From a52d635fba3e8ceb0795b5e213d89af4367acad7 Mon Sep 17 00:00:00 2001 From: Ethan Chen Date: Mon, 2 Apr 2018 22:38:42 -0700 Subject: wayne-common: Remove init.qcom.early_boot.sh * This script doesn't do anything useful, since it tries to set a lot of ro.* properties, which is not allowed anyway. Change-Id: I408cc17d0d18e81a9cf0e529e6b78622c3017a7f Signed-off-by: PIPIPIG233666 <2212848813@qq.com> --- rootdir/bin/init.qcom.early_boot.sh | 461 ------------------------------------ 1 file changed, 461 deletions(-) delete mode 100755 rootdir/bin/init.qcom.early_boot.sh (limited to 'rootdir/bin') diff --git a/rootdir/bin/init.qcom.early_boot.sh b/rootdir/bin/init.qcom.early_boot.sh deleted file mode 100755 index bba8a5f..0000000 --- a/rootdir/bin/init.qcom.early_boot.sh +++ /dev/null @@ -1,461 +0,0 @@ -#! /vendor/bin/sh - -# Copyright (c) 2012-2013,2016,2018 The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# * Neither the name of The Linux Foundation nor -# the names of its contributors may be used to endorse or promote -# products derived from this software without specific prior written -# permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -export PATH=/vendor/bin - -# Set platform variables -if [ -f /sys/devices/soc0/hw_platform ]; then - soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null -else - soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null -fi -if [ -f /sys/devices/soc0/soc_id ]; then - soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null -else - soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null -fi -if [ -f /sys/devices/soc0/platform_version ]; then - soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null -else - soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null -fi - -if [ -f /sys/class/drm/card0-DSI-1/modes ]; then - echo "detect" > /sys/class/drm/card0-DSI-1/status - mode_file=/sys/class/drm/card0-DSI-1/modes - while read line; do - fb_width=${line%x*}; - break; - done < $mode_file -elif [ -f /sys/class/graphics/fb0/virtual_size ]; then - res=`cat /sys/class/graphics/fb0/virtual_size` 2> /dev/null - fb_width=${res%,*} -fi - -log -t BOOT -p i "MSM target '$1', SoC '$soc_hwplatform', HwID '$soc_hwid', SoC ver '$soc_hwver'" - -#For drm based display driver -vbfile=/sys/module/drm/parameters/vblankoffdelay -if [ -w $vbfile ]; then - echo -1 > $vbfile -else - log -t DRM_BOOT -p w "file: '$vbfile' or perms doesn't exist" -fi - -function set_density_by_fb() { - #put default density based on width - if [ -z $fb_width ]; then - setprop vendor.display.lcd_density 320 - else - if [ $fb_width -ge 1600 ]; then - setprop vendor.display.lcd_density 640 - elif [ $fb_width -ge 1440 ]; then - setprop vendor.display.lcd_density 560 - elif [ $fb_width -ge 1080 ]; then - setprop vendor.display.lcd_density 480 - elif [ $fb_width -ge 720 ]; then - setprop vendor.display.lcd_density 320 #for 720X1280 resolution - elif [ $fb_width -ge 480 ]; then - setprop vendor.display.lcd_density 240 #for 480X854 QRD resolution - else - setprop vendor.display.lcd_density 160 - fi - fi -} - -target=`getprop ro.board.platform` -case "$target" in - "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") - case "$soc_hwplatform" in - "FFA" | "SVLTE_FFA") - # linking to surf_keypad_qwerty.kcm.bin instead of surf_keypad_numeric.kcm.bin so that - # the UI keyboard works fine. - ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin - ;; - "Fluid") - setprop vendor.display.lcd_density 240 - setprop qcom.bt.dev_power_class 2 - ;; - *) - ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin - ;; - esac - ;; - - "msm8660") - case "$soc_hwplatform" in - "Fluid") - setprop vendor.display.lcd_density 240 - ;; - "Dragon") - setprop ro.sound.alsa "WM8903" - ;; - esac - ;; - - "msm8960") - # lcd density is write-once. Hence the separate switch case - case "$soc_hwplatform" in - "Liquid") - if [ "$soc_hwver" == "196608" ]; then # version 0x30000 is 3D sku - setprop ro.sf.hwrotation 90 - fi - - setprop