + mkdir /persist/alarm 0770 system system + mkdir /persist/time 0770 system system + mkdir /persist/secnvm 0770 system system + + #Create NETMGR daemon socket area + mkdir /dev/socket/netmgr 0750 radio radio + + setprop wifi.interface wlan0 + +# Define TCP buffer sizes for various networks +# ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax, + setprop net.tcp.buffersize.wifi 524288,2097152,4194304,262144,524288,1048576 + + + setprop ro.telephony.call_ring.multiple false + + #enable camera read sensors data + setprop persist.camera.gyro.disable 0 + + #Remove SUID bit for iproute2 ip tool + chmod 0755 /system/bin/ip + + + chmod 0444 /sys/devices/platform/msm_hsusb/gadget/usb_state + +# Define TCP buffer sizes for various networks +# ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax, + setprop net.tcp.buffersize.default 4096,87380,524288,4096,16384,110208 + setprop net.tcp.buffersize.lte 2097152,4194304,8388608,262144,524288,1048576 + setprop net.tcp.buffersize.umts 4094,87380,110208,4096,16384,110208 + setprop net.tcp.buffersize.hspa 4094,87380,1220608,4096,16384,1220608 + setprop net.tcp.buffersize.hsupa 4094,87380,1220608,4096,16384,1220608 + setprop net.tcp.buffersize.hsdpa 4094,87380,1220608,4096,16384,1220608 + setprop net.tcp.buffersize.hspap 4094,87380,1220608,4096,16384,1220608 + setprop net.tcp.buffersize.edge 4093,26280,35040,4096,16384,35040 + setprop net.tcp.buffersize.gprs 4092,8760,11680,4096,8760,11680 + setprop net.tcp.buffersize.evdo 4094,87380,524288,4096,16384,262144 + + setprop net.tcp.2g_init_rwnd 10 + +# Assign TCP buffer thresholds to be ceiling value of technology maximums +# Increased technology maximums should be reflected here. + write /proc/sys/net/core/rmem_max 8388608 + write /proc/sys/net/core/wmem_max 8388608 + + # To prevent out of order acknowledgements from making + # connection tracking to treat them as not belonging to + # the connection they belong to. + # Otherwise, a weird issue happens in which some long + # connections on high-throughput links get dropped when + # an ack packet comes out of order + write /proc/sys/net/netfilter/nf_conntrack_tcp_be_liberal 1 + + # Set the console loglevel to < KERN_INFO + # Set the default message loglevel to KERN_INFO + write /proc/sys/kernel/printk "6 6 1 7" + + # Allow access for CCID command/response timeout configuration + chown system system /sys/module/ccid_bridge/parameters/bulk_msg_timeout + + # bond0 used by FST Manager + chown wifi wifi /sys/class/net/bond0/bonding/queue_id + + # Allow access to emmc rawdump block partition and dload sysfs node + chown root system /dev/block/bootdevice/by-name/rawdump -p /dev/block/ + chmod 0660 /dev/block/bootdevice/by-name/rawdump -p /dev/block/ + chown root system /sys/kernel/dload/emmc_dload + chmod 0660 /sys/kernel/dload/emmc_dload + chown root system /dev/block/bootdevice/by-name/ramdump -p /dev/block/ + chmod 0660 /dev/block/bootdevice/by-name/ramdump -p /dev/block/ + chown root system /sys/kernel/dload/dload_mode + chmod 0660 /sys/kernel/dload/dload_mode + + chown system system /sys/class/backlight/panel0-backlight/brightness + chown system system /sys/class/backlight/panel0-backlight/max_brightness + + # Allow access to sensors device attributes + chown system system /sys/class/sensors/MPU6050-accel/enable + chown system system /sys/class/sensors/MPU6050-accel/poll_delay + chown system system /sys/class/sensors/MPU6050-gyro/enable + chown system system /sys/class/sensors/MPU6050-gyro/poll_delay + chown system system /sys/class/sensors/apds9930-light/enable + chown system system /sys/class/sensors/apds9930-light/poll_delay + chown system system /sys/class/sensors/apds9930-proximity/enable + chown system system /sys/class/sensors/apds9930-proximity/poll_delay + chown system system /sys/class/sensors/compass/enable + chown system system /sys/class/sensors/compass/poll_delay + chown system system /sys/class/sensors/bma2x2-accel/enable + chown system system /sys/class/sensors/bma2x2-accel/poll_delay + chown system system /sys/class/sensors/ltr553-light/enable + chown system system /sys/class/sensors/ltr553-light/poll_delay + chown system system /sys/class/sensors/ltr553-proximity/enable + chown system system /sys/class/sensors/ltr553-proximity/poll_delay + chown system system /sys/class/sensors/ap3426-light/enable + chown system system /sys/class/sensors/ap3426-light/poll_delay + chown system system /sys/class/sensors/ap3426-proximity/enable + chown system system /sys/class/sensors/ap3426-proximity/poll_delay + + # Create directory used for display + mkdir /persist/display 0770 system graphics + + # Create vpp directory + mkdir /persist/vpp 0770 media media + + # load WIGIG platform driver + insmod /vendor/lib/modules/msm_11ad_proxy.ko + +# msm specific files that need to be created on /data +on post-fs-data + mkdir /data/vendor/misc 01771 system system + + # Create directory used by display clients + mkdir /data/vendor/display 0770 system graphics + + # Change lm related dirs + mkdir /data/vendor/lm 0700 root root + + # Create directory used by media clients + mkdir /data/vendor/media 0770 mediacodec media + + #Create directories for Fingerprint + mkdir /data/vendor/misc/qti_fp 0770 system system + mkdir /data/vendor/misc/qti_fp/bg_estimation 0770 system system + mkdir /data/vendor/misc/qti_fp/calib_test 0770 system system + mkdir /data/vendor/misc/qti_fp/database 0770 system system + + # create QDMA dropbox + mkdir /data/vendor/qdmastats 0700 system system + mkdir /data/vendor/qdma 0770 system system + + # Create directory for TZ Apps + mkdir /data/misc/qsee 0770 system system + + # Create directory for apps access via QTEEConnector + mkdir /data/vendor/qtee 0770 system system + + # Create directory for voiceprint + mkdir /data/misc/qvop 0771 system system + + #Create folder for mm-qcamera-daemon + mkdir /data/misc/camera 0770 camera camera + + mkdir /data/media 0770 media_rw media_rw + chown media_rw media_rw /data/media + + #Create directory for tftp + mkdir /data/vendor/tombstones 0771 system system + + mkdir /data/vendor/ramdump 0771 root system + mkdir /data/vendor/bluetooth 0770 bluetooth bluetooth + mkdir /data/vendor/ramdump/bluetooth 0770 bluetooth bluetooth + + # Create the directories used by the Wireless subsystem + mkdir /data/vendor/wifi 0770 wifi wifi + mkdir /data/vendor/wifi/sockets 0770 wifi wifi + mkdir /data/vendor/wifi/hostapd 0770 wifi wifi + mkdir /data/vendor/wifi/hostapd/ctrl 0770 wifi wifi + mkdir /data/vendor/wifi/wpa_supplicant 0770 wifi wifi + mkdir /data/vendor/wifi/wigig_hostapd 0770 wifi wifi + mkdir /data/misc/wifi 0770 wifi wifi + mkdir /data/misc/wifi/sockets 0770 wifi wifi + mkdir /data/misc/wifi/wpa_supplicant 0770 wifi wifi + mkdir /data/misc/dhcp 0777 dhcp dhcp + chown dhcp dhcp /data/misc/dhcp + + #create port-bridge log dir + mkdir /data/vendor/port_bridge 0770 radio radio + chmod 0770 /data/vendor/port_bridge + + #create netmgr log dir + mkdir /data/vendor/netmgr 0770 radio radio + chmod 0770 /data/vendor/netmgr + + #create ipacm log dir + mkdir /data/vendor/ipa 0770 radio radio + chmod 0770 /data/vendor/ipa + + # Create the directories used by CnE subsystem + mkdir /data/connectivity 0771 system system + chown system system /data/connectivity + + # Create the directories used by DPM subsystem + mkdir /data/dpm 0771 system system + chown system system /data/dpm + + # Create the directories used by LctDiagSendData + mkdir /data/lct_diag 0771 system system + chown system system /data/lct_diag + + mkdir /data/dpm/nsrm 0771 system system + chown system system /data/dpm/nsrm + + # Create directory used by audio subsystem + mkdir /data/vendor/misc/audio 0770 audio audio + + # Create directory for audio delta files + mkdir /data/vendor/misc/audio/acdbdata 0770 media audio + mkdir /data/vendor/misc/audio/acdbdata/delta 0770 media audio + + # Create directory used by the DASH client + mkdir /data/misc/dash 0770 media audio + + # Create directory for radio + mkdir /data/vendor/radio 0770 system radio + + # Mounting of persist is moved to 'on emmc-fs' and 'on fs' sections + # We chown/chmod /persist again so because mount is run as root + defaults + chown root system /persist + chmod 0771 /persist + chown system system /persist/WCNSS_qcom_wlan_nv.bin + chmod 0664 /sys/devices/platform/msm_sdcc.1/polling + chmod 0664 /sys/devices/platform/msm_sdcc.2/polling + chmod 0664 /sys/devices/platform/msm_sdcc.3/polling + chmod 0664 /sys/devices/platform/msm_sdcc.4/polling + + # Chown polling nodes as needed from UI running on system server + chown system system /sys/devices/platform/msm_sdcc.1/polling + chown system system /sys/devices/platform/msm_sdcc.2/polling + chown system system /sys/devices/platform/msm_sdcc.3/polling + chown system system /sys/devices/platform/msm_sdcc.4/polling + + #Create the symlink to qcn wpa_supplicant folder for ar6000 wpa_supplicant + mkdir /data/system 0775 system system + #symlink /data/misc/wifi/wpa_supplicant /data/system/wpa_supplicant + + #Create directories for Location services + mkdir /data/vendor/location 0770 gps gps + mkdir /data/vendor/location/mq 0770 gps gps + mkdir /data/vendor/location/xtwifi 0770 gps gps + + #Create directory from IMS services + mkdir /data/shared 0755 + chown system system /data/shared + + #Create directory for FOTA + mkdir /data/fota 0771 + chown system system /data/fota + + #Create directory for hostapd + mkdir /data/hostapd 0770 system wifi + + # Create /data/time folder for time-services + mkdir /data/time/ 0700 system system + + mkdir /data/vendor/audio/ 0770 media audio + + # Create a folder for audio delta files + mkdir /data/vendor/audio/acdbdata 0770 media audio + mkdir /data/vendor/audio/acdbdata/delta 0770 media audio + + setprop vold.post_fs_data_done 1 + + #Create a folder for SRS to be able to create a usercfg file + mkdir /data/data/media 0770 media media + + #Create FM dir for patchdownloader + mkdir /data/misc/fm 0770 system system + chmod 0770 /data/misc/fm + + #Create PERFD deamon related dirs + mkdir /data/vendor/perfd 0770 root system + chmod 2770 /data/vendor/perfd + rm /data/vendor/perfd/default_values + + # NFC local data and nfcee xml storage + mkdir /data/nfc 0770 nfc nfc + mkdir /data/nfc/param 0770 nfc nfc + + #Create IOP deamon related dirs + mkdir /data/vendor/iop 0770 root system + + # Mark the copy complete flag to not completed + write /data/vendor/radio/copy_complete 0 + chown radio radio /data/vendor/radio/copy_complete + chmod 0660 /data/vendor/radio/copy_complete + + # copy prebuilt qcril.db files always + copy /vendor/radio/qcril_database/qcril.db /data/vendor/radio/qcril_prebuilt.db + chown radio radio /data/vendor/radio/qcril_prebuilt.db + chmod 0660 /data/vendor/radio/qcril_prebuilt.db + # File flags for prebuilt ril db file + write /data/vendor/radio/prebuilt_db_support 1 + chown radio radio /data/vendor/radio/prebuilt_db_support + chmod 0400 /data/vendor/radio/prebuilt_db_support + write /data/vendor/radio/db_check_done 0 + chown radio radio /data/vendor/radio/db_check_done + chmod 0660 /data/vendor/radio/db_check_done + + # qti-logkit data + mkdir /data/vendor/qti-logkit/ 0771 system system + mkdir /data/vendor/qti-logkit/shared-privileged/ 2770 system system + mkdir /data/vendor/qti-logkit/shared-public/ 2770 system diag + mkdir /data/vendor/qti-logkit/socket-privileged/ 2770 system system + mkdir /data/vendor/qti-logkit/socket-public/ 2750 system diag + mkdir /data/vendor/qti-logkit/logdata/ 2750 system shell + + #Create SWAP related dirs + mkdir /data/system/swap 0770 root system + chmod 2770 /data/system/swap + + # set aggressive read ahead for dm-0 and dm-1 during boot up + write /sys/block/dm-0/queue/read_ahead_kb 2048 + write /sys/block/dm-1/queue/read_ahead_kb 2048 + + # Create vpp directory + mkdir /data/vendor/vpp 0770 media