vendor.display.lcd_density 160 - ;; - "MTP") - setprop vendor.display.lcd_density 240 - ;; - *) - case "$soc_hwid" in - "109") - setprop vendor.display.lcd_density 160 - ;; - *) - setprop vendor.display.lcd_density 240 - ;; - esac - ;; - esac - - #Set up composition type based on the target - case "$soc_hwid" in - 87) - #8960 - setprop debug.composition.type dyn - ;; - 153|154|155|156|157|138) - #8064 V2 PRIME | 8930AB | 8630AB | 8230AB | 8030AB | 8960AB - setprop debug.composition.type c2d - ;; - *) - esac - ;; - - "msm8974") - case "$soc_hwplatform" in - "Liquid") - setprop vendor.display.lcd_density 160 - # Liquid do not have hardware navigation keys, so enable - # Android sw navigation bar - setprop ro.hw.nav_keys 0 - ;; - "Dragon") - setprop vendor.display.lcd_density 240 - ;; - *) - setprop vendor.display.lcd_density 320 - ;; - esac - ;; - - "msm8226") - case "$soc_hwplatform" in - *) - setprop vendor.display.lcd_density 320 - ;; - esac - ;; - - "msm8610" | "apq8084" | "mpq8092") - case "$soc_hwplatform" in - *) - setprop vendor.display.lcd_density 240 - ;; - esac - ;; - "apq8084") - case "$soc_hwplatform" in - "Liquid") - setprop vendor.display.lcd_density 320 - # Liquid do not have hardware navigation keys, so enable - # Android sw navigation bar - setprop ro.hw.nav_keys 0 - ;; - "SBC") - setprop vendor.display.lcd_density 200 - # SBC do not have hardware navigation keys, so enable - # Android sw navigation bar - setprop qemu.hw.mainkeys 0 - ;; - *) - setprop vendor.display.lcd_density 480 - ;; - esac - ;; - "msm8996") - case "$soc_hwplatform" in - "Dragon") - setprop vendor.display.lcd_density 240 - setprop qemu.hw.mainkeys 0 - ;; - "ADP") - setprop vendor.display.lcd_density 160 - setprop qemu.hw.mainkeys 0 - ;; - "SBC") - setprop vendor.display.lcd_density 240 - setprop qemu.hw.mainkeys 0 - ;; - *) - setprop vendor.display.lcd_density 560 - ;; - esac - ;; - "msm8937" | "msm8940") - # Set vendor.opengles.version based on chip id. - # MSM8937 and MSM8940 variants supports OpenGLES 3.1 - # 196608 is decimal for 0x30000 to report version 3.0 - # 196609 is decimal for 0x30001 to report version 3.1 - # 196610 is decimal for 0x30002 to report version 3.2 - case "$soc_hwid" in - 294|295|296|297|298|313|353|354|363|364) - setprop vendor.opengles.version 196610 - ;; - 303|307|308|309|320) - # Vulkan is not supported for 8917 variants - setprop vendor.opengles.version 196608 - setprop persist.graphics.vulkan.disable true - ;; - *) - setprop vendor.opengles.version 196608 - ;; - esac - ;; - "msm8909") - case "$soc_hwplatform" in - *) - setprop persist.graphics.vulkan.disable true - ;; - esac - ;; - "msm8998" | "apq8098_latv") - case "$soc_hwplatform" in - *) - setprop vendor.display.lcd_density 560 - ;; - esac - ;; - "sdm845") - case "$soc_hwplatform" in - *) - if [ $fb_width -le 1600 ]; then - setprop vendor.display.lcd_density 560 - setprop dalvik.vm.heapgrowthlimit 256m - else - setprop vendor.display.lcd_density 640 - setprop dalvik.vm.heapgrowthlimit 512m - fi - ;; - esac - ;; - "msmnile") - case "$soc_hwplatform" in - *) - if [ $fb_width -le 1600 ]; then - setprop vendor.display.lcd_density 560 - setprop dalvik.vm.heapgrowthlimit 256m - else - setprop vendor.display.lcd_density 640 - setprop dalvik.vm.heapgrowthlimit 512m - fi - ;; - esac - ;; - "sdm710" | "msmpeafowl") - case "$soc_hwplatform" in - *) - sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null - if [ $sku_ver -eq 1 ]; then - setprop vendor.media.sdm710.version 1 - fi - ;; - esac - ;; - "msm8953") - cap_ver = 1 - if [ -e "/sys/devices/platform/soc/1d00000.qcom,vidc/capability_version" ]; then - cap_ver=`cat /sys/devices/platform/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null - else - cap_ver=`cat /sys/devices/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null - fi - - if [ $cap_ver -eq 1 ]; then - setprop vendor.media.msm8953.version 1 - fi - ;; - #Set property to differentiate SDM660 & SDM455 - #SOC ID for SDM455 is 385 - "sdm660") - case "$soc_hwid" in - 385) - setprop vendor.media.sdm660.version 1 - esac - ;; -esac - -baseband=`getprop ro.baseband` -#enable atfwd daemon all targets except sda, apq, qcs -case "$baseband" in - "apq" | "sda" | "qcs" ) - setprop persist.vendor.radio.atfwd.start false;; - *) - setprop persist.vendor.radio.atfwd.start true;; -esac - -#set default lcd density -#Since lcd density has read only -#property, it will not overwrite previous set -#property if any target is setting forcefully. -set_density_by_fb - - -# set Lilliput LCD density for ADP -product=`getprop ro.build.product` - -case "$product" in - "msmnile_au") - setprop vendor.display.lcd_density 160 - ;; - *) - ;; -esac - -# Setup display nodes & permissions -# HDMI can be fb1 or fb2 -# Loop through the sysfs nodes and determine -# the HDMI(dtv panel) - -function set_perms() { - #Usage set_perms - chown -h $2 $1 - chmod $3 $1 -} - -function setHDMIPermission() { - file=/sys/class/graphics/fb$1 - dev_file=/dev/graphics/fb$1 - dev_gfx_hdmi=/devices/virtual/switch/hdmi - - set_perms $file/hpd system.graphics 0664 - set_perms $file/res_info system.graphics 0664 - set_perms $file/vendor_name system.graphics 0664 - set_perms $file/product_description system.graphics 0664 - set_perms $file/video_mode system.graphics 0664 - set_perms $file/format_3d system.graphics 0664 - set_perms $file/s3d_mode system.graphics 0664 - set_perms $file/dynamic_fps system.graphics 0664 - set_perms $file/msm_fb_dfps_mode system.graphics 0664 - set_perms $file/hdr_stream system.graphics 0664 - set_perms $file/cec/enable system.graphics 0664 - set_perms $file/cec/logical_addr system.graphics 0664 - set_perms $file/cec/rd_msg system.graphics 0664 - set_perms $file/pa system.graphics 0664 - set_perms $file/cec/wr_msg system.graphics 0600 - set_perms $file/hdcp/tp system.graphics 0664 - set_perms $file/hdcp2p2/min_level_change system.graphics 0660 - set_perms $file/hdmi_audio_cb audioserver.audio 0600 - ln -s $dev_file $dev_gfx_hdmi -} - -# check for the type of driver FB or DRM -fb_driver=/sys/class/graphics/fb0 -if [ -e "$fb_driver" ] -then - # check for HDMI connection - for fb_cnt in 0 1 2 3 - do - file=/sys/class/graphics/fb$fb_cnt/msm_fb_panel_info - if [ -f "$file" ] - then - cat $file | while read line; do - case "$line" in - *"is_pluggable"*) - case "$line" in - *"1"*) - setHDMIPermission $fb_cnt - esac - esac - done - fi - done - - # check for mdp caps - file=/sys/class/graphics/fb0/mdp/caps - if [ -f "$file" ] - then - setprop vendor.gralloc.disable_ubwc 1 - cat $file | while read line; do - case "$line" in - *"ubwc"*) - setprop vendor.gralloc.enable_fb_ubwc 1 - setprop vendor.gralloc.disable_ubwc 0 - esac - done - fi - - file=/sys/class/graphics/fb0 - if [ -d "$file" ] - then - set_perms $file/idle_time system.graphics 0664 - set_perms $file/dynamic_fps system.graphics 0664 - set_perms $file/dyn_pu system.graphics 0664 - set_perms $file/modes system.graphics 0664 - set_perms $file/mode system.graphics 0664 - set_perms $file/msm_cmd_autorefresh_en system.graphics 0664 - fi - - # set lineptr permissions for all displays - for fb_cnt in 0 1 2 3 - do - file=/sys/class/graphics/fb$fb_cnt - if [ -f "$file/lineptr_value" ]; then - set_perms $file/lineptr_value system.graphics 0664 - fi - if [ -f "$file/msm_fb_persist_mode" ]; then - set_perms $file/msm_fb_persist_mode system.graphics 0664 - fi - done -else - set_perms /sys/devices/virtual/hdcp/msm_hdcp/min_level_change system.graphics 0660 -fi - -boot_reason=`cat /proc/sys/kernel/boot_reason` -reboot_reason=`getprop ro.boot.alarmboot` -if [ "$boot_reason" = "3" ] || [ "$reboot_reason" = "true" ]; then - setprop ro.vendor.alarm_boot true -else - setprop ro.vendor.alarm_boot false -fi - -# copy GPU frequencies to vendor property -if [ -f /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies ]; then - gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies` 2> /dev/null - setprop vendor.gpu.available_frequencies "$gpu_freq" -fi -- cgit v1.2.3