media + + #Create FTM_AP dir for factory test + mkdir /data/FTM_AP 0775 system system + +service nqnfcinfo /system/vendor/bin/nqnfcinfo + class late_start + group nfc + user system + oneshot + +service iop /system/vendor/bin/iop + class main + user root + group root + disabled + socket iop seqpacket 0666 root system + +service qcomsysd /system/vendor/bin/qcom-system-daemon + class main + user root + group root diag + disabled + +on property:persist.vendor.qcomsysd.enabled=1 + start qcomsysd + +service ssr_setup /system/vendor/bin/ssr_setup + oneshot + disabled + +service ss_ramdump /system/vendor/bin/subsystem_ramdump + class main + user system + group system + disabled + +on property:persist.sys.ssr.enable_debug=* + write /sys/module/subsystem_restart/parameters/enable_debug ${persist.sys.ssr.enable_debug} + +on property:persist.sys.mba_boot_timeout=* + write /sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms ${persist.sys.mba_boot_timeout} + +on property:persist.sys.modem_auth_timeout=* + write /sys/module/pil_msa/parameters/modem_auth_timeout_ms ${persist.sys.modem_auth_timeout} + +on property:persist.sys.pil_proxy_timeout=* + write /sys/module/peripheral_loader/parameters/proxy_timeout_ms ${persist.sys.pil_proxy_timeout} + +on property:persist.sys.ssr.restart_level=* + start ssr_setup + +on property:persist.sys.ssr.enable_ramdumps=1 + write /sys/module/subsystem_restart/parameters/enable_ramdumps 1 + mkdir /data/ramdump 770 system system + start ss_ramdump + +on property:persist.sys.ssr.enable_ramdumps=0 + write /sys/module/subsystem_restart/parameters/enable_ramdumps 0 + +on property:sys.boot_completed=1 + write /dev/kmsg "Boot completed " + #Reset read ahead for dm-0 and dm-1 to 512kb + write /sys/block/dm-0/queue/read_ahead_kb 512 + write /sys/block/dm-1/queue/read_ahead_kb 512 + #WDSP FW boot sysfs node used by STHAL + chown media audio /sys/kernel/wdsp0/boot + chown media audio /sys/kernel/wcd_cpe0/fw_name + restorecon /sys/tp_selftest/syn_selftest_result + chown system system /sys/tp_selftest/syn_selftest_result + chmod 0777 /sys/tp_selftest/syn_selftest_result + chown system system /sys/class/ant_class/ant_state + chmod 0644 /sys/class/ant_class/ant_state + +# corefile limit +on property:persist.debug.trace=1 + mkdir /data/core 0777 root root + write /proc/sys/kernel/core_pattern "/data/core/%E.%p.%e" + +#zhuxiaomin @ 20170928 +service iwprivftm /system/bin/sh /system/etc/iwpriv.agent.sh + oneshot + disabled +on property:persist.sys.iwpriv=1 + start iwprivftm + +#++++> +on property:sys.ptt_socket_app=1 + start ptt_ffbm + +on property:sys.ftmd=1 + start ftmd +#<++++ zhuxiaomin @ 20170928 Add for WiFi & BT FFBM test. + +on property:init.svc.wpa_supplicant=stopped + stop dhcpcd + +on property:bluetooth.sap.status=running + start bt-sap + +on property:bluetooth.sap.status=stopped + stop bt-sap + +on property:bluetooth.dun.status=running + start bt-dun + +on property:bluetooth.dun.status=stopped + stop bt-dun + +on property:ro.bluetooth.ftm_enabled=true + start ftmd + +on property:bluetooth.startbtsnoop=true + start btsnoop + +on property:bluetooth.startbtsnoop=false + stop btsnoop + +on property:bluetooth.startbtlogger=true + start bt_logger + +on property:bluetooth.startbtlogger=false + stop bt_logger + +service qcom-c_core-sh /vendor/bin/init.qcom.class_core.sh + class core + user root + oneshot + +service qcom-c_main-sh /vendor/bin/init.class_main.sh + class main + user root + oneshot + +on property:vold.decrypt=trigger_restart_framework + start qcom-c_main-sh + start config_bt_addr + start wcnss-service + +on property:persist.env.fastdorm.enabled=true + setprop persist.radio.data_no_toggle 1 + +service cnd /system/vendor/bin/cnd + class main + user system + group system wifi inet radio wakelock net_admin + +service dpmQmiMgr /system/vendor/bin/dpmQmiMgr + class main + user system + group system + +service irsc_util /vendor/bin/irsc_util "/vendor/etc/sec_config" + class core + user root + oneshot + +service rmt_storage /vendor/bin/rmt_storage + class core + user root + shutdown critical + ioprio rt 0 + +service tftp_server /vendor/bin/tftp_server + class core + user root + +on property:wc_transport.start_hci=true + start start_hci_filter + +on property:wc_transport.start_hci=false + stop start_hci_filter + +service start_hci_filter /system/vendor/bin/wcnss_filter + class late_start + user bluetooth + group bluetooth diag system wakelock + seclabel u:r:bluetooth:s0 + disabled + +service bt-dun /system/bin/dun-server /dev/smd7 /dev/rfcomm0 + class late_start + user bluetooth + group bluetooth net_bt_admin inet + disabled + oneshot + +service bt-sap /system/bin/sapd 15 + user bluetooth + group bluetooth net_bt_admin + class late_start + disabled + oneshot + +service btsnoop /system/bin/btsnoop + user bluetooth + group bluetooth net_bt_admin sdcard_rw sdcard_r media_rw + class late_start + disabled + oneshot + +service bt_logger /system/bin/bt_logger + user bluetooth + group bluetooth net_bt_admin sdcard_rw sdcard_r media_rw + class late_start + disabled + oneshot + +service ftmd /system/bin/logwrapper /system/vendor/bin/ftmdaemon + class late_start + user root + group bluetooth net_bt_admin misc diag net_bt + disabled + oneshot + +service port-bridge /system/vendor/bin/port-bridge + class main + user radio system + group radio system inet + disabled + oneshot + +service qmiproxy /system/bin/qmiproxy + class main + user radio + group radio diag + disabled + +# QMUX must be in multiple groups to support external process connections +service qmuxd /system/vendor/bin/qmuxd + class main + user root + group radio audio bluetooth gps nfc diag + disabled + +service netmgrd /system/vendor/bin/netmgrd + class main + disabled + +service ipacm-diag /system/vendor/bin/ipacm-diag + class main + user radio + socket ipacm_log_file dgram 660 radio radio + group radio diag oem_2901 + disabled + +service ipacm /system/vendor/bin/ipacm + class main + user radio + group radio inet + disabled + +service qti /system/vendor/bin/qti + class main + user radio + group radio oem_2901 diag usb net_admin + disabled + +service sensors /vendor/bin/sensors.qcom + class core + user root + group root + disabled + +on property:ro.use_data_netmgrd=false + # netmgr not supported on specific target + stop netmgrd + +# Adjust socket buffer to enlarge TCP receive window for high bandwidth +# but only if ro.data.large_tcp_window_size property is set. +on property:ro.data.large_tcp_window_size=true + write /proc/sys/net/ipv4/tcp_adv_win_scale 2 + +on property:sys.sysctl.tcp_adv_win_scale=* + write /proc/sys/net/ipv4/tcp_adv_win_scale ${sys.sysctl.tcp_adv_win_scale} + +service amp_init /system/vendor/bin/amploader -i + class late_start + user root + disabled + oneshot + +service amp_load /system/vendor/bin/amploader -l 7000 + class late_start + user root + disabled + oneshot + +service amp_unload /system/vendor/bin/amploader -u + class late_start + user root + disabled + oneshot + +service wpa_supplicant /vendor/bin/hw/wpa_supplicant \ + -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ + -I/vendor/etc/wifi/p2p_supplicant_overlay.conf -N \ + -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ + -I/vendor/etc/wifi/wpa_supplicant_overlay.conf \ + -O/data/misc/wifi/sockets -puse_p2p_group_interface=1 -dd \ + -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 +# we will start as root and wpa_supplicant will switch to user wifi +# after setting up the capabilities required for WEXT +# user wifi +# group wifi inet keystore + class main + socket wpa_wlan0 dgram 660 wifi wifi + disabled + oneshot + +service vendor.wigig_supplicant /vendor/bin/hw/wpa_supplicant \ + -iwigig0 -Dnl80211 -c/data/vendor/wifi/wigig_supplicant.conf \ + -m/data/vendor/wifi/wigig_p2p_supplicant.conf \ + -O/data/vendor/wifi/wigig_sockets -dd \ + -e/data/vendor/wifi/wigig_entropy.bin -g@android:wpa_wigig0 \ + -S wigigsvc + # we will start as root and wpa_supplicant will switch to user wifi + # after setting up the capabilities required for WEXT + # user wifi + # group wifi inet keystore + class main + socket wpa_wigig0 dgram 660 wifi wifi + disabled + oneshot + +# FST Manager with hostapd (softap) - all settings inside ini file +service fstman /vendor/bin/fstman -B -ddd -c /data/vendor/wifi/fstman.ini + user wifi + group wifi net_admin net_raw + class main + disabled + oneshot + +# FST Manager with supplicant - connect to supplicant socket +service fstman_wlan0 /vendor/bin/fstman -B -ddd -c /data/vendor/wifi/fstman.ini @android:wpa_wlan0 + user wifi + group wifi net_admin net_raw + class main + disabled + oneshot + +on property:netd.fstman.start=true + start fstman + +on property:netd.fstman.start=false + stop fstman + +service wigighalsvc /vendor/bin/wigighalsvc + class main + user system + group wifi + disabled + +service wigignpt /vendor/bin/wigignpt + class main + socket wigignpt stream 660 system wifi + user system + group wifi net_admin + disabled + +on property:persist.vendor.wigig.enable=1 + insmod /vendor/lib/modules/wil6210.ko alt_ifname=1 + start wigighalsvc + +on property:persist.vendor.wigig.npt.enable=1 + start wigignpt + +service dhcpcd_wlan0 /system/bin/dhcpcd -ABKLG + class late_start + disabled + oneshot + +service dhcpcd_bond0 /system/bin/dhcpcd -ABKLG + class late_start + disabled + oneshot + +service dhcpcd_p2p /system/bin/dhcpcd -ABKLG + class late_start + disabled + oneshot + +service dhcpcd_wigig0 /system/bin/dhcpcd -ABKLG + class late_start + disabled + oneshot + +service iprenew_wlan0 /system/bin/dhcpcd -n + class late_start + disabled + oneshot + +service iprenew_bond0 /system/bin/dhcpcd -n + class late_start + disabled + oneshot + +service iprenew_p2p /system/bin/dhcpcd -n + class late_start + disabled + oneshot + +service iprenew_wigig0 /system/bin/dhcpcd -n + class late_start + disabled + oneshot + +service ptt_socket_app /system/vendor/bin/ptt_socket_app -d + class main + user root + group root + disabled + oneshot + +service ptt_ffbm /system/vendor/bin/ptt_socket_app -f -d + user root + group root + disabled + oneshot + +service wifi_ftmd /system/vendor/bin/wifi_ftmd + user system + group system inet net_admin + socket wififtmd_server dgram 0660 system system + disabled + oneshot + +on property:wifi.ftmd.load=true + start openwifi +on property:wifi.ftmd.load=false + stop openwifi + + +service cnss-daemon /system/vendor/bin/cnss-daemon -n -l + class late_start + user system + group system inet net_admin wifi + capabilities NET_ADMIN + +on property:sys.shutdown.requested=* + stop cnss-daemon + +service dhcpcd_bt-pan /system/bin/dhcpcd -BKLG + class late_start + disabled + oneshot + +service iprenew_bt-pan /system/bin/dhcpcd -n + class late_start + disabled + oneshot + +service dhcpcd_bnep0 /system/bin/dhcpcd -BKLG + disabled + oneshot + +service dhcpcd_bnep1 /system/bin/dhcpcd -BKLG + disabled + oneshot + +service dhcpcd_bnep2 /system/bin/dhcpcd -BKLG + disabled + oneshot + +service dhcpcd_bnep3 /system/bin/dhcpcd -BKLG + disabled + oneshot + +service dhcpcd_bnep4 /system/bin/dhcpcd -BKLG + disabled + oneshot + +service ssgqmigd /vendor/bin/ssgqmigd + class late_start + user radio + group radio + socket ssgqmig seqpacket 0660 radio inet + +service mlid /vendor/bin/mlid + class late_start + user gps + group gps + socket mlid stream 0666 gps gps + +service loc_launcher /system/vendor/bin/loc_launcher + #loc_launcher will start as root and set its uid to gps + class late_start + group gps inet diag wifi + +on property:crypto.driver.load=1 + insmod /system/lib/modules/qce.ko + insmod /system/lib/modules/qcedev.ko + +service drmdiag /system/vendor/bin/drmdiagapp + class late_start + user root + disabled + oneshot + +on property:drmdiag.load=1 + start drmdiag + +on property:drmdiag.load=0 + stop drmdiag + +service qcom-sh /vendor/bin/init.qcom.sh + class late_start + user root + oneshot + +service sensor-sh /vendor/bin/init.qcom.sensors.sh + class core + user root + oneshot + +service crashdata-sh /vendor/bin/init.qcom.crashdata.sh + class late_start + user root + oneshot + +service qcom-post-boot /vendor/bin/init.qcom.post_boot.sh + class late_start + user root + disabled + oneshot + +service wifi-sdio-on /vendor/bin/init.qcom.sdio.sh + class late_start + group wifi inet + disabled + oneshot + +service wifi-crda /vendor/bin/init.crda.sh + class late_start + user root + disabled + oneshot + +on property:sys.boot_completed=1 + start qcom-post-boot + +service qvop-daemon /vendor/bin/qvop-daemon + class late_start + user system + group system drmrpc + +service atfwd /vendor/bin/ATFWD-daemon + class late_start + user system + group system radio + disabled + +on property:persist.radio.atfwd.start=true + start atfwd + +service hostapd_fst /vendor/bin/hostapd -dd -g /data/vendor/wifi/hostapd/global /data/misc/wifi/hostapd.conf + class late_start + user wifi + group wifi inet keystore net_admin net_raw + oneshot + disabled + +service vendor.wigig_hostapd /vendor/bin/hostapd -dd /data/vendor/wifi/wigig_hostapd.conf + class late_start + user wifi + group wifi inet keystore net_admin net_raw + oneshot + disabled + +service ims_regmanager /system/vendor/bin/exe-ims-regmanagerprocessnative + class late_start + group net_bt_admin inet radio wifi + disabled + +on property:persist.ims.regmanager.mode=1 + start ims_regmanager + +on property:ro.data.large_tcp_window_size=true + # Adjust socket buffer to enlarge TCP receive window for high bandwidth (e.g. DO-RevB) + write /proc/sys/net/ipv4/tcp_adv_win_scale 2 + +service battery_monitor /system/bin/battery_monitor + user system + group system + disabled + +service ril-daemon2 /vendor/bin/hw/rild -c 2 + class main + socket rild2 stream 660 root radio + socket rild-debug2 stream 660 radio system + user radio + disabled + group radio cache inet misc audio sdcard_r sdcard_rw diag oem_2901 log + capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW + +service ril-daemon3 /vendor/bin/hw/rild -c 3 + class main + socket rild3 stream 660 root radio + socket rild-debug3 stream 660 radio system + user radio + disabled + group radio cache inet misc audio sdcard_r sdcard_rw diag oem_2901 log + capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW + +service profiler_daemon /system/bin/profiler_daemon + class late_start + user root + group root + disabled + +service charger /charger + class charger + group system graphics + seclabel u:r:healthd:s0 + +service ssr_diag /system/vendor/bin/ssr_diag + class late_start + user system + group system + disabled + +service hvdcp /system/bin/hvdcp + class core + user root + disabled + +on property:persist.usb.hvdcp.detect=true + start hvdcp + +on property:persist.usb.hvdcp.detect=false + stop hvdcp + +service charger_monitor /system/bin/charger_monitor + user root + group root + disabled + +service qbcharger /charger -m 1 + disabled + oneshot + +on property:sys.qbcharger.enable=true + start qbcharger + +on property:sys.qbcharger.enable=false + stop qbcharger + +service diag_mdlog_start /system/vendor/bin/diag_mdlog + class late_start + user shell + group system diag oem_2901 sdcard_rw sdcard_r media_rw + disabled + oneshot + +service diag_mdlog_stop /system/vendor/bin/diag_mdlog -k + class late_start + user shell + group system diag oem_2901 sdcard_rw sdcard_r media_rw + disabled + oneshot + +on property:persist.sys.mdlog.enable=true + start diag_mdlog_start +on property:persist.sys.mdlog.enable=false + start diag_mdlog_stop + +service qlogd /system/xbin/qlogd + socket qlogd stream 0662 system system + class main + disabled +on property:persist.sys.qlogd=1 + start qlogd +on property:persist.sys.qlogd=0 + stop qlogd + +service vm_bms /vendor/bin/vm_bms + user root + group root + disabled + +service vendor.msm_irqbalance /vendor/bin/msm_irqbalance -f /system/vendor/etc/msm_irqbalance.conf + class core + user root + group root + disabled + +service vendor.msm_irqbal_lb /vendor/bin/msm_irqbalance -f /system/vendor/etc/msm_irqbalance_little_big.conf + class core + user root + group root + disabled + +service vendor.msm_irqbl_sdm630 /vendor/bin/msm_irqbalance -f /system/vendor/etc/msm_irqbalance_sdm630.conf + class core + user root + group root + disabled + +# service for USERDEBUG +service vendor.LKCore-dbg /vendor/bin/LKCore + class late_start + oneshot + disabled + user root + group root system log diag net_raw + +service sdlog /system/bin/sdlog + class late_start + user root + disabled + oneshot + +on property:sys.logd_t2.enable=1 + start sdlog + +on property:sys.logd.enable=1 + start sdlog + +on property:persist.service.logd.enable=1 + start sdlog +on property:persist.service.logd.enable=0 + setprop vendor.sdlog.run 0 + stop sdlog + +# service for USER +service vendor.LKCore-rel /vendor/bin/LKCore + class late_start + oneshot + disabled + user system + group system log diag + +service qseeproxydaemon /system/vendor/bin/qseeproxydaemon + class late_start + user system + group system + +service esepmdaemon /system/vendor/bin/esepmdaemon + class core + user system + group nfc + +on charger + setprop persist.sys.usb.config mass_storage + load_system_props + start qcom-post-boot + +#add poweroffhandler +service poweroffhandler /system/vendor/bin/poweroffhandler + class core + user media + group graphics audio + disabled + oneshot + +on property:init.svc.surfaceflinger=restarting + stop hwcomposer-2-1 + start hwcomposer-2-1 + +# Logcat dump daemon, dumps logs to logdump partition +#service logdumpd /system/bin/logcat -b all -v threadtime -D -w /dev/block/bootdevice/by-name/logdump +# class core +# writepid /dev/cpuset/system-background/tasks +# seclabel u:r:logdumpd:s0 +# disabled + +# Logdumpd is enabled only for userdebug non-perf build +#on property:ro.logdumpd.enabled=1 +# start logdumpd + +service time_daemon /system/vendor/bin/time_daemon + class main + user root + group root + +service qdmastatsd /system/vendor/bin/qdmastatsd + class late_start + user system + group readproc system net_bw_stats radio + +service vppservice /vendor/bin/vppservice + class main + user media + group camera + +# Set vendor-ril lib path based on Meta version +on property:vendor.rild.libpath=* + setprop rild.libpath ${vendor.rild.libpath} + +service seemp_healthd /vendor/bin/seemp_healthd + class late_start + user system + group system + +# blueduttest service for RF BT test. +service blueduttest /vendor/bin/sh /vendor/bin/bluedut.sh + class late_start + user root + group root + disabled + oneshot + +# openwifi service for RF wifi test. +service openwifi /system/bin/sh /vendor/bin/wifitest.sh + class late_start + user root + disabled + oneshot + +# closewifi service for RF wifi test. +service closewifi /system/bin/sh /vendor/bin/wifitest_close.sh + class late_start + user root + disabled + oneshot + +#for wifi myftm test +service myftmftm /vendor/bin/sh /vendor/bin/myftm.agent.sh + oneshot + disabled +on property:persist.sys.myftm=1 + start myftmftm + +#zhufanghua@longcheer.com +service btclose /vendor/bin/sh /vendor/bin/bt_close.sh + user root + group root + oneshot + disabled +on property:sys.closebt=1 + start btclose + +service wdsdaemon /vendor/bin/wdsdaemon -su + user root + group root + oneshot + disabled + +on property:sys.start_wdsdaemon=1 + start wdsdaemon + +on property:sys.start_wdsdaemon=0 + stop wdsdaemon + +#lct add runin +on property:persist.sys.runin=enable + write /sys/class/power_supply/battery/device/BatteryTestStatus 1 + +on property:persist.sys.runin=disable + write /sys/class/power_supply/battery/device/BatteryTestStatus 0 + +#lct add phone call status +on property:sys.thermal.isincall=1 + write /sys/class/power_supply/battery/device/thermalcall 1 + +on property:sys.thermal.isincall=0 + write /sys/class/power_supply/battery/device/thermalcall 0 + +#Add command for PA test begin +service LctDiagSendData /vendor/bin/LctDiagSendData + class core + user root + oneshot + disabled +#on property:persist.sys.lctdiagsenddata=1 +# start LctDiagSendData +#on property:persist.sys.lctdiagsenddata=0 +# stop LctDiagSendData +on property:ro.runtime.firstboot=* + start LctDiagSendData +#Add command for PA test end +service power_off_alarm /vendor/bin/power_off_alarm + class core + group system + disabled + oneshot + +service config_bt_addr /vendor/bin/btnvtool -O + class core + user bluetooth + group bluetooth radio + oneshot diff --git a/rootdir/etc/init.qcom.usb.rc b/rootdir/etc/init.qcom.usb.rc new file mode 100755 index 0000000..2355ce8 --- /dev/null +++ b/rootdir/etc/init.qcom.usb.rc @@ -0,0 +1,1682 @@ +# Copyright (c) 2011-2016, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +on charger + mkdir /dev/usb-ffs 0770 shell shell + mkdir /dev/usb-ffs/adb 0770 shell shell + mount configfs none /config + mkdir /config/usb_gadget/g1 0770 shell shell + mkdir /config/usb_gadget/g1/strings/0x409 0770 shell shell + write /config/usb_gadget/g1/bcdUSB 0x0200 + write /config/usb_gadget/g1/os_desc/use 1 + write /config/usb_gadget/g1/strings/0x409/serialnumber ${ro.serialno} + write /config/usb_gadget/g1/strings/0x409/manufacturer ${ro.product.manufacturer} + write /config/usb_gadget/g1/strings/0x409/product ${ro.product.model} + mkdir /config/usb_gadget/g1/functions/mass_storage.0 + mkdir /config/usb_gadget/g1/functions/ffs.adb + mkdir /config/usb_gadget/g1/configs/b.1 0770 shell shell + mkdir /config/usb_gadget/g1/configs/b.1/strings/0x409 0770 shell shell + write /config/usb_gadget/g1/os_desc/b_vendor_code 0x1 + write /config/usb_gadget/g1/os_desc/qw_sign "MSFT100" + symlink /config/usb_gadget/g1/configs/b.1 /config/usb_gadget/g1/os_desc/b.1 + write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "msc" + write /config/usb_gadget/g1/idVendor 0x05C6 + write /config/usb_gadget/g1/idProduct 0xF000 + symlink /config/usb_gadget/g1/functions/mass_storage.0 /config/usb_gadget/g1/configs/b.1/f1 + setprop sys.usb.controller "a800000.dwc3" + write /config/usb_gadget/g1/UDC ${sys.usb.controller} + setprop sys.usb.state ${sys.usb.config} + mount functionfs adb /dev/usb-ffs/adb uid=2000,gid=2000 + write /sys/class/android_usb/android0/f_ffs/aliases adb + enable qcom-usb-sh + start qcom-usb-sh + +on boot + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + mkdir /dev/usb-ffs 0770 shell shell + mkdir /dev/usb-ffs/adb 0770 shell shell + mount configfs none /config + mkdir /config/usb_gadget/g1 0770 shell shell + mkdir /config/usb_gadget/g1/strings/0x409 0770 shell shell + write /config/usb_gadget/g1/bcdUSB 0x0200 + write /config/usb_gadget/g1/os_desc/use 1 + write /config/usb_gadget/g1/strings/0x409/serialnumber ${ro.serialno} + write /config/usb_gadget/g1/strings/0x409/manufacturer ${ro.product.manufacturer} + write /config/usb_gadget/g1/strings/0x409/product ${ro.product.model} + mkdir /config/usb_gadget/g1/functions/mass_storage.0 + mkdir /config/usb_gadget/g1/functions/mtp.gs0 + mkdir /config/usb_gadget/g1/functions/ptp.gs1 + mkdir /config/usb_gadget/g1/functions/accessory.gs2 + mkdir /config/usb_gadget/g1/functions/audio_source.gs3 + mkdir /config/usb_gadget/g1/functions/midi.gs5 + mkdir /config/usb_gadget/g1/functions/ffs.adb + mkdir /config/usb_gadget/g1/functions/diag.diag + mkdir /config/usb_gadget/g1/functions/diag.diag_mdm + mkdir /config/usb_gadget/g1/functions/cser.dun.0 + mkdir /config/usb_gadget/g1/functions/cser.nmea.1 + mkdir /config/usb_gadget/g1/functions/cser.dun.2 + mkdir /config/usb_gadget/g1/functions/gsi.rmnet + mkdir /config/usb_gadget/g1/functions/gsi.rndis + mkdir /config/usb_gadget/g1/functions/gsi.dpl + mkdir /config/usb_gadget/g1/functions/qdss.qdss + mkdir /config/usb_gadget/g1/functions/qdss.qdss_mdm + mkdir /config/usb_gadget/g1/functions/rndis_bam.rndis + mkdir /config/usb_gadget/g1/functions/rmnet_bam.rmnet + mkdir /config/usb_gadget/g1/functions/rmnet_bam.dpl + mkdir /config/usb_gadget/g1/functions/ncm.0 + mkdir /config/usb_gadget/g1/functions/ccid.ccid + mkdir /config/usb_gadget/g1/configs/b.1 0770 shell shell + mkdir /config/usb_gadget/g1/configs/b.1/strings/0x409 0770 shell shell + write /config/usb_gadget/g1/os_desc/b_vendor_code 0x1 + write /config/usb_gadget/g1/os_desc/qw_sign "MSFT100" + symlink /config/usb_gadget/g1/configs/b.1 /config/usb_gadget/g1/os_desc/b.1 + mount functionfs adb /dev/usb-ffs/adb uid=2000,gid=2000 + write /sys/class/android_usb/android0/f_ffs/aliases adb + enable qcom-usb-sh + +service qcom-usb-sh /vendor/bin/init.qcom.usb.sh + class core + user root + oneshot + disabled + +# Following are the parameters required for usb functionality. They provide configurable options like +# product_id/vendor id and allows specifying required functions: +# +# Required parameters: +# +# /sys/class/android_usb/android0/enable: Enables/disables usb composition +# Value: 0 (disable), 1 (enable) +# +# /sys/class/android_usb/android0/idVendor: Stores Vendor ID +# Value: 05c6 (Vendor id for Qualcomm Inc) +# +# /sys/class/android_usb/android0/idProduct: Stores Product id corresponding to usb composition +# Value: 0x9xxx for composite interface, 0xFxxx for single interface +# +# /sys/class/android_usb/android0/f_diag/clients: Stores name of clients representing a diag interface. +# Value: Passed one per interface. e.g. diag[,diag_mdm, diag_qsc, diag_mdm2] +# +# /sys/class/android_usb/android0/functions: Stores name of the function drivers used in usb composition. +# Value: Passed one per function driver. e.g. diag[,adb] +# +#Optional parameters: +# +# /sys/class/android_usb/android0/f_serial/transports: Stores type of underlying transports used to +# communicate to serial interface. +# Value: Passed one per interface. One value represents control and data transport together. +# e.g. smd[,sdio,tty,hsic] +# Only required if serial interface is present. +# +# /sys/class/android_usb/android0/f_serial/transport_names: Stores name of the underlying transports +# used to communicate to serial interface. This is used to distinguish between more than one interface +# using same transport type. +# Value: Passed one per interface. One value represents control and data transport together. +# e.g. serial_hsic[,serial_hsusb] +# Only required for transport type hsic, optional for other transport types. +# +# /sys/class/android_usb/android0/f_rmnet/transports: Stores type of underlying transports used to +# communicate to rmnet interface. +# Value: Passed two per interface as control, data transport type pair. +# e.g. smd,bam[,hsuart,hsuart] +# Only required if rmnet interface is present. +# +# /sys/class/android_usb/android0/f_rmnet/transport_names: Stores name of the underlying transports +# used to communicate to rmnet interface. This is used to distinguish between more than one interface +# using same transport type. +# Value: Passed one per interface. One value represents control and data transport together. +# e.g. rmnet_hsic[,rmnet_hsusb] +# Only required for transport type hsic, optional for other transport types. + +# USB compositions +on property:sys.usb.config=diag,serial_tty,serial_smd && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9002 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports tty,smd + write /sys/class/android_usb/android0/functions diag,serial + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_tty,serial_smd,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9020 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd,tty + write /sys/class/android_usb/android0/functions diag,adb,serial + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 901D + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/functions diag,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 900E + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/functions diag + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_bam,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9091 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/functions diag,serial,rmnet,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_qti_bam,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9091 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam + write /sys/class/android_usb/android0/functions diag,serial,rmnet,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_bam && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9092 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/functions diag,serial,rmnet + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_qti_bam && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9092 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam + write /sys/class/android_usb/android0/functions diag,serial,rmnet + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9025 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports char_bridge,tty + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9026 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports char_bridge,tty + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_bam,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9025 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd,tty + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,acm_smd,acm_tty,rmnet_bam,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903D + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_acm/acm_transports smd,tty + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_bam,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9026 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd,tty + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,acm_smd,acm_tty,rmnet_bam,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903E + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_acm/acm_transports smd,tty + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,serial_sdio,serial_smd,rmnet_smd_sdio,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9037 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports sdio,smd + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet_smd_sdio,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,acm_sdio,acm_smd,rmnet_smd_sdio,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903B + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_acm/acm_transports sdio,smd + write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet_smd_sdio,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,serial_sdio,serial_smd,rmnet_smd_sdio,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9038 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports sdio,smd + write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd_sdio,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,acm_sdio,acm_smd,rmnet_smd_sdio,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903C + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_acm/acm_transports sdio,smd + write /sys/class/android_usb/android0/functions diag,acm,rmnet_smd_sdio,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,serial_sdio,serial_tty,rmnet_sdio,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9031 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports sdio,tty + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet_sdio,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,acm_sdio,acm_tty,rmnet_sdio,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903B + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_acm/acm_transports sdio,tty + write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet_sdio,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,serial_sdio,serial_tty,rmnet_sdio,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9032 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports sdio,tty + write /sys/class/android_usb/android0/functions diag,serial,rmnet_sdio,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,acm_sdio,acm_tty,rmnet_sdio,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903C + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_acm/acm_transports sdio,tty + write /sys/class/android_usb/android0/functions diag,acm,rmnet_sdio,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_tty,serial_tty,rmnet_smd,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9025 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports tty,tty + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet_smd,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + start port-bridge + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,acm_tty,acm_tty,rmnet_smd,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903D + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_acm/acm_transports tty,tty + write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet_smd,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + start port-bridge + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_tty,serial_tty,rmnet_smd,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9026 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports tty,tty + write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd,mass_storage + write /sys/class/android_usb/android0/enable 1 + start port-bridge + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,acm_tty,acm_tty,rmnet_smd,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903E + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_acm/acm_transports tty,tty + write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_smd,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9025 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd,tty + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet_smd,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,acm_smd,acm_tty,rmnet_smd,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903D + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_acm/acm_transports smd,tty + write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet_smd,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + start port-bridge + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_smd,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9026 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd,tty + write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,acm_smd,acm_tty,rmnet_smd,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903E + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_acm/acm_transports smd,tty + write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +# RmNet using USB BAM to IPA BAM +on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_ipa,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9025 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd,tty + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_ipa,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9026 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd,tty + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_ipa,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9091 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,serial,rmnet,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_ipa && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9092 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,serial,rmnet + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +# Fusion 3 composition +on property:sys.usb.config=diag,serial_hsic,serial_tty,rmnet_hsic,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9025 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports hsic,tty + write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic + write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384 + write /sys/module/mdm_bridge/parameters/max_rx_urbs 20 + write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384 + write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# Fusion 3 composition with diag_mdm and adb +on property:sys.usb.config=diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9031 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports hsic,tty + write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic + write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384 + write /sys/module/mdm_bridge/parameters/max_rx_urbs 20 + write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384 + write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# Fusion 3 composition with diag_mdm +on property:sys.usb.config=diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9032 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports hsic,tty + write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic + write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384 + write /sys/module/mdm_bridge/parameters/max_rx_urbs 20 + write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384 + write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20 + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +# Fusion 3 DSDA composition with adb +on property:sys.usb.config=diag,diag_mdm,diag_qsc,serial_hsic,serial_hsuart,rmnet_hsic,rmnet_hsuart,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9065 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc + write /sys/class/android_usb/android0/f_serial/transports hsic,hsuart + write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic,serial_hsuart + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic,hsuart,hsuart + write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic,rmnet_hsuart + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384 + write /sys/module/mdm_bridge/parameters/max_rx_urbs 20 + write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384 + write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# Fusion 3 DSDA composition without adb +on property:sys.usb.config=diag,diag_mdm,diag_qsc,serial_hsic,serial_hsuart,rmnet_hsic,rmnet_hsuart,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9066 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc + write /sys/class/android_usb/android0/f_serial/transports hsic,hsuart + write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic,serial_hsuart + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic,hsuart,hsuart + write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic,rmnet_hsuart + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384 + write /sys/module/mdm_bridge/parameters/max_rx_urbs 20 + write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384 + write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20 + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +# Fusion 3 DSDA2 composition with adb +on property:sys.usb.config=diag,diag_mdm,diag_mdm2,serial_hsic,serial_hsusb,rmnet_hsic,rmnet_hsusb,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9065 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_mdm2 + write /sys/class/android_usb/android0/f_serial/transports hsic,hsic + write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic,serial_hsusb + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic,hsic,hsic + write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic,rmnet_hsusb + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384 + write /sys/module/mdm_bridge/parameters/max_rx_urbs 20 + write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384 + write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# Fusion 3 DSDA2 composition without adb +on property:sys.usb.config=diag,diag_mdm,diag_mdm2,serial_hsic,serial_hsusb,rmnet_hsic,rmnet_hsusb,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9066 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_mdm2 + write /sys/class/android_usb/android0/f_serial/transports hsic,hsic + write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic,serial_hsusb + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic,hsic,hsic + write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic,rmnet_hsusb + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384 + write /sys/module/mdm_bridge/parameters/max_rx_urbs 20 + write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384 + write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20 + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +# Fusion PCIe composition with diag_mdm and adb +# Serial & RmNet bridged in userspace with tty and qti/ether +on property:sys.usb.config=diag,diag_mdm,serial_tty,rmnet_qti_ether,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9035 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports tty + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# Fusion PCIe composition with diag_mdm +# Serial & RmNet bridged in userspace with tty and qti/ether +on property:sys.usb.config=diag,diag_mdm,serial_hsic,rmnet_hsic,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9036 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports tty + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +# Fusion HSIC/PCIe Hybrid composition with diag_mdm and adb +# RmNet is bridged over PCIe using qti,ether ctrl/data transports +on property:sys.usb.config=diag,diag_mdm,serial_hsic,rmnet_qti_ether,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9035 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports hsic + write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# Fusion HSIC/PCIe Hybrid composition with diag_mdm +# RmNet is bridged over PCIe using qti,ether ctrl/data transports +on property:sys.usb.config=diag,diag_mdm,serial_hsic,rmnet_hsic,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9036 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports hsic + write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +# Fusion PCIe composition with diag_mdm +# Serial & RmNet bridged in userspace with port bridge and qti/ether +on property:sys.usb.config=diag,diag_mdm,serial_cdev,rmnet_qti_ether,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9036 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports char_bridge + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,serial_cdev,rmnet_qti_ether,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9035 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports char_bridge + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# Fusion 2.2 composition with diag_qsc and adb +on property:sys.usb.config=diag,diag_qsc,serial_smd,serial_tty,serial_hsuart,rmnet_hsuart,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9053 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_qsc + write /sys/class/android_usb/android0/f_serial/transports smd,tty,hsuart + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam,hsuart,hsuart + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# Fusion 2.2 composition with diag_qsc +on property:sys.usb.config=diag,diag_qsc,serial_smd,serial_tty,serial_hsuart,rmnet_hsuart,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9054 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_qsc + write /sys/class/android_usb/android0/f_serial/transports smd,tty,hsuart + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam,hsuart,hsuart + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.tethering=true + write /sys/class/net/rndis0/queues/rx-0/rps_cpus ${sys.usb.rps_mask} + +on property:sys.usb.config=rndis + setprop sys.usb.config rndis,${persist.sys.usb.config.extra} + +on property:sys.usb.config=rndis,none && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 2717 + write /sys/class/android_usb/android0/idProduct FF80 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/functions rndis + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,adb && property:sys.usb.configfs=0 + setprop sys.usb.config rndis,${persist.sys.usb.config.extra},adb + +on property:sys.usb.config=rndis,none,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 2717 + write /sys/class/android_usb/android0/idProduct FF88 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/functions rndis,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=rndis,diag && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 902C + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/functions rndis,diag + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,diag,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 902D + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/functions rndis,diag,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state rndis,adb + +# DPL is implemented using QDSS +on property:sys.usb.config=rndis,diag,dpl && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90BF + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions rndis,diag,qdss + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state rndis + +# DPL is implemented using QDSS +on property:sys.usb.config=rndis,diag,dpl,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90C0 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions rndis,diag,qdss,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=rndis,serial_smd && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B3 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/functions rndis,serial + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,serial_smd,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B4 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/functions rndis,serial,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=rndis,serial_smd,diag && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B5 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/functions rndis,serial,diag + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,serial_smd,diag,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B6 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/functions rndis,serial,diag,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=rndis,serial_cdev,diag && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B5 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports char_bridge + write /sys/class/android_usb/android0/functions rndis,serial,diag + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,serial_cdev,diag,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B6 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports char_bridge + write /sys/class/android_usb/android0/functions rndis,serial,diag,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=rndis,diag,diag_mdm && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9041 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/functions rndis,diag + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,diag,diag_mdm,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9042 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/functions rndis,diag,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=rndis,diag,diag_mdm,diag_qsc && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9086 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc + write /sys/class/android_usb/android0/functions rndis,diag + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state rndis + +on property:sys.usb.config=rndis,diag,diag_mdm,diag_qsc,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9087 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc + write /sys/class/android_usb/android0/functions rndis,diag,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state rndis,adb + +on property:sys.usb.config=ptp && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 2717 + write /sys/class/android_usb/android0/idProduct FF10 + write /sys/class/android_usb/android0/functions ptp + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=ptp,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 2717 + write /sys/class/android_usb/android0/idProduct FF18 + write /sys/class/android_usb/android0/functions ptp,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mtp && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 2717 + write /sys/class/android_usb/android0/idProduct FF40 + write /sys/class/android_usb/android0/functions mtp + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mtp,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 2717 + write /sys/class/android_usb/android0/idProduct FF48 + write /sys/class/android_usb/android0/functions mtp,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mtp,diag && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 901B + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/functions mtp,diag + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mtp,diag,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903A + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/functions mtp,diag,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mtp,diag,diag_mdm && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9040 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/functions mtp,diag + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mtp,diag,diag_mdm,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 903F + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/functions mtp,diag,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mtp,diag,diag_mdm,diag_qsc && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9088 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc + write /sys/class/android_usb/android0/functions mtp,diag + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mtp,diag,diag_mdm,diag_qsc,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9089 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc + write /sys/class/android_usb/android0/functions mtp,diag,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,ccid && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9045 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/functions diag,ccid + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,ccid,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9044 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/functions diag,adb,ccid + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9015 + write /sys/class/android_usb/android0/functions adb,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +#Mass-storage only composition +on property:sys.usb.config=mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct F000 + write /sys/class/android_usb/android0/functions mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 904A + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9060 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9099 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9098 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,rmnet_bam && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9083 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,rmnet + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,rmnet_qti_bam && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9083 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,rmnet + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,rmnet_bam,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9084 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet + write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,rmnet_qti_bam,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9084 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet + write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,rmnet_ipa && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9083 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,rmnet + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,qdss,rmnet_ipa,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9084 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet + write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss,rmnet_hsic && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 909B + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,rmnet + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss,rmnet_hsic,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 909A + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet + write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss_apq,qdss_mdm,rmnet_hsic && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90A3 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports bam,hsic + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam,qdss_hsic + write /sys/class/android_usb/android0/functions diag,qdss,rmnet + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss_apq,qdss_mdm,rmnet && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90A3 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports none,bam,none,pcie + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam,qdss_pcie + write /sys/class/android_usb/android0/functions diag,qdss,rmnet + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss_apq,qdss_mdm,rmnet_hsic,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90A2 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports bam,hsic + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam,qdss_hsic + write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet + write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,qdss_apq,qdss_mdm,rmnet,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90A2 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports none,bam,none,pcie + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam,qdss_pcie + write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet + write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=rndis,diag,qdss && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9081 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions rndis,diag,qdss + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=rndis,diag,qdss,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 9082 + write /sys/class/android_usb/android0/f_rndis/wceis 1 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_qdss/debug_intf 1 + write /sys/class/android_usb/android0/f_qdss/transports bam + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/functions rndis,diag,qdss,adb + write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1 + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# same as 9025, plus data packet logging (DPL) using QDSS +on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_ipa,mass_storage,dpl,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90AD + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd,tty +# DPL is implemented using QDSS + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage,qdss + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +# same as 9026, plus data packet logging (DPL) +on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_ipa,mass_storage,dpl && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B0 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd,tty +# DPL is implemented using QDSS + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage,qdss + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,dpl,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90AD + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports char_bridge,tty +# DPL is implemented using QDSS + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage,qdss + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,dpl && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B0 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports char_bridge,tty +# DPL is implemented using QDSS + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage,qdss + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=ncm && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 0525 + write /sys/class/android_usb/android0/idProduct A4A1 + write /sys/class/android_usb/android0/functions ncm + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=ncm,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 908C + write /sys/class/android_usb/android0/functions ncm,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=charging && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 2717 + write /sys/class/android_usb/android0/idProduct FF00 + write /sys/class/android_usb/android0/functions charging + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_qti_bam,dpl_qti_bam_dmux && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B7 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam + write /sys/class/android_usb/android0/f_qdss/transports qti,bam_dmux + write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_qti_bam,dpl_qti_bam_dmux,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B8 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam + write /sys/class/android_usb/android0/f_qdss/transports qti,bam_dmux + write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_cnss,serial_smd,serial_tty,rmnet_bam,mass_storage,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B2 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_cnss + write /sys/class/android_usb/android0/f_serial/transports smd,tty + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/functions diag,diag_cnss,adb,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_cnss,serial_smd,serial_tty,rmnet_bam,mass_storage && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B3 + write /sys/class/android_usb/android0/f_diag/clients diag,diag_cnss + write /sys/class/android_usb/android0/f_serial/transports smd,tty + write /sys/class/android_usb/android0/f_rmnet/transports smd,bam + write /sys/class/android_usb/android0/functions diag,diag_cnss,serial,rmnet,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=midi && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90BA + write /sys/class/android_usb/android0/functions midi + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=midi,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90BB + write /sys/class/android_usb/android0/functions midi,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_ipa,dpl && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B7 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd +# DPL is implemented using QDSS + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,serial_smd,rmnet_ipa,dpl,adb && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/iSerial ${ro.serialno} + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90B8 + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/f_serial/transports smd +# DPL is implemented using QDSS + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam + write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa + write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss,adb + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,serial_tty,rmnet_qti_ether,dpl_ether,mass_storage,adb + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90AE + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports tty + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,ether + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_dpl + write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,qdss,mass_storage + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,diag_mdm,serial_tty,rmnet_qti_ether,dpl_ether,mass_storage + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90AF + write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm + write /sys/class/android_usb/android0/f_serial/transports tty + write /sys/class/android_usb/android0/f_rmnet/transports qti,ether + write /sys/class/android_usb/android0/f_qdss/debug_intf 0 + write /sys/class/android_usb/android0/f_qdss/transports qti,ether + write /sys/class/android_usb/android0/f_qdss/transport_names qdss_dpl + write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss,mass_storage + write /sys/class/android_usb/android0/enable 1 + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,adb,uac2 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90CA + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/functions diag,adb,uac2_func + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,adb,video && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90CB + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/functions diag,adb,video + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + +on property:sys.usb.config=diag,adb,uac2,video && property:sys.usb.configfs=0 + write /sys/class/android_usb/android0/enable 0 + write /sys/class/android_usb/android0/idVendor 05C6 + write /sys/class/android_usb/android0/idProduct 90CC + write /sys/class/android_usb/android0/f_diag/clients diag + write /sys/class/android_usb/android0/functions diag,adb,uac2_func,video + write /sys/class/android_usb/android0/enable 1 + start adbd + setprop sys.usb.state ${sys.usb.config} + diff --git a/rootdir/etc/init.target.rc b/rootdir/etc/init.target.rc old mode 100644 new mode 100755 index 2213bce..2f9f8b4 --- a/rootdir/etc/init.target.rc +++ b/rootdir/etc/init.target.rc @@ -40,6 +40,8 @@ on init write /dev/stune/system-background/schedtune.colocate 0 write /dev/stune/foreground/schedtune.colocate 0 write /dev/stune/top-app/schedtune.colocate 1 + chown media media /dev/dbmdx-1 + chmod 0770 /dev/dbmdx-1 on fs wait /dev/block/platform/soc/${ro.boot.bootdevice} @@ -51,12 +53,23 @@ on fs # these partition flashed on the device. Failure to mount any partition in fstab file # results in failure to launch late-start class. - wait /dev/block/bootdevice/by-name/persist - mount ext4 /dev/block/bootdevice/by-name/persist /persist nosuid nodev noatime barrier=1 mkdir /persist/data 0700 system system mkdir /persist/bms 0700 root system restorecon_recursive /persist + mkdir /persist/wlan_bt 0777 root system + #add by Quanyu.Lee for MI-feature + #only needed on Factory version,DO NOT push to MIUI! + chmod 0644 /persist/wlan_bt/bt.mac + chmod 0644 /persist/wlan_bt/wlan.mac + chown system system /persist/wlan_bt/bt.mac + chown system system /persist/wlan_bt/wlan.mac + write /sys/kernel/boot_adsp/boot 1 + chown system system /dev/goodix_fp + #chmod 0644 /dev/goodix_fp + + chmod 0664 /sys/class/thermal/thermal_message/sconfig + chown system system /sys/class/thermal/thermal_message/sconfig on post-fs start qseecomd @@ -75,6 +88,9 @@ on post-fs-data mkdir /persist/qti_fp 0700 system system mkdir /data/misc/seemp 0700 system system mkdir /data/misc/tloc 0700 system drmrpc + mkdir /data/thermal 0771 system system + mkdir /data/thermal/config 0771 system system + start pa-cal-load on boot start rmt_storage @@ -101,9 +117,9 @@ on boot chown system system /persist/speccfg/vendor_persist.prop chown system system /persist/speccfg/submask chown system system /persist/speccfg/partition - #Load WLAN driver - insmod /vendor/lib/modules/qca_cld3/qca_cld3_wlan.ko + insmod -f /vendor/lib/modules/qca_cld3/qca_cld3_wlan.ko + chown wifi wifi /sys/module/wlan/parameters/fwpath setprop wlan.driver.status "ok" #Peripheral manager @@ -193,11 +209,6 @@ service time_daemon /system/vendor/bin/time_daemon user root group root -service adsprpcd_root /system/bin/adsprpcd - class main - user media - group media - service adsprpcd /system/vendor/bin/adsprpcd audiopd class main user media @@ -371,10 +382,12 @@ service vendor.imsrcsservice /system/vendor/bin/imsrcsd group radio diag inet log disabled +# add for HMI_L8866_A01-502: begin on property:vendor.ims.DATA_DAEMON_STATUS=1 start ims_rtp_daemon start vendor.imsrcsservice - + setprop persist.rcs.supported 0 +# add for HMI_L8866_A01-502: end service ppd /system/vendor/bin/mm-pp-dpps class late_start @@ -453,3 +466,207 @@ service smcinvoked /system/bin/smcinvoked user system group system +# smart pa cal wangshiyou 11/09 +service smart-pa-tfa-cal /system/vendor/bin/smart-pa-tfa-cal + user root + group root + disabled + oneshot + +# smart pa cal tsx 08/26 +service pa-cal-load /system/vendor/bin/smart-pa-cal -load + user root + group root + disabled + oneshot + +# smart pa cal tsx 08/26 +service smart-pa-cal /system/vendor/bin/smart-pa-cal -t 25 -c /system/vendor/etc/speaker.ftcfg -v -u + user root + group root + disabled + oneshot + +on property:sys.pa-cal=0 + stop smart-pa-cal + +on property:sys.pa-cal=1 + start smart-pa-cal + +on property:sys.pa-tfa-cal=0 + stop smart-pa-tfa-cal + +on property:sys.pa-tfa-cal=1 + start smart-pa-tfa-cal + +# audio loopback test begin tsx 08/26 +service loopback_spk1 /system/vendor/bin/loopback.sh 1 1 + user root + group root + disabled + oneshot + +service loopback_spk0 /system/vendor/bin/loopback.sh 1 0 + user root + group root + disabled + oneshot + +service loopback_rec1 /system/vendor/bin/loopback.sh 2 1 + user root + group root + disabled + oneshot + +service loopback_rec0 /system/vendor/bin/loopback.sh 2 0 + user root + group root + disabled + oneshot + +service loopback_hand1 /system/vendor/bin/loopback.sh 3 1 + user root + group root + disabled + oneshot + +service loopback_hand0 /system/vendor/bin/loopback.sh 3 0 + user root + group root + disabled + oneshot + +service loopback_sec1 /system/vendor/bin/loopback.sh 4 1 + user root + group root + disabled + oneshot + +service loopback_sec0 /system/vendor/bin/loopback.sh 4 0 + user root + group root + disabled + oneshot + +service spk_playback1 /system/vendor/bin/loopback.sh 5 1 + user root + group root + disabled + oneshot + +service spk_playback0 /system/vendor/bin/loopback.sh 5 0 + user root + group root + disabled + oneshot + +on property:sys.loopback-spk=1 + start loopback_spk1 + +on property:sys.loopback-spk=0 + start loopback_spk0 + +on property:sys.loopback-rec=1 + start loopback_rec1 + +on property:sys.loopback-rec=0 + start loopback_rec0 + +on property:sys.loopback-mic1=1 + start loopback_hand1 + +on property:sys.loopback-mic1=0 + start loopback_hand0 + +on property:sys.loopback-mic2=1 + start loopback_sec1 + +on property:sys.loopback-mic2=0 + start loopback_sec0 + +on property:sys.spk-playback=1 + start spk_playback1 + +on property:sys.spk-playback=0 + start spk_playback0 + +service tinyhostless_spk /system/vendor/bin/tinyhostless -D 0 -P 35 -C 11 -p 8 -n 2 -c 1 -r 48000 + user root + group root + disabled + oneshot + +service tinyhostless /system/vendor/bin/tinyhostless -D 0 -P 5 -C 11 -p 8 -n 2 -c 1 -r 48000 + user root + group root + disabled + oneshot + +on property:sys.tinyhostless=0 + stop tinyhostless + +on property:sys.tinyhostless=1 + start tinyhostless + +on property:sys.tinyhostless-spk=0 + stop tinyhostless_spk + +on property:sys.tinyhostless-spk=1 + start tinyhostless_spk + +#audio loopback test end +on property:persist.sys.display_srgb=1 + write /sys/class/graphics/fb0/msm_fb_srgb 1 + +on property:persist.sys.display_srgb=2 + write /sys/class/graphics/fb0/msm_fb_srgb 2 + +on property:sys.dynamic_debug=1 + write /sys/kernel/debug/dynamic_debug/control "file q6afe.c +p" + write /sys/kernel/debug/dynamic_debug/control "file q6adm.c +p" + write /sys/kernel/debug/dynamic_debug/control "file msm-pcm-routing-v2.c +p" + write /sys/kernel/debug/dynamic_debug/control "file msm-dai-q6-v2.c +p" + write /sys/kernel/debug/dynamic_debug/control "file soc-core.c +p" + write /sys/kernel/debug/dynamic_debug/control "file soc-dapm.c +p" + write /sys/kernel/debug/dynamic_debug/control "file sdm660-internal.c +p" + write /sys/kernel/debug/dynamic_debug/control "file sdm660-common.c +p" + write /sys/kernel/debug/dynamic_debug/control "file msm-analog-cdc.c +p" + write /sys/kernel/debug/dynamic_debug/control "file msm-digital-cdc.c +p" + write /sys/kernel/debug/dynamic_debug/control "file wcd-mbhc-v2.c +p" + +on property:sys.dynamic_debug=0 + write /sys/kernel/debug/dynamic_debug/control "file q6afe.c -p" + write /sys/kernel/debug/dynamic_debug/control "file q6adm.c -p" + write /sys/kernel/debug/dynamic_debug/control "file msm-pcm-routing-v2.c -p" + write /sys/kernel/debug/dynamic_debug/control "file msm-dai-q6-v2.c -p" + write /sys/kernel/debug/dynamic_debug/control "file soc-core.c -p" + write /sys/kernel/debug/dynamic_debug/control "file soc-dapm.c -p" + write /sys/kernel/debug/dynamic_debug/control "file sdm660-internal.c -p" + write /sys/kernel/debug/dynamic_debug/control "file sdm660-common.c -p" + write /sys/kernel/debug/dynamic_debug/control "file msm-analog-cdc.c -p" + write /sys/kernel/debug/dynamic_debug/control "file msm-digital-cdc.c -p" + write /sys/kernel/debug/dynamic_debug/control "file wcd-mbhc-v2.c -p" + +on property:persist.sys.display_ce=4 + write /sys/class/graphics/fb0/msm_fb_ce 1 + +on property:persist.sys.display_ce=0 + write /sys/class/graphics/fb0/msm_fb_ce 2 + +on property:persist.sys.display_cabc=1 + write /sys/class/graphics/fb0/msm_fb_cabc 1 + +on property:persist.sys.display_cabc=2 + write /sys/class/graphics/fb0/msm_fb_cabc 2 + +on property:persist.sys.display_gamma=1 + write /sys/class/graphics/fb0/msm_fb_gamma 1 + +on property:persist.sys.display_gamma=2 + write /sys/class/graphics/fb0/msm_fb_gamma 2 + +on property:sys.antgpio=0 + write /sys/class/ant_class/ant_state 0 + +on property:sys.antgpio=1 + write /sys/class/ant_class/ant_state 1 diff --git a/rootdir/etc/recovery.fstab b/rootdir/etc/recovery.fstab index e9a36ce..bcc6edf 100644 --- a/rootdir/etc/recovery.fstab +++ b/rootdir/etc/recovery.fstab @@ -2,27 +2,23 @@ # The filesystem that contains the filesystem checker binary (typically /system) cannot # specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK -# mount point fstype device device2 flags -/boot emmc /dev/block/bootdevice/by-name/boot -/cache ext4 /dev/block/bootdevice/by-name/cache -/data ext4 /dev/block/bootdevice/by-name/userdata flags=encryptable=footer -/misc emmc /dev/block/bootdevice/by-name/misc -/recovery emmc /dev/block/bootdevice/by-name/recovery flags=backup=1 -/system ext4 /dev/block/bootdevice/by-name/system -/system_image emmc /dev/block/bootdevice/by-name/system -/vendor ext4 /dev/block/bootdevice/by-name/vendor flags=display="vendor";backup=1;wipeingui -/firmware vfat /dev/block/bootdevice/by-name/modem flags=display="Firmware";mounttodecrypt;fsflags=ro -/cust ext4 /dev/block/bootdevice/by-name/cust -/modem emmc /dev/block/bootdevice/by-name/modem flags=backup=1;display="Modem" -/bluetooth emmc /dev/block/bootdevice/by-name/bluetooth flags=backup=1;subpartitionof=/modem -/dsp emmc /dev/block/bootdevice/by-name/dsp flags=backup=1;subpartitionof=/modem -/efs1 emmc /dev/block/bootdevice/by-name/modemst1 flags=backup=1;display=EFS -/efs2 emmc /dev/block/bootdevice/by-name/modemst2 flags=backup=1;subpartitionof=/efs1 -/efsg emmc /dev/block/bootdevice/by-name/fsg flags=backup=1;subpartitionof=/efs1 -/efsc emmc /dev/block/bootdevice/by-name/fsc flags=backup=1;subpartitionof=/efs1 - -# Removable storage -/usb_otg vfat /dev/block/sda1 /dev/block/sda flags=fsflags=utf8;display="USB-OTG";storage;wipeingui;removable -/external_sd vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 flags=fsflags=utf8;display="SDcard";storage;wipeingui;removable - +#TODO: Add 'check' as fs_mgr_flags with data partition. +# Currently we dont have e2fsck compiled. So fs check would failed. +# Non-A/B fstab.qcom variant +# +/dev/block/bootdevice/by-name/boot /boot emmc defaults defaults +/dev/block/bootdevice/by-name/recovery /recovery emmc defaults defaults +/dev/block/bootdevice/by-name/system /system ext4 ro wait +/dev/block/bootdevice/by-name/vendor /vendor ext4 ro wait +/dev/block/bootdevice/by-name/userdata /data ext4 nosuid,nodev,noauto_da_alloc,noatime,lazytime,errors=panic wait,resize,check,reservedsize=128M,encryptable=footer,quota,formattable +/devices/soc/c084000.sdhci/mmc_host* /storage/sdcard1 vfat nosuid,nodev wait,voldmanaged=sdcard1:auto,encryptable=footer +/dev/block/bootdevice/by-name/cust /cust ext4 ro,nosuid,nodev wait,check +/dev/block/bootdevice/by-name/misc /misc emmc defaults defaults +/dev/block/bootdevice/by-name/modem /firmware vfat ro,shortname=lower,uid=1000,gid=1000,dmask=227,fmask=337,context=u:object_r:firmware_file:s0 wait +/dev/block/bootdevice/by-name/bluetooth /bt_firmware vfat ro,shortname=lower,uid=1002,gid=3002,dmask=227,fmask=337,context=u:object_r:bt_firmware_file:s0 wait +/devices/soc/a800000.ssusb/a800000.dwc3/xhci-hcd.0.auto* /storage/usbotg vfat nosuid,nodev wait,voldmanaged=usbotg:auto +/dev/block/bootdevice/by-name/dsp /dsp ext4 ro,nosuid,nodev wait +/dev/block/bootdevice/by-name/cache /cache ext4 nosuid,nodev,noatime wait,check,formattable +/dev/block/bootdevice/by-name/persist /persist ext4 nosuid,nodev,noatime wait,check +/dev/block/bootdevice/by-name/persistbak /persistbak ext4 nosuid,nodev,noatime wait,check diff --git a/rootdir/etc/ueventd.qcom.rc b/rootdir/etc/ueventd.qcom.rc new file mode 100644 index 0000000..cdc46e7 --- /dev/null +++ b/rootdir/etc/ueventd.qcom.rc @@ -0,0 +1,302 @@ +# Copyright (c) 2012-2015, 2017, The Linux Foundation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of The Linux Foundation nor +# the names of its contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +# the DIAG device node is not world writable/readable. +/dev/diag 0660 system oem_2901 + +/dev/genlock 0666 system system +/dev/wlan 0660 wifi wifi +/dev/kgsl 0666 system system +/dev/kgsl-3d0 0666 system system +/dev/kgsl-2d0 0666 root root +/dev/kgsl-2d1 0666 root root +/dev/ion 0664 system system +/dev/rtc0 0660 system system +/dev/smd0 0660 system system +/dev/smd4 0660 system system +/dev/smd_cxm_qmi 0640 radio radio +/dev/smd5 0660 system system +/dev/smd6 0660 system system +/dev/smd7 0660 bluetooth bluetooth +/dev/ccid_bridge 0660 system system +/dev/ipa 0660 radio radio +/dev/wwan_ioctl 0660 radio radio +/dev/ipaNatTable 0660 radio radio +/dev/rmnet_ctrl 0660 usb usb +/dev/dpl_ctrl 0660 usb usb +/dev/spidev7.1 0660 system system + +#permissions for CSVT +/dev/smd11 0660 radio radio + +#permsissions for BT/FM +/dev/smd2 0660 bluetooth bluetooth +/dev/smd3 0660 bluetooth bluetooth +/dev/btpower 0660 bluetooth system + +#permissions for pta +/dev/pta 0660 system system + +/dev/radio0 0640 system system +/dev/rfcomm0 0660 bluetooth bluetooth +/dev/ttyUSB0 0660 bluetooth bluetooth +/dev/smdcntl0 0640 radio radio +/dev/smdcntl1 0640 radio radio +/dev/smdcntl2 0640 radio radio +/dev/smdcntl3 0640 radio radio +/dev/smdcntl4 0640 radio radio +/dev/smdcntl5 0640 radio radio +/dev/smdcntl6 0640 radio radio +/dev/smdcntl7 0640 radio radio +/dev/smdcntl8 0640 radio radio +/dev/smdcnt_rev0 0640 radio radio +/dev/smdcnt_rev1 0640 radio radio +/dev/smdcnt_rev2 0640 radio radio +/dev/smdcnt_rev3 0640 radio radio +/dev/smdcnt_rev4 0640 radio radio +/dev/smdcnt_rev5 0640 radio radio +/dev/smdcnt_rev6 0640 radio radio +/dev/smdcnt_rev7 0640 radio radio +/dev/smdcnt_rev8 0640 radio radio +/dev/smuxctl32 0640 radio radio +/dev/sdioctl0 0640 radio radio +/dev/sdioctl1 0640 radio radio +/dev/sdioctl2 0640 radio radio +/dev/sdioctl3 0640 radio radio +/dev/sdioctl4 0640 radio radio +/dev/sdioctl5 0640 radio radio +/dev/sdioctl6 0640 radio radio +/dev/sdioctl7 0640 radio radio +/dev/sdioctl8 0640 radio radio +/dev/rmnet_mux_ctrl 0640 radio radio +/dev/hsicctl0 0640 radio radio +/dev/hsicctl1 0640 radio radio +/dev/hsicctl2 0640 radio radio +/dev/hsicctl3 0640 radio radio +/dev/hsicctl4 0640 radio radio +/dev/hsicctl5 0640 radio radio +/dev/hsicctl6 0640 radio radio +/dev/hsicctl7 0640 radio radio +/dev/hsicctl8 0640 radio radio +/dev/hsicctl9 0640 radio radio +/dev/hsicctl10 0640 radio radio +/dev/hsicctl11 0640 radio radio +/dev/hsicctl12 0640 radio radio +/dev/hsicctl13 0640 radio radio +/dev/hsicctl14 0640 radio radio +/dev/hsicctl15 0640 radio radio +/dev/hsicctl16 0640 radio radio +/dev/mhi_pipe_14 0640 radio radio +/dev/mhi_pipe_16 0640 radio radio +/dev/mhi_pipe_32 0640 radio radio +/dev/at_usb0 0640 radio radio +/dev/at_mdm0 0640 radio radio +/dev/video* 0660 system camera +/dev/media* 0660 system camera +/dev/v4l-subdev* 0660 system camera +/dev/qseecom 0660 system drmrpc +/dev/smcinvoke 0660 system system +/dev/qsee_ipc_irq_spss 0660 system drmrpc +/dev/seemplog 0660 system system +/dev/pft 0660 system drmrpc +/dev/spcom 0660 system system +/dev/sp_kernel 0660 system system +/dev/sp_ssr 0660 system system +/dev/sp_keymaster 0660 system system +/dev/cryptoapp 0660 system system +/dev/gemini0 0660 system camera +/dev/jpeg0 0660 system camera +/dev/jpeg1 0660 system camera +/dev/jpeg2 0660 system camera +/dev/jpeg3 0660 system camera +/dev/adsprpc-smd 0664 system system +/dev/system_health_monitor 0644 radio system +/dev/mdss_rotator 0664 system system + +# fpc fingerprint +/sys/devices/soc/soc:fpc1020* hw_reset 0660 system system +/sys/devices/soc/soc:fpc1020* irq 0660 system system +/sys/devices/soc/soc:fpc1020* wakeup_enable 0660 system system +/sys/devices/soc/soc:fpc1020* fingerdown_wait 0220 system system + +# wlan +/dev/wcnss_wlan 0660 system system +/dev/wcnss_ctrl 0660 system system +/sys/devices/soc/a000000.qcom,wcnss-wlan/net/wlan0/queues/rx-* rps_cpus 0660 system system +/sys/devices/soc/a000000.qcom,wcnss-wlan/net/p2p0/queues/rx-* rps_cpus 0660 system system +/dev/spidev0.0 0660 system audio +/dev/msm_camera/* 0660 system camera +/dev/gemini/ 0660 system camera +/dev/mercury0 0660 system camera +/dev/msm_vidc_reg 0660 system audio +/dev/msm_vidc_dec 0660 system audio +/dev/msm_vidc_dec_sec 0660 system audio +/dev/msm_vidc_enc 0660 system audio +/dev/msm_rotator 0660 system system +/dev/hw_random 0600 root root +/dev/sdsprpc-smd 0660 system system + +#permissions for audio +/dev/wcd_dsp0_control 0660 system audio +/dev/wcd-dsp-glink 0660 system audio +/dev/audio_slimslave 0660 system audio +/dev/msm_qcelp 0660 system audio +/dev/msm_evrc 0660 system audio +/dev/msm_wma 0660 system audio +/dev/msm_wmapro 0660 system audio +/dev/msm_alac 0660 system audio +/dev/msm_ape 0660 system audio +/dev/msm_amrnb 0660 system audio +/dev/msm_amrwb 0660 system audio +/dev/msm_amrwbplus 0660 system audio +/dev/msm_aac 0660 system audio +/dev/msm_multi_aac 0660 system audio +/dev/msm_aac_in 0660 system audio +/dev/msm_qcelp_in 0660 system audio +/dev/msm_evrc_in 0660 system audio +/dev/msm_amrnb_in 0660 system audio +/dev/msm_amrwb_in 0660 system audio +/dev/msm_a2dp_in 0660 system audio +/dev/msm_ac3 0660 system audio +/dev/msm_audio_cal 0660 system audio +/dev/msm_hweffects 0660 system audio +/dev/msm_cad 0660 system audio +/dev/msm_fm 0660 system audio +/dev/msm_mvs 0660 system audio +/dev/msm_pcm_lp_dec 0660 system audio +/dev/msm_preproc_ctl 0660 system audio +/dev/msm_rtac 0660 system audio +/dev/msm_voicememo 0660 system audio +/dev/ttyHSL1 0660 system system +/dev/ttyHS1 0660 system system +/dev/mdm 0660 system radio +/sys/devices/virtual/smdpkt/smdcntl* open_timeout 0664 radio radio +/dev/sdio_tty_ciq_00 0660 system system +/dev/tty_sdio_00 0660 system system +/dev/ttyGS0 0660 system system +/dev/i2c-5 0660 media media +/dev/avtimer 0660 system audio + +# DVB devices +/dev/dvb/adapter0/demux* 0440 media media +/dev/dvb/adapter0/dvr* 0660 media media +/dev/dvb/adapter0/video* 0660 media media + +# Broadcast devices +/dev/tsc_mux0 0660 media media +/dev/tsc_ci0 0660 media media + +# sensors +/sys/devices/i2c-12/12-* pollrate_ms 0664 system system +/sys/devices/f9925000.i2c/i2c-0/0-* enable 0660 input system +/sys/devices/f9925000.i2c/i2c-0/0-* poll_delay 0660 input system +/sys/devices/soc.0/78b6000.i2c/i2c-0/0-* enable 0660 input system +/sys/devices/soc.0/78b6000.i2c/i2c-0/0-* poll_delay 0660 input system +/sys/devices/soc.0/78b6000.i2c/i2c-0/0-* enable_wakeup 0660 input system +/sys/devices/soc.0/78b6000.i2c/i2c-0/0-* max_latency 0660 input system +/sys/devices/soc.0/78b6000.i2c/i2c-0/0-* flush 0660 input system +/sys/devices/soc.0/78b6000.i2c/i2c-0/0-* calibrate 0660 input system +/sys/devices/soc.0/78b5000.i2c/i2c-1/1-* enable 0660 input system +/sys/devices/soc.0/78b5000.i2c/i2c-1/1-* poll_delay 0660 input system +/sys/devices/soc.0/78b5000.i2c/i2c-1/1-* enable_wakeup 0660 input system +/sys/devices/soc.0/78b5000.i2c/i2c-1/1-* max_latency 0660 input system +/sys/devices/soc.0/78b5000.i2c/i2c-1/1-* flush 0660 input system +/sys/devices/soc.0/78b5000.i2c/i2c-1/1-* calibrate 0660 input system +/sys/devices/virtual/optical_sensors/proximity ps_adc 0660 input system +/sys/devices/virtual/optical_sensors/proximity ps_poll_delay 0660 input system +/sys/devices/virtual/optical_sensors/lightsensor ls_auto 0660 input system +/sys/devices/virtual/optical_sensors/lightsensor ls_poll_delay 0660 input system +/sys/devices/virtual/input/input* poll 0660 input system +/sys/devices/virtual/input/input* pollrate_ms 0660 input system +/sys/devices/soc/78b7000.i2c/i2c-3/3-0020/input/input* secure_touch 0440 system drmrpc +/sys/devices/soc/78b7000.i2c/i2c-3/3-0020/input/input* secure_touch_enable 0660 system drmrpc +/sys/devices/soc/78b7000.i2c/i2c-3/3-0038/input/input* secure_touch 0440 system drmrpc +/sys/devices/soc/78b7000.i2c/i2c-3/3-0038/input/input* secure_touch_enable 0660 system drmrpc +/sys/devices/soc/78b7000.i2c/i2c-3/3-004b/input/input* secure_touch 0440 system drmrpc +/sys/devices/soc/78b7000.i2c/i2c-3/3-004b/input/input* secure_touch_enable 0660 system drmrpc +/sys/devices/soc/c179000.i2c/i2c-5/5-0020/input/input* secure_touch 0440 system drmrpc +/sys/devices/soc/c179000.i2c/i2c-5/5-0020/input/input* secure_touch_enable 0660 system drmrpc + +# laser sensor access +/sys/devices/virtual/input/input* enable_ps_sensor 0660 system input +/sys/devices/virtual/input/input* set_delay_ms 0660 system input +/sys/devices/virtual/input/input* do_flush 0660 system input + +# vm_bms +/dev/vm_bms 0660 system system +/dev/battery_data 0660 system system + +# wlan +/dev/wcnss_wlan 0660 system system +/dev/wcnss_ctrl 0660 system system +/sys/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/net/wlan0/queues/rx-* rps_cpus 0660 system system +/sys/devices/soc/600000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/net/p2p0/queues/rx-* rps_cpus 0660 system system + +# wigig +/sys/bus/pci/drivers/wil6210* 0000:01:00.0/wil6210/fst_link_loss 0660 wifi wifi +/sys/bus/pci/drivers/wil6210* 0000:01:00.0/wil6210/thermal_throttling 0660 system system +/sys/bus/pci/drivers/wil6210* 0000:01:00.0/wil6210/snr_thresh 0660 wifi wifi +/sys/bus/pci/drivers/wil6210* 0000:01:00.0/net/wigig0/queues/rx-0/rps_cpus 0660 system system +/sys/bus/pci/drivers/wil6210* 0000:01:00.0/net/wigig0/gro_flush_timeout 0660 system system +/sys/devices/virtual/net/bond0 queues/rx-0/rps_cpus 0660 system system + +#nfc permissions +/dev/nfc-nci 0660 nfc nfc +/dev/nq-nci 0660 nfc nfc +/dev/assd 0660 nfc nfc + +# UIO devices +/dev/uio0 0660 system system +/dev/uio1 0660 system system +/dev/uio2 0660 system system + +# SSR devices +/dev/subsys_* 0640 system system + +# Ultrasound device +/dev/usf1 0660 system system + +# Ramdump devices +/dev/ramdump* 0640 system system + +# Fingerprint device +/dev/qbt1000 0660 system system + +#ImproveTouch device +/dev/hbtp_input 0660 system system +/dev/hbtp_vm 0660 system system + +# Add device block for FRP +/dev/block/platform/soc/7824900.sdhci/by-name/config 0600 system system +/dev/block/platform/soc/7464900.sdhci/by-name/frp 0600 system system +/dev/block/platform/soc/624000.ufshc/by-name/frp 0600 system system +/dev/block/platform/soc/1da4000.ufshc/by-name/frp 0600 system system +/dev/block/platform/soc/c0c4000.sdhci/by-name/frp 0600 system system +/dev/block/platform/soc/1d84000.ufshc/by-name/frp 0600 system system + +# Kmsg device +/dev/kmsg 0620 root system -- cgit v1.2